Availability
On Sale
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$479.95
—
$549.95
$430.95
—
$493.95
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$573.95
$302.95
—
$470.95
On Sale
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$471.95
$359.95
—
$423.95
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$426.95
—
$449.95
$383.95
—
$403.95
On Sale
Complete your EFI Hi-Ram manifold with a Holley Hi-Ram intake manifold top. These intake manifold tops, along with their matching bases, are made from cast aluminum—with either a natural or black finish. They provide a cost-effective option for your high performance applications where induction system height is not limited. Get aggressive, bold styling and performance with a Holley EFI Hi-Ram intake manifold top.
Not Yet Reviewed
$474.95
$371.95
—
$474.95
On Sale
Holley EFI Gen V LT single plane intake manifolds are designed with an optimized runner layout and a constant cross-sectional area, resulting in a broad torque curve with the best vehicle performance from 2,500 to 7,000 rpm. The single-plane design provides the lowest throttle body flange height possible, while providing maximum performance all the way to 7,000 rpm. The cast aluminum construction makes these manifolds great choices for centrifugal blowers, turbochargers, or NOS applications. They are sold for pre-emissions control applications only and will not accept stock components and hardware. Available in two finishes, choose the one you prefer. Features: * Optimized runner layout and constant cross sectional area--broad torque curve * Minimum carburetor flange height--fit in vehicles with minimum hood modifications * Provides classic engine bay look of carburetor-style intake * Cast aluminum construction--great manifold for centrifugal blower, turbocharged, or NOS mild power adder applications * Efficient casting design--lightweight, consistent wall thicknesses, improved casting quality * Weight: 11.5 lbs. * Height: (front) 5.417 in. to the lifter valley cover flange at the engine block front flange and bellhousing flange * Port size: 2.33 in. height x 1.27 in. wide * FKM O-ring intake to cylinder head gaskets Notes: These intake manifolds are meant for GM Gen V LT engines equipped with OE-type GM Gen V LT cylinder heads where the intake flange bolt pattern and intake port opening locations match the OE Gen V LT port configuration. They are intended for OE direct injection and a 4150 EFI throttle body. Holley accessories available to allow the installation of a GM LS 92mm or 105mm drive-by-wire throttle body. Holley EFI Gen V LT 300-940 manifold is meant for street and performance engine applications with 5.3 to 6.2+ liters of displacement and maximum engine speeds of 6,000 to 7,000 rpm (depending on the engine combination). 4150/4160 square bore flange.
Not Yet Reviewed
$449.95
$403.95
On Sale
Put the look of the dual carburetor muscle car era on your late model Chevrolet LS Series engine. Holley LS 2x4 dual plane carbureted intake manifolds continue the tradition of the great Holley 4160 induction systems that competed on the drag strips. Their dual plane, equal-distribution layout produces great midrange torque without compromising top-end power. The manifolds feature all cast aluminum construction, a wide 1,500 to 7,000 rpm power band range, and can accept dual inline mounted square bore carburetors with 1 11/16 in. maximum diameter throttle bores.
( 1 )
$573.95
$315.95
On Sale
Holley Sniper carbureted fabricated intake manifolds are budget-friendly, sheet metal style intake manifolds. Each manifold is precision-fixtured and welded for a perfect fit and structural integrity. They are available for carbureted Chevy LS, Ford Coyote, small block Chevy, big block Chevy, and small block Ford engines. Features include: * Available for single or dual carburetor applications * 3mm (1/8 in.) thick T6061 sheet aluminum construction * More durable than competitive intakes * Bead-blasted silver or black anodized finishes * 100 percent TIG-welded * Custom Holley Sniper logo
( 37 )
$797.99
—
$912.95
$447.50
—
$502.95
On Sale
Holley Pro-Jection intake manifolds are designed for Holley 2-barrel Pro-Jection systems. The high-rise, dual-plane manifolds are perfect for powerband ranges from idle to 6,000 rpm. With these manifolds, there is no need for manifold-to-TBI adapters. To make installation easy Holley utilizes late model alternator and A/C bracket mounting bosses and include provisions for an EGR valve and vacuum taps off of the runners. Power is made easy with Holley Pro-Jection intake manifolds.
( 6 )
$433.95
—
$504.95
$328.95
—
$389.95
On Sale
Holley EFI Coyote Ultra Lo-Ram intake manifolds are designed to fit stock bolt pattern OE heads found on the 2011-23 Ford 5.0 Coyotes and related engine families, such as Voodoo and Predators. These kits include fuel rails for use with OEM-type fuel injectors and clips, mounting hardware, and O-ring gaskets. Offered in black and natural as-cast finish, the manifolds have a 9.20 in. runner length and are designed to improve the mid to high RPM powerband. The Ultra Lo-Ram provides an additional 19.4mm front and 42.6mm rear clearance compared to the Ford Performance Cobra Jet manifold—plus clears 2015-23 Mustang factory hoods. They're offered in both round and oval throttle body configurations, with replacement front inlets for easy interchangeability. The oval inlet can accommodate up to a 150 x 66mm single throttle body and 93mm on the round variant. Round inlets include standard mounting provisions for GT350, GT500, and LS 4-bolt throttle bodies. 2011-23 GT throttle bodies can be used with the optional 717-18 adapter. (NOTE: Coyote Ultra Lo-Ram intake manifolds are available with the base only, no top included, if desired. See "Intake Section Included" tabs.) Product features: * As-cast aluminum construction: more durable for boosted applications, can be welded for modifications * Modular design: accessible runner entries for porting, allows accessories like intercoolers and nitrous plates * 300-911 and 300-912 Ultra Lo-Ram will fit under stock hood with stock engine mounts in 2015-23 Mustang * Refined port design with streamlined injector boss for reduced turbulence without loss of flow area * Allows a variety of throttle valves, including large monoblade, 2015-20 GT350, 2007-14 GT500, 2019-23 GT500, GM LS 4-bolt, 2011-23 Ford Mustang GT (with optional adapter PN 717-18) * Fuel rails with -8 AN ports and dual 1/8 NPT accessory ports for gauges or Gen 3 direct injection fuel line hookup
( 1 )
$924.95
$508.95
On Sale
Fit your GM Gen V LT1 Holley Hi-Ram manifold with one of their LT Hi-Ram intake plenum tops. Holley offers several versions of these cast aluminum units for your dual 4150 or 4500 carburetors. They're available with a black or natural finish. Complete your tunnel ram intake with Holley LT Modular Hi-Ram intake manifold tops; order the model recommended for your year/make and engine application. Features include: * Modular design with removable top * Overall height: 12.10 in. with carb-style top * Height at plenum flange: 9.44 in. * O-ring seals on plenum top * Easy assembly with top-mounted screws on plenum top (all except front two screws)
( 1 )
$280.95
—
$299.95
Dual plane Holley Street Dominator intake manifolds are designed to exceed the performance of most OEM 4-barrel intake manifolds. With their low-rise or medium-rise configuration, divided plenum, and dual plane runner layout, they provide excellent low and mid-range power output--from idle up to as high as 5,200 rpm. They can take several carb types and sizes, and will enable you to maximize street performance.
( 9 )
$449.95
On Sale
Holley Hi-Ram intake manifold plenum tops are constructed of cast aluminum and offered in different finishes to match the bases. They are available in dual 4150 or 4500 pattern, or in a full blank top so that you can design your system. Choose the ideal plenum for your Hi-Ram manifold.
Not Yet Reviewed
$266.95
Holley EFI LS Fabricated Hi-Ram intake manifold tops are solutions to having limited room in the front of the engine bay. These 4mm thick aluminum plenum tops allow you to mount the throttle body on the side. This setup will allow for easier fabrication for boosted applications or for just a different look on your Hi-Ram manifold. Designed to mount on Holley's existing Hi-Ram manifold bases, they are available in silver or black finishes in throttle body patterns of either 95mm or 105 mm sizes.
Not Yet Reviewed
$449.95
On Sale
Holley Sniper EFI fabricated intake manifolds are budget-friendly and performance laden! These durable Holley hi-ram manifolds feature 3mm (1/8 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. The EFI versions have 92mm or 102mm throttle body openings, as well as runners with tapered tops to increase velocity and evenly distribute airflow. They also include 3/8 in. fuel rail kits and, of course, are branded with the Holley Sniper EFI logo. Budget and performance go hand-in-hand when it comes from Holley in the form of their Sniper EFI fabricated intakes. Order the model and options recommended for your make/engine application.
( 17 )
$849.95
—
$879.95
$467.95
—
$483.95
Holley EFI Ford Fabricated Hi-Ram intake manifold tops are solutions to having limited room in the front of the engine bay. These 4mm thick aluminum plenum tops resemble the older Ford EFI manifolds and allow you to mount the throttle body on the side. This setup will allow for easier fabrication for boosted applications or for just a different look on your Hi-Ram manifold. Designed to mount on Holley's existing Hi-Ram manifold bases, they are available in silver or black finishes in throttle body patterns of either 95mm and 105 mm sizes.
Not Yet Reviewed
$449.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$517.95
$284.95
The Holley EFI Coyote Ultra Lo-Ram plenum lids are compatible with the Holley EFI Ultra Lo-Ram base. Offering this plenum top separately allows you to select your components individually as you build your system. As-cast aluminum construction, these Ultra Lo-Ram plenum lids are more durable for boosted applications and are available in either natural or black ceramic finishes. This is the plenum top only. Select the model for your application.
Not Yet Reviewed
$299.95
On Sale
Holley throttle body intake elbows feature a dual throttle body bolt pattern, and fit any intake manifold with 4150 or Dominator mounting flange. They also have a 105mm throttle body opening and a 100 degree mounting angle with slotted mounting holes. Constructed from cast aluminum, they include a MAP sensor port cover, gaskets, and hardware.
( 13 )
$279.95
—
$799.95
$251.95
—
$439.95
On Sale
These Holley intake manifold adapter kits let you mount older intake manifolds to the newer style center-bolt cylinder heads. They include four angled spacers with matching Allen head bolts to adapt Holley intake manifolds to the new-style heads.
Not Yet Reviewed
$399.95
$359.95
Holley LS modular mid-rise intake adapter plates mate your LS dual plane mid-rise intake manifold to modular tops. These cast aluminum adapter plates will accept all of the popular Holley Hi-Ram plenum tops as a foundation for your custom induction systems to produce great mid-range torque without compromising top end power. These are great for supercharged or turbocharged engines!
Not Yet Reviewed
$319.95
On Sale
Holley Sniper EFI dual-plenum intake linkage kits are effective solutions to handle dual cable driven throttle bodies. They provide all brackets, plates, throttle cables, hardware, and detailed instructions to offer a complete and seamless installation. Linkage kits are available in a silver or black finish and 92mm and 102mm throttle bore diameters to offer solutions for all Holley Sniper dual plenum intake manifolds.
Not Yet Reviewed
$499.95
$274.95
—
$499.95
On Sale
Specifically designed for use with the Holley 8.2 in. SBF Hi-Ram intake manifold, these EFI low-profile SBF Dual Sync distributors share all the same great features of other Holley EFI Dual Sync distributors. The design includes dual Hall effect sensors for the crankshaft and camshaft signals. They can be used as just a crank speed input, as well as providing a cam sync signal for a sequential fueling operation—or to provide the needed crank and cam signals for coil-on-plug applications. The precision-machined shutter wheel design ensures accurate timing, even at very high engine speeds. Holley Sniper EFI low-profile SBF Dual Sync distributors also provide compatibility with other EFI systems that support Hall effect crank and cam sensors. Product features include: * Plug-and-play with Holley EFI * CNC-machined billet aluminum housing * Integrated LEDs allow for easy setup * Hardened steel distributor gear
( 1 )
$549.95
$493.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$499.95
$448.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
