Availability
On Sale
Holley Sniper EFI Stealth fuel crossover kits are designed to be used with either Sniper EFI Stealth 4150 or Terminator X Stealth 4150 systems. These pre-assembled fuel crossovers are designed to provide ample clearance between the fuel hose, and the TPS sensor mounted on the side of the throttle body. Available in two variations, both contain a braided fuel hose with crimp-on ends for a leak-free installation and two fuel bowl standoffs. One variation includes a T-fitting and the other a black anodized billet fuel regulator, preset to 58.5 psi, and a mounting bracket.
( 1 )
$319.95
$287.95
On Sale
Direct upgrade for existing HyperSpark ignition box, Holley Sniper EFI HyperSpark 2 CD ignition boxes feature a smaller form factor and hotter spark. These low-profile boxes can fit nearly anywhere inside of your engine bay or cockpit. They have all the proven features of their predecessor in a smaller package, making it easier to mount, providing the cleanest installation possible. HyperSpark 2 ignition boxes pack up to 150 mJ of spark energy when used with the matching ignition coil, resulting in enough energy to safely fire your Sniper EFI engine combination. Features: * Plug-and-play with existing HyperSpark installations, or Sniper EFI HyperSpark main harnesses * Includes an ignition harness for fresh Sniper EFI Installs simply wanting to add timing control * New processor and board design provide a highly efficient ignition, minimal heat, and maximum spark energy with less current draw * High rpm operation and maximum output using the HyperSpark ignition coil * Powerful capacitive discharge of multiple sparks improves performance and ensures complete combustion * Consistently high-spark energy of 135 to 150 mJ for every firing, from idle to redline rpm * Operates on most 7 to 28 V electrical systems * Fully protected against an open coil, shorted coil, and open load * 1.47 lbs. lighter than an original HyperSpark ignition box * Quickens throttle response and improves starting * Tach Output to drive an external tachometer
( 2 )
$399.95
$359.95
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$399.95
—
$525.95
$285.95
—
$472.95
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$518.95
$314.95
—
$466.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$632.95
$305.95
—
$493.95
On Sale
Holley Sniper HyperSpark ready to run small cap distributors adds plug and play ignition timing control to any Holley EFI system. This line of distributors comes with a built-in ignition coil driver, removing the need of mounting an ignition box or external coil driver. The design includes a single Hall Effect sensor providing engine rpm to the ECU. The precision shutter wheel design ensures accurate timing, even at very high engine speeds. They can also be used with other EFI systems that support a Hall Effect crank signal input. Order the model designed for your application needs. Features: * Easiest plug-and-play way to add timing control to any Sniper EFI installation * Designed to work with HyperSpark ignition coil (PN: 556-152); also compatible with most canister ignition coils using the supplied ring terminals * Built-in ignition coil driver, safely provides enough spark energy for applications up to 450 hp * Patented clear installation cap eliminates any confusion while installing the distributor * Cast aluminum distributor housing looks right at home in nearly every engine bay * Comes with cast gear installed—contact camshaft manufacturer for recommended gear material * Comes with steel gear for SBF applications with an aftermarket camshaft * Precision shutter wheel provides the ECU a clean rpm signal via a single Hall Effect sensor, ensuring accurate timing even at high engine rpm * Shutter wheel design allows for a "timed sequential" fueling strategy with Terminator X, HP, and Dominator ECU's * Includes wire retainer for a clean installation
( 2 )
$549.95
$302.95
—
$499.95
On Sale
Updating your racing fuel system to EFI is so simple! Holley Sniper presents their latest diecast fuel cell EFI pump modules designed to drop in as a direct replacement for your existing 6- or 12-bolt flange fuel cell cap assembly. The diecast aluminum top flange includes an -6AN inlet port, a -6AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep. The EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs. These fuel cell EFI fuel pump module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line. Features include: * Easy way to update your fuel cell to EFI * Designed to drop right into your existing 6-bolt flange fuel cell * Diecast aluminum top flange housing includes a -6AN inlet and -6AN outlet port and a fuel filler cap * Pump depth is fully adjustable for fitment in the most popular cell sizes 7.5 in. to 11 in. * EFI modules are available with single 340 lph fuel pumps in both return and returnless system designs
( 9 )
$424.95
$381.95
—
$475.95
On Sale
Holley Sniper GPA Series in-tank fuel pumps feature oven-brazed fittings that can withstand up to 100 psi. Designed for Sniper EFI fuel tanks, each of these electric fuel pump assemblies includes a genuine Walbro fuel pump. Additional features include: * 1/4 in. NPT supply and return line * In-tank wire harness * Heavy 10-gauge no-warp mounting plate * Barbed vent fittings
( 3 )
$475.95
$399.95
—
$427.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
