Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
192 Results Found For "support"
Showing In Stock Items. Show All 314 Items.
Not Showing Customizable Items. View Customizable Items.
Cold Case Radiator Support Module Kits
Cold Case offers radiator support module kits for a variety of applications, including 1960s era Camaro LS engine swaps. Each module comes fully assembled and ready to bolt into your vehicle. They consist of an aluminum radiator support, big 1.25 in. tube dual-core crossflow radiator, two 3600 cfm fans/shroud combination, billet cap, and billet overflow tank. These units are very popular with high-tech, high horsepower builds in which maximum cooling is a must. Available in either standard Chevrolet outlet configurations or LS outlet configurations, they're 100 percent TIG-welded and ready to paint or polish. Radiator support module features: * Extra forward design will clear big block and LS front drives * Brushed aluminum finish * 2 row design with 1.25" tubes * Includes dual 14 in. 3600 cfm fans and shroud combination setup * Easy to install even in finished cars * Optional AC condenser and electronic fan controller upgrades available
( 5 )
$2,289.54
—
$2,671.54
On Sale
Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$2,399.95
—
$2,609.95
$2,158.95
—
$2,347.95
Tremec TKX Manual Transmissions
Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance
( 47 )
$2,895.00
Ford Performance Parts 5.2L Gen 3 Coyote Aluminum Engine Blocks
Ford Performance Parts 5.2L Gen 3 Coyote aluminum engine blocks are upgraded versions of the Gen 1 and Gen 2 blocks (M-6010-M52 and M-6010-M52A). They feature higher flow oil squirters to provide added piston cooling and improved crankcase windage. All features are finish-machined, including head deck and crank bore. Get revved up for the improved high performance casting of Ford Performance 5.2L Gen 3 Coyote aluminum engine blocks and their ability to support higher horsepower engine builds! Features, items, and specs: * 94.0mm bore * Rod bolt path is clearance-machined in crankcase of block * Utilizes longer (187mm) cylinder headbolts to provide greater clamping force (requires longer headbolt kit: M-6067-M501280 or M-6067-M52B head changing kit) * Water jacket below cylinder bore updated to add more material for strength * Intake side of bore at deck surface includes cast-in brace (improves strength of cylinder wall and head gasket sealing) * Block features plasma-transferred wire arc spray weld liner coating (improved durability and heat transfer, reduced friction, and weight savings compared to previous Mustang GT aluminum blocks) * Cylinder liner coating doesn't require unique piston rings or piston material * Cylinder bores finish-honed and ready to assemble * Cross-bolted nodular iron main bearing caps—uses 12mm cylinder head bolts * Block has provisions for piston oil squirters (included) * Plugs and dowels
( 1 )
$2,494.99
McGaughy's Black SS Suspension Lift Kits
"Now, that's a truck!" McGaughy's Black SS suspension lift kits give your rig a "real" lift. The kits are available for 6 to 10 in. of lift to boost your truck's stance and your ego. The elite adjustability is possible with the included front struts and because McGaughy's drops the crossmember and differential a full 7 in. This keeps your CV axles' angles, suspension geometry, and steering geometry at factory specifications. To keep these performance lifts looking good, they receive a durable, glossy black powdercoated finish. Plus, the front crossmember is accented with highly polished stainless steel inlays. Install one of McGaughy's SS lift kits, and the next time you hear, "Whoa, what a truck!" it will be referring to yours! McGaughy's SS suspension lift kits may include: * Lift spindles * Adjustable front struts or extenders * Crossmembers * Lower A-arm support rods * Tie rods * Sway bar drops and extenders * Skid plate * Fabricated lift blocks * Bump stop extenders * Brake line extenders * Rear shocks or extenders * U-bolts and necessary hardware
( 2 )
$2,998.15
—
$3,492.06
On Sale
Holley EFI Digital Pro Dash Standalone Kits
Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included
( 3 )
$2,299.95
$2,068.95
Van Steel Complete Trailing Arm Assemblies
Van Steel complete trailing arm assemblies are available with factory-style T-arms (no sway bar holes) or offset T-arms with spherical bearings. Additional contents include these new components: * Rotors * Spindles * Caliper mounting brackets * Bearing supports * Backing plates * Stainless steel parking brake hardware * Parking brake shoes * Bearings, seals, and races
( 3 )
$2,229.99
—
$2,299.99
Ford Performance Parts Boss 302 Engine Blocks
The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.
( 3 )
$2,265.99
Fleece Performance Cheetah FMW Turbochargers
Amplify your driving experience with a Fleece Performance Cheetah turbocharger. Featuring a Fleece exclusive 63mm FMW compressor wheel and a high-flow turbine wheel, these turbos are capable of supporting up to 650 rear wheel horsepower without sacrificing any drivability. These drop-in replacements offer smooth and quick throttle response with big top-end power. Whether you're towing, racing, sled pulling, or just driving to work, the Cheetah will get the job done. Order the model recommended for your truck.
( 2 )
$2,699.00
—
$3,099.00
McGaughy's Suspension Lift Kits
Give your rig a lift—via McGaughy's suspension lift kits! Their key components feature a brilliant gloss metallic silver powdercoat for longevity and durability. Installation is easy with minimal drilling; no re-routing of the exhaust, or cutting or grinding on the front or rear differential is necessary. This equipment is CNC-formed, machined, and laser-cut in-house from the highest grade materials. The spindles are CAD-designed for a perfect and accurate fit. Complete kits include the lower A-frame support rods, along with compression struts to add extra support and prevent the front and rear crossmembers from flexing. Dozens of kits are available for vehicles from the 1990s and up. Choose the style, lifted height, and other options recommended for your application; then elevate your rig to a higher stance with McGaughy's suspension lifts.
( 10 )
$2,445.00
—
$4,288.33
On Sale
Holley Terminator X Stealth 4150 EFI Fuel Injection Systems
Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!
( 9 )
$2,509.95
$2,257.95
On Sale
Holley Terminator X Max Stealth 4150 EFI Fuel Injection Systems
Holley Terminator X Max Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Max Stealth 4150 systems provide transmission control for later model GM 4L60E and 4L80E transmissions.
( 4 )
$2,399.95
—
$2,819.95
$2,158.95
—
$2,536.95
On Sale
Holley Terminator X Stealth 4500 EFI Fuel Injection Systems
Holley Terminator X Stealth 4500 EFI systems feature eight 100 lb. fuel injectors capable of supporting up to 1,500 hp naturally aspirated or 1,250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control—improving idle stability, drivability, and wide-open throttle horsepower! They are designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, enabling you to easily convert your 4500 equipped 800+ horsepower dragster or door car. Choose from a black or polished aluminum body.
Not Yet Reviewed
$2,919.95
$2,626.95
On Sale
Holley Terminator X Stealth 4150 2X4 EFI Fuel Injection Systems
Holley Terminator X Stealth 4150 2x4 EFI systems feature eight 100 lb./hr. fuel injectors capable of supporting up to 1500 hp naturally aspirated or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Features: * Bolt-on 2x4 4150 flange carburetor replacement * Internal 1bar MAP sensor, built into the Terminator X ECU External fuel pressure regulator required, set to a base pressure of 58.5 psi * Integrated ignition timing control * High-resolution, full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--answer a few questions about your engine, and it creates the base map, then starts tuning on its own without the use of a laptop * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and Fuel Pressure regulator, for years of dependable service * Weld-in oxygen sensor bung for the exhaust ensures a leak-free oxygen sensor install * Plug-and-play with Holley EFI accessories * Available in three finishes: Shiny, Black, and Gold
( 2 )
$3,149.95
$2,833.95
Fleece Performance Cheetah Holset VGT Turbochargers
Fleece Performance Cheetah Holset VGT turbochargers will lower EGT's, supply top-end power, and provide quick and tight throttle response. They don't require an installation kit; however aftermarket off-road tuning and free-flowing exhaust are required. These drop-in replacement turbochargers have 63mm billet compressor wheels, a high-flow turbine wheel, and can support 650 rwhp. They provide spooling similar to stock and an operating range of 40 to 45 psi. When on the prowl, having fun, working for your meal, or racing others, enjoy the spirit of your turbo's namesake—Fleece Performance Cheetah Holset VGT turbochargers.
( 2 )
$3,099.00
Reid Racing Super Hydra 400 Transmission Cases
Redesigned and strengthened, Reid Racing Super Hydra 400 transmission cases address weaknesses and add features that improve every aspect of the Turbo 400. They build their Super Hydra 400 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission! A direct replacement for the GM case, Reid cases use an incredibly expensive permanent mold casting technique to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. Super Hydra 400s are massively tough, ductile, and leak-free—with the strength to handle rock crawling, as well as desert or short-course truck racing. Their modular, 2-piece design allows them to be used with all popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super Hydra 400 transmission cases are offered in drag/street and off-road versions, each with features geared specifically for those applications. Features: * Speedometer and governor provisions * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Additional dipstick hole on driver side * Multiple external pressure taps allow for monitoring of circuit pressures * Accept all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers Off-road also includes: * Pre-machined side oil feed feature for 4L80-E center support * Front band anchor tapped for custom ARP anchor bolt (supplied) * Pre-machined bosses for input and output speed sensors * Un-machined speedometer boss for maximized 4x4 transfer case load support * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters * Available with a 4L80-E size pressure plate
( 4 )
$2,148.99
—
$2,282.99
Ford Performance Parts Gen 3 Predator Cylinder Heads
Ford Performance Parts Gen 3 Predator cylinder heads are improved high-performance castings, providing added strength and increased size of the central cooling passages to support higher horsepower engine builds. Features: * Fully CNC ported intake ports, exhaust ports and combustion chamber * Larger port sizing than the 2015-17 5.0L Coyote cylinder heads * 38.3mm intake valve and 32.5mm exhaust valve * New valvetrain geometry allows for higher valve lift * Lightweight hollow-stem intake valves and sodium-filled exhaust valves * Stiffer exhaust valve springs * Upgraded valve guides * Upgraded exhaust valve seat * Loaded head assembly minus camshafts, rocker arms, and lash adjusters
Not Yet Reviewed
$2,189.99
FiTech Go EFI 3x2 Tri Power 600 HP Fuel Injection Systems
FiTech Go EFI 3x2 Tri Power 600 hp fuel injection systems with external ECU sticks to basic functions that deliver the best possible performance and economy for your street and mild performance engine. These FiTech ready-to-run throttle body systems allow you to remove your carburetor and advance into the EFI world at an affordable price. The Tri-Power 600 hp systems come complete with a classic gold diecast aluminum throttle body, hand-held controller, windshield mount, wideband oxygen sensor, coolant temperature sensor, and a compact external ECU. Systems are available with or without FiTech's Go-Spark CD ignition. Features: * Annular discharge * Supports up to 600 hp engines * Three high-flow throttle bodies, each with two 45mm throttle bores * Clearly marked OE-style harness * All sensors are integrated on the unit (except for wideband oxygen and coolant temperature sensors) * Fits intake manifolds with three 2-barrel flanges * Works with OE carb-type distributor and throttle linkage * Compatible with E-85 gasoline * Fuel pump voltage control * Wet Flow Technology with swirl spray annular discharge design * Optimize Air Fuel Ratios while driving
( 4 )
$2,410.00
—
$2,499.99
On Sale
Holley Sniper EFI Stealth 4500 Fuel Injection Systems
Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,199.95
March Performance Revolver Serpentine Conversion Kits
March Performance revolver serpentine conversion kits feature a solid one-piece bracket that provides rigid support for the alternator and power steering. A separate, low-mount driver side bracket allows for the option of power steering or no power steering. The March Performance revolver serpentine conversion kits feature a unique, easy-to-use belt tension adjustment tool. Once the belt tension has been set, the adjustment tool is easily removed and stowed away until the next time that the belt requires adjustment. As a result, these kits display a much cleaner appearance.
( 10 )
$2,002.99
—
$2,672.99
Reid Racing Super 80 Transmission Cases
Redesigned and strengthened, Reid Racing Super 80 transmission cases address weaknesses and add features that improve every aspect of the 4L80e. They build the Super 80 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission. Reid Super 80 cases are massively tough, ductile, and leak-free with the strength to handle turbocharged muscle cars, drag cars, rock crawling, and desert truck racing. Their modular, 2-piece design allows them to be used with popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super 80 transmission cases are SFI 4.1 certified without requiring any external shields. Features: * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Multiple external pressure taps allow for monitoring of circuit pressures * Heli-coiled bellhousing and oil pump threads * Front band anchor tapped for custom ARP anchor bolt (supplied) * Input and output speed sensors--bosses are dual machined to accept freeze plugs * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters
( 2 )
$2,318.00
Holley Terminator X Max GM Gen V LT Direct Injection Kits
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,149.95
—
$3,649.95
Aeromotive 7.0 GPM Brushless Variable Speed Gear Pumps
Aeromotive 7.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum fwhp by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 4,800 fwhp on gas--naturally aspirated -- Up to 3,400 fwhp on gas--forced air induction -- Up to 3,360 fwhp on E85--naturally aspirated -- Up to 2,380 fwhp on E85--forced air induction -- Up to 1,680 fwhp on methanol--naturally aspirated -- Up to 1,190 fwhp on methanol--forced air induction * Carbureted -- Up to 5,400 fwhp on gas--naturally aspirated -- Up to 3,800 fwhp on gas--forced air induction -- Up to 3,780 fwhp on E85--naturally aspirated -- Up to 2,400 fwhp on E85--forced air induction -- Up to 1,890 fwhp on methanol--naturally aspirated -- Up to 1,200 fwhp on methanol--forced air induction
( 1 )
$2,401.61
—
$2,527.88
American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,559.95
