Free Shipping on Orders Over $109 at Summit Racing

Currie 9 in. Crate Rear End Assemblies

Currie 9 in. crate rear end assemblies offer a direct-fit, bolt-in solution for most common car, truck, and Jeep platforms. They feature larger spline axles, heavy-duty components, and internals from leading manufacturers. These axle assemblies are built to exacting standards matching factory specifications for suspension mounting points, pinion location, overall axle width, and wheel bolt pattern for hassle-free installation. Prior to shipping, skilled craftsman meticulously assemble essential parts to deliver years of trouble-free operation for your vehicle. They offer a broad range of gear ratios, performance differentials, or even a spool—if that's your thing. You'll be ready in no time for cruising, racing, off-roading, or just daily driving with Currie 9 in. crate rear end assemblies. Order the kit designed to fit your specific model.

3.4 out of 5 stars ( 5 )

$4,000.00

—

$4,700.00

PEM Racing MAX Option Low Drag Quick-Change Rear-End Assemblies

PEM Racing MAX Option low drag quick-change rear-end assemblies are designed to minimize drag and allow for quick gear changes, particularly in racing and hot rodding applications. By incorporating features like REM (Rotating Element Method) finished gears and bearings, black thermal coating, and drilled aluminum spools, these PEM Racing MAX Option low drag quick-change rear-end assemblies aim to reduce friction, heat, and rotating mass. For convenience, quick-change rear-ends utilize spur gears that can be easily swapped out or reversed to change the final drive ratio, enabling quick adjustments for different track conditions or driving styles.

Not Yet Reviewed

$2,930.99

Trail-Gear Trail-Link Four Rear Suspension Kits

Trail-Gear Trail-Link Four kits are the easy way to 4-link your rig. With these kits, the crossmember fits between frame rails and supplies frame mounts for all four links. The innovative TG design allows for a quick and easy installation. Trail-Gear Trail-Link Four kits offer choices of axle mounting for stock axle or Rock Assault housings, plus with or without long-travel air shocks that allow for more than 30 in. of rear axle articulation. TG Trail-Link Four kits include: * Heavy-duty 2 in. x .250 in. wall DOM links * Extra-large 1.25 in. creeper joints (4 right, 4 left) * Rod end jam nuts * Threaded link end bungs * Frame crossmember * Axle housing upper mount * 20 degree axle housing lower mounts (left and right) * Shock mounts with bolts and bushings * 9/16 in. x 4 in. link end bolts and locknuts

Not Yet Reviewed

$2,799.99

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 46 )

$2,895.00

AEV Conversions DualSport XP Suspension Kits for Jeep

AEV Conversions first introduced OE-level suspension engineering to the aftermarket over a decade ago. They continue to build on that legacy today, while also broadening their spectrum of suspension performance with the introduction of DualSport XP Suspension System for a variety of Jeep and RAM applications. The factory suspension on many vehicles is soft, lightly damped and with a low suspension frequency. This "soft tuning" can make the handling feel a bit loose and uncontrolled—not the ideal suspension formula for overland enthusiasts who also need to manage lots of cargo and gear when traveling off the grid. As with all AEV expedition-ready suspension systems, coil spring and shock tuning was essential to provide the optimal balance of load-carrying capacity and ride quality that customers have come to expect from AEV. The DualSport XP Suspension System includes a set of frequency-tuned, triple-rate coil springs to provide 2.5-3 in. of additional front and rear ride height. Customers can now fine tune their DualSport XP Suspension System even further by choosing one of two available coil spring options: * 2.5 in. Standard Load Coil Springs are optimized for a vehicle with typical gear/cargo inside. This means the ideal ride height, handling and overall performance will be achieved on a vehicle with steel bumpers, winch, full-size spare and recovery gear (+0-400 lbs. over factory weight). * 3 in. High-Capacity Coil Springs are specifically designed for overland enthusiasts who have a fully outfitted vehicle that is also consistently loaded with heavier gear (+400-700 lbs. over the standard load spring), such as modular cargo systems or roof rack/rooftop tent combinations. These coil springs are then paired with a set of AEV-tuned, Bilstein 8100 Series reservoir shocks for improved performance and consistency over rough terrain at higher speeds. The AEV/Bilstein coil spring and shock combination used in this suspension increases both up travel and down travel, while also providing better articulation and improved off-road speed potential and bottoming control. Even when towing, the suspension feels stable, planted, and confidence inspiring. AEV optimizes front and rear suspension geometry throughout the entire range of motion, tightening up the handling and road feel, resulting in a great ride and performance without introducing harshness or driver fatigue. In the front, a pair of AEV's heavy-duty, stamped control arm geometry correction brackets are included for improved ride quality and reduced nose-dive under hard braking. A rear track bar tower extension is included to raise the rear roll center, reduce body-roll and generate a better turn-in response. Extended-length front and rear sway bar end links compensate for the additional lift height, while new front and rear bump stop spacers improve bumper/axle contact under full articulation and jounce. Due to this suspension system's lower lift height, there is no need to swap out any of the OE track bars, control arms or steering components. Order the AEV Conversions DualSport XP suspension kit recommended for your vehicle!

Not Yet Reviewed

$3,266.74

—

$3,618.74

Summit Bucks

Vortech Carbureted Centrifugal Supercharger Kits

Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.

3.0 out of 5 stars ( 1 )

$4,449.99

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$2,495.99

VEGE Remanufactured Drive Axle Assemblies

VEGE Remanufactured drive axle assemblies enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured drive axles with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Unless otherwise noted, the assemblies include steel axle shafts, third member, ring and pinion, wheel studs, bearings, and seals. Includes fluid. Hundreds of models are available, for fitment on countless 4WD, AWD, and RWD applications.

2.8 out of 5 stars ( 5 )

$2,039.99

—

$2,354.99

8 Results Found For "rear end gears"