Free Shipping on Orders Over $125 at Summit Racing

Trail-Gear Rock Assault Fully Built Axle Assemblies

Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges

Not Yet Reviewed

$4,599.99

On Sale

Holley EFI Digital Pro Dash Standalone Kits

Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included

5.0 out of 5 stars ( 3 )

$2,299.95

$2,068.95

Aeromotive Brushless A1000 Fuel Cells with Speed Controller

Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy top-level performance with advanced technology when you order the Aeromotive Brushless A1000 Fuel Cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an A1000 brushless fuel pump, and aircraft-style filler cap * All-aluminum construction and matches design used in Ford Cobra Jet, Chevy COPO Camaro, and many of the MOPAR Drag Pack cars * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional A1000 models and uses a reduced current draw at higher EFI pressures * Outlet ports are female ORB-10 * Return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 900 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 700 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire

Not Yet Reviewed

$2,343.40

—

$2,516.91

Aeromotive 5.0 GPM Brushless Spur Gear Pump Fuel Cells

Aeromotive 5.0 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated 100-micron pre-filter. Order the Aeromotive 5.0 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Triple male wire threaded stud terminals * Not compatible with pulse modulated systems or fuel pump speed controllers

4.0 out of 5 stars ( 2 )

$2,955.03

—

$3,116.49

Aeromotive Eliminator Brushless Fuel Cells with Speed Controller

Aeromotive offers various Eliminator brushless fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy Eliminator performance with advanced technology when you order the Aeromotive Eliminator brushless fuel cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an Eliminator brushless fuel pump, and aircraft-style filler cap * All-aluminum construction * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional Eliminator models and uses a reduced current draw at higher EFI pressures * Outlet and return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 1,300 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 1,000 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire

Not Yet Reviewed

$2,586.62

—

$2,759.05

Aeromotive 3.5 GPM Brushless Spur Gear Pump Fuel Cells

Aeromotive 3.5 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated pickup and 100-micron pre-filter. Order the Aeromotive 3.5 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * All-aluminum construction with a natural finish * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Continuous 90 psi operating pressure and up to 150 psi peak pressure, base plus boost * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Not compatible with pulse modulated systems or fuel pump speed controllers * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * ORB-12 inlet (application specific) * Fixed speed models are ideal for blow-through carbureted racing engines up to 2,000 hp (at the flywheel) * Fixed speed models swappable to True Variable Speed (TVS) with 18047 retrofit kit * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * Triple male wire threaded stud terminals

Not Yet Reviewed

$2,828.24

—

$2,978.68

Aeromotive Brushless A1000 Fuel Cells

Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy top-level performance with advanced technology when you order the Aeromotive Brushless A1000 Fuel Cells best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an A1000 brushless fuel pump, and aircraft-style filler cap * All-aluminum construction with a natural finish * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional A1000 models and uses a reduced current draw at higher EFI pressures * Outlet ports are female ORB-10 * Return ports are female ORB-08 * Roll-over protected -8 AN vent * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 900 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 700 lbs./hr. at 45 psi, 13.5 volts * Threaded male studs/3-wire

5.0 out of 5 stars ( 1 )

$2,228.10

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

ATK High Performance GM 350 Vortec 315 HP Stage 1 Long Block Crate Engines

Give your truck a little more punch with one of these ATK High Performance GM 350 Vortec 315 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.78 out of 5 stars ( 9 )

$2,988.99

ATK High Performance GM 350 330 HP Stage 1 Long Block Crate Engines

Give your ride new life with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 1 long block crate engines. These engines are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, worn down engine or just looking for a little more performance, ATK has you covered. Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * ATK cast iron cylinder heads * 76cc chambers * 165cc intake runners * 1.94 in./1.5 in. valves * Stamped steel 1.5 ratio rocker arms * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Moly rings * Hydraulic flat tappet camshaft * 465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

3.69 out of 5 stars ( 16 )

$3,099.99

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,265.99

ATK High Performance GM 350 330 HP Stage 3 Long Block Crate Engines

Give new life to your ride with ATK High Performance GM 350 330 hp/380 lbs.-ft. Stage 3 long block crate engines. They are based on the tried-and-true small block Chevy and are built to perform right out of the box. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Stage 3 long block crate engines include: * Handpicked, OE remanufactured blocks * ATK cast iron cylinder heads * 76cc combustion chambers * 165cc intake runners * 1.94 in./1.5 in. valves * ATK dual plane Intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic flat-top pistons * Hydraulic flat tappet camshaft * .465 int./.488 exh. cam lift * 224 int./234 exh. cam duration at 0.50 * 9.1:1 compression * Distributor, spark plugs, and plug wires * Valve covers * Timing cover and double roller timing set * Oil pan, pump, and pickup tube * OE style long water pump * Balancer and 168 tooth flexplate

3.63 out of 5 stars ( 8 )

$4,754.99

Summit Racing™ All New 300 HP Small Block Chevy 350 Crate Engines

These Summit Racing™ 350 small block Chevys are 100% new, including their blocks! No remanufactured parts are used to build these engines. They are built with new Vortec head castings that are not prone to cracking like the factory ones, and produce a reliable 300+ horsepower/375+ lbs.-ft. torque, providing a mild muscle car tone. These engines are assembled for us by the guys at ATK, and backed with their 2-year unlimited mile warranty for peace of mind.

Not Yet Reviewed

$4,499.99

B&M Street and Strip Transmissions

B&M remanufactured Street and Strip transmissions are put together with new gaskets, bushings, seals, thrust washers, high performance friction materials, and gold zinc plated hardware. The front pump is rebuilt to B&M specs and the valve body is recalibrated. They're built for extreme conditions and are perfect replacing a worn transmission, cruising, and racing.

3.29 out of 5 stars ( 14 )

$3,849.95

—

$4,150.95

ATK High Performance GM 350 Vortec 350 HP Stage 1 Long Block Crate Engines

Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 1 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. ATK GM 350 Vortec 350 hp Stage 1 long block crate engines include: * Handpicked, remanufactured blocks * Cast iron Vortec cylinder heads * OE crankshaft and connecting rods * Hypereutectic pistons * Hydraulic roller camshaft * Valve covers * Timing cover and timing set * Oil pan, pump, and pickup tube

5.0 out of 5 stars ( 7 )

$3,334.99

TCI Heavy-Duty RV Transmissions

For hauling heavy loads or for taking a trip across the country, TCI heavy-duty RV transmissions were designed with you in mind. They're built for strength, and they'll provide long, dependable service, as well as delivering maximum fuel economy. They have special valve-body modifications that increase fluid flow and improve shift characteristics, without the harsh feel of racing transmissions; and they include a low-gear package for pulling heavy loads.

3.67 out of 5 stars ( 3 )

$2,349.95

—

$3,028.95

TCI Maximizer 4x4 Transmissions

Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.

3.32 out of 5 stars ( 31 )

$2,122.95

—

$4,976.95

Injector Dynamics ID1750x Fuel Injectors

The best just got better! Injector Dynamics ID1750x fuel injectors are a built-to-spec motorsport injector, offering optimization of critical operating parameters important to you, the motorsport tuner. Built on the evolution of the ID1700 and X Series, these fuel injectors are a drastic improvement over previous series from Injector Dynamics. Compared to the 1700, the 1750x offers: higher dynamic flow rate with no increase in minimum fuel mass, better cylinder to cylinder balance at low pulse widths, and improved pressure sensitivity—all while retaining the same "compatible with everything but dirt" corrosion resistance that made the ID1700 famous. Plus, a unique magnetic circuit, resulting from a lengthy development program, makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. Order the set of fuel injectors recommended for your vehicle. Key features and benefits include: * Compact body design allows fitment in a variety of applications * Higher dynamic flow rate with no decrease in minimum fuel mass * Better cylinder to cylinder balance at low pulse widths * Improved pressure sensitivity * Corrosion resistance makes these fuel injectors compatible with Methanol/Ethanol/MTBE/Nitromethane and all known Hydrocarbon fuels * Unique magnetic circuit makes the ID1750x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors * Narrow spray pattern—minimal wall wetting promotes quick response and smooth running * Does not require extended linearity at low flow rates

Not Yet Reviewed

$2,009.70

—

$3,326.40

QA1 1965-79 F-100 Coilover Conversion Systems

QA1 1965-79 F-100 coilover conversion systems are suspension kits built with a purpose—just like your truck! With these all-new, engineered-from-scratch systems, you can stop using junkyard parts to modernize your pickup, and instead bolt in the handling and performance you've always wanted. The front systems are 3.75 in. narrower than a Crown Vic, providing ideal handling and allowing fitment of larger wheels and tires. They also save 150 lbs. of weight and provide 3 in. to 5 in. of drop with standard spindles and 5 in. to 7 in. with drop spindles. QA1 1965-79 F-100 coilover conversion systems are available in single and double adjustable styles with everything you need included, except engine mounts. Included in the systems: * Adjustable shocks * High-travel springs * Coil-over hardware * Upper and lower control arms * Upper and lower crossmembers * Rack and pinion steering * Stock or drop spindles * All required nuts, bolts, etc.

4.38 out of 5 stars ( 8 )

$4,162.95

—

$4,732.95

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 47 )

$2,895.00

MSD Atomic EFI Throttle Body Systems

These MSD Atomic EFI fuel injection systems are the perfect choice for anyone planning on converting from carburetor to fuel injection. They include a throttle body, power module (with wideband oxygen sensor), and handheld controller. The throttle body features an integral ECU built on the side, incorporating the TPS, MAP, IAT, and fuel pressure sensors, all in one location. Fuel delivery is provided by four precision 80 psi injectors featuring a stainless steel ball and seat metering method for maximum internal sealing. They also use internal fuel rails, providing a sleek appearance and removing fitting connections where leaks can develop. Atop the Atomic EFIs are annular booster rings that deliver superior atomization of the best fuel mixture, ensuring the best possible fuel delivery. Best of all, the MSD Atomic EFI fuel injection systems bolt directly to any standard square bore carbureted intake manifold and accept the same linkage as most carburetors. The 1.75 in. diameter throttle inlets ride in precision roller bearings for a smooth pedal transition. The Atomic EFIs' unique TPS is a self-calibrating, non-contact sensor, which means that you don't have to worry about configuring it during setup. The included power module is a remote mounted piece that handles all of the high-current loads. MSD's CAN-Bus technology allows for a single, clean connection between these units and the throttle body mounted ECU. Control all of the MSD Atomic EFI fuel injection systems' functions with the hand-held device. Initial setup takes about five minutes, and you'll answer six questions about your specific engine. After the initial setup is complete, the device can provide you with engine data to help you keep your engine working properly. They also feature a removable micro-SD card to record and store data so that you can see what's going on with your engine.

4.37 out of 5 stars ( 119 )

$2,151.95

On Sale

Holley Terminator X Stealth 4150 2X4 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 2x4 EFI systems feature eight 100 lb./hr. fuel injectors capable of supporting up to 1500 hp naturally aspirated or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower. Features: * Bolt-on 2x4 4150 flange carburetor replacement * Internal 1bar MAP sensor, built into the Terminator X ECU External fuel pressure regulator required, set to a base pressure of 58.5 psi * Integrated ignition timing control * High-resolution, full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard--answer a few questions about your engine, and it creates the base map, then starts tuning on its own without the use of a laptop * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and Fuel Pressure regulator, for years of dependable service * Weld-in oxygen sensor bung for the exhaust ensures a leak-free oxygen sensor install * Plug-and-play with Holley EFI accessories * Available in three finishes: Shiny, Black, and Gold

3.0 out of 5 stars ( 2 )

$3,149.95

$2,833.95

ATK High Performance Chrysler 408 A Stroker Short Blocks

Start your build with a rock-solid bottom-end with these ATK High Performance Chrysler 408 A Stroker short blocks. These short blocks are built using high-quality components that are all hand-fit and balanced to create a reliable bottom-end that's ready to get your musclecar or truck moving. Just top the engine off with your own parts to build a custom engine that is designed to meet your goals. These ATK High Performance Chrysler 408 A Stroker short blocks include the following: * Handpicked and seasoned OE Magnum 1993-2001 blocks * Aligned and hone main bores * Nodular iron internally balanced crankshaft * 4.00 in. stroke * 4340 forged I beam connecting rods with ARP 8740 bolts * Hypereutectic pistons with 23.5cc dish * Plasma-moly rings * Approximate Compression Ratios: 62cc = 9.7:1 / 68cc = 9.2:1 / 72cc = 8.9:1

4.75 out of 5 stars ( 4 )

$2,998.99

FTI Performance Pro Powerglide Level 3 Transmissions

Racing is for pros--FTI Pro Series Powerglides! Their Level 3 units, like all the Pro Series transmissions, house the greatest advances in racing technology. They are fitted with FTI engineered valve bodies and spiral springs--they will not creep when the brake is set. And they are in-house CNC-machined and hand assembled to ensure every clearance is set to exacting tolerances. Level 3 Powerglides are designed and built for racers on a budget that need an unbreakable unit that can handle the rigors of their high performance engine in any extreme environment. Every transmission is dyno-tested to confirm they are race-ready and bulletproof. No wonder they are the choice of champions, shouldn't they be yours, as well? FTI Performance Pro Powerglide Level 3 transmissions feature: * 1.80 straight-cut gear planetary * 300m input shaft * Lightened steel clutch hub * 6-clutch drum * Race-prepped stock case * High-flow pump * Deep aluminum pan * Pro Tree transbrake * Billet dual ring servo * 4340 output shaft * 2-piece shift lever

4.5 out of 5 stars ( 4 )

$2,899.00

—

$3,499.00

295 Results Found For "built"