Availability
Chevrolet Performance Gen V LT1 head cam kits will increase your already-strong LT1. With CNC-ported heads and a camshaft designed specifically for direct injection, these kits offer the first "Hot Cam" for the Gen V LT1. Your kit may include: * Camshaft * Valve lifter guide * Valve lifters * CNC cylinder head assembly Note: Recalibration is required for accurate engine operation.
Not Yet Reviewed
$3,702.92
Give your Mustang more muscle! COMP Cams CR Series camshafts increase power and torque capabilities throughout the curve. They greatly improve upon stock Coyote camshafts and work without modifications to the engine's cylinder heads or phasers. Camshafts are the best way to unlock the power potential of your Coyote engines. The CR Series is offered in three stages for naturally aspirated and turbo engines, as well as two separate grinds for blower applications. Designed to be a direct replacement, the CR Series camshafts, they are compatible with the stock valve springs and the new Ford mid-lock phaser system—without requiring limiters or any other phaser modifications.
Not Yet Reviewed
$2,013.95
COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.
( 1 )
$2,049.95
—
$3,021.95
AFR 195cc SBC Eliminator Street Heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. AFR 195cc heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect street heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your vehicle and engine.
( 40 )
$2,052.75
—
$2,328.90
S&S Cycle offers 129 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,359.95
Race-ready AFR 220cc SBC Eliminator racing heads feature 100 percent CNC-ported intakes with greater detail. They also come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. They also offer exceptional flow characteristics, a 23 degree valve angle, and standard valve spacing. These cylinder heads are perfect for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts).
( 22 )
$2,259.60
—
$3,423.00
Dart Pro 2 aluminum cylinder heads have been revised with larger 2.350 in. intake valves and a new port design for improved airflow and a substantial power increase. They're designed to make competitive engine building easier and less expensive by incorporating the rugged features of Dart's Race Series casting into ready-to-use, professional-quality cylinder heads. Every intake port, every exhaust runner, every valve bowl, and every combustion chamber is 100 percent digitally CNC-machined for the ultimate in consistency. These cylinder heads are available as bare castings or fully assembled. The fully assembled heads include stainless steel valves, valve springs, retainers, locks, and valve seals.
Not Yet Reviewed
$3,594.86
—
$3,716.16
Ford Performance Parts Gen 3 Predator cylinder heads are improved high-performance castings, providing added strength and increased size of the central cooling passages to support higher horsepower engine builds. Features: * Fully CNC ported intake ports, exhaust ports and combustion chamber * Larger port sizing than the 2015-17 5.0L Coyote cylinder heads * 38.3mm intake valve and 32.5mm exhaust valve * New valvetrain geometry allows for higher valve lift * Lightweight hollow-stem intake valves and sodium-filled exhaust valves * Stiffer exhaust valve springs * Upgraded valve guides * Upgraded exhaust valve seat * Loaded head assembly minus camshafts, rocker arms, and lash adjusters
Not Yet Reviewed
$2,189.99
S&S Cycle offers 129 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,559.95
S&S Cycle offers 132 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Additional details: * Available with 132 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 132 cam cover badge * 132 Power Pack: Stock heads, 550 cam, stealth AC, stock throttle body, S&S manifold, power tune duals, MK45 muffler * Recommended for closed course competition racing
Not Yet Reviewed
$3,359.95
The S&S Cycle 124 in. power packages with chain drive cam are the ideal combination of performance and savings to transform a Harley-Davidson® motorcycle without breaking the bank. Each kit is tailored with the necessary components for your specific HD® model. These kits offer significant benefits in terms of increased horsepower and torque, particularly noticeable in the mid-range and top-end of the rpm band, making for a more powerful and responsive riding experience, especially when paired with other performance upgrades like ported heads and high-flow exhaust systems. Many power packages allow for customization by choosing different cam profiles to tailor the power delivery to your riding style, whether you prioritize low-end torque or high-end horsepower. Most 124 in. power packages are designed as "bolt-on" kits, meaning they can be installed without requiring extensive engine machining, making the upgrade process relatively simple. Select the 124 in. power package kit with chain drive cam designed for your application.
Not Yet Reviewed
$3,265.95
AFR 210cc SBC Eliminator racing heads are available in two stages of performance. The race-ready version features 100 percent CNC-ported intakes—and 100 percent CNC-ported intakes with greater detail. They come with 100 percent CNC-ported combustion chambers and 80cc exhaust ports with a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.080 in. intakes and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make these the perfect cylinder heads for 350 to 400 c.i.d. engines in bracket drag cars, sportsman oval trackers, and highly modified street-class cars operating between 3,000 and 7,500 rpm (higher rpm ranges are possible, depending on the combination of parts). The 210cc aluminum cylinder heads are available for either standard or spread port exhausts, bare or assembled style.
( 16 )
$2,259.60
—
$3,502.80
S&S Cycle offers 128 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Available in both chain drive and gear drive variations VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars CAM CHAIN TENSIONER: * Precision-machined from billet aluminum * Thicker shoe for longer wear * Direct chain oiling * Larger piston for more consistent pressure * Tighter tolerances improve stability
Not Yet Reviewed
$3,265.95
S&S Cycle offers 128 in. power packages with gear drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. Kit details include: BIG BORE KIT: * 4.250 in. bore * Forged pistons * 11.1:1 compression ratio OIL PUMP/CAM PLATE: * Precision-machined from billet aluminum * Passage plugs removable for servicing * Independent scavenge sections for flywheel cavity and cam chest * Debris screens in both scavenge pickups * Magnet in cam chest to help stop debris from entering oil pump * Increased flow capacity on both feed and scavenge side * Pressure relief valve is adjustable with unit installed in engine * Kits now include updated oil pump with groove for optional OEM oil seal PUSHRODS: * Quickee pushrods with chrome covers TAPPETS: * Hand-assembled to exacting tolerances * Reduced valvetrain noise from start-up to shut-down * Close tolerances for low leak-down rates * Fast pump-up and superior high-RPM performance TAPPET CUFFS: * Hard anodized black coating * Billet aluminum construction * Stronger than stock material eliminates distortion * Improve tappet stability in high lift and high RPM situations CAM: * S&S 550 cam—designed for big bore applications * Gear drive kits provide improved cam timing accuracy and eliminate stock chain tensioner * Gear drive kits include outer drive gears VALVE SPRINGS: * Work well with cams up to .605 lift * High performance conical single-wire spring * Includes top collars, keepers, and valve seals/bottom collars
Not Yet Reviewed
$3,460.95
AFR 195cc SBC Eliminator competition heads are fully CNC-machined (combustion chamber, intake, and exhaust ports) and available in your choice of straight or angled plug versions. These heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port with competition porting and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight 8mm, 2.050 in. intakes (competition versions are 2.080 in.) and 1.600 in. exhausts with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. The exceptional flow characteristics of the AFR 195cc Eliminators, a 23 degree valve angle, and standard valve spacing make them the perfect competition heads for 350 to 400 c.i.d. engines in the 2,000 to 6,500 rpm operating range. They carry CARB #D-250-2 when used on 1969-94 applications with the heat riser. Order the bare or assembled model recommended for your year/make and engine family.
( 3 )
$2,776.20
—
$3,166.80
If huge horsepower is what you're searching for, then AFR 345cc Magnum BBC cylinder heads will certainly deliver. They're recommended for radical street/strip, Pro Street, or racing applications on engines up to 572 cu. in. operating below 7,000 rpm—and are capable of flowing 400 cfm at 0.700 in. of lift. These A356 aluminum heads are designed for maximum horsepower and rpm capability, with an average primary operating range of 3,500-8,000 rpm; they also provide impressive torque figures. AFR recommends the use of .120 in. wall pushrods and full-roller rocker arms for strength. It's vital that you check clearance of all moving parts due to the vast array of rocker arms, lifters, cams, springs, etc. Don't forget to check pushrod-to-head clearance, as well as any potential interference from your rocker arms and spring assemblies prior to final engine assembly. AFR 345cc Magnum BBC cylinder heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves.
( 4 )
$3,158.40
—
$4,050.90
Developed and designed in conjunction with 8-time Pro Street World Champion Pat Musi, these Edelbrock Musi/Victor 24 degree CNC-machined cylinder heads are sure to perform at the highest level. They are manufactured from high-quality aluminum and feature CNC-machined combustion chambers, intake runners, and exhaust port runners. They are available in a bare casting or an assembled version. The assembled version includes stainless steel 2.30 in. intake and 1.90 in. exhaust valves, Manley valve springs for a solid roller camshaft, 10 degree titanium retainers and locks, guideplates for 3/8 in. diameter pushrods, and 7/16 in. rocker arm studs. Get maximum horsepower right out of the box with these Edelbrock cylinder heads.
Not Yet Reviewed
$2,122.50
—
$2,999.50
AFR 180cc SBC Eliminator street heads are available in your choice of straight or L98 angle plug versions. These cylinder heads feature a 75cc or 65cc combustion chamber with a 64cc exhaust port and a 3/4 in. thick head deck (ideal for nitrous or blower applications). Standard valves are lightweight, 8mm, and have a 2.020 in. intake and 1.600 in. exhaust with AFR's hardened ductile iron interlocking valve seats. The valve springs included are intended for use on roller camshafts. These heads' exceptional flow characteristics, 23 degree valve angle, and standard valve spacing make them the perfect street heads for 327 to 350 c.i.d. engines in the idle to 5,500 rpm operating range (higher rpm ranges are possible, depending on the combination of parts). Eliminator cylinder heads carry CARB E.O. #D-250-2 when used on 1969-94 applications with the heat riser. They're also available for your 1987 and later engines with centerbolt valve covers and two center intake bolts at 72 degree angles; Vortec-style cylinder heads are available, too. Their dual valve cover bolt pattern is standard and their exhaust port is raised .100 over GM L98 cylinder heads.
( 9 )
$2,052.75
—
$2,328.90
S&S Cycle's 132 in. power packages with gear drive cam are a high performance upgrade for an HD® motorcycle. They significantly increase the displacement of the engine to 132 cubic inches, while utilizing a gear-driven camshaft system. This provides benefits like increased horsepower and torque, improved reliability due to the robust gear drive, smoother power delivery, and a more aggressive engine character compared to a stock setup; all while maintaining compatibility with the existing engine case and allowing for a relatively easy installation process. Many power packages allow for selecting cams with different valve timing profiles to tailor the power characteristics to individual riding preferences. These kits are designed to work with existing engine components, often requiring minimal modifications to install, making them a popular choice for engine upgrades. Order the S&S Cycle kit designed specifically for your HD® model and engine to ensure proper fitment.
Not Yet Reviewed
$3,559.95
S&S Cycle 124 in. power packages with gear drive cam are the ideal combination of performance and savings to transform a Harley-Davidson® motorcycle without breaking the bank. Each kit is tailored with the necessary components for your specific HD® model. These kits offer significant benefits, including a substantial increase in horsepower and torque across the powerband, improved throttle response, better cam timing accuracy due to the gear drive mechanism, and a more reliable valve train compared to a standard chain-driven cam, making it ideal for riders seeking a powerful and responsive engine upgrade, especially on larger displacement bikes like the Milwaukee-Eight models. Installing a 124 in. power package often necessitates additional tuning adjustments, including adjusting fuel delivery and ignition timing to optimize performance. Select the power package with gear drive cam designed specifically for your HD® model and engine to ensure proper fitment.
Not Yet Reviewed
$3,460.95
—
$3,695.95
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 11 )
$2,389.95
ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 1 long block crate engines are classics with great street manners, and vacuum to power all your accessories. These Stage 1 or base engines are designed for those that may have their own component parts already, and who also are interested in completing out the build themselves. Typically ATK GM 350 345 hp base long block engines consist of: * Seasoned OE short block with 4-bolt mains * OE cast crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly piston rings * Hydraulic roller camshaft * 220/224 at .050 in. * .495 in./502 in. lift 110 LSA * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * Valve covers * Timing set and cover * Oil pan, high volume oil pump with pick-up tube
( 12 )
$3,198.99
These Brodix Cylinder Heads Dragon Slayer 23 degree cylinder heads offer exceptional economical out-of-the-box horsepower. They allow the combustion chamber to flow over 300 cfm @ .600 cam lift. The as-cast other ports are built for excellent flow and the 23 degree valve angle allows for standard rocker arms and other bolt-on components to be used. Features include: * 225cc as-cast intake ports * 64 or 68cc CNC-ported combustion chambers * 2.08 intake/1.60 exhaust valves * End-milled and drilled for accessories
( 5 )
$2,193.99
—
$2,771.99
If huge horsepower is what you are searching for, AFR 357cc Magnum aluminum cylinder heads will certainly deliver. With AFR's fully CNC-ported 357cc heads flowing 425 cfm, they represent the ultimate in airflow for your big block Chevrolet. These cylinder heads were targeted at larger cu. in. engines (509-632 c.i.d.) looking for maximum horsepower and rpm capabilities with a primary operating range of 3,500-8,000 rpm (this range is an average and will vary with engine displacement and component selection). These aluminum heads also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports. AFR 357cc Magnum BBC cylinder heads will work best with camshafts exceeding 0.750 in. gross valve lift to make better use of the substantial airflow found in the higher lift range. The AFR 357cc heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The AFR's fully CNC-ported 357 heads come with a 121cc chamber and are available with an optional 114cc combustion chamber as well. Order the cylinder head model suited to your needs.
Not Yet Reviewed
$4,591.65
—
$5,184.90
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
