Availability
Showing In Stock Items. Show All 96 Items.
Already have a QA1 coil-over conversion system on your C10? QA1 C10 crossmember retrofit kits add powered rack and pinion steering, offers 2 in. of additional drop range (up to 8 in. total), and saves an additional 70 lbs. of weight. These bolt-in upgrades improved drivability and steering feel while achieving the perfect stance. Choose the kit for your model year. Features and benefits: * Powered rack and pinion steering -- Provides quicker and tighter steering, plus increased steering angle when fitting larger wheels and tires and improve geometry for enhanced drivability. * Improved ground clearance -- The tubular design makes your under cab rails the truck's lowest point. Updated lower shock mounts add clearance and new upper shock mounts increase travel for a great ride and performance, even at lower ride heights * Compatible with existing QA1 coilover systems -- Easily swap out a few components on your existing QA1 shocks and control arms, allowing you to upgrade your truck in stages, starting with coilovers and control arms * Easy, bolt-in installation -- The crossmember comes powder coated and ready to install, no cutting or welding your frame. It easily locates the steering rack, and you can choose mounts (sold separately) for common engines.
( 1 )
$2,450.95
iDEAL Equipment lift crossmember adapters allow you to use the MSC-18K-X to lift heavy-duty vehicles from the frame for wheels free lifting expanding service and maintenance options. Using these crossbeam adapters individually with the MSC-18K-X-236, 2-column lift, allow you to raise one end of a vehicle or in pairs using the MSC-18K-X-472, 4-column lift, to raise an entire vehicle. iDEAL Equipment lift crossmember adapters come with three sets of heavy-duty pads for use with specific lift point applications, two standard pad adapters, two axle pad adapters and two cradle pad adapters. Features and benefits: * 22,000 to 33,000 lb. capacity * 6 1/4 in. minimum to 110 in. maximum pad width * 20 in. minimum to 25 in. maximum pad height * 121 in. L x 53-1/4 in. W * Beam width is 8 in.
Not Yet Reviewed
$3,040.00
Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty
( 5 )
$4,095.00
—
$4,495.00
RideTech bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.
( 8 )
$2,025.00
—
$2,750.00
ReadyLift Suspension lift kits provide front and rear lift solutions to boost your vehicle's stance. They offer a huge selection of kits to give your truck, Jeep, or SUV just the right posture and attitude you are looking for. ReadyLift SST (Smart Suspension Technology) lift kits are the original mid-lift solutions for those who want more than what a leveling kit offers, but less overall height than that of a big lift. And for those of you wanting that BIG lift, they have complete kits that provide maximum lift and aggressive style. So whether you want a little or a lot, "Just don't lift it … ReadyLift it!"
( 2 )
$2,160.99
—
$3,299.95
Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware
( 5 )
$2,500.00
Clearance
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$4,363.99
—
$4,807.99
$3,000.50
—
$3,372.50
Clearance
Scott's Hot Rods 4-bar rear suspension kits have a simple design, but will greatly improve the ride quality and handling of your hot rod or custom. These truly equal length parallel 4-bars use a very long, perpendicular panhard bar to maximize efficiency and reduce lateral movement. Both user-friendly and fully adjustable, the kits also use their CNC-machined and tapped stainless steel rod ends with right-hand or left-hand thread, allowing you to adjust the pinion angle and setup without unbolting the link bars. And unlike a Triangulated 4-link system, the pinon angle does not change throughout the travel of the suspension. The kits are offered with coilovers or airbags. Your rear suspension is just as important as the front to the ride and handling of your car; install a Scott's Hot Rods 4-bar rear suspension kit and increase your driving pleasure. Additional notes and what's included: * CNC-machined 1 1/8 in. x 1/4 in. wall DOM tubing link and panhard bars (adjustable RH- and LH-thread) * Scott's utilize a bar as long as possible per vehicle application to ensure the least amount of lateral movement * CNC-machined stainless steel rod ends--RH- and LH-thread * FK Bearing heim joints--RH- and LH-thread * Aldan American single-adjustable coilovers or Firestone 9000 tapered air springs * Coilovers are the most popular for everyday cruisers * Airbag kits are for those who want to lay their vehicle on the ground * Upper shock crossmember is standard on all kits allowing you to determine final ride height when installing * Rear-end housing brackets * Front frame brackets * 5/8 in. Grade 8 hardware * Lifetime guarantee
( 4 )
$3,468.99
—
$3,857.99
$2,638.50
—
$2,935.50
RideTech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with RideTech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck
Not Yet Reviewed
$3,995.00
Helix Mustang II IFS suspension packages and kits will give your car or truck the excellent handling of independent suspension with added stopping power! IFS kits come in many different configurations with the necessary components and hardware. And with over a thousand kits to choose from, they are sure to have what you need to fit your wants and budget. From complete systems with chrome columns to their Stage 1 kits that allow you to use off-the-shelf components to complete your setup, and everything in between, Helix has the Mustang II IFS systems and kits to revolutionize your vehicle's suspension.
( 17 )
$2,199.95
—
$4,299.95
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 8 )
$3,625.99
Upgrade your classic truck to a modern driving feel and performance with QA1's 1963-1972 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while reducing weight 140 lbs. over stock. Order the QA1 1963-72 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Adjustable Shock Valving: Double-adjustable shocks offer independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement
( 4 )
$4,450.95
—
$4,650.95
"Now, that's a truck!" McGaughy's Black SS suspension lift kits give your rig a "real" lift. The kits are available for 6 to 10 in. of lift to boost your truck's stance and your ego. The elite adjustability is possible with the included front struts and because McGaughy's drops the crossmember and differential a full 7 in. This keeps your CV axles' angles, suspension geometry, and steering geometry at factory specifications. To keep these performance lifts looking good, they receive a durable, glossy black powdercoated finish. Plus, the front crossmember is accented with highly polished stainless steel inlays. Install one of McGaughy's SS lift kits, and the next time you hear, "Whoa, what a truck!" it will be referring to yours! McGaughy's SS suspension lift kits may include: * Lift spindles * Adjustable front struts or extenders * Crossmembers * Lower A-arm support rods * Tie rods * Sway bar drops and extenders * Skid plate * Fabricated lift blocks * Bump stop extenders * Brake line extenders * Rear shocks or extenders * U-bolts and necessary hardware
( 2 )
$2,832.99
—
$3,299.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement
( 1 )
$4,450.95
—
$4,650.95
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
QA1 1965-79 F-100 coilover conversion systems are suspension kits built with a purpose—just like your truck! With these all-new, engineered-from-scratch systems, you can stop using junkyard parts to modernize your pickup, and instead bolt in the handling and performance you've always wanted. The front systems are 3.75 in. narrower than a Crown Vic, providing ideal handling and allowing fitment of larger wheels and tires. They also save 150 lbs. of weight and provide 3 in. to 5 in. of drop with standard spindles and 5 in. to 7 in. with drop spindles. QA1 1965-79 F-100 coilover conversion systems are available in single and double adjustable styles with everything you need included, except engine mounts. Included in the systems: * Adjustable shocks * High-travel springs * Coil-over hardware * Upper and lower control arms * Upper and lower crossmembers * Rack and pinion steering * Stock or drop spindles * All required nuts, bolts, etc.
( 8 )
$4,162.95
—
$4,732.95
Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$2,664.95
—
$3,099.95
Give your rig a lift—via McGaughy's suspension lift kits! Their key components feature a brilliant gloss metallic silver powdercoat for longevity and durability. Installation is easy with minimal drilling; no re-routing of the exhaust, or cutting or grinding on the front or rear differential is necessary. This equipment is CNC-formed, machined, and laser-cut in-house from the highest grade materials. The spindles are CAD-designed for a perfect and accurate fit. Complete kits include the lower A-frame support rods, along with compression struts to add extra support and prevent the front and rear crossmembers from flexing. Dozens of kits are available for vehicles from the 1990s and up. Choose the style, lifted height, and other options recommended for your application; then elevate your rig to a higher stance with McGaughy's suspension lifts.
( 8 )
$2,310.99
—
$3,859.99
QA1 rear suspension conversion systems provide easy, bolt-in options to replace your coil springs on factory truck arms—without any cutting, welding, or other fabricating. Each kit contains frame brackets, axle brackets, linkage assemblies, a crossmember assembly, and necessary hardware. The conversions are available with coilovers or available for use with the factory springs. Order the model designed for fitment on your specific vehicle, and enjoy the stance, handling, and suspension performance of a revolutionary QA1 system.
( 18 )
$2,795.95
—
$3,101.95
QA1 1965-72 F-100 rear coilover conversion systems offer unprecedented adjustability and maximum performance without any binding issues, and the ability to achieve a 4 in. to 7 in. drop. These bolt-in systems can be installed without removing the bed and everything you need is included, right down to the hardware. Kits are available with single or double adjustable shocks, and some specific kits include QA1 MOD Series coilovers. Included in the systems: * Adjustable shocks * High-travel springs * Coil-over hardware * Adjustable trailing arms * Adjustable panhard bar * Panhard bar brace * Adjustable torque arm * Torque arm axle mount * Torque arm crossmember * All required nuts, bolts, etc.
( 4 )
$2,887.95
—
$3,101.95
QA1 1961-71 D100 independent front suspensions update your classic 2WD Dodge truck with coilover shocks and rack-and-pinion steering. The IFS kits instantly transforming the old-school feel of leaf springs and a straight axle to greatly enhanced truck performance with late-model drivability and the perfect lowered stance. QA1 coilovers make it easy to achieve the ideal look while tuning ride characteristics to meet your unique needs. Choose from kits that offer 3 to 4 in. of drop or 5 to 6 in. of drop to lower the front of your truck while gaining much better geometry. You also have the choice of single or double-adjustable coilovers. Kits come complete with everything you need to bolt in the system. Contents and features of QA1 D100 IFS kits: * Front crossmember * Tubular control arms * Steering rack * Spindles * Ball joints * Inner/outer tie rods * All necessary installation hardware * The kits can be bolted in with simple hand tools without any cutting, welding, or the use of a lift, and can be completed without removing the inner fender aprons * Single-adjustable shocks are recommended for trucks that will be used primarily on the street * Double-adjustable coilovers are recommended for trucks that will consistently be used for drag racing, autocross, or road racing
Not Yet Reviewed
$4,176.95
—
$4,470.95
All American Billet introduces their new Mustang II universal independent front suspension kits. The kits are specifically engineered for use with airbags of your choice, and are available for custom builds, such as cars or street rods. These suspension packages come complete with upper and lower tubular control arms, full crossmember, ball joints, cross shafts, Grade 8 hardware, and polyurethane bushings. All American Billet Mustang II front suspension kits are made of plain steel, and are ready to weld-in to allow you to implement your build and finish your project the way you want.
Not Yet Reviewed
$2,193.95
RideTech StrongArm suspension systems utilize an offset trailing arm with a "trussed" design which allows maximum tire width while providing the utmost in strength. The rear trailing arms have PTFE bearings, and the strut rods are outfitted with R-joint rod ends to combine the best qualities of low-friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack. When combined with the tubular rear crossmember, the trailing arms place the coilovers to the rear of the axle for better motion ratio and damping control while providing additional height adjustment via the movable lower coilover mounts. Features and benefits: * Lowers vehicle ride height * Mounting hardware to maintain ground and tire clearance, driveline angles, and load capacities * Bolt-on installation (no fabrication required) * Greatly improved handling performance * Ultimate ride quality
Not Yet Reviewed
$2,555.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
