Free Shipping on Orders Over $125 at Summit Racing

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.18 out of 5 stars ( 92 )

$2,049.95

—

$3,399.95

Holley Terminator X Max Stealth 4150 EFI Fuel Injection Systems

Holley Terminator X Max Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Max Stealth 4150 systems provide transmission control for later model GM 4L60E and 4L80E transmissions.

4.0 out of 5 stars ( 4 )

$2,399.95

—

$2,819.95

Holley Terminator X Stealth 4150 2X4 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 2x4 EFI systems feature eight 100 lb./hr. fuel injectors capable of supporting up to 1500 hp naturally aspirated or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Features: * Bolt-on 2x4 4150 flange carburetor replacement * Internal 1bar MAP sensor, built into the Terminator X ECU External fuel pressure regulator required, set to a base pressure of 58.5 psi * Integrated ignition timing control * High-resolution, full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--answer a few questions about your engine, and it creates the base map, then starts tuning on its own without the use of a laptop * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and Fuel Pressure regulator, for years of dependable service * Weld-in oxygen sensor bung for the exhaust ensures a leak-free oxygen sensor install * Plug-and-play with Holley EFI accessories * Available in three finishes: Shiny, Black, and Gold

3.0 out of 5 stars ( 2 )

$3,149.95

Holley Terminator X Stealth 4500 EFI Fuel Injection Systems

Holley Terminator X Stealth 4500 EFI systems feature eight 100 lb. fuel injectors capable of supporting up to 1,500 hp naturally aspirated or 1,250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control—improving idle stability, drivability, and wide-open throttle horsepower! They are designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, enabling you to easily convert your 4500 equipped 800+ horsepower dragster or door car. Choose from a black or polished aluminum body.

Not Yet Reviewed

$2,919.95

Holley Terminator X Stealth 4150 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!

4.0 out of 5 stars ( 9 )

$2,509.95

Holley Terminator X MAX Stealth 4150 24X LS EFI Fuel Injection Systems

Holley Terminator Max X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * (4) inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * (4) Outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in 3 finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

Not Yet Reviewed

$2,819.95

Holley Terminator X Max GM Gen V LT Direct Injection Kits

Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.

Not Yet Reviewed

$3,149.95

—

$3,649.95

Holley Terminator X Stealth 4500 2x4 EFI Fuel Injection Systems

Holley Terminator X Stealth 4500 2x4 EFI fuel injection systems feature eight 100lb./hr. fuel injectors capable of supporting up to 1,500 hp naturally aspirated or 1,250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Holley Terminator X Stealth EFI systems are designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, allowing you to easily convert your 4500 equipped 800+ hp dragster or door car! Features: * Bolt-on 4500 flange carburetor replacement for 2x4 intake manifolds * 2.125 in. throttle plates flow 1,440 cfm each for large cubic inch engines * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange offering many air cleaner options * Universal engine harness allows you to easily install the Terminator X 2x4 4500 system on a wide variety of engine combinations * Timing control support integrated within the ECU using supporting components * High-resolution, full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--laptop not required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * Weld-in oxygen sensor bung for the exhaust ensures a leak-free installation * Plug-and-play with Holley EFI accessories (Pro Dash; CAN EGT; and Digital Analog-style EFI gauges) * Available in two finishes, Shiny and Black

Not Yet Reviewed

$3,749.95

Holley Terminator X Stealth 4150 24X LS EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 24X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 24X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

Not Yet Reviewed

$2,299.95

Holley Terminator X Stealth 4150 58X LS EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

Not Yet Reviewed

$2,299.95

Holley Terminator X MAX Stealth 4150 58X LS EFI Fuel Injection Systems

Holley Terminator Max X Stealth 4150 58X LS EFI systems feature four 100 lbs./hr. fuel injectors capable of supporting up to 650 hp naturally aspirated or 600 hp on forced induction applications. The Terminator X ECU provides fuel maps that self-learn and integrated ignition timing control, yielding improved idle stability, drivability, and horsepower at wide-open throttle! Holley Terminator Max X Stealth 4150 58X LS EFI fuel injection systems also include transmission kick-down provisions for GM TH350/400, 200R4/700R4, and Ford C4/C6 applications, as well as plug-and-play transmission control for GM 4L60 and 4L80 applications. System features include: * All wiring exits below the fuel injector bowls for a complete stealth installation * Air entry machined to fit most stock-style air cleaners with air cleaner locator provisions * Integrated ignition timing control offers plug-and-play with factory LS coil sub-harness and OEM LS coils (no external boxes/modules needed to run coil near plug) * High-resolution, full-color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard—no laptop required * Four inputs (12 V, ground, 5 V, and frequency) for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (fuel and oil pressure inputs are pre-terminated) * Four outputs (ground, PWM -) for accessories such as fans, boost control, nitrous control, IAC kit, and more * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC for years of dependable service * Available in three finishes: shiny, black, and gold * Compatible with Holley EFI digital dashes, gauges, and fuel system accessories

5.0 out of 5 stars ( 1 )

$2,819.95

Holley Terminator LS Plug-and-Play Multi-Port Systems

Take control of your engine a Holley Terminator LS plug-and-play multi-port engine management system. They include all the necessary parts to control the fuel, spark, 4L60/4L80E or 4L60E/4L80E transmission, the vehicle's drive-by-wire, or some combination of those (depending on the application) on your stock or mild LS. Order the model recommended for your year/make and engine application. Holley Terminator LS plug-and-play multi-port systems include: * Terminator EFI ECU * Terminator hand-held controller with 3.5 in. full-color touch screen * Main power harness * Main engine harness * Injector harness * Other harnesses as required by the application * Oxygen sensor with fitting

4.0 out of 5 stars ( 1 )

$2,819.95

—

$4,449.95

Holley Replacement Terminator EFI Engine Control Modules

Bolt-on Holley replacement Terminator EFI engine control modules, answer a few basic questions, and let the Terminator EFI take control of your ride! The modules require no laptop--they self-tune instantly to deliver the perfect air/fuel mixture in real time for optimized fuel economy and power.

Not Yet Reviewed

$2,254.95

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.48 out of 5 stars ( 96 )

$2,609.95

—

$3,019.95

Go Lithium 16 V GEN2 Battery and Charger Packages

Are you racing with intelligent power? You should be. Go Lithium 16 V Gen2 battery and charger packages contain lithium racing batteries specifically designed for Drag and Circle Track racers, allowing you to race with a hotter, more consistent ignition spark and no fear of detonation. With an ultra-light weight of 9 lbs. to their incredibly flat energy discharge curve, faster cranking speed, ultra hot ignition spark, and higher sustained voltage, you will be making the same horsepower from the green to victory circle, whether Drag or Circle Track racing. Power, weight, reliability, and a head-turning price you'll love, shouldn't your performance choice be Go Lithium racing batteries? Go Lithium Intelligent Power racing battery packages include high-speed charger with either one or two batteries. Choose your kit. Batteries feature: * No internal wiring * Large scale, high-strength, threaded billet terminals * 1,250 cranking * 20-amp hours of reserve power * Superior prismatic cell technology * 10-year service life * Internal battery management circuitry * Zero voltage sag * Alternator compatible—100 amp maximum with maximum charge voltage of 17.75 * Small impact- and water-resistant case--8.75 in. x 6.95 in. x 3.00 in. Chargers feature: * 16 V high-speed charger * 20-amp hour charge rate * Microprocessor controlled * Multiple LED State of charge indicator * Reverse Polarity Protection Full 1-year replacement and 3-year prorated warranty for any manufacture defects!

Not Yet Reviewed

$2,185.00

Holley HP EFI ECU and Harness Kits

Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff

4.44 out of 5 stars ( 25 )

$2,609.95

—

$2,869.95

Edelbrock Pro-Flo 4 EFI Systems

Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.11 out of 5 stars ( 127 )

$2,266.95

—

$3,239.95

Holley EFI Digital Pro Dash Standalone Kits

Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included

5.0 out of 5 stars ( 3 )

$2,299.95

Edelbrock Pro-Flo 4 XT EFI Systems

Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.59 out of 5 stars ( 22 )

$2,645.95

—

$2,986.95

Aeromotive VaporWorx Standalone KPM1500 Fuel Pump/Returnless Pulse Width Modulation Control Systems

Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)

Not Yet Reviewed

$3,019.82

Haltech Elite 2500 ECU with Premium Universal Wire-In Harness

Haltech offers a variety of engine management systems, including the Elite 2500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 2500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software * Outputs: Up to 8 injector and 8 ignition * Suits: Recommended for 4, 6, 8-cylinder, Drive-by-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts * Includes: Elite 2500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. USB programming cable and USB Software Key * Notes: Top of the range, two-connector ECU. Ideal for popular late model performance and racing applications.

Not Yet Reviewed

$2,409.00

Haltech Nexus R3 VCUs

Haltech's Nexus R3 ECU combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit). Product features: * 4 x 25 amp (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull / H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds, and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Offers an excellent solution for your engine management needs * Applications: Universal * What's in the box: (1) Nexus R3 VCU

Not Yet Reviewed

$2,399.00

Edelbrock Pro-Flo 4 Plus Self-Learning Engine Management Systems

Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design

4.0 out of 5 stars ( 1 )

$2,379.95

—

$2,505.95

Aeromotive 5.0 GPM Brushless Spur Gear Pump Fuel Cells

Aeromotive 5.0 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated 100-micron pre-filter. Order the Aeromotive 5.0 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Triple male wire threaded stud terminals * Not compatible with pulse modulated systems or fuel pump speed controllers

4.0 out of 5 stars ( 2 )

$3,116.49

—

$3,209.28

61 Results Found For "terminal"