Free Shipping on Orders Over $109 at Summit Racing

FiTech Ultra Ram EFI 800 HP Fuel Injection Systems

FiTech Ultra Ram EFI systems deliver outstanding port fuel injection performance with an aggressive looking sheet metal intake manifold. The design of the Ultra Ram intake performs as good as it looks and will support up to 800 hp (naturally aspirated). FiTech Ultra Ram EFI 800 hp self-tuning fuel injection systems come ready to go out of the box with the injectors and fuel rails installed. The robust ECU is easy to mount and handles the air/fuel mixture targets with self-learning technology, so no laptop is required. In fact, you only need to input a few engine specs into the color touch screen monitor to get the engine to fire up. Ultra Ram systems are ideal for crate motors or your custom-built engine. Features: * Chevy Big Block rec port * Self-learning * Timing control ready * Matte black finish * Eight flow-matched injectors * Works with HEI large cap distributor Supplied with: * Sheet metal intake * Cast aluminum 102mm throttle body * Remote mount ECU * Main harness * Handheld controller * Cable and windshield mount * Wideband oxygen sensor * Bung kit * Coolant sensor * Gasket * Mini USB cable * Instructions and warranty information

1.0 out of 5 stars ( 2 )

$2,125.00

Holley Fuel Cell EFI Pump Module/VR Series Brushless Fuel Pump Assemblies

Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator

Not Yet Reviewed

$3,199.95

—

$3,299.95

Lingenfelter Performance Engineering Big Bore Direct Injection High Volume Fuel Pumps

Mechanical fuel pump flow has been one of the primary limiting factors for the aftermarket when trying to increase the power output of the GM direct injection V8 engines. Lingenfelter Big Bore direct injection fuel pumps for GM Gen V V8 applications provide an increase in fuel flow capacity over the stock LT1/L86 and LT4 fuel pumps, expanding the range of performance of these engines. At 12mm in bore size, the Lingenfelter Big Bore pump flows over 30 percent more than the stock L86 and LT1 pump—and nearly 10 percent more than the LT4 pump. With the combination of Lingenfelter GT35 camshaft with a 7.85 MM fuel pump lobe, the Big Bore pump flows 40 percent more than a stock LT4 pump and stock LT4 camshaft. The pumps are tested to provide over 1,400 hp (0.52 BSFC) of fuel flow for a turbocharged LT4 engine on VP Motorsports 109 fuel. Additional details: * Precision-machined and assembled fuel pump assembly using brand new production LT1 fuel pump cores * 12.0mm bore * DLC coated bore and piston * Compatible with production LT1 and LT4 fuel pump lobes and with aftermarket higher lift fuel pump lobes -- Note: some aftermarket higher lift fuel pump camshaft lobe designs may require a lash cap to compensate for the smaller camshaft base circle -- Note: some aftermarket higher lift fuel pump camshaft lobe designs may require a higher load spring on the pump to maintain fuel pump lifter control a revised spring on the pump * 100 percent hot tested pump assemblies to confirm performance and functionality * Individually serial numbered * Maximum recommended operating pressure of 15 MPa or 2175 psi * Requires consistent low side fuel pressure of 68 psi or greater Benefits: * Increased fuel flow allows higher power levels without having to resort to auxiliary fuel systems * Stock appearing * E85 compatible * Can be combined with higher lift fuel pump lobes for even greater flow rate increases

Not Yet Reviewed

$2,845.25

Aeromotive Eliminator Brushless Fuel Cells with Speed Controller

Aeromotive offers various Eliminator brushless fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy Eliminator performance with advanced technology when you order the Aeromotive Eliminator brushless fuel cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an Eliminator brushless fuel pump, and aircraft-style filler cap * All-aluminum construction * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional Eliminator models and uses a reduced current draw at higher EFI pressures * Outlet and return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 1,300 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 1,000 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire

Not Yet Reviewed

$2,499.15

—

$2,665.75

Aeromotive 5.0 GPM Brushless Spur Gear Pump Fuel Cells

Aeromotive 5.0 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated 100-micron pre-filter. Order the Aeromotive 5.0 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Triple male wire threaded stud terminals * Not compatible with pulse modulated systems or fuel pump speed controllers

4.0 out of 5 stars ( 2 )

$2,855.10

—

$3,100.75

Aeromotive Brushless A1000 Fuel Cells with Speed Controller

Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy Eliminator performance with advanced technology when you order the Aeromotive Brushless A1000 Fuel Cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an A1000 brushless fuel pump, and aircraft-style filler cap * All-aluminum construction and matches design used in Ford Cobra Jet, Chevy COPO Camaro, and many of the MOPAR Drag Pack cars * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional A1000 models and uses a reduced current draw at higher EFI pressures * Outlet ports are female ORB-10 * Return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 900 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 700 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire

Not Yet Reviewed

$2,264.15

—

$2,431.80

ATL Super Cell 100 Series Fuel Cells

ATL Super Cell 100 series fuel cells are super-light, super-tough, and super-safe! Weight and safety are always issues when building and maintaining your racer. ATL fuel cells resolve these issues. They start with 20-gauge steel cans (lighter weight aluminum is also available) and include a TF600 aluminum fill plate with a low-profile twist cap and rollover check valve. They feature crash-worthy, non-exploding, 3-layer bladders reinforced with ballistic nylon and filled with SF103 safety foam baffling. Things happen quickly in racing, so get prepared with ATL.

Not Yet Reviewed

$2,390.99

—

$3,389.99

ATL Bantam Fuel Cells

For maximum fuel, minimum weight, and the ultimate in safety, ATL Bantam fuel cells are the right choice! Aero Tec Laboratories' Bantam fuel cells are perfect for long distance races. These lightweight aluminum containers are equipped with ultra-light, super-thin, but strong ballistic KEVLAR® bladders for greater fuel capacity. Carrying the greatest amount of fuel with as little weight as possible is critical in racing especially long distance, but even more crucial is your safety. ATL excels in developing crash-worthy, non-exploding fuel cells. Bantam cells are outfitted with safety foam baffling for slosh and explosion suppression and fill plates with leak-tight caps and fittings. Aero Tec Bantam fuel cells help you perform your best and stay safe to race another day.

Not Yet Reviewed

$3,077.99

—

$4,005.99

Pyrotect PyroCell Touring Racing Cells

Pyrotect PyroCell Touring racing cells are top-of-the-line fuel cells. They're FIA/FT3 approved for all major racing sanctioning bodies. These units are especially designed for pump gasoline, racing gasoline, AVGAS, and gasohol (not for nitro or alcohol use). PyroCells are available in either a steel or aluminum container—in sizes ranging from 12 to 32 gallon capacity. Standard equipment includes: * Ultra-durable double-coated urethane fabric bladder * Full foam baffling * Single 3/8 in., 1/2 in. or 5/8 in. pick-up and one 1/2 in. vent check valve fitting * Internal fuel strainers * 3 1/2 in. threaded cap on a standard modular plate with billet rollover valve * Aircraft-style nut ring * Gasket * Standard fill plate with rollover check valve * 5-year bladder warranty (Optional equipment is sold separately—such as remote fillers, flush cap, 1 in. or 1 3/4 in. vent check valves, dual pick-ups in sizes 3/8, 1/2, or 5/8 inches, collector system, and sending unit.)

Not Yet Reviewed

$2,033.00

—

$2,458.00

Fuel Off-Road FF76D Gloss Black Dually Wheels with Milled Accents

Fuel Off-Road FF76D gloss black dually wheels with milled accents take on a different look and personality at every angle. Machined from 6061 T-6 aluminum alloy monoblock forgings, these Fuel F-Series wheels are offered in applications to outfit your behemoth perfectly—from stock to lifted, dually to trophy truck! The FF76D rims feature deep lip detailing with glossy black finish and unique beveled-edge spokes with milled accents for added visual appeal. Want a direct bolt-on wheel tailored to your specific vehicle without having to run adapters or spacers on your tow vehicle? Mount up Fuel Off-Road FF76D gloss black dually wheels with milled accents—and go!

Not Yet Reviewed

$2,109.00

Fuel Off-Road FF41D Gloss Black Dually Wheels with Milled Accents

Fuel Off-Road FF41D gloss black dually wheels take on a different look and personality at every angle with milled accents for a very sharp appearance. Machined from 6061 T-6 aluminum alloy monoblock forgings, these wheels are offered in applications to outfit your behemoth perfectly. The FF41D rims feature deep lip detailing with glossy black finish and unique beveled-edge windows for added visual appeal. Want a direct bolt-on wheel tailored to your specific vehicle without having to run adapters or spacers on your tow vehicle? Mount up some Fuel Off-Road FF41D dually wheels and go!

Not Yet Reviewed

$3,236.00

Summit Racing™ Turbocharger Hot Side Combo Kits

Summit Racing™ Turbocharger Hot Side combo kits provide premium components and accessories, carefully matched, to successfully reach your power and performance target. Each of our combos contain BTR multi-layer header gaskets, an ARP chromoly header bolt kit, and Precision Turbo and Engine turbocharger gaskets, along with a Summit Racing™ Pro LS turbo manifold and wastegate. Completing each combo will be one of our Summit performance turbochargers or a VS Racing turbocharger. Choose the combo best suited to your power needs. Contents and features: * BTR LS multi-layer steel gasket * ARP chromoly head bolts--12-point, rated at 170,000 psi to handle severe conditions * Precision Turbo and Engine turbocharger gaskets—stainless steel, provides a positive leak-free seal in high-temperature situations * Summit Pro LS turbo manifold—universal, 304 cast stainless steel, T4 flange, designed to handle the heat and horsepower * Summit wastegate--stainless steel base and 6061 aluminum cap with black anodized finish * VS Racing turbochargers with T4 housing * Summit 2600 or 2700 Series performance turbochargers--T4 turbine housings--true race turbos offering the latest in compressor aero technology with quick-spooling and free-flowing turbines specially designed, balanced, and precision assembled with 2618 billet forged compressor wheels for class leading racers.

4.5 out of 5 stars ( 2 )

$2,428.31

MSD Pro Mag 44 Magnetos

Serious racers choose MSD Pro Mag 44--the mother of magnetos. With no magnets to recharge or points to replace, and an amazing 44 amps of primary current, it's no surprise that these magnetos are the choice of nitro-gulping top fuel racers! Pro Mag 44 magnetos are built with an assemblage of rare earth magnets and windings to produce incredible energy. They accurately trigger and distribute this energy on a precision path to your spark plugs, creating a burst of ground-shaking energy in your cylinders. And, for the absolute ultimate in ignition triggering, the Pro Mag 44s' design allows you to add optional accessories--a crank trigger, timing retard control, or even a rev limiter! Forget those weak, inaccurate points and adjustments. Get the most powerful, accurate magnetos with durability to match their performance--the MSD Pro Mag 44 magnetos.

Not Yet Reviewed

$3,849.95

—

$4,304.95

World Products Motown Race Engine Blocks

World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.

4.0 out of 5 stars ( 1 )

$4,549.46

—

$4,736.26

Chevrolet Performance 454 C.I.D. Bare Engine Blocks

Direct from Chevrolet Performance are these 454 c.i.d. bare engine blocks. These are special Gen. VI bare iron blocks with 4.25 in. cylinder bores with 4-bolt main bearing caps. They have machined fuel pump pads, a one-piece rear main seal design, and standard 454 deck height. The maximum cylinder bore on these blocks is 4.25 in. plus .060 in. O.S., and will require the "Gen V/GenVI" design one-piece oil pan.

4.89 out of 5 stars ( 9 )

$2,672.08

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,265.99

—

$2,445.99

Haltech Nexus R3 VCU with Universal Wire-In Harness Kits

Haltech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full ECU manual and software located on the USB key provided with the VCU, or downloadable from the Haltech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.

Not Yet Reviewed

$2,799.00

Dart Big M Sportsman Big Block Chevy Cast Iron Bare Blocks

The foundation for a better big block build begins with Dart Big M Sportsman Big Block Chevy cast iron bare blocks. Dart engineered the Big M to be the strongest, most reliable, and easiest to build big blocks on the market. The Dart Big M Sportsman blocks feature: * Standard 9.800 in. and tall 10.200 in. deck heights available for Stroker engines * Standard 4.250 in., 4.500 in., or 4.600 in. bore sizes with Siamesed extra thick cylinder walls to resist cracking and improve ring seal (minimum .300 in. thick with 4.625 in. bore) * Uses +.300 in. tall Gen VI style lifters. Modifications for Gen IV style are also available * Scalloped outer water jacket walls improve coolant flow around the cylinder barrels to equalize temperatures * 4-bolt ductile iron main caps have splayed outer bolts for extra strength * True priority main oil system lubricates the main bearings before the lifters * Oil filter pad is drilled and tapped for an external oil pump * Lifter valley head stud bosses prevent blown head gaskets * Rear main cap uses standard oil pump and two-piece seal, no adapter required * Mechanical fuel pump boss, clutch linkage mounts, and side and front motor mounts simplify installation in chassis * Dual oil pan bolt patterns fit standard and notched oil pans * Coated cam bearings, freeze plugs and dowels not included * Small bore 396 version available

Not Yet Reviewed

$3,599.99

Haltech Elite 1500 ECU with Premium Universal Wire-In Harness

Haltech offers a variety of engine management systems, including the Elite 1500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Countless ECU, advanced tuning, and race functions * Outputs: Up to 4 injector and 4 ignition * Suits: Universal 1-12 cylinder or 2 rotor applications * Includes: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB software key.

Not Yet Reviewed

$2,049.00

—

$2,228.00

Haltech Nexus R5 VCUs

Haltech Nexus R5 VCUs feature innovative, yet user-friendly technology, setting a new market standard for engine management and power distribution systems. Haltech Nexus R5 VCUs are 5-in-1 tools; an ECU, a PDM, a high-speed Wi-Fi module, dual channel wideband controller, and a data logger--all natively interconnected with each other and all are programmable with one single piece of software. Features: * 18 Injector drivers * 12 Ignition drivers * 12 8A outputs * 4 25A outputs * 23 AVI * 10 SPI * 8 DPO * 2 Knock control * 2 DBW control * Flex Fuel Support * Inertial measurement sensor * 4-channel oscilloscope * 3 Independent CAN bus systems * Wireless communication * 150 channel, 1kHz data logging with 512mb of logging space * Dual channel O2 wideband controller capable of running LSU4.9 and NTK sensors * Automatic transmission control Nexus R5 kits include: * Nexus R5 VCU * SurLok connectors (red and black) * Wi-Fi antenna RP-SMA 108mm * Mounting bolts * USB-C cable * USB-C dust cap * USB drive with NSP software * Reverse mount VCU label * Quick-start guide and wiring diagrams

Not Yet Reviewed

$4,299.00

Ford Performance Parts Boss 351 C.I.D. Engine Blocks

Ford Performance Parts Boss 351 c.i.d. engine blocks are based on Windsor 351 architecture with Cleveland-sized 2.749 in. main bearing journals. Available in two deck heights, 9.2 in. and 9.5 in., they feature 4-bolt main caps and screw-in freeze plugs. Technological improvements, such as splayed main bolts, siamesed bores with engineered coolant cross-drilling, front crossover lifter oiling, and diesel-grade iron with 41,000 psi tensile strength separate Ford Performance Parts Boss 351 c.i.d. engine blocks from both stock and aftermarket blocks. They can accept a maximum stroke of up to 4.250 in., depending on the crankshaft/connecting rod manufacturer, with a maximum bore size topping out at 4.185 in. (sonic check recommended). Features include: * Available in standard and Big Bore versions * Supports displacements up to 460 cubic inches * Splayed 4-bolt main on 2, 3, 4, main caps * 2-bolt mains on 1 and 5 main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Requires special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Use common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * Compatible with original 302 and 351W blocks * Designed to use stock type timing cover (M-6059-D351 with fuel pump provision recommended) * Fits factory Mustang oil pan with custom oil pick-up tube M-6622-BOSS302 * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * 9.2 in. deck height blocks weigh approximately 195 lbs. * 9.5 in. deck height blocks weigh approximately 205 lbs. * Great price and value

5.0 out of 5 stars ( 2 )

$2,445.99

—

$2,644.99

Dart Big M Mark IV Big Block Chevy Full Water Cast Iron Bare Blocks

Dart is committed to producing the best engine components available, including the Dart Big M Mark IV big block Chevy full water cast iron bare blocks--engineered for applications where water between the bores is a requirement. Siamese bore versions are also available for larger bore applications. Features of the Dart Big M Mark IV big blocks include: * Standard 9.800 in. and tall 10.200 in. deck heights available * Standard 4.250 in. or 4.600 in. bore sizes * MRK IV blocks use the 2-piece rear seal design, while Gen V and Gen VI blocks use a 1-piece seal and a different timing cover pattern * 4-bolt main bearing caps in ductile iron have splayed outer bolts for extra strength * True priority main oiling (lubricates the main bearings before the lifters) * Mechanical fuel pump boss, clutch linkage mounts, and side and front motor mounts simplify installation in chassis * Lifter valley bosses for OE style roller lifters and retainer; (Non-Siamese blocks only)

Not Yet Reviewed

$4,334.99

Holley Off-Road 2014-18 Chevy/GMC Performance Packages

Gear up for your next off-road adventure with complete Performance Package upgrades from Holley Off-Road. They deliver performance systems from exhaust to brakes, tuners, suspension, and more, and their products are engineered to work together, ensuring you have everything you need to have fun on and off the road. Holley Off-Road 2014-18 Chevy/GMC performance packages are comprehensive upgrades specifically tailored to these pickups. The suspension upgrades feature ADS Racing Mesa 2.5 Series shocks, which are larger than stock, providing increased fluid capacity to prevent shock fade and deliver exceptional off-road durability combined with commuter comfort. The kits also include a Flowmaster Signature Series exhaust system, known for its hand-welded 304 stainless steel construction and balanced sound profile, offering an aggressive yet moderate tone. Additionally, these packages are equipped with a DiabloSport PredatorX, which provides pre-loaded tunes and customization options for optimal performance. Finally, the Big Claw performance rotors, designed for improved braking performance and enhanced cooling, ensure safety and reliability during high-performance driving. Features: * ADS Mesa 2.5 in. front coilovers: Premium shock absorbers are designed for maximum durability and performance, featuring a UV-stable ceramic powdercoated steel shock body and black anodized billet aluminum top and bottom caps. * ADS Mesa rear shocks: Filled with premium full synthetic shock oil, the shock absorber incorporates an internal floating piston (IFP) to ensure consistent damping performance, improved responsiveness, and increased longevity. * Flowmaster Signature Series exhaust: Premium exhaust system is TIG welded for a stronger, more precise weld that looks as good as it sounds. * Diablosport PredatorX: PredatorX is the latest in tuning technology. Using your smartphone, you can interface with PredatorX through our mobile app and handle all of your tuning needs, right from your pocket. * Baer Brakes: Baer Brakes Claw combo kits are a great way to improve your vehicles braking performance and overall appearance at an affordable price.

Not Yet Reviewed

$4,235.95

Holley Off-Road 2019-22 Chevy/GMC Performance Packages

Gear up for your next off-road adventure with complete Performance Package upgrades from Holley Off-Road. They deliver performance systems from exhaust to brakes, tuners, suspension, and more, and their products are engineered to work together, ensuring you have everything you need to have fun on and off the road. Holley Off-Road 2019-22 Chevy/GMC performance packages are comprehensive upgrades specifically tailored to these pickups. The suspension upgrades feature ADS Racing Mesa 2.5 Series shocks, which are larger than stock, providing increased fluid capacity to prevent shock fade and deliver exceptional off-road durability combined with commuter comfort. The kits also include a Flowmaster Signature Series exhaust system, known for its hand-welded 304 stainless steel construction and balanced sound profile, offering an aggressive yet moderate tone. Additionally, these packages are equipped with a DiabloSport InTune 3, which provides pre-loaded tunes and customization options for optimal performance. Finally, the Big Claw performance rotors, designed for improved braking performance and enhanced cooling, ensure safety and reliability during high-performance driving. Features: * ADS Mesa 2.5 in. front coilovers: Premium shock absorbers are designed for maximum durability and performance, featuring a UV-stable ceramic powdercoated steel shock body and black anodized billet aluminum top and bottom caps. * ADS Mesa rear shocks: Filled with premium full synthetic shock oil, the shock absorber incorporates an internal floating piston (IFP) to ensure consistent damping performance, improved responsiveness, and increased longevity. * Flowmaster Signature Series exhaust: Features a 3.00 in. inlet pipe leading into a TIG-welded 304 stainless steel Signature Series "straight-through" muffler for great sound and maximum performance. * Diablosport InTune 3 GM tune: Includes industry leading inTune 3 handheld tuner, along with the locksmith device and harnesses required to unlock both the ECM and TCM in your truck * Baer Brakes: Baer Brakes Claw combo kits are a great way to improve your vehicles braking performance and overall appearance at an affordable price.

Not Yet Reviewed

$4,607.95

35 Results Found For "gas+cap"