Free Shipping on Orders Over $125 at Summit Racing

Tremec TKX Manual Transmissions

Specially designed for the aftermarket with universal packaging, the TKX 5-speed RWD manual transmission is a power horse for your Ford or GM restomod project. With superior shifts even at high RPMs, the TKX provides extreme durability, excellent shifting performance and a sleek casing for a customizable fit. Like all TREMEC aftermarket transmissions, the TKX is made from 100% brand-new OEM-quality components. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. * It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety * Slimmest 5-speed on the market for improved tunnel clearance

4.96 out of 5 stars ( 47 )

$2,895.00

Summit Racing™ SPC Engine Blocks

Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included

5.0 out of 5 stars ( 13 )

$2,249.99

—

$3,399.99

Tremec Magnum-F Manual Transmissions

Tremec introduces the Magnum-F 6-speed manual transmissions for fourth-generation Camaros and Firebirds. Designed to replace T-56 transmissions in 1998-2002 GM F-body cars, the Magnum-F leverages Tremec's pervasive TR-6060/Magnum architecture in order to provide fourth-gen enthusiasts significantly improved performance and relief from a shrinking pool of quality T-56 replacement parts. Born in the vacuum created by the release of the original T-56 Magnum (now known simply as 'Magnum') back in 2009, the Magnum-F fills a longstanding void in the overall Magnum line with regard to shifter locations—addressing not only LS1-powered '98-'02 F-bodies, but several other applications that utilize a similar shifter position. Beneficiaries include third-generation F-bodies, LT1-powered fourth-gens, LS-swapped late models of all varieties, and sport compact applications such as A80 Supras, FD RX-7s, and more! Where the original Magnum shifter locations may prove too far forward, and the extended length Magnum XL's too far back, the Magnum-F's in-between position often proves to be just right. Inside, the Magnum-F benefits from the same durable componentry found in many of today's hardest hitting OEM muscle and sports cars. Over the T-56, the Magnum-F transmissions boast increased face-width on all gears, a robust combination of double and triple cone synchronizers, enhanced webbing in the main case, provisions for a cooler circuit, and more! Tremec also took the opportunity to upgrade the shifter to an isolator-type unit, like that found on its Magnum XL. The shifter reduces in-cabin noise and vibrations, while at the same time providing the precise and communicative shift feel that all Magnums are known for. And, like all Tremec aftermarket transmissions, the Magnum-F is made from 100 percent brand-new OEM-quality content. Models with different gear ratios are available. Additional notes: * Close Ratio version for high performance street and road racing * 700 lbs.-ft. of torque capacity * Reasonably light at 135 lbs. dry * Multiple shifter locations and dual speedo pickups for unmatched versatility * Choice of two different gear ratio sets with unique double overdrive ratios * Incredibly short, extremely low-effort shift throws, with crisp, precise engagement * Modern OE supercar technology for the ultimate pro-tourers, road-racers, and more

4.82 out of 5 stars ( 11 )

$3,545.00

Ford Performance Parts WARN Super-Duty Winch Kits

The Ford Performance by WARN Super-Duty winch kit was co-developed by Ford and WARN engineers to create a winch solution for the 2020-22 Super Duty that offers an OEM level of fit, finish, durability, and vehicle integration. These kits include: * Unique WARN 12,000 lb. winch * 70 ft. synthetic winch line * 12,000 lb. Epic winch hook * Ford Performance-branded blue hook strap * Wireless and wired remote controls * Required bracketry and hardware

5.0 out of 5 stars ( 4 )

$2,926.99

Eagle Competition Rotating Assemblies

Eagle competition rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. Depending upon your selection, these kits may feature a crankshaft, pistons, piston rings, rod and main bearings, or connecting rods. Balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.

4.54 out of 5 stars ( 35 )

$2,599.99

—

$3,299.99

On Sale

Summit Racing™ Turbocharger Replacement Kits

Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits

5.0 out of 5 stars ( 2 )

$2,341.92

$2,299.99

Eagle Street and Strip Rotating Assemblies

Eagle Street and Strip rotating assemblies consist of name-brand quality components for a wide range of engines at an affordable price. These kits feature a crankshaft, pistons, piston rings, rod and main bearings, and connecting rods. Based on your application, balanced assemblies are also available. Order the model designed for fitment on your year/make vehicle and engine application.

4.41 out of 5 stars ( 87 )

$2,255.99

—

$2,666.99

Tremec T-56 Magnum Manual Transmissions

Known for robust, superior quality, Tremec T-56 Magnum manual transmissions are brand new from the ground up with a 2.97 first gear. They can withstand up to 700 lbs.-ft. of torque, with gears featuring substantially increased face widths and 2-piece laser-beam welded construction. This allows for greater control of the tooth angles, pitch, and alignment. Additional benefits include: * Bolstered one-piece countershaft to resist distortion * Stronger input shaft * New synchronizers featuring fine-tooth angles * Redesigned shift forks * An extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities

Not Yet Reviewed

$3,545.00

Simpson 6G SFI 20 Suits

The Simpson 6G SFI 20 suits are made with signature knit Nomex, and feature stylish V-quilting, 270-degree arm gussets to lessen weight and restriction, built-in arm restraints, and embroidered DNA epaulets and logos. Style and performance-inspired, these one-piece suits look sharp and have a SFI 20 rating. As the preferred safety brand of championship race teams, you can count on Simpson Racing products and apparel for unparalleled performance and protection. Order the suit size needed. Features of the Simpson 6G SFI 20 suits: * Raschel Knit Nomex durable, lightweight, and flexible * Embroidered logos and designs * 270-degree arm gussets reduce bulkiness and increase ventilation and flexibility * Standard with built-in arm restraints * SFI Certification: SFI 3.2A/20

Not Yet Reviewed

$2,249.95

Borla ATAK Axle-Back Exhaust Systems

Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.

4.61 out of 5 stars ( 157 )

$2,079.99

—

$3,199.99

ATK High Performance Chevy 377 Stroker Short Blocks

Looking to upgrade your old engine using your existing heads? ATK high performance Chevy 377 Stroker short blocks use a 100 percent new American-made cast iron block outfitted with a Scat crank kit. All the hard work is done, you just need to finish it off. These crate engines are available with forged H-beam or I-beam connecting rods; dish top or flat top pistons; forged 4340 steel or nodular iron crankshaft; and other options. Note: Performance short blocks are based on dyno-proven combinations built with name brand parts. Stroker engine built over size of stock stroke. Short block strapped and shipped on wooden pallet crate.

3.0 out of 5 stars ( 1 )

$3,298.99

—

$4,499.99

Simpson 5G SFI 15 Suits

The Simpson 5G SFI 15 suits are made with signature knit Nomex, and feature stylish V-quilting, 270-degree arm gussets to lessen weight and restriction, built-in arm restraints, and embroidered DNA epaulets and logos. Style and performance-inspired, these one-piece suits look sharp and have a SFI 15 rating. As the preferred safety brand of championship race teams, you can count on Simpson Racing products and apparel for unparalleled performance and protection. Order the suit size needed. Features of the Simpson 5G SFI 15 suits: * Raschel Knit Nomex durable, lightweight, and flexible * Embroidered logos and designs * 270-degree arm gussets reduce bulkiness and increase ventilation and flexibility * Standard with built-in arm restraints * SFI Certification: SFI 3.2A/15

Not Yet Reviewed

$2,149.95

Borla S-Type Cat-Back Exhaust Systems

Borla S-type cat-back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower and produce a more aggressive sound and higher flow. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium 300-Series austenitic stainless steel, superior to T-400 Series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. It's just what you'd expect from the world's most experienced (and most winning) exhaust brand.

4.79 out of 5 stars ( 941 )

$2,034.99

—

$4,859.99

Modern Classic Series Accessory Drive Kits

Modern Classic Series accessory drive kits provide the finishing touch to your vintage look LS engine. The kits utilize a spring loaded tensioner and a single six rib serpentine belt to drive all of your accessories. These kits include high-quality, name-brand components, and billet aluminum brackets with a semi-gloss black powdercoated finish. All of the Modern Classic Series kits include a 180 amp Powermaster alternator with internal fan. Kits with power steering feature a GM Type II/TC style power steering pump and an integrated, large capacity, remote, billet aluminum reservoir. Kits are also available with high capacity Sanden 709 air compressor. Modern Classic Series accessory drive kits are available to work with early F-Body/GTO or truck belt lines. Must use an F-body water pump, and the appropriate balancer (not included) with this kit.

5.0 out of 5 stars ( 1 )

$2,328.95

ReadyLift Suspension Terrain Flex Lift Kits

ReadyLift Suspension Terrain Flex lift kits offer Jeep owners performance-minded, capable lift solutions with a taller stance suitable for those larger tires. Moreover, the kits deliver the perfect blend of on-road manners and off-road mastery! The kits feature heavy-duty steel control arms fitted with their proprietary Terrain Control Technology (TCT) maintenance-free, bind-free bushings/flex joints in forged housings. TCT provides greater articulation and range of motion, making them far superior to the factory-bonded bushings that resist suspension flex. And whether your Jeep is a 2007 or a brand new Gladiator, these ReadyLift Terrain Flex kits contain the right mix of components to give your rig the posture, attitude, and performance you are looking for to conquer any landscape successfully. Kit features vary according to application but may include: * SST3000 or Falcon 2.1 Series shocks * Coil springs * Coil spring spacers * Bump stop landings * Bump stop extensions * Shock extensions * Sway bay end links * Rear track bar bracket * Front track bar * All necessary hardware

Not Yet Reviewed

$2,099.95

—

$2,349.95

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$3,933.70

—

$4,980.00

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$3,284.00

—

$4,569.70

EMAX Industrial Silent Air Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial Silent Air piston compressors are quiet. One of the most common complaints about compressors is noise. EMAX Silent Air units not only quiet the noise, they also do it with big cfm output and lower rpm. Featuring their Whisper silent air system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and prefilter media within the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer; plus, it provides secondary filtration for cleaner air. Industrial Silent Air compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Silent Air compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. Their 15 Service Factor means the motors can be pulled 15 percent over full load. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

3.0 out of 5 stars ( 1 )

$2,927.10

—

$4,424.60

HushMat Complete Vehicle Insulation Kits

HushMats complete vehicle insulation kits serve two important functions: reducing thermal transfer into your interior, and reducing the noise level by up to 15 decibels. Your engine, headers, manifold and exhaust generate tremendous heat that transfers to the metal firewall and floor—forcing your A/C system to work harder to maintain a comfortable environment. HushMat auto heat shield is proven to lower this temperature by over 40 percent. At the same time, when you drive on the highway at 65 mph, most vehicles approach 80 to 90 decibels of noise. That's like a vacuum cleaner or garbage disposal running on your passenger seat. These insulation kits use a specially designed sound deadening material to deliver a more peaceful ride. Each kit is packaged specifically for your vehicle to provide 100 percent insulation coverage—no holes in the material and no puzzle pieces to assemble. Treat your firewall, doors, floor, tunnel, rear wheel wells, trunk floor, and roof with these HushMat barriers. Order the complete insulation kit designed for your specific vehicle. Additional details: * Reduces road noise and vibration, low-frequency noise from 0 to 1,000 Hz * Stay warmer in the winter and cooler in the summer; withstands ambient temps from -30 up to +550 degrees F * Lightweight and super flexible mats; less than 1/8 in. thick and 0.47 lbs. per sq. ft. * Adhesion is guaranteed; no alcohol or acetone wash needed; no tools required * Trims easily with standard razor knife or household scissors * Self-adhesive peel-and-stick; no glue required * Outperforms closest competitive brand by over 40 percent * OEM approved; meets or exceeds auto damping specs GMO 149M – General Motors; WSB-M5G58-A1 – Ford; and MS-CD 629 Type C – Chrysler

5.0 out of 5 stars ( 1 )

$2,002.09

—

$2,912.48

ACDelco GM Genuine Parts Disc Brake Rotors

Get the General Motors quality you know and trust with ACDelco GM Genuine Parts brake rotors. By staying with the parts brand your GM vehicle came with, you'll have peace of mind that the fit and performance are up to the original specifications and high standards. These replacement disc brake rotors are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle; order the parts recommended for your application.

4.85 out of 5 stars ( 40 )

$2,050.99

—

$2,271.99

Bell Racing HP10 High Performance Series Helmets

Bell Racing HP10 High Performance Series helmets incorporate the advanced technology of their HP7 state-of-the art advanced helmets in a sleek and modern design that provides the ultimate open-face helmet protection. They feature an ultra-lightweight carbon shell, adjustable carbon fiber peak, brand new adjustable and integrated sunscreen, and a highly comfortable professional fit. HP10s are perfect for racers who want the feeling of an open-face helmet, but demand outstanding comfort and superior performance. Available in several sizes, select your ideal fit. Features: * Ultra-lightweight FIA8860-2018 advanced carbon shell * Advanced multi-density, multi-piece liner -- Maximize energy absorption and impact performance -- High-comfort fire retardant materials * Adjustable carbon sun peak * Adjustable integrated anti-scratch sunscreen -- ML red mirror (M10) fitted as original equipment -- Dark smoked (M10S) supplied in the box * Removable cheek pads with multi-density foam for optimal comfort * Air extraction holes to maximize cooling * Factory installed Hans anchors as original equipment * HP helmet bag included

Not Yet Reviewed

$2,599.95

American Racing Headers GM G-Body Exhaust Systems

American Racing headers answers the call for performance and sound for your G-body with new ultra high quality stainless steel exhaust system. These systems come packed with top tier materials and craftsmanship. These systems feature Pure Thunder series mufflers with rear or side exit exhaust tips. All mounting brackets necessary for install are included. Features: * Direct bolt on to American Racing G-body small block headers * G-body header back systems are easily adaptable to other header brands or your stock manifolds. • G-body big block header back systems only fit with G-Force K-members. Note: All American Racing Headers exhaust systems are for off-road use only.

Not Yet Reviewed

$2,419.52

Aeromotive Diesel Lift Pump Kits

Now you can get more performance from your diesel with Aeromotive diesel lift pump kits! They're built with features you'll appreciate, such as: Precise pressure control via the Aeromotive convoluted diaphragm regulator; a fuel pressure gauge for accurate system pressure monitoring; a built-in check valve to keep the system primed; a submersible motor design with no dynamic shaft seals to erode; and a CAT 2-micron fuel filter. Duramax kits include a "fail safe" valve. In the event of failure or a no-run condition, the valve opens and allows fuel to bypass the pump—so the engine continues to run and you can get to your destination, eliminating tow bills. Order the model recommended for your application. Additional features include: * Unique draw-through technology * 3/4 in. in tank pickup tube * 100 micron in-tank filter * In-tank baffle included, eliminating 1/4 tank issue * Quick-disconnect fittings for all fuel lines * 1 in.-14 fuel filter thread allows the use of other common filter brands * Stainless steel filter stud and filter dip tube (corrosion-resistant) * Flow-through design; no shaft seal to fail or leak * Wiring harness with Delphi sealed Weatherpack connectors (vehicle-specific pumps only) * Self-priming, no need to pre-fill the filter during install or filter swap * Available with your choice of gph ratings * OEM-style return; no need to modify the filler neck

Not Yet Reviewed

$2,412.59

—

$2,482.29

Dinan Valved Exhaust Systems

Dinan valved exhaust systems are available in cat-back and rear axle back options for a variety of Toyota applications. These exhausts convey the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan; in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, Dinan exhaust systems are a straightforward install with precision fitment, just like you'd expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100 percent T304 stainless steel, TIG-welded and free of hydroformed pipe, each upgraded system is a marked improvement from its predecessor—both in terms of material/construction and overall looks. For weight savings and simplicity, the stock single-to-dual pipe setup has been abandoned in favor of an enlarged, free-flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3mm (4.5 in.) exhaust tips emblazoned with the laser-engraved Dinan logo. The tip branding further cements any lingering doubt that the system visible is something above and beyond stock. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes, making the vehicle a delight to drive and enjoy. However, for those who want options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons), factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open—and emit more subdued resonant vocals when the valve is closed; and exhaust gases are wholly redirected through the muffler. It's the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, Dinan valved exhaust systems are the answer for discerning enthusiasts looking for sound without sacrifice. Additional product features: * Maximum gains of +6 HP and +5 lbs.-ft. of torque * Enjoyably louder, sportier sound * Drone abatement technologies used to reduce cabin resonance * Dual 4.5 in. (114.3mm) double-walled clamp-on tips with laser-engraved Dinan logo * Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) * 100 percent 304 stainless steel construction * Retains factory valve control * Factory-like fitment with included mounting hardware * Tips available with polished or black ceramic coated finish

Not Yet Reviewed

$2,254.95

32 Results Found For "brand"