34 Results Found For "cell"

Showing In Stock Items. Show All 102 Items.

Not Showing Customizable Items. View Customizable Items.

Individual Parts

Part Groups

Results 1 - 24 of 34

Aeromotive Brushless A1000 Fuel Cells with Speed Controller

Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy top-level performance with advanced technology when you order the Aeromotive Brushless A1000 Fuel Cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an A1000 brushless fuel pump, and aircraft-style filler cap * All-aluminum construction and matches design used in Ford Cobra Jet, Chevy COPO Camaro, and many of the MOPAR Drag Pack cars * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional A1000 models and uses a reduced current draw at higher EFI pressures * Outlet ports are female ORB-10 * Return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 900 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 700 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire

Not Yet Reviewed

$2,343.40

—

$2,516.91

Aeromotive Eliminator Brushless Fuel Cells with Speed Controller

Aeromotive offers various Eliminator brushless fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy Eliminator performance with advanced technology when you order the Aeromotive Eliminator brushless fuel cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an Eliminator brushless fuel pump, and aircraft-style filler cap * All-aluminum construction * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional Eliminator models and uses a reduced current draw at higher EFI pressures * Outlet and return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 1,300 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 1,000 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire

Not Yet Reviewed

$2,586.62

—

$2,759.05

Aeromotive 5.0 GPM Brushless Spur Gear Pump Fuel Cells

Aeromotive 5.0 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated 100-micron pre-filter. Order the Aeromotive 5.0 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Triple male wire threaded stud terminals * Not compatible with pulse modulated systems or fuel pump speed controllers

4.0 out of 5 stars ( 2 )

$2,351.99

—

$3,116.49

Aeromotive 3.5 GPM Brushless Spur Gear Pump Fuel Cells

Aeromotive 3.5 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated pickup and 100-micron pre-filter. Order the Aeromotive 3.5 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * All-aluminum construction with a natural finish * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Continuous 90 psi operating pressure and up to 150 psi peak pressure, base plus boost * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Not compatible with pulse modulated systems or fuel pump speed controllers * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * ORB-12 inlet (application specific) * Fixed speed models are ideal for blow-through carbureted racing engines up to 2,000 hp (at the flywheel) * Fixed speed models swappable to True Variable Speed (TVS) with 18047 retrofit kit * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * Triple male wire threaded stud terminals

Not Yet Reviewed

$2,828.24

—

$2,978.68

Aeromotive Brushless A1000 Fuel Cells

Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy top-level performance with advanced technology when you order the Aeromotive Brushless A1000 Fuel Cells best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an A1000 brushless fuel pump, and aircraft-style filler cap * All-aluminum construction with a natural finish * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional A1000 models and uses a reduced current draw at higher EFI pressures * Outlet ports are female ORB-10 * Return ports are female ORB-08 * Roll-over protected -8 AN vent * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 900 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 700 lbs./hr. at 45 psi, 13.5 volts * Threaded male studs/3-wire

5.0 out of 5 stars ( 1 )

$2,228.10

Aeromotive True Variable Speed Brushless Spur Pump Fuel Cells

Experience ground shaking performance with the advanced technology of the Aeromotive true variable-speed brushless spur pump fuel cells. The Aeromotive true variable-speed controller offers the advantages of built-in pump speed control via a dedicated 0-5 V analog DC input signal. The variable-speed controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling. Features and benefits: * E85 compatible, reduce max FWHP by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 60 psi continuous operating pressure and up to 100 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB -12 inlet and ORB -10 outlet ports * Requires straight 12-VDC to 16-VDC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports fuel injected engines: – up to 6,900 FWHP on Gas—naturally aspirated – up to 4,900 FWHP on Gas—forced air induction – up to 4,830 FWHP on E85—naturally aspirated – up to 3,430 FWHP on E85—forced air induction – up to 2,415 FWHP on Methanol—naturally aspirated – up to 1,715 FWHP on Methanol—forced air induction Supports carbureted engines: – up to 7,600 FWHP on Gas—naturally aspirated – up to 5,500 FWHP on Gas—forced air induction – up to 5,300 FWHP on E85—naturally aspirated – up to 3,850 FWHP on E85—forced air induction – up to 2,650 FWHP on Methanol—naturally aspirated – up to 1,925 FWHP on Methanol—forced air induction Note: This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.

Not Yet Reviewed

$3,083.01

—

$3,278.98

Longacre Elite Pro Wireless Dual Load Cell Scales

Introducing the innovative Elite Pro Wireless Dual Load Cell Scales by Longacre. These feature-packed scale systems are set to revolutionize the way you take measurements, both on the track and in your shop. Each comprehensive system comes complete with a tablet (except P/N 52-82729), 15 in. x 15 in. low-profile pads featuring a powdercoat finish, and a scale pad case, providing you with a ready-to-use solution right out of the box. Seamlessly connect it to the new and improved Longacre Connect app, which is compatible with both Android and iOS devices, and enjoy free app updates that will continually enhance its functionality over time. With extended Bluetooth connectivity, you can take measurements with ease, whether you're indoors or outdoors, as it provides an increased range and effortless connection between your pads and your device. The app allows you to view live weights and memory sessions side-by-side, presenting all weights and percentages simultaneously for your convenience. Longacre has also enhanced the note-taking organization and memory capacity, making it easier than ever to keep track of your measurements. When you need to analyze your data or share it with others, our simplified data export procedure transfers all selected data to your computer seamlessly. Plus, you can monitor the pad battery status directly from the Longacre Connect app's home screen, ensuring that you're always ready to measure accurately. Longacre's internal bridged pad design is the secret behind the precision of each system. It eliminates pad flex, guaranteeing accurate measurements even when dealing with off-centered loads. With the comprehensive Elite Pro Wireless Dual Load Cell Scales System, taking measurements has never been more efficient or convenient. Key features: * Dual load cell per pad; 3,000 lbs. or 1,800 lbs. per pad capacity (depending on model) * Completely redesigned for 2024 with the latest Bluetooth 5.0 technology to ensure a hassle-free user experience. * Extended Bluetooth connectivity provides increased range in any setting, indoor or outdoor. * Effortlessly connect your scales to your preferred Android or iOS device with a simplified, but secure, pairing process. * Longacre's most feature-packed scale system to date! Taking measurements has never been more efficient and convenient. * View live weight and saved data simultaneously on the main, user-configurable screen, including corner weights and partial percentages. * Benefit from additional note-taking, organization, ride-height, and alignment pages. * Extended memory capacity saves all setup data and allows effortless data export through email or file-sharing using the wireless device. * Monitor battery status of all 4 pads directly from the app. * Complete system includes: Android tablet (except P/N 52-82729); 15 in. x 15 in. low-profile pads with a durable powdercoat finish, storage case, and batteries. * Pre-configured system is ready to use out of the box. Bring your own device and pair with the new and improved Longacre Connect app for Android and iOS, offering free app updates. * Longacre's internal bridged pad design ensures precise readings by eliminating pad flex, providing accurate measurements even with off-centered loads.

Not Yet Reviewed

$3,200.99

—

$3,599.99

Longacre Elite Pro Wireless Single Load Cell Scales

Introducing the innovative Elite Pro Wireless Single Load Cell Scales by Longacre. These feature-packed scale systems are set to revolutionize the way you take measurements, both on the track and in your shop. The comprehensive systems come with 15 in. x 15 in. low-profile pads, and a scale pad case, providing you with a ready-to-use solution right out of the box. Seamlessly connect your own device to the new and improved Longacre Connect app, which is compatible with both Android and iOS devices, and enjoy free app updates that will continually enhance its functionality over time. These systems do not come with a tablet. With extended Bluetooth connectivity, you can take measurements with ease, whether you're indoors or outdoors, as it provides an increased range and effortless connection between your pads and your device. The app allows you to view live weights and memory sessions side-by-side, presenting all weights and percentages simultaneously for your convenience. Longacre also enhanced the note-taking organization and memory capacity, making it easier than ever to keep track of your measurements. When you need to analyze your data or share it with others, the simplified data export procedure transfers all selected data to your computer seamlessly. Plus, you can monitor the pad battery status directly from the Longacre Connect app's home screen, ensuring that you're always ready to measure accurately. Longacre's internal bridged pad design is the secret behind the precision of these systems. It eliminates pad flex, guaranteeing accurate measurements even when dealing with off-centered loads. With the feature-packed Elite Pro Wireless Single Load Cell Scales, taking measurements has never been more efficient and convenient. Key features: * Single load cell per pad, 1,500 lbs. per pad capacity * Completely redesigned for 2024 with the latest Bluetooth 5.0 technology to ensure a hassle-free user experience. * Extended Bluetooth connectivity provides increased range in any setting, indoor or outdoor. * Effortlessly connect your scales to your preferred Android or iOS device with a simplified, but secure, pairing process. * Longacre's most feature-packed scale system to date! Taking measurements has never been more efficient and convenient. * View live weight and saved data simultaneously on the main, user-configurable screen including corner weights and partial percentages. * View live weight and saved data simultaneously on the main, user-configurable screen including corner weights and partial percentages. * Benefit from additional note-taking, organization, ride-height, and alignment pages. * Extended memory capacity saves all setup data and allows effortless data export through email or file-sharing using the wireless device. * Monitor battery status of all 4 pads directly from the app. * Complete system includes: 15 in. x 15 in. low-profile pads with a durable powdercoat finish, storage case, and batteries. * Pre-configured system is ready to use out of the box. Bring your own device and pair with the new and improved Longacre Connect app for Android and iOS, offering free app updates. * Longacre's internal bridged pad design ensures precise readings by eliminating pad flex, providing accurate measurements even with off-centered loads.

Not Yet Reviewed

$2,300.99

On Sale

Holley Fuel Cell EFI Pump Module/VR Series Brushless Fuel Pump Assemblies

Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator

Not Yet Reviewed

$3,199.95

Longacre Elite Wired Dual Load Cell Scales

Introducing the innovative new Longacre Elite Wired Dual Load Cell Scale Systems, revolutionizing the measurement process with unparalleled efficiency and convenience. These comprehensive systems include a control box housed in a durable case, 15 in. x 15 in. low-profile pads featuring a powdercoat finish for optimal grip, and a pad carrying case, all ready for immediate use straight out of the box. What sets each system apart is seamless integration with your personal tablet or phone, made possible by the newly enhanced Longacre Connect app, available for both Android and iOS devices and featuring free app updates. Setting up your measurements is a breeze with the included cables that effortlessly connect the pads to the control box. You can then link the system to your personal device via Bluetooth, ensuring hassle-free measurements. Whether you're working indoors or outdoors, Longacre's extended Bluetooth connectivity provides an increased range for your convenience. The control box display is a game-changer, offering quick access to all four wheel weights, cross weight, as well as partial percentages and weights with just the push of a button. Alternatively, you can view live weights and memory sessions side-by-side, along with all weights and percentages simultaneously, using the Longacre Connect app on your personal device. These systems enhance your note-taking and data organization, boasting improved memory capacity and streamlined data export capabilities through the Longacre Connect app. Plus, with an internal bridged pad design that eliminates pad flex, you can trust that your measurements will remain accurate even with off-centered loads. Say goodbye to the complexities of measurement-taking—Elite Wired Dual Load Cell Scales provide a user-friendly, comprehensive solution for your needs. Key features: * Dual load cell per pad, 1,800 lbs. per pad capacity * Longacre's most feature-packed, wired scale system to date! All Elite wired scales now include Bluetooth 5.0 connectivity for 2024, providing a hybrid user experience in a traditional wired-scale package. * Elite scales function as a standalone wired scale system that can also be used as a powerful, wireless racing setup tool. * Effortlessly connect your scales to your preferred Android or iOS device with a simplified, but secure, pairing process. * Control box display shows all 4 wheel weights, cross weight, and partial percentages/weights. A single memory session can be saved for quick retrieval through the control box display. * Optionally pair with the Longacre Connect app to expand the capabilities of the Elite system. Taking measurements with wired scales has never been more efficient and convenient. * View live weight and saved data simultaneously on the main, user-configurable screen including corner weights and partial percentages. * Benefit from additional note-taking, organization, ride-height, and alignment pages. * Extended memory capacity saves all setup data and allows effortless data export through email or file-sharing using the wireless device. * Complete system includes: 15 in. x 15 in. low-profile pads with a durable powdercoat finish, storage case, and batteries. * Pre-configured system is ready to use out of the box. Bring your own device and pair with the new and improved Longacre Connect app for Android and iOS, offering free app updates. * Longacre's internal bridged pad design ensures precise readings by eliminating pad flex, providing accurate measurements even with off-centered loads.

Not Yet Reviewed

$3,144.99

Aeromotive 5.0 GPM Brushless Variable Speed In-Tank Spur Gear Pumps

Aeromotive 5.0 GPM brushless variable speed in-tank spur gear pumps help deliver ground-shaking performance with advanced technology. These pumps are lighter than the traditional Pro-Series models and feature reduced current draw at higher, EFI pressures. They also provide extended service life in methanol and ethanol, while using an integral spur-gear pumping mechanism for precise, positive-displacement. Order the Aeromotive 5.0 GPM brushless spur gear pump best suited for your application. Additional features, items, and specifications include: * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Continuous 90 psi operating pressure and up to 150 psi peak pressure (base plus boost) * EFI rated flow of 1,700 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,850 lbs./hr. at 9 psi (13.5 V) * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Not compatible with pulse modulated systems or fuel pump speed controllers

Not Yet Reviewed

$2,087.44

—

$2,307.17

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$2,399.95

—

$2,609.95

$2,158.95

—

$2,347.95

American Racing Headers C7 Corvette Headers

American Racing Headers C7 Corvette headers are available with options that allow you to fine-tune your exhaust system to match your upgrades. ARH C7 systems set the bar for quality, performance, fit, and ease of installation. Options include a variety of primary sizes and your choice of X-pipe midsection diameters, ARH's exclusive X-pipe forward location (on select models), and severe-duty cats. Long systems end at the rear axle and are a direct fit to stock or aftermarket axle-back exhausts. ARH also offers mid-length header systems; a more emissions friendly option for C7s. Their mid-length kits allow you to reuse the secondary set of factory cats combined with ARH's severe-duty catalytic converters. These systems improve performance yet significantly reduce the possibility of a check engine light. All ARH C7 kits are direct bolt ons; expect a quick and easy install with the included Grade 8 hardware, race-quality gaskets, and stainless steel band clamps (where applicable). They will surpass your expectations in quality and performance. Additional features of American Racing Headers C7 Corvette headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability * The only set of headers you'll ever need to buy * All American Racing Headers exhaust systems are for off-road use only

5.0 out of 5 stars ( 1 )

$2,735.91

—

$2,908.16

Longacre Elite Pro Wireless Scales

Introducing the innovative Elite Pro Wireless Scales by Longacre. These feature-packed scale systems are set to revolutionize the way you take measurements, both on the track and in your shop. This comprehensive system comes complete with a tablet, 15 in. x 15 in. (or 12 in. x 12 in.) low-profile pads featuring a powdercoat finish, and a scale pad case, providing you with a ready-to-use solution right out of the box. Seamlessly connect it to the new and improved Longacre Connect app, which is compatible with both Android and iOS devices, and enjoy free app updates that will continually enhance its functionality over time. With extended Bluetooth connectivity, you can take measurements with ease, whether you're indoors or outdoors, as it provides an increased range and effortless connection between your pads and your device. The app allows you to view live weights and memory sessions side-by-side, presenting all weights and percentages simultaneously for your convenience. Longacre has also enhanced the note-taking organization and memory capacity, making it easier than ever to keep track of your measurements. When you need to analyze your data or share it with others, the simplified data export procedure transfers all selected data to your computer seamlessly. Plus, you can monitor the pad battery status directly from the Longacre Connect app's home screen, ensuring that you're always ready to measure accurately. Longacre's internal bridged pad design is the secret behind the precision of each system. It eliminates pad flex, guaranteeing accurate measurements even when dealing with off-centered loads. With the comprehensive Elite Pro Wireless Scales, taking measurements has never been more efficient or convenient. Key features: * Available in 1,500 lb. or 1,100 lb. capacities per scale (single load cell per pad) * Completely redesigned for 2024 with the latest Bluetooth 5.0 technology to ensure a hassle-free user experience. * Extended Bluetooth connectivity provides increased range in any setting, indoor or outdoor. * Effortlessly connect your scales to your preferred Android or iOS device with a simplified, but secure, pairing process. * Longacre's most feature-packed scale system to date! Taking measurements has never been more efficient and convenient. * View live weight and saved data simultaneously on the main, user-configurable screen including corner weights and partial percentages. * View live weight and saved data simultaneously on the main, user-configurable screen including corner weights and partial percentages. * Benefit from additional note-taking, organization, ride-height, and alignment pages. * Extended memory capacity saves all setup data and allows effortless data export through email or file-sharing using the wireless device. * Monitor battery status of all 4 pads directly from the app. * Complete system includes: Android tablet, 15 in. x 15 in. (or 12 in. x 12 in.) low-profile pads with a durable powdercoat finish, storage case, and batteries. * Pre-configured system is ready to use out of the box. Bring your own device and pair with the new and improved Longacre Connect app for Android and iOS, offering free app updates. * Longacre's internal bridged pad design ensures precise readings by eliminating pad flex, providing accurate measurements even with off-centered loads.

2.5 out of 5 stars ( 2 )

$2,399.99

—

$2,500.99

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,249.95

$2,023.95

Computech RaceAir Cloud Deluxe Weather Stations

Computech RaceAir Cloud Weather Stations are the most accurate and comprehensive trailer weather stations on the market. They provide every weather variable you need, including sunlight intensity, and can deliver it to you through text message or your own pager. Choose from these four package options: * RaceAir Cloud Deluxe Model comes with all capabilities: Sunlight, Wind, Paging, Texting, Pole, Hardware, Weather Software, Logbook Software * RaceAir Cloud Base Model comes everything the Deluxe model has, except it does not have Wind Speed and Direction or Paging capability. * RaceAir Cloud Wind Model comes everything the Deluxe model has, except it does not have Paging capability. * RaceAir Cloud Page Model comes everything the Deluxe model has, except Wind Speed and Direction capability. Weather Station feature descriptions: * The RaceAir Cloud incorporates the ability to add Wind Speed and Wind Direction * You can now get updated ET and Throttle Stop predictions, as well as all of your weather variables direct to your phone. The text message feature will require an internet connection at the trailer. However, by using phone and tablet hot spots this has become easier than ever. * If purchased with the optional paging feature, you will receive your own closed circuit paging network that does NOT require any internet or cell phone service. This is the most reliable way to ensure you can get your up-to-date weather to the staging lanes regardless of cell service. When used in the RaceBase Logbook program or the Crew Chief Pager-enabled software, you can also get up-to-date ET Predictions. * The new sunlight intensity meter will give you a definitive value for how intense the sunlight was during the pass. With the new Sunlight value, you can measure the sun's intensity in terms of Lux x 1,000. This allows you to see exactly when clouds came in and what effect they had on other weather variables and your performance. * Computech supplies you with outdoor pole mounting brackets designed to fit in existing trailer flashing screw holes, and an indoor trailer storage bracket to keep your Cloud safe during transport. (Optional models include either a 4 to 8 ft. or 6 to 12 ft. expandable cam lock pole, as well as trailer storage brackets for the pole to ensure they are secured during transport.) * Setting up and flying your RaceAir Cloud is as simple as plugging the Cloud in, placing it on the pole, placing the pole in the supplied brackets and firing up the software. * RaceBase Weather software will automatically search for you and connect without you having to do anything. Simply open the software, plug in the weather station and turn it on. * When used hand in hand with a logbook program, your RaceAir Cloud gains the ability to text or page you up-to-date weather and ET or Throttle Stop predictions. With the included RaceBase Logbook program you can connect to the RaceBase Weather software, keep track of multiple cars, and input all the important run and setup information for each pass. Includes a single run prediction, database prediction, throttle stop prediction, Holley and fuel injection tuning, run completer, drag racing-specific formulas, and much more. * Optional Trailer Install Kit includes three separate cables: a short 2 ft. Interface Box cable, a 30 ft. or 40 ft. Trailer Wall cable, and an 8 ft. or 12 ft. Cloud cable. The trailer wall cable will come with one flange mount Deutsch pre-installed and the other end bare so you can run it through any trailer wall or flashing. Kits also come with open barrel terminals, shrink tube, and the final flange mount to finish the clean installation.

Not Yet Reviewed

$2,849.95

—

$2,999.95

PRW Low-Profile ETS Accessorized Engine Test Stands

PRW low-profile ETS accessorized engine test stands are the first U.S. patent collapsible design manufactured with standard parts and readily available replacement parts from the manufacturer. For the small shop or race trailer, the ETS engine test stands are a real space-saver when collapsed. The stands are available as a base unit for the do-it-yourselfer, or accessorized with a radiator, electric fan, fuel cell, momentary starter switch, on-off switches, pre-drilled instrument panel, oil pressure gauge, water temperature gauge, and 0-8000 rpm tachometer. These low-profile ETS test stands are designed to accommodate most engines and are built to meet the demands of high-output racing engines and heavier big blocks—taking mobile engine test stands to a new level of functionality.

Not Yet Reviewed

$2,511.14

On Sale

Holley VR Series Billet Fuel Pumps

Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.

5.0 out of 5 stars ( 1 )

$3,299.95

$2,968.95

Aeromotive 3.5 GPM Brushless Variable Speed In-Tank Gear Pumps

Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.

Not Yet Reviewed

$2,009.56

—

$2,130.34

American Racing Headers Late Model Ford Mustang Headers

American Racing Headers late model Ford Mustang headers are available for a wide variety of Mustang engines and models; every set provides a serious bump in horsepower and torque. Select headers come with an X-pipe standard, if you prefer a more classic muscle-car sound, swap the X-pipe for an optional H-pipe. Either choice provides a low-rasp, drone-free driving experience. ARH Direct Connect kits for Mustangs are designed to work with original equipment cat-back systems without any cutting or welding. For Corsa cat-back exhaust systems, check out ARH's Direct Connect kit specifically made to work with Corsa cat-backs. ARH Mustang headers with Bottleneck Eliminator kits do away with the 2.25 in. restriction at the cat-back connection point of some OE 5.0L systems. They are specially built to fit aftermarket cat-back systems; a simple mark and cut (no welding required) mates the ARH Bottleneck Eliminator to your cat-back. ARH long system headers for 2012-14 Boss Mustangs even allow you to keep the Boss side pipes. Additional features of American Racing Headers late model Ford Mustang headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * The only headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only

Not Yet Reviewed

$2,139.72

On Sale

FiTech Ultimate LS 1,000 HP EFI Short LS3 Port Intake Fuel Injection Master Kits

Finishing your LS swap is now easier with FiTech Ultimate LS systems. Available with or without transmission control, FiTech Ultimate LS EFI master kits are supplied with options for fuel delivery systems, as well as their Go Fuel regulators and Go Spark LS3 performance coils. FiTech Ultimate LS 1,000 hp EFI short LS3 port intake fuel injection master kits package either a 440 lph in-tank pump for tanks with a depth of 6 to 15 in. or an in-tank dual pump module (two 340 lph pumps) that is ideal for fuel cells or custom tanks. Along with the fuel delivery, kits also contain a Go Fuel regulator—Tight Fit with gauge that supports up to 1,000 hp or a FiTech High Horsepower with gauge that supports up to 2,000 hp. Both are crafted from billet aluminum and feature -6 ORB ports and a vacuum/boost port. If you wish to add a fresh jolt of energy to your LS EFI swap, you can complete these kits with FiTech Go-Spark LS coil packs. Available with or without a built-in LED that flashes when the coils fire, the coils bolt-in place of the originals and accept the sealed, locking connector and plug wire terminal for a simple upgrade, delivering optimum output with a quality fit and reliability. Select the FiTech Ultimate LS 1,000 hp kit for your engine with the options you prefer. FiTech Ultimate LS 1,000 intake manifold kit features: * Fabricated 3mm thick aluminum sheet metal and TIG welded * Cast, cable activated billet aluminum 102mm throttle body * Handheld controller with color touch screen and cable * Windshield mount for touch screen controller * LS ECU * 80 lb./hr. injectors * High volume billet fuel rails * Self-learning technology maintains your target air/fuel ratio settings * Sequential fuel and spark control with individual cylinder trim * Connects to 24x and 58x cam sensors * Knock sensor control connects to factory sensors * 3-Bar MAP sensor for boosted applications up to 30 psi * Tach output driver works with most tachometers * Two programmable electric fan outputs * Supplied with WBO2 sensors * Custom wiring harness for a direct plug-in installation * Systems with transmission control allows shift point and firmness adjustments on 4L60/65/80/85 GM transmissions

Not Yet Reviewed

$2,846.99

—

$3,572.99

$2,562.29

—

$3,215.69

On Sale

FiTech Go EFI 2x4 PA 1200 HP System Fuel Injection Master Kits

FiTech Go EFI 2x4 PA 1,200 hp fuel injection master kits deliver the Power Adder system with a Go Fuel dual pump fuel delivery solution, providing everything you need to convert your carbureted vehicle to EFI—all with one part number. Go EFI 2x4 Power Adder system will make a statement feeding your 671 or 871 roots blower with a pair of powerful throttle bodies that are able to support up to 1,200 hp on a naturally aspirated engine. One throttle body houses the ECU, while the other secures the Idle Air Control solenoid and four more injectors. The system is supplied with a handheld touch screen controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty information. The throttle bodies are available in two finishes and systems are available with or without FiTech's Go-Spark CD ignition for improved combustion and power output of your engine. The Go Fuel returnless dual pump module is an ideal high-pressure fuel solution for fuel cell or custom tank. The 340 lph pumps can handle up to 1,600 hp, and feature billet top assemblies machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware.

Not Yet Reviewed

$2,840.99

$2,556.89

On Sale

FiTech Go EFI 3x2 Tri-Power 600 HP System Fuel Injection Master Kits

FiTech Go EFI 3x2 Tri-Power 600 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their Tri-Power systems with either a Go Fuel in-tank (regulated) or fuel cell single pump module to provide everything needed to convert your carbureted vehicle to EFI. Choose the master kit with your preferred fuel delivery solution. FiTech's Go EFI Tri-Power system is supplied with three 500 cfm throttle bodies and their self-learning EFI technology to provide the looks you want with the performance and drivability benefits that only fuel injection can deliver. Supporting up to 600 hp, the 3x2s are designed for a simple, ready-to-run installation. The compact ECU is easy to mount and only a few engine parameters are needed to get your hot rod engine fired up. The system includes three throttle bodies, remote ECU, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Fuel delivery options: Go Fuel regulated in-tank pump modules are offered in different flow rates, and they include gaskets, terminals, and clamps. Go Fuel single fuel cell pump modules features a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware.

Not Yet Reviewed

$2,572.99

$2,315.69

Page 1 of 2
Next