Availability
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 439 )
$374.95
—
$605.95
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 569 )
$617.95
$270.95
—
$584.95
On Sale
Edelbrock Performer RPM intake manifolds have a high-rise, dual-plane design. They produce incredible top-end horsepower, while retaining good throttle response. Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. They're intended for high performance street or competition engines that run from 1,500 to 6,500 rpm.
( 221 )
$571.95
$296.95
—
$595.95
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 313 )
$575.95
$339.95
—
$540.95
On Sale
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$463.95
—
$569.95
On Sale
Edelbrock's Torker II intake manifolds feature a single-plane, low-rise design that can give you top-end horsepower without affecting the mid-range. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
( 53 )
$497.95
$281.95
—
$497.95
Performer Air-Gap intake manifolds incorporate technology from Edelbrock's potent Victor series manifolds, with an air-gap design feature for ultimate street performance from idle to 5,500 rpm. The air-gap is an open air space which separates the runners from the hot lifter-valley cover. This results in a cooler, denser charge, meaning more power and excellent throttle response throughout the power band. Order the Edelbrock Performer Air-Gap intake manifold best suited for your application.
( 31 )
$395.95
—
$530.95
Edelbrock Performer RPM dual-quad Air-Gap intake manifolds are designed to give your ride classic hot rod looks with modern-day performance. These manifolds stand just 1 5/8 in. taller than the original Edelbrock low-profile C-26 intakes and offer superior performance improvements in the 1,500-6,500 rpm range. The large runners feature Edelbrock's unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge. These aluminum dual-quad intake manifolds are available in your choice of natural or the popular EnduraShine finishes.
( 21 )
$509.95
—
$545.95
You can give small block Chevys the nostalgic look of days gone by, as well as a healthy dose of performance, with Edelbrock's Three-Deuce intake manifolds. The balanced, 180 degree firing order arrangement of their port runners produces a broad power band that runs from idle up to 5,500 rpm, for power where you need it. In addition, they have a cast-in exhaust-gas heat riser and a front boss for an oil filler tube.
( 4 )
$540.95
—
$545.95
Edelbrock Glidden Victor Spider intake manifolds are specifically intended for use on 375 c.i.d. and higher HO drag race engines. They were developed in conjunction with noted drag racer Billy Glidden to complement the flow characteristics of fully ported 18 and 15 degree cylinder heads. The intake manifolds use either 4150 or a 4500 Series Dominator carburetor flange and dividers that have been pulled back to increase plenum size and shorten the runners for improved high-rpm performance. The runners are wider at the plenum, producing approximately 3.6 sq. in. of area at the opening. A Victor base, sold separately, is required for installation.
( 4 )
$572.95
On Sale
Edelbrock Performer RPM 5.8 EFI upper plenums are powdercoated light titanium gray and the plenum cover is removable to allow easy runner access. These Edelbrock Performer 5.8L plenums are designed for truck engines and feature a modular design that incorporates the latest air-flow technology for maximum torque gains in the mid-range. Will not fit vans.
( 2 )
$583.95
$467.16
Ideal for high-rpm drag race applications, these Victor E EFI manifolds have a larger and deeper plenum than other manifolds. They provide maximum power in the higher rpm range for engines with standard port location iron and aluminum heads. The runners have a tapered cross-section, and plenty of material at the manifold port exit allows port matching to the small port heads used in NHRA Super Stock classes. The large plenum and runner volume of these manifolds makes them ideal for alcohol-fueled applications.
Not Yet Reviewed
$577.95
Edelbrock Victor tunnel ram top is for use with 4500 series carburetors and their Victor Tunnel Ram base manifolds only. They are designed with larger openings to accommodate throttle bore sizes up to 2.31 in. without modification and are wider to accommodate the larger runners in the new manifolds. Carburetors will need to be mounted sideways in order to clear the manifold.
Not Yet Reviewed
$270.95
Edelbrock Performer RPM Marine intake manifolds are designed specifically for demanding marine applications. They feature a low-rise, dual-plane design with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and feature brass lined front water crossovers and two brass flange inserts to cover the rear water openings in the cylinder heads. The brass lined crossover and inserts protect the aluminum from salt water corrosion.
( 3 )
$605.95
Edelbrock's Torker intake manifolds feature a single-plane, low-rise design for street high-performance engines where low-end torque is not a requirement. What Edelbrock did was increase the plenum volume and alter the short-side radius of the runners, to give the air/fuel charge a straight shot at the intake valves. That straight shot produces a potent power build from 2,500 to 6,500 rpm.
Not Yet Reviewed
$562.95
Edelbrock Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.
( 116 )
$375.95
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
( 42 )
$514.95
Get maximum cooling for the street or track. Edelbrock Victor Series high-volume water pumps are designed for maximum flow and equal coolant distribution in street cars, race cars, tow vehicles, and motor homes. The aluminum pumps have CNC-machined housings with special one-way internal passages that flow more coolant at higher velocities, even at low engine speeds. The CNC-machined impellers are larger than other impellers and have curved vanes that produce greater flow with less cavitation. Other features include heavy-duty roller bearing assemblies built to withstand higher torsional loads, billet steel hubs, leakproof seals, and gaskets. Most Victor Series pumps are available in your choice of satin, black, and polished finishes, or EnduraShine.
( 175 )
$260.95
—
$448.95
Edelbrock Max-Fire distributors are ready to run right out of the box—and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. Max-Fire kits feature precision machining for a perfect fit, along with a simple 3-wire hook-up for an easy installation (with no need to run an external ignition control box). The centerless ground shaft utilizes an upper sealed roller bearing with an extra-long lower bronze Oil-Lite bushing for smooth operation. The high-output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. (Edelbrock also recommends a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's.) Each distributor includes a cap, rotor, retainer and mechanical advance curve kit. Order the model recommended for your year/make and engine application.
( 15 )
$488.95
—
$494.95
Edelbrock cylinder head gaskets provide the best sealing solution for your engine. Edelbrock relies on industry-leading manufacturers to ensure their head gaskets will provide optimum fit and sealing properties when used with Edelbrock cylinder heads. These replacement gaskets are machined from high-density materials to precise specs--for applications from the 1940s and up.
( 58 )
$281.95
These Edelbrock head gasket sets include everything you need to install Edelbrock Performer and Performer RPM aluminum heads. These sets include intake, exhaust, head, waterneck, distributor and valve cover gaskets.
( 35 )
$476.95
This Edelbrock Victor Jr. LS1 EFI Intake Manifolds are a high-rise single plane design capable of supporting up to 600 hp. Like the Edelbrock Performer RPM LS1 intakes, these Victor Jr. LS1 EFI manifolds accept a standard flange throttle body. These manifolds also include a throttle bracket designed to work with 700R-4, 200R-4 and Turbo 350 transmissions. Most applications will require hood modification.
( 2 )
$509.95
On Sale
Drag racing legends have relied on Edelbrock intakes for years, and now you Honda®/Acura® guys can, too. These JG/Edelbrock Victor X intake manifolds will build horsepower in the 7,000 to 10,000 rpm range--perfect for naturally aspirated turbocharged or nitrous B-Series engines. Plus, they're 7 1/2 lbs. lighter than your stock manifold, accept oversized throttle bodies, and come with four extra bosses to handle nitrous or fuel injectors.
Not Yet Reviewed
$638.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
