Availability
On Sale
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$3,604.99
$2,039.99
—
$3,064.24
Increase your driving confidence and towing safety with the superior retarding performance of BD Diesel exhaust brakes. Using BD's exclusive Variable Orifice Technology, the turbo-mount design bolts in place of the factory elbow between the turbo and the exhaust system. This provides peak retarding power throughout the engine's rpm range—not just at high rpm like other brands. The remote-mount models, meanwhile, attach in the exhaust pipe and are perfect for modified applications. Some kits include an air compressor. Order the universal or vehicle-specific brakes best suited for your rig.
Not Yet Reviewed
$2,105.00
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 44 )
$2,999.99
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$2,349.95
—
$2,549.95
$2,113.95
—
$2,293.95
Edelbrock Pro-Flo 4 EFI systems provide you with a high performance traditional-style intake and 4150-style throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor (not included with LS kits) * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2-bar MAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 125 )
$2,266.95
—
$3,239.95
On Sale
Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included
( 3 )
$2,249.95
$2,023.95
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,559.95
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
On Sale
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,499.95
$2,248.95
On Sale
Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,149.95
Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 21 )
$2,645.95
—
$2,986.95
On Sale
Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$2,599.95
—
$3,199.95
$2,338.95
—
$2,878.95
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$2,249.95
—
$2,499.95
On Sale
Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)
Not Yet Reviewed
$2,917.70
$2,625.93
On Sale
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$3,707.88
—
$5,671.00
$3,522.49
—
$5,387.45
With all the most important content from the original Magnum, Tremec Magnum XL 6-speed transmissions retain brute strength and sophistication, but eliminate multiple shifter locations and dual speedo outputs. Each XL extended length tail section provides a rigid direct-mount shifter designed to eliminate the semi-remote shifter found in many popular late-model applications, delivering vastly improved performance and lightning quick shifts. Tremec Magnum XL transmissions not only offer shift performance and extended length, but they are also rated at 700 lb.-ft. of torque, support 7,800 rpm shifts, and are available in two gear ratio configurations. The Magnum XL was designed specifically to replace the OEM 5- or 6-speed transmission where performance improvements are desired. Simplifying the swap, they include an SFI-approved steel bellhousing, crossmember, trans mount, isolated shifter, and shift ball. They also reuse the OEM hydraulic clutch release system. Select the ideal gear ratio for your build. Features: * Extended- length (XL) extension housing * Shifter location that mimics several late-model applications * Reverse inhibitor solenoid * Electronic speedometer output * Fluid fill and drain ports * Common "T-56" style bolt pattern * Mounted pad for OEM-style hydraulic slave or aftermarket guide tube * Standard Magnum clutch fork exit window * Unique isolator-style shifter for reduced noise, vibration, and harshness (NVH) * Reverse light switch
Not Yet Reviewed
$3,695.00
When it comes to getting everything you need to complete your air suspension system, sometimes getting everything you need in a comprehensive package is the best route to take. At AccuAir, they do the heavy lifting for you and offer everything you could ever want for your air ride system with their Air Suspension Ultimate Packages. AccuAir Suspension Ultimate on-board air compressor systems include an ENDO-VT air tank and an e+ Connect, which includes an ECU+, wireless switch box, an e-Level+ app, height sensors, and TouchPad+, making them the perfect top-of-the-line kits for anyone looking to get the best components for their air suspension management. Features and contents: * ENDO Valve-Tank, 4-corner, 5 gallon weld-free, leak-free, bolted aluminum construction with raw finish, precision machined aluminum components, and valves integrated into the air tank allowing for quicker installs and an overall cleaner presentation in your trunk, truck bed, or anywhere else you choose to mount your tank * e+ Connect allows wireless control over your air suspension system through the e-level+ app * e+ Height upgrades e+ Connect to e-Level+ with the addition of preset heights via included height sensors, harnesses, and hardware * e+ TouchPad: Connects to e+ECU for a hardwired interface, allows easy control of your suspension from the palm of your hand, magnetic mount TouchPad has an integrated compressor status indicator which is an LED indication of the status of your compressor(s) * Long-range Bluetooth 5.0 * 3/8 in. DOT/PTC fitting kit: -- 50 ft. 3/8 in. DOT nylon air line -- Black moisture trap/filter -- Fittings -- Loctite 565 anaerobic thread sealant * VIAIR 485C dual air compressors * Compressor power kit
Not Yet Reviewed
$3,499.95
Designed with strong worm-gear drives, Ramsey RE Series winches are ideal for large trucks and SUVs that require heavy-duty pulling power. These winches include the exclusive Ram-Lok clutch to provide easy line removal and positive engagement, a 12 ft. remote-control switch for safe operation, weather-shielded solenoids, and color-coded battery cables for a quick installation.
( 2 )
$2,058.99
—
$2,508.99
Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,044.00
Baileigh Industrial BS-210M horizontal band saws will quickly become one of your favorite tools. You can control the descent in two ways: manually (with a trigger switch) or with a hydraulic descent feature--usually seen only on more expensive models. With a good mix of features at an economical price, these saws are ideal for small-to-medium machine shops or your garage.
Not Yet Reviewed
$4,135.00
QA1 lowering kits achieve the ideal lowered look for your truck. Available for 2WD and 4WD models, each kit features QA1's front Pro Coil coilovers and Rear Drop Kit, which provide adjustability to achieve the perfect stance, while providing significant improvements to ride quality and performance. For an all-in-one solution to upgrade the suspension of your truck, choose the QA1 lowering kit designed for your vehicle. Features: * Easy bolt-in installation * Adjustable ride comfort and handling ability -- QA1 Proma Star single and double adjustable shocks deliver exceptional ride quality and performance with the simple turn of a dial, allowing you to effortlessly switch between a comfortable cruise and a more aggressive feel for daily driving or twisty backroads * Adjustable front and rear ride height -- Fully threaded front coilover shock bodies provide adjustment without the use of clumsy shims or spacers, while the rear drop kits offer 2 in. of adjustment to dial in the final rake of the truck. * Heavy-duty shock design -- Upgraded shock with polyurethane bushings (specifically chosen to withstand the daily use of trucks) and a 1 in. chromoly T-bar. * Lifetime warranty -- Lifetime coverage of the QA1 shocks * Rear flip kit, shackle and hanger kits -- Lower the rear of your truck without compromising ride quality -- Heavy-gauge steel construction, powdercoated finish, and top-notch hardware guarantee long-lasting performance in any driving conditions
( 1 )
$2,045.95
—
$2,953.95
KC HiLiTES is raising the bar to give you off-road lighting at its best! Gravity LED Pro6 light bars' unique adjustable linking system features expandable widths, a modular beam shape, and a radius or straight setting between each ring. Customize them to suit your light pattern options. Their G6 LED optics are high output and low amperage draw, and the Infinity Ring housings give you a durable, unique look. They feature high-strength aluminum end mounts and hardware in vehicle-specific kits, and a deluxe plug-and-play wiring harness with 30 amp switch. Select the KC model with the number of LED lights needed for your application.
( 1 )
$2,059.99
—
$2,399.99
H&S Autoshot plasma cutters provide the power to genuine and sever cut steel. Available in two models, they feature adjustable output, air purge switch, and adjustable air regulator/dryer with gauge. These professional inverter plasma cutters may include: * Inverter power supply * HSP40 or HSP60 plasma torch (12 ft.) * 200-amp earth clamp * 115 V adaptor plug (40-amp model only) * Spare tips and electrodes * Operator manual
Not Yet Reviewed
$2,507.99
On Sale
EMAX offers industrial 250 Series vertical piston compressors in a variety of capacities and power levels: * Model EMX-ESL05V060V1: The EMAX 250 Series 5 hp 60 gal. 1-stage 2-cylinder, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 19 cfm at 100 psi. It also features an industrial grade 1.1 Service Factor 1740 rpm electric motor, Condor Pressure Switch, manual drain valve, 60 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet. EMAX air compressors are built and tested in Ohio with reliability and durability in mind. * Model EMX-ESL07V080Y1: The EMAX 250 Series 7.5 hp 80 gal. 2-stage 3-cylinder, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 26 cfm at 100 psi. It also features industrial grade 1,750 rpm electric motor, magnetic starter, manual drain valve, 80 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet. * Model EMX-ESL10V080V1: The EMAX 250 Series 10 hp 80 gal. 2-stage V4, single phase air compressor is designed for up to 50,000 hours of use with proper maintenance. This EMAX air compressor is equipped with an all-cast iron splash lubricated pump producing 38 cfm at 100 psi. It also features an industrial grade 1.1 Service Factor 1,740 rpm electric motor, magnetic starter, manual drain valve, 80 gal. powdercoated ASME tank with 1/4 in. mounting pads, OSHA-approved 13 G steel belt guard, and 3/4 in. air outlet.
Not Yet Reviewed
$2,435.88
—
$3,707.88
$2,314.09
—
$3,522.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
