Availability
Optimized for your diesel, aFe Large Bore-HD turbo downpipes are constructed of mandrel-bent 409 stainless steel with OE-style hangers and clamps. These 4 in. downpipes provide maximum flow for increased horsepower, torque, and throttle response. The increased airflow also lowers EGTs and helps improve MPG. aFe includes all hardware and components for a no-trouble installation. Give your competitive spirit an upgrade with an aFe Large Bore-HD turbo downpipe.
Not Yet Reviewed
$325.50
Optimize your diesel's performance with a non-restrictive aFe Atlas turbo downpipe. Engineered to outflow and outperform the restrictive OE down-pipe on your vehicle, they are designed with 3 in. mandrel-bent steel tubing offering smoother transition bends for low turbulence, increased airflow, and quicker turbo spool times. aFe Atlas turbo downpipes utilize factory mounting locations for true bolt-on performance and feature high-quality, OE-style V-band flanges for a complete 360-degree leak-free sealing surface. GM pipes are coated with a black finish and wrapped in high-temperature thermal header tape for better insulation, reducing EGTs and underhood temperatures.
Not Yet Reviewed
$273.00
The aFe Power Mach Force XP turbo downpipes are 100 percent TIG-welded and engineered to perform in the most extreme environments. They use a stepped design that increases exhaust velocity and eliminates low pressure drops—which helps to scavenge the exhaust for increased intake charge and more power. The downpipes are constructed from ceramic coated 3 in. mandrel-bent 409 stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, quicker turbo spool times, and lower EGTs. They're designed using a resonance chamber to reduce the in-cab resonance found with other downpipes. All hardware and brackets are included for a hassle-free installation. Order the downpipes recommended for your vehicle. Additional notes: * Race proven strength and durability * Utilizes the factory mounting locations, providing stability and a direct fit * High-quality OE-style CNC-machined flanges are used for a complete 360 degree sealing surface * Downpipe is ceramic coated inside and out. Developed by the aerospace industry, this coating is used to lower underhood temperatures by insulating the stainless steel tubing. The satin aluminum finish is chip- and heat-resistant up 1,600 degrees F * Available in natural or polished finish
Not Yet Reviewed
$441.00
aFe Takeda turbo inlets are available to fit your OE, Takeda, or aFe air intakes. All are designed to remove restrictions, improve airflow to the turbo to gain maximum power, and offer a hassle-free installation by including any necessary clamps or hardware. aFe Takeda turbo inlets feature reinforced silicone couplings with 3-layers of polyester providing heat resistance and excellent protection against wear and deterioration. Turbo inlets will be high-quality cross-linked polyethylene (XLPE) to resist heat and impact, paired with silicone couplings or silicone inlets with CNC-machined and anodized billet aluminum adapters. Choose the aFe Takeda turbo inlet to fit your application.
( 1 )
$408.00
aFe BladeRunner turbo inlet manifolds increase performance to your engine while increasing air flow over the factory turbo inlet. BladeRunner turbo inlet manifolds also improve turbo spool up times and lowers exhaust gas temperature (EGT). They're constructed of durable A356-T6 aluminum and use the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. BladeRunner manifolds come complete with all necessary mounting hardware.
( 4 )
$441.00
aFe Scorcher GT modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin on-the-fly power adjustments. The four power settings are adjustable with one button, and the LED light indicates the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher GT modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure, improving vehicle efficiency, power, and throttle response. The tuner components are housed in a black powdercoated aluminum casing—with connectors that require no modification to your factory harness; they plug directly into the stock wiring harness connectors and sensors. Order the computer module designed for your vehicle application.
( 1 )
$361.00
—
$499.00
Get the most out of your diesel truck performance with aFe BladeRunner intercooler pipes. The connecting arms are fully mandrel-bent stainless steel or aluminum tubing that will outflow factory pipes, giving you more power and fuel efficiency. The intercooler pipes free-flowing design aids in decreasing EGTs to help protect your motor from power-robbing heat. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system. The kits come complete with the hardware needed for installation, and a powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes!
( 18 )
$257.25
—
$541.80
aFe Magnum Force Pro Dry S Stage 2 Si air intake systems feed your engine clean, cool air—and lots of it! These systems feature fully sealed intake housings that keep out warm air under the hood and bring in cooler outside air for a denser intake charge. They're fitted with a heat-insulating molded plastic intake tube and a unique turbo adapter that funnels air into the turbo for improved volumetric efficiency and maximum performance, while lowering intake air temperatures. And, keeping the air clean is the patented 360 degree Pro Dry S performance cone filter. With three layers of fine mesh synthetic oil-free media and polyurethane construction, these conical filters will last a long time and through multiple cleaning cycles. Assembly and installation are easy, as these systems use factory mounting points. Flow maximum oxygen to your engine with these Magnum Force Pro Dry S Stage 2 Si air intake systems from aFe.
( 3 )
$350.00
—
$499.00
Gain more control over your boost with these aFe BladeRunner wastegate actuators. The actuator controls when your wastegate is open or shut so that your turbo is able to maintain its maximum boost level throughout the rev range. These actuators have been developed to be direct OEM replacement parts that bolt up to the same location as your stock, but have been preset to 40 psi and require little to no adjustment. The body is made out of durable T6061 aluminum and features a black anodized finish that looks great and helps to protect them from heat and the elements. The fully adjustable actuator arm makes fitment and adjustments easy. Don't waste any more boost or power--upgrade to one of these aFe BladeRunner wastegate actuators today.
( 2 )
$266.70
BladeRunner intake manifolds from aFe Power provide smooth and direct airflow for minimal pressure loss and maximum CFM gains. How do they do it? With innovative MDV technology that uses smooth bends and directional vanes to form multiple paths through the manifold. These paths are smoother and shorter, producing much smaller dead air zones, for increased overall airflow to the engine. You can also expect faster turbo spool-up, improved boost pressure, and an increase in horsepower and torque! BladeRunners are available in configurations for a wide range of vehicles from the 1990s and up. Additional features include: * Proprietary internal bolt design guaranteed not to deform or leak * Cast A356-T6 aluminum construction * Up to 5 port pads (depending on application) threaded for 1/8 in. NPT * Stainless steel hardware
( 5 )
$379.05
—
$498.75
aFe Scorcher HD modules include a high-quality case and wire harness with factory-style connectors for an easy plug-and-play installation. An LED light switch provides in-cabin, on-the-fly power adjustments. The four power settings are adjustable with one button and the LED light represent the settings: stock (green), sport (yellow), sport+ (orange) and race (red). The aFe Scorcher HD modules add significant power by altering pressure sensor signals to increase turbo boost and fuel pressure to improve vehicle efficiency, power, and throttle response. They use a high-quality aluminum extrusion black powdercoated enclosure casing and factory-style connectors which requires no modification to your factory harness. These factory-style connectors plug directly into the stock wiring harness connectors and sensors.
( 2 )
$282.00
—
$461.00
BladeRunner exhaust manifolds from aFe are made from 304 stainless steel and feature a one-piece design with reinforced ribs between each exhaust port. This increases strength and eliminates the cracking found in most stock and aftermarket units. These manifolds feature two EGT probe ports, a thick wall design for increased strength, matched ports, and a merged runner design to maximize exhaust flow. Once you've installed a BladeRunner on your ride, you'll be able to feel improved turbo spool-up times, throttle response, and decreased EGTs. For top performance, choose an exhaust manifold from aFe.
( 5 )
$499.00
The aFe Scorcher HD Plus modules are a plug-and-play power module that utilizes OE-style connectors and are a simple upgrade providing instant performance gains and enhanced drivability at the press of a button. Combining the advantages of aFe's Scorcher power modules with a built-in throttle enhancer, the Scorcher HD Plus is your ticket to a finely tuned driving experience. With this all-in-one unit, your performance gains won't be dulled by a lazy throttle pedal that all newer vehicles are plagued with from the factory due to the drive-by-wire system. The aFe Scorcher HD Plus power modules are equipped with four distinct power settings, each paired with a corresponding throttle configuration to give you the ability to fine tune your vehicle's performance. Whether you're cruising in Sport mode or tapping into your vehicle's full potential in Race mode, the in-cabin switch offers seamless control, making your vehicle's performance truly tailored to the driving conditions and your driving style. Features: * High-quality case and wire harness with OEM style connectors * Quick plug-and-play installation—simply plug into your vehicles' corresponding sensors and gas pedal * The installation does not require splicing wires or any modification of the vehicle's electrical system, keeping all factory connections intact * Included LED controller mounts in the cabin for easy on-the-fly selection of the four distinct power settings and their corresponding throttle configuration: Stock (Green), Sport (Yellow), Sport+ (Orange), Race (Red) * In-cabin on-the-fly power adjustment via LED light switch * Increase turbo boost, fuel pressure, and throttle position sensor signal to improve vehicle performance, efficiency, and throttle response * Dyno tested and produced power increases of +33 hp and +77 lbs. x ft. torque * Installation can be easily reversed in minutes should the module need to be removed—leaves no trace on ECU (no footprint) * Compatible with other aFe Power performance products
Not Yet Reviewed
$499.00
aFe Scorcher modules are designed to alter the pressure sensor signals to increase boost to an optimum level throughout the entire rpm range. The result is a harmonious balance between power, throttle response, and drivability. These modules provide a hassle-free installation with no cutting, drilling, or splicing required. In addition, vehicle factory electronic accessories are not affected by aFe Scorcher modules installation. Order the aFe Scorcher module that is best suited to fit your application needs. aFe Scorcher module features include: * Durable aluminum enclosure * Blue LED power light * OEM-style connectors * Direct plug-and-play power * High-temperature wire jacket material * Increases turbo boost to improve vehicle performance * Optimized for max performance when used with other aFe products (sold separately)
Not Yet Reviewed
$297.00
aFe Magnum Force Super Stock Pro Dry S systems increase air flow, horsepower, and torque to offer your ride a new level of power and performance. These aFe systems include intake tubes, one-piece mandrel-bent tubing with durable wrinkle black powdercoat that directs unrestricted airflow from the massive filter to the turbo for more horsepower and torque. aFe Magnum Force Super Stock Pro Dry S air intake systems are direct bolt-on kits that require no cutting or drilling for the installation, and all clamps, couplings, and hardware are included. Features of aFe Magnum Force Super Stock Pro Dry S intake systems: * Pro Dry S filter features 3-layers of progressive media to provide maximum flow with excellent filtration (progressive layering of media allows the filter to flow at high levels even when dirty * Pro Dry S non-oiled synthetic air filter requires no oils for cleaning for maximum convenience * Silver Bullet throttle body spacer is precision machined from 6061 T-6 billet aluminum for lightweight, high-strength, and the perfect fit and finish * Serrated/Helix design of spacer creates air turbulence in the intake manifold to increase the air pressure in the combustion chamber resulting in increased horsepower, torque, and improved throttle response * Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs
( 2 )
$310.00
aFe Large Bore-HD exhaust systems are constructed from mandrel-bent 409 stainless steel tubing with high-quality band clamps and OE-style bayonet hangers. They use factory mounting locations to provide a quick, hassle-free installation. Also included with many of these diesel systems is a massive wrinkle-black powdercoated or polished 304 stainless steel tip with a laser-cut stainless steel aFe power badge. aFe Large Bore-HD exhaust systems are the perfect combination of performance, fit, and value and feature: * Leak-free 360 degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Large diameter tubing provides maximum flow * Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs) * Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (most applications) * Available in DPF-back, cat-back, turbo-back, and downpipe-back configurations (varies by model) * Select systems include dual outlets and exhaust tips Note: Some of these systems are "Race Only" products sold solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 12 )
$339.15
—
$541.80
Outflow your factory intake and increase horsepower and torque with aFe Aries Stage 2 Si air intake systems. These powersports kits outfit your Side x Side with a unique one-piece housing, mandrel-bent tubing, premium hardware, and a large Pro-Guard 7 performance air filter for maximum filtration and engine protection. They are designed with fewer parts for a quick and simple installation. aFe Aries Si systems feature: * One-piece sealed high-quality rotationally molded housing eliminates the use of multiple components, ensures the coolest air intake charge available, and incorporates a uniquely designed snorkel adaptor that accommodates most aftermarket high-rise snorkel systems for deep fording capabilities * Aluminum one-piece mandrel-bent intake tube directs unrestricted airflow from the filter for more horsepower and torque * Clearcoated aluminum cover finishes off the intake and allows quick, easy access for filter servicing * 3-angle adapter is used to speed up the airflow after the air filter for improved performance and throttle response * High-quality clamps and couplings ensure the most secure installation available * Pro-Guard 7 filter uses 5-layers of progressive cotton media and 2-layers of progressive synthetic media providing 99.7 percent cumulative efficiency for maximum protection
Not Yet Reviewed
$384.00
aFe Takeda Momentum Pro Dry S cold air intake systems provide extreme performance without compromising style. Outflow your factory intake, and allow your car's engine to breathe and perform to its greatest potential with aFe Takeda Momentum systems. Features include: * High-quality, one-piece, roto-molded sealed housing with auxiliary air inlet * Housing is heat soak-resistant cross-linked polyethylene * CAD-designed, dyno-tuned, roto-molded intake tube * Built-in sight window provides easy inspection of filter without disassembly (not on all styles) * Pro Dry S 3-layer oil-free progressively finer synthetic media for efficient filtration * Unique filter-to-housing interface for easy installation * No cutting or drilling on factory parts * Premium clamps and hardware are included * Stainless steel clamps and a silicone coupling for strength and durability (not on all styles) * Takeda Momentum intakes are designed with fewer parts for a quick and simple installation
( 3 )
$420.00
The aFe Rock Basher exhaust systems are durable, purpose-built cat-backs for the 2018 Jeep Wrangler JL. They improve clearance over rough terrain for the adventurist who wants it all. The large 3 in. mandrel-bent 409 stainless steel tubing outflows restrictive factory exhausts, delivering gains of up to 9 hp and 8 lbs.-ft. of torque, as measured on aFe's in-house dyno. The free-flowing muffler delivers a power performance tone, while the Rock Basher's unique pre-axle turn-down tip handles off-road obstacles. These exhaust systems utilize factory mounts for a quick and easy install.
( 2 )
$428.40
—
$523.95
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$420.00
—
$433.00
aFe Magnum Force Stage 2 Si Pro 5R intake systems are CAD-designed and sealed for maximum power. These systems are fully enclosed in a heat-shielding molded plastic housing that features an auxiliary inlet duct for better airflow, plus an attractive brushed aluminum cover. Also featured is aFe's heat-insulating molded plastic tube that replaces your stock intake tract. These specially designed tubes flow more air with improved volumetric efficiency for maximum performance. Keeping the air clean are the deep open pleats of their Pro 5R washable and reusable oiled filters constructed of high-quality materials. These systems install easily without drilling or cutting. Bolt on a better way to feed your engine clean air with aFe Magnum Force Stage 2 Si Pro 5R intake systems.
( 5 )
$433.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
