Free Shipping on Orders Over $109 at Summit Racing

ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines

ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires

3.78 out of 5 stars ( 9 )

$3,625.99

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

ATK High Performance GM 350 Vortec 315 HP Stage 1 Long Block Crate Engines

Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.78 out of 5 stars ( 9 )

$2,988.99

ATK High Performance GM 350 Vortec 350 HP Stage 1 Long Block Crate Engines

Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. ATK GM 350 Vortec 350 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

5.0 out of 5 stars ( 7 )

$3,334.99

ATK High Performance GM 350 Vortec 350 HP Stage 3 Long Block Crate Engines

Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

5.0 out of 5 stars ( 1 )

$4,624.99

VEGE Chevrolet 350 C.I.D. Vortec Remanufactured Long Block Crate Engines

VEGE Chevrolet 350 C.I.D. Vortec remanufactured long block crate engines are reverse engineered to ensure that any original defects are removed, saving you time and money. Each crate engine can produce 290+ hp and 375+ ft.-lbs. of torque when it's equipped with a high-rise dual plane intake and 650 cfm carburetor. Start your budget-minded build with an excellent foundation--a VEGE Chevrolet 350 c.i.d. Vortec remanufactured long block crate engine. Engine specifications: * Block: Seasoned GM 350 c.i.d. block -- 2-bolt main -- One-piece rear seal * Bore/stroke: Up to 4.060 in. x 3.480 in. * Displacement (cu.in): 350 c.i.d. * Crankshaft: OE cast * Rods: OE reconditioned PM rods * Pistons: Hypereutectic 9.4:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: -- 191/194 at 50 -- .414 intake/.428 exhaust -- 111 LSA * Cylinder heads: -- OE Vortec 64cc -- 1.94 intake/1.50 exhaust * Rocker arms: Stamped steel 1.5 ratio * Oil pan: Stock 5 qt. * Valve covers: Chrome center bolt * Timing cover: Chrome Note: Can work with factory Vortec system or used as a retrofit with Vortec dual plane intake and carburetor.

Not Yet Reviewed

$3,099.99

AFR 190cc Vortec Eliminator Street Cylinder Heads

AFR 190cc Vortec Eliminator Street cylinder heads have exceptional flow characteristics, are 50-state street legal, and the preferred choice over rebuilt factory heads. They feature 100 percent CNC-ported chambers, A356 aluminum castings, and high-quality components. These heads are recommended for street, strip, and towing engines operating up to 6,000 rpm from 350 to 383 cu. in. For performance, strength, and ease, install AFR 190cc Vortec Eliminator Street cylinder heads. Additional features include: * 3/4 in. extra-thick head deck * 2.020 in. intake and 1.600 in. exhaust valves * Center and perimeter valve cover bolt patterns * 0.100 in. raised exhaust port * Not compatible with self-aligning rocker arms

4.5 out of 5 stars ( 4 )

$2,185.00

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.11 out of 5 stars ( 127 )

$2,500.95

Edelbrock E-Force Supercharger Kits

Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.

4.11 out of 5 stars ( 9 )

$3,644.95

Edelbrock Pro-Flo 4 XT EFI Systems

Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.59 out of 5 stars ( 22 )

$2,878.95

—

$2,986.95

BluePrint High Torque GM 377 C.I.D. Base Stroker Long Block Crate Engines

BluePrint high torque GM 377 c.i.d. base stroker long block crate engines will provide you a great foundation to return your vehicle to the performance level you desire. They feature a new one-piece rear main BluePrint engine block with 4-bolt mains. Inside the block is a cast crankshaft and connecting rod rotating assembly, with 9.1:1 compression hypereutectic pistons. The full roller camshaft provides 0.481 intake/0.480 exhaust lift with 187 intake/193 exhaust duration at .050 with a 97 degree lobe separation. The engines also include a new oil pan, a set of valve covers, and a timing cover to finish them off. We purchased the last of these new-in-the-box engines from Blueprint. This means we cannot extend a warranty from the manufacturer; however, we do offer our standard 90-day handshake guarantee. This is a last chance opportunity, once they're gone we won't be able to order more--so grab one while you can! Engine specifications: * All new and dyno tested 377 c.i.d. small block Chevy compatible engine * Cast crankshaft with hypereutectic pistons * 4.000 in. bore and 3.750 in. stroke * Aluminum heads with 67cc chamber, 1.500 in. exhaust, and 1.940 in. intake valve * Accommodates 8- or 12-bolt intake manifolds * Requires electric fuel pump (not machined for mechanical fuel pumps) * Harmonic balancer included

4.0 out of 5 stars ( 2 )

$4,799.99

FiTech Ultra Port EFI SBC Systems

FiTech offers Ultra Port EFI SBC systems for a wide range of Chevrolet engine applications from the 1950s, '60s, '70s, and '80s. These fuel injection systems are compatible with a variety of fuels, including gasoline, Flex, alcohol, and methanol. Depending on the model you select, the units are rated for 500, 750, or 1,000 hp with gas. Their cast aluminum throttle bodies come in a polished, black, or gold finish. Order the Ultra Port EFI small block Chevy system recommended for your vehicle.

Not Yet Reviewed

$2,499.00

On Sale

FiTech Go Port EFI Complete Fuel Injection Systems

FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.

3.67 out of 5 stars ( 3 )

$2,099.00

World Products 8.1 Liter Direct Replacement Blocks

World Products 8.1L engine blocks are direct replacements with all the OE fitments and accessory mounts. The 8.1L engine is no longer in production—and until now, there have been no replacements available. These engines are common in trucks, motor homes, marine, and industrial applications. Like all of World's blocks and heads, the 8.1L is American-made. New digital inspection equipment and quality verification procedures ensure dimensional accuracy—and mean you can be assured of total quality and superior performance.

Not Yet Reviewed

$3,842.02

Summit Racing™ All New 300 HP Small Block Chevy 350 Crate Engines

These Summit Racing™ 350 small block Chevys are 100% new, including their blocks! No remanufactured parts are used to build these engines. They are built with new Vortec head castings that are not prone to cracking like the factory ones, and produce a reliable 300+ horsepower/375+ lbs.-ft. torque, providing a mild muscle car tone. These engines are assembled for us by the guys at ATK, and backed with their 2-year unlimited mile warranty for peace of mind.

Not Yet Reviewed

$4,499.99

ATK High Performance GM 383 Stage 1 Marine Long Block Crate Engines

Replace the tired small block in your boat with ATK High Performance GM 383 Stage 1 marine long block crate engines. They are built from the ground up with off-shore performance in mind. These hand-built and balanced engines utilize Vortec power and stroker torque to produce an awesome 345 hp and 445 ft.-lbs. of twist that will get you moving on the open water. Each engine features brass freeze plugs and corrosion-resistant marine gaskets to keep the engines healthy and reliable. ATK GM 383 Stage 1 Marine long block crate engines include: * Handpicked, remanufactured blocks * Dart Iron Vortec cylinder heads * Nodular steel crankshaft and 4340 I-beam connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

5.0 out of 5 stars ( 5 )

$4,417.99

AFR 180cc SBC Eliminator Street Heads

AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.

4.78 out of 5 stars ( 9 )

$2,126.00

Vortech V-7 Series Superchargers

Vortec V-7 Series superchargers incorporate superior design with the manufacturing and testing that make Vortech famous. These superchargers use precision-ground gears to drive their impellers, so the impeller requires minimum clearance. This contributes to Vortech's superior efficiency and durability. The V-Series superchargers are available in two trim levels, so you are sure to get the right setup for your application.

Not Yet Reviewed

$4,567.99

—

$4,805.99

ATK High Performance GM 383 Stroker 375 HP Stage 1 Long Block Crate Engines

Pack stroker power and torque in your ride with ATK High Performance GM 383 stroker 380 hp Stage 1 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. ATK GM 383 Stroker 380 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Dart Iron Vortec style cylinder heads * Nodular iron crankshaft and 4340 I-beam connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Cam lift- .495 int./.502 exh. * Cam duration at 0.50- 220 int./224 exh. * 9.5:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

Not Yet Reviewed

$4,498.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.74 out of 5 stars ( 76 )

$2,029.99

—

$4,859.99

ATK High Performance Chevy LM7 5.3L 385 HP Long BLock Crate Engines

With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385

4.93 out of 5 stars ( 15 )

$4,189.99

ATK Marine Rebuilt Long Block Engines

ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs

4.4 out of 5 stars ( 45 )

$2,997.99

Edelbrock Total Power Package 435 HP Small Block Chevy Top-End Engine Kits

The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.

4.43 out of 5 stars ( 7 )

$4,285.95

—

$4,527.95

Banks Power GM 2001-10 8.1L Workhorse Motorhome PowerPack Systems

RV power! Banks PowerPack systems for your GM 2001-10 8.1L Workhorse motorhome have everything you need for dramatic power gains. Your PowerPacked coach will pass, merge, and climb without breaking a sweat or high-octane gas! These systems feature Banks Power's revolutionary Ram Air intake system (available for W-Series chassis only) that delivers greater airflow and air density for more power. The OttoMind programmer provides "power on demand" responsiveness and displays 16 critical Workhorse engine functions. Completing the systems is a pair of stainless steel tuned-length TorqueTubes for stunning torque output when you want it the most. You're on the road again, but with the pleasure of added power when a Banks PowerPack system is bolted to your Workhorse.

Not Yet Reviewed

$2,769.00

—

$3,349.00

27 Results Found For "vortec"