Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
168 Results Found For "rocker"
Jesel Pro Series Shaft Rocker Arms
Rely on Jesel Pro Aluminum Series shaft rocker arms to move you into the winner's circle. Their custom blended 7000 Series aluminum alloy allows for an extremely durable and lightweight valvetrain assembly with a tensile strength at 300 degrees to far exceed that of less expense, industry-standard 2024 alloys. Jesel Pro Series rocker arms have profiled rocker tails and clipped-pin nose rollers, and they are shot-peened for increased resistance to fatigue failures. They are offered in standard slot, Mohawk beam, and solid body styles, as well as different ratios individually and in sets. Features of Jesel Pro Aluminum shaft-mounted rockers: * Longer rocker arms provide higher rocker ratios * Proper travel arc geometry * Enough rocker-to-valve spring clearance to run big race springs * CNC-machined aluminum rockers are extra rigid to insure true rocker ratio * Shaft mounting reduces reciprocating mass for high rpm use * Easier access to valve springs, lash caps, retainers and locks * Longer valve spring life
Not Yet Reviewed
$2,075.00
—
$2,390.00
COMP Cams Shaft Mount Aluminum Rocker Arms
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$2,049.95
—
$3,021.95
Brodix Cylinder Heads T&D Shaft Rocker Arms
Unlike stud mounted rocker arms, Brodix T&D shaft rockers are mounted on a rigid steel shaft that resists deflection. The shaft is anchored to a machined steel stand, becoming an integral part of the cylinder head structure. Brodix T&D shaft rocker arms resist side loads and maintain optimum valvetrain geometry. They are designed with computer-aided processes and are CNC-machined to ensure a precision fit for all applications. Available in different ratios for specific cylinder heads, Brodix T&D shaft rocker arms are the perfect choice for your high performance engine.
Not Yet Reviewed
$2,750.99
—
$3,908.99
Crower Stainless Steel Shaft Mounted Rocker Arm Systems
For those of you that feel most confident running a steel-based valve train, look no further than the collection of Crower stainless steel shaft-mounted rocker arm systems. Every configuration has been rigorously scrutinized to offer extreme rigidity and accuracy while optimizing the moment of inertia phenomena condition. Crower engineers made ease of installation and maintenance a top priority--so you'll never waste a moment when time is critical at the track. These stainless steel shaft rocker systems are a perennial favorite of dirt late models and marine endurance competitors. Sustained high temperatures have little effect on the strength properties of stainless steel so components made from this material typically have a longer life expectancy than similar components made from aluminum. All Crower shaft mount rocker arms are available with Crower's needle bearing roller tip option. They greatly reduce friction for added horsepower and decreased valve guide and valve stem wear. The lighter tips deliver greater valve control for increased rpm and improve valve spring longevity by decreasing heat compared to traditional non-needle designs.
( 2 )
$2,375.99
—
$3,285.99
Trick Flow® Twisted Wedge® 11R Top-End Engine Kits for Small Block Ford
Tuned by Trick Flow® engineers to deliver optimum horsepower and torque on a small block Ford, these kits will save you cash and take the guesswork out of building a winning engine combination. The Trick Flow® Twisted Wedge® 11R top-end engine kits are built around a set of dyno-proven Twisted Wedge® 11R 170 cylinder heads (TFS-52515301-C00). Also included is a Track Max® hydraulic roller camshaft (TFS-51403001), 1.6 ratio roller rocker arms (TFS-51400520), true roller timing chain set (TFS-51478520), chromoly pushrod set (TFS-21407050), cylinder head bolt kit (TFS-92005), and a complete engine gasket set (TFS-51400904). The test engine with these parts installed made 432 horsepower and 370 lbs.-ft. of torque on Trick Flow's® engine dyno!
( 5 )
$3,821.99
Ford Performance Parts Gen 3 Predator Cylinder Heads
Ford Performance Parts Gen 3 Predator cylinder heads are improved high-performance castings, providing added strength and increased size of the central cooling passages to support higher horsepower engine builds. Features: * Fully CNC ported intake ports, exhaust ports and combustion chamber * Larger port sizing than the 2015-17 5.0L Coyote cylinder heads * 38.3mm intake valve and 32.5mm exhaust valve * New valvetrain geometry allows for higher valve lift * Lightweight hollow-stem intake valves and sodium-filled exhaust valves * Stiffer exhaust valve springs * Upgraded valve guides * Upgraded exhaust valve seat * Loaded head assembly minus camshafts, rocker arms, and lash adjusters
Not Yet Reviewed
$2,189.99
Trick Flow® 360 HP Twisted Wedge® Top-End Engine Kits for Ford 5.0L
Trick Flow® 360 HP Twisted Wedge® Top-End Engine Kits for Ford 5.0L provide dyno-proven power without the guesswork. Built around Trick Flow® Twisted Wedge® Street cylinder heads, the kits include a specially matched hydraulic roller cam, Track Heat® EFI intake manifold, roller rockers, gasket kit, billet timing chain, pushrods, short valve covers, and our billet oil fill kit. Lifters not included.
( 4 )
$4,101.99
Summit Racing™ Chevy LS 5.3L 450HP Long Block Crate Engines
Looking for big LS engine power at an affordable price? Summit Racing™ remanufactured 5.3L LS long block crate engines are rated at 450 HP and 420 lbs.-ft. torque! This engine will give you the performance and drivability you have been searching for at a price you can afford. It can be a performance upgrade for 99-07 Chevy trucks, or an engine swap into your project vehicle. You will save time and money by leaving the machine-work and assembly to us. Just bolt on your accessories and drop it in. These engines are machined and assembled for us by the guys at ATK, and backed with a 2-year unlimited mile warranty for peace of mind. Technical specifications: * Horsepower: 450+ * Torque: 420+ * Block: Seasoned OE LM7/5.3L iron * Bore/stroke: 3.800-3.820 in. x 3.622 in. * Year range: 1999-2007 * Displacement: 323 C.I.D. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24-tooth reluctor wheel * Connecting Rods: OE GM forged powder metal 6.093 in. * Pistons: Hypereutectic flat top * Piston rings: Moly * Compression ratio: 10:1 compression * Camshaft: Summit Racing Pro LS Roller * Camshaft specifications: Lift- 550/550, Duration @.050- 222/232 * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: #799 or #243 OE aluminum 64cc 2.00 in./1.55 in. valves * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed
( 47 )
$3,849.99
ATK High Performance GM 350 Vortec 290 HP Stage 3 Long Block Crate Engines
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 9 )
$3,625.99
ATK High Performance GM 350 345 HP Stage 1 Long Block Crate Engines
ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 1 long block crate engines are classics with great street manners, and vacuum to power all your accessories. These Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 350 345 hp base long block engines consist of: * Seasoned OE short block with 4-bolt mains * OE cast crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly piston rings * Hydraulic roller camshaft * 220/224 at .050 in. * .495 in./502 in. lift 110 LSA * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * Valve covers * Timing set and cover * Oil pan, high volume oil pump with pick-up tube
( 13 )
$3,198.99
ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 9 )
$3,688.99
ATK High Performance Ford 302 Stock Drop-In Long Block Crate Engines
Classic Ford 302 stock drop-in long block crate engines from ATK High Performance are shipped to you fully dressed. These are basic stock engines with moderate horsepower and torque based off the 80-86 Ford 302 engine. These engines typically make about 240 horsepower on the dynamometer. Additional specs: * Block: seasoned OE roller block * Bore/Stroke: up to 4.060 x 3.000 * Displacement: 302 c.i.d. * Crankshaft: OE Ford cast late model crankshaft (50 oz. imbalance) * OE steel connecting rods 5.4 in. stock bolts * Pistons: hypereutectic * Piston rings: moly rings * Compression Ratio: 8.5:1 * Camshaft: hydraulic flat tappet * Camshaft specifications: OE stock * Camshaft bearings installed and blocked to OEM position * Cylinder heads: OE cast iron * Freeze plugs: brass installed and sealed * Rocker arms: stamped steel 1.5 ratio * Oil galley plugs: installed and sealed * Oil pan: OE 5 qt. front sump * Weight: 430 lbs. * For engine break-in please follow the ATK break-in procedure that is included with the engine.
( 32 )
$3,998.99
ATK High Performance GM 350 330 HP Stage 1 Long Block Crate Engines
Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube
( 16 )
$3,099.99
AFR 185cc SBF Renegade 20 Degree Street Heads
When you want the world's finest high-performance, street/strip, small block Ford heads, then check out AFR 185cc emissions-legal Renegade Street cylinder heads. With lightweight 8mm, 2.020 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 or 72cc, and 68cc exhaust ports, these cylinder heads are designed for 302-393 c.i.d. engines operating up to 6,500 rpm. The 3/4 in. thick head deck makes them ideal for nitrous or blower applications. These heads will not accept rail rocker arms or OEM pistons, and hardened pushrods are required on models designed for stud mount rocker arms. Get fully CNC-ported and competition-5-angle valve job performance for your SBF engine with an assist from the AFR 185cc SBF Renegade 20 Degree Street Heads best suited for your build!
( 37 )
$2,126.00
AFR 265cc Oval Port Magnum BBC Cylinder Heads
AFR 265cc Oval Port Magnum BBC cylinder heads are designed to be used on engine displacement up to 468 cu. in. operating at or below 6,200 rpm—providing tons of bottom-end torque, tremendous throttle response, and great all-around power. Recommended for street, strip, or towing applications, these torque monsters can flow 354 cfm at 0.650 in. lift. These units feature a 3/4 in. thick deck, along with reinforced rocker stud bosses, and thick, rugged castings. Want high-flowing power? Then choose these 265cc Oval Port Magnum BBC cylinder heads from AFR. Additional features include: * Intake runners and exhaust ports are partially CNC-machined * Competition 5-angle valve job * 3/8 in. guideplates * A356 aluminum material
( 9 )
$2,270.00
—
$2,936.00
AFR 165cc SBF Renegade 20 Degree Street Heads
For the ultimate small block Ford street car, consider AFR 165cc SBF Renegade 20 degree street heads. Unlike some aftermarket heads, AFR's Ford cylinder heads (CARB E.O. # D250-3) fit all of your stock components; no special parts are required! With lightweight 8mm, 1.900 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 and 60cc, and 68cc exhaust ports, these emissions-legal aluminum cylinder heads are perfect for 289 and 302 engines operating from idle to 6,000 rpm. A 3/4 in. thick head deck makes the heads ideal for nitrous or blower applications. Renegade cylinder heads will not accept rail rocker arms, and hardened pushrods are required on models designed for stud mount rocker arms.
( 28 )
$2,126.00
ATK High Performance GM 383 Stroker 415 HP Stage 1 Long Block Crate Engines
Give your ride the extra twist only a stroker can deliver with ATK High-Performance GM 383 Stroker 415 hp Stage 1 long block crate engines. These engines feature quality components and professional assembly to give your car or truck the kick it needs. They produce up to 460 ft.-lbs. of torque—that's enough to get you rolling in a cloud of tire smoke! ATK GM 383 Stroker 415 hp Stage 1 long block crate engine specs: * Seasoned OE 4-bolt main roller block * 4.040 x 3.750 bore/stroke * 383 c.i.d. displacement * Scat nodular iron crankshaft (3.750 in. stroke; one-piece; externally balanced rear/internal front) * Scat 4340 forged I-beam connecting rods (5.700 in.) with ARP bolts * Hypereutectic pistons * Moly piston rings with 9.7:1 compression ratio * Hydraulic roller camshaft with 220/224 duration at 0.050, 0.528 in./0.536 ex. lift, 112LSA * Installed camshaft bearings clocked to OEM position * ATK high-performance aluminum cylinder heads with 2.02/1.60 ex. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio rocker arms * 5 qt. OE oil pan * 350 lbs.
( 5 )
$4,498.99
ATK High Performance Chevy LM7 5.3L 385 HP Long BLock Crate Engines
With ATK High Performance Chevy LM7 5.3L 385 hp long block crate engines expect big mid to upper end power and a noticeable idle. They were designed to be performance upgrades for a 1999-2007 Chevy truck LM7 or an LS swap in a hot rod. Technical specifications include: * Horsepower: 385+ * Torque: 390+ * Block: GM 5.3L iron LM7 * Bore/stroke: Up to 3.809 x 3.622 * Year range: 1999-2007 * Displacement: 323 c.i.d. * Crankshaft: OEM GM 3.622 in. stroke internally balanced 24 tooth reluctor wheel .857 in. flange * Connecting rods: OE GM forged powder metal 6.093 in. stock bolts * Pistons: Hypereutectic dish * Piston rings: Moly rings * Compression ratio: 9.5:1 compression * Camshaft: Hydraulic roller * Camshaft specifications: Custom grind * Camshaft bearings: Installed and clocked to OEM position * Cylinder heads: OE aluminum 61.15cc 1.89/1.55 * Freeze plugs: Brass installed and sealed * Rocker arms: OE powdered metal 1.7 ratio * Oil Galley plugs: Installed and sealed * Weight: 385
( 15 )
$4,189.99
ATK Marine Rebuilt Long Block Engines
ATK Marine Engines offers premium-quality rebuilt long block engines specifically for boating applications. These engines are designed to deliver maximum performance and long-term durability for your boat. Order the model recommended for your marine application. ATK Marine rebuilt engines include: * Special marine pistons and rings * Special marine camshaft * Marine gaskets * New intake and exhaust valves * New main, rod, and cam bearings * New valve lifters, rocker nuts, and swivels * Heavy-duty double roller timing chains * Cam sprocket * Crank gear * Freeze plugs
( 45 )
$2,642.99
—
$4,405.99
AFR 260cc LS3 Mongoose Cylinder Heads
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 5 )
$2,751.00
—
$3,188.00
ATK High Performance Chrysler 360 Magnum 320 HP Stage 1 Long Block Crate Engines
ATK High Performance Chrysler 360 Magnum 320 hp Stage 1 long block crate engines are perfect for a street cruiser offering great street ability, stock idle, and good power. ATK Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK Chrysler 360 Magnum 320 hp base engines consist of: * Seasoned OE Magnum block * OE cast crankshaft * OE steel connecting rods * Hypereutectic pistons * Chromoly piston rings * Hydraulic roller camshaft * Magnum cylinder heads * Steel rocker arms * Timing set and cover * Oil pan, oil pump and pick-up tube * Valve covers
( 9 )
$3,298.99
ATK High Performance Ford 302 375 HP Stage 1 Long Block Crate Engines
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08, Front sump oil pan HP78 * Melling high volume oil pump * Double roller timing set Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Left Hand inlet reverse rotation water pump (HP08) * Right Hand inlet standard rotation water pump (HP78) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 2,400-2,800 Stall converter * 1,500-6,500 dual plane intake * 80 GPH Fuel pump * 91 plus octane fuel * 680 cfm carburetor
Not Yet Reviewed
$4,765.99
—
$4,790.99
ATK High Performance GM 383 Stroker 435 HP Stage 1 Long Block Crate Engines
Give your ride the extra twist only a stroker can deliver with ATK High-Performance GM 383 Stroker 435 hp Stage 1 long block crate engines. These engines feature quality components and professional assembly to give your car or truck the kick it needs. They produce up to 475 ft.-lbs. of torque—that's enough to get you rolling in a cloud of tire smoke! ATK GM 383 Stroker 435 hp Stage 1 long block crate engine specs: * Seasoned OE 4-bolt main roller block * 4.040 x 3.750 bore/stroke * 383 c.i.d. displacement * Scat nodular iron crankshaft (3.750 in. stroke; one-piece; externally balanced rear/internal front) * Scat 4340 forged I-beam connecting rods (5.700 in.) with ARP bolts * Forged flat-top pistons with two valve reliefs * Moly piston rings with 10.1:1 compression ratio * Hydraulic roller camshaft with 220/224 duration at 0.050, 0.528 in./0.536 ex. Lift, 112LSA * Installed camshaft bearings clocked to OEM position * Dart SHP aluminum cylinder heads with 72cc/180cc port volume and 2.02/1.60 in. valves * Installed and sealed brass freeze plugs (oil galley plugs also installed and sealed) * Billet aluminum 1.6 ratio full roller rocker arms * 5 qt. OE oil pan * 350 lbs.
Not Yet Reviewed
$4,998.99
AFR 195cc SBF Competition Cylinder Heads
AFR 195cc SBF competition cylinder heads feature 100 percent CNC-machined intake ports, exhaust ports, and combustion chambers. Manufactured in A356 aluminum and assembled with high-quality components, these AFR 195cc SBF competition heads are recommended for displacements up to 408 cu. in., and operating up to 6500-6800 rpm. They are not compatible with OEM pistons. They are available with or without EGR and air pump, as well as with either 58cc or 72cc chamber sizes. Components for these AFR cylinder heads include: * Competition 5-angle valve job * 8mm bead lock intake valve * 8mm bead lock exhaust valve * PAC racing spring 1.270 in. O.D. hydraulic roller dual valve spring; 155 lbs. on seat, .650 in. maximum lift, maximum rpm 7000 to 7200 * 7 degree chromoly retainers * 7 degree bead lock valve keepers * 7/16 in. rocker studs * Adjustable 5/16 in. guide plates * Viton® valve seals * Hardened valve spring I.D. locator * Ductile iron intake valve seats 2.131 in. O.D x 1.680 in. I.D x .375 in. deep * Ductile iron exhaust valve seats 1.650 in. O.D x 1.350 in. I.D x .375 in. deep * Bronze valve guides * Air injector reducer bushing
( 3 )
$2,691.00
