Free Shipping on Orders Over $125 at Summit Racing

QA1 1963-87 C10 Front Coilover Conversion Systems

QA1 1963-87 C10 front coilover conversion systems are a great upgrade to your C10 front suspension. Each kit comes with QA1's proven single or double adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C10 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability; they're topped off with performance ball joints and low-friction, maintenance-free bushings. These kits will add up to 7 degrees of caster for more stability, and allow for optimum camber adjustment in a lowered truck. For those on a budget, QA1 also offers kits without the upper control arm—which will add 3-4 degrees of caster, while still providing ride height adjustability with coilover shocks. Order the model designed for your vehicle application.

4.86 out of 5 stars ( 28 )

$2,015.95

—

$2,728.95

QA1 1988-98 C1500 Level 2 Front Coilover Conversion Systems

QA1 1988-98 C1500 level 2 front coilover conversion systems are a great upgrade to your C1500 front suspension. Each kit comes with QA1's proven single adjustable Pro Coil coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. The shocks allow for wider wheel and tire combos, ride height adjustability, and are 100 percent dyno-tested and serialized. The QA1 C1500 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability. The kit will provide a total of 4 in. of drop when used with drop spindles, or 2 in. of drop with factory spindles. Performance ball joints and low-friction, maintenance-free bushings are standard. Level 2 easy bolt-on kits will add more stability and allow for optimum camber adjustment in a lowered truck. Everything you need is included, all the way down to the hardware; no welding required.

4.71 out of 5 stars ( 7 )

$2,219.95

QA1 1988-98 C1500 Level 3 Front Coilover Conversion Systems

QA1 1988-98 C1500 level 3 front coilover conversion systems are a great upgrade to your C1500 front suspension. Each kit comes with QA1's proven double-adjustable Pro Coil coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. The shocks allow for wider wheel and tire combos, ride height adjustability, and are 100 percent dyno-tested and serialized. The QA1 C1500 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability. The bolt-in upper control arm mount provides enhanced suspension geometry, which reduces anti-dive and ties in the upper shock mount. The kit will provide a total of 6 in. of drop when used with drop spindles, or 4 in. of drop with factory spindles. Performance ball joints and low-friction, maintenance-free bushings are standard. This easy bolt-in kit will add more stability and allows for optimum camber adjustment in a lowered truck. Everything you need is included, all the way down to the hardware; no welding is required.

5.0 out of 5 stars ( 4 )

$2,797.95

QA1 1967-91 C20/R20 Front Coilover Conversion Systems

Now you can easily give your C20 or R20 truck adjustable ride height, adjustable shock valving and improved geometry with QA1's 1967-1991 C20/R20 front coilover conversion systems. Each kit comes with QA1's proven single or double adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 upper and lower control arms are manufactured from steel tubing for increased strength and powdercoated for long-lasting durability; topped off with performance ball joints and low-friction, maintenance-free bushings. You can easily install the kit in your driveway or garage using basic hand tools. No welding required. Everything is included, all the way down to the hardware. Select the QA1 C20/R20 coilover conversion system for your application needs. Features of 1967-1991 C20/R20 front coilover conversion systems: * Kits are available with single or double adjustable coilover shocks (please specify kit needed when ordering) * Adjustable ride height with up to 1 in. to 3 in. of drop and up to 6 in. with aftermarket spindles * Retains 8-bolt wheels * Improves ride and handling * Single-adjustable shocks with 18 clicks of valving adjustment gives you a very simple way to adjust your shocks without taking them off the truck—you can simply soften or stiffen the ride by turning one knob * Double-adjustable shocks with 18 clicks of independent compression and rebound valving adjustment are great if you really want to fine-tune your shocks on the street or plan to track your truck * No welding required Fitment Notes: Total amount of ride height drop depends on wheel and tire fitment. Requires spindles that use 1971-1986 C20 ball joints.

Not Yet Reviewed

$2,802.95

—

$3,022.95

QA1 1999-06 Silverado/Sierra 1500 Front Coilover Conversion Systems

Upgrade the front suspension of your NBS truck with QA1 1999-06 Silverado/Sierra 1500 front coilover conversion systems. These kits match tubular upper and lower control arms with QA1's single or double adjustable coilovers to deliver the perfect stance, along with improved geometry and ride quality. They are easy to adjust on the vehicle and deliver a noticeable improvement in both comfort and control. Select either the single or double adjustable kit for your truck. Features: * QA1 front coilovers give you 1 to 3 in. of ride height adjustability right out of the box. (To go lower, pair them with QA1's 2 in. drop spindles for a total drop range of 3 to 5 in. up front, sold separately). * QA1 upper and lower tubular control arms are built to improve suspension geometry and increase strength over stock. They offer more clearance for coilovers, reduce deflection under load, and help maintain proper alignment. * QA1 single adjustable coilovers offer 18 clicks of combined compression and rebound adjustment. * QA1 double adjustable coilovers offer18 clicks of independent compression and rebound adjustment * Bolt-on design using standard tools--no welding required * Pre-installed ball joints and bushings save you time * Spanner wrench and thrust bearing included

Not Yet Reviewed

$2,399.95

—

$2,599.95

QA1 1961-71 D100 Independent Front Suspensions

QA1 1961-71 D100 independent front suspensions update your classic 2WD Dodge truck with coilover shocks and rack-and-pinion steering. The IFS kits instantly transforming the old-school feel of leaf springs and a straight axle to greatly enhanced truck performance with late-model drivability and the perfect lowered stance. QA1 coilovers make it easy to achieve the ideal look while tuning ride characteristics to meet your unique needs. Choose from kits that offer 3 to 4 in. of drop or 5 to 6 in. of drop to lower the front of your truck while gaining much better geometry. You also have the choice of single or double-adjustable coilovers. Kits come complete with everything you need to bolt in the system. Contents and features of QA1 D100 IFS kits: * Front crossmember * Tubular control arms * Steering rack * Spindles * Ball joints * Inner/outer tie rods * All necessary installation hardware * The kits can be bolted in with simple hand tools without any cutting, welding, or the use of a lift, and can be completed without removing the inner fender aprons * Single-adjustable shocks are recommended for trucks that will be used primarily on the street * Double-adjustable coilovers are recommended for trucks that will consistently be used for drag racing, autocross, or road racing

Not Yet Reviewed

$4,176.95

—

$4,470.95

QA1 1963-72 C10 Coilover Conversion Systems

Upgrade your classic truck to a modern driving feel and performance with QA1's 1963-1972 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while reducing weight 140 lbs. over stock. Order the QA1 1963-72 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Adjustable Shock Valving: Double-adjustable shocks offer independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 5 )

$4,450.95

—

$4,650.95

QA1 1973-87 C10 Coilover Conversion Systems

Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 1 )

$4,450.95

—

$4,650.95

Ridetech Streetgrip Suspension Systems

What are some of the virtues of a quality Ridetech Streetgrip suspension system? For starters, they're easy to install. The Delrin bushings eliminate deflection, and dual-rate springs allow the vehicle to transition small road irregularities via a compliant spring rate. Adjustable monotube shocks deliver premium ride quality and handling performance, while the tall upper ball joints reposition the control arms to correct camber for more stability. Sway bar end links are also included to minimize body roll through corners. Give your vehicle the components it needs to handle the road with a Streetgrip suspension system—Ridetech's one-box solution for better ride and control. Order the model designed for fitment on your vehicle.

5.0 out of 5 stars ( 1 )

$2,165.00

—

$3,985.00

UMI Performance Stage 5 Front Suspension Packages

UMI Performance Stage 5 front suspension packages provide a solid foundation for your strip car with occasional street duty. UMI's dual tube K-member is known as the strongest in its class—and can withstand wheel stand landings and street abuse while still shaving weight, as well as protecting the oil pan. The rod end upper and lower A-arms reduce friction and unsprung weight while ensuring super-quick weight transfer. These K-members and A-arms are built from strong DOM tubing, precision-bent, CNC-notched and welded in a jig to form a solid base. Upper and lower A-arms are assembled with PTFE-lined race quality rod ends and premium ball joints. The included adjustable A-arms offer strength, weight reduction, reduced friction, and alignment adjustments when needed. Increased caster for straight-line stability can be achieved very easily with this bolt-in system. Stage 5 includes Viking A226 bearing-mounted front coilovers with double adjustable shocks that allow ride height, compression, and rebound adjustment. The A226s feature bearing ends in place of polyurethane for friction reduction, improved response, and longer lasting performance. Ride height adjustment is accomplished with the included spanner wrenches and thrust washers; while the compression and rebound adjusters are clicked by hand—and feature a total of 361 possible valving combinations. The included springs are 300 lbs./in. and work perfectly on drag race applications and vehicles with front-end weight reduction. The UMI Performance Stage 5 front suspension package is found under many F-body drag cars with single-digit ETs. Package features include: * Heavy-duty D-member with dual tube construction * Tubular upper and lower A-arms with race-quality rod ends * Wide flanged aluminum step bushings in A-arms * Premium upper and lower ball joints installed * Double adjustable race-style bearing end Viking shocks * Height adjustment from 0 to 3 in. lowering * 300 lbs./in. front springs for drag racing * 43 lbs. of front-end weight savings * Chromoly A-arms save an additional 1.5 lbs. * Works with factory steering rack * Direct bolt-in replacement, no welding

5.0 out of 5 stars ( 2 )

$2,749.99

Tuff Country EZ-Ride Suspension Lift Kits

Tuff Country EZ-Ride suspension lift kits increase fender clearance and allow for larger tires, while their EZ-Ride technology maintains a great ride. All Tuff Country EZ-Ride lift kits are of the finest quality and are engineered for simple installation at an affordable price. Most kits bolt-on, require no cutting or drilling, and are available for a wide range of vehicles in a choice of lift heights. New shocks are not required on most installations. Features of Tuff Country EZ-Ride suspension lift kits, depending on the application, may include: * Spacers mounted above the OEM coil springs/struts * Rear add-a-leafs added to the existing leaf springs * Rear cast iron lift blocks mounted below the OE leaf springs * Re-indexed factory torsion bars--without "cranking up" * Control arms that retain proper suspension geometry * Control arms with PTFE-lined FK Uni-ball joints * Dropped pitman arm and/or track bar relocating bracket(s) for proper alignment * Extended radius arms to improve articulation * Replacement radius arms that eliminate the need to drop radius arms--with no loss of ground clearance * Axle pivot brackets with camber adjustment * Transfer case drop kit * Polyurethane spring bushings * PTFE pads in leaf springs to eliminate squeaking * Tapered, snub-rolled, and pre-set leaf springs * Application-specific hardware and U-bolts

4.1 out of 5 stars ( 72 )

$2,001.96

—

$2,658.94

Ridetech 1965-79 F-100/F-150 IFS Suspension Systems

Ridetech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with Ridetech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck

Not Yet Reviewed

$3,995.00

Rock Jock High Steer Knuckle Kits

Rock Jock High Steer Knuckle Kits for all Jeep JL and JT models is a game changer, packed with features that improve the off-road capabilities, as well as the on-road drivability of your vehicle! Intended for use on factory axles, these kits replace the inferior factory aluminum knuckles with cast iron high steer knuckles that exceed OEM quality and strength. They raise the tie rod 2 3/4 in. and the drag link 2 1/2 in., moving the rods out of the way of rocks and helping to restore factory steering geometry for improved drivability and overall road comfort on a lifted Jeep. The new knuckles also feature two adjustable steering stop locations for full lock-to-lock adjustability which helps ease the strain on steering components at full lock. Stock ball joints, unit bearings, axles, brakes and dust shields are all retained. Rock Jock's Currectlync steering included in these kits features revolutionary high articulation forged chromoly drag link that incorporates a unique organic shape with many compound curves—which can only be achieved via forging, resulting in maximum up-travel capabilities. The tie rod is a 42mm (1 5/8 in.) diameter chromoly tube. All Currectlync steering ends are forged steel and comparable in size to those found on modern 1-ton trucks. Given the dramatic geometry changes vehicle lifts impose, the kits include a trac bar geometry relocation bracket with a fully integrated: a) steering stabilizer shock mount, OR b) ram assist steering mount (depending on the kit you order). The trac bar mounting point is raised 2 1/2 in., to correct geometry, preventing any bump steer. * a) The steering stabilizer shock mounting point portion of the bracket moves the shock up and behind the new tie rod location, far from its vulnerable stock location. OR.... * b) The ram assist mount portion of the bracket provides an easy bolt-up anchor point for your hydraulic assist ram, as well as a lower skid plate, incorporated into the bracket, to protect the ram from rocks. Kits Include: * Left side high steer steering knuckle * Right side high steer steering knuckle * Currectlync Drag Link * Currectlync Tie Rod * Trac bar relocation and ram mount axle bracket -OR- Trac bar relocation and stabilizer shock mount axle bracket (depending on kit) * Stabilizer shock tie rod clamp -OR- Ram assist tie rod clamp (depending on kit chosen)

Not Yet Reviewed

$2,017.00

—

$2,235.56

UMI Performance Corner Max Kits

UMI's Corner Max front-end kits are a comprehensive system with UMI's best corner carving parts. They combine geometry corrected A-arms with tall ball joints, higher rate springs, UMI rebound adjustable monotube shocks, heavy-duty sway bar and a bump steer kit. These Corner Max kits are built to make the stock GM clip work as well as it possibly can with a true bolt-on kit. Additional Corner Max kit features: * Exceptional handling at 0-2 in. lowering * Designed to work with factory spindles * Up to 10 degrees static caster without moving the spindle pin * Up to 1.2 degrees per inch camber gain * 1 1/2 in. tall lower and 0.9 in. tall upper ball joints * Easily change shocks and springs at the track with UMI's unique quick-change system * 850 lb./in. race-proven spring rates for exceptional handling * UMI rebound adjustable monotube shock with road race valving, 40 clicks of adjustment * Shocks have easy access adjustment in engine bay area for quick changes at the track * 1 5/16 in. solid sway bar with swivel end links to balance kit properly * Bump steer kit for fine tuning * Thrust bearings and adjusting wrench included for easy height changes * Raced and tested on UMI's 1972 LeMans test car

4.0 out of 5 stars ( 2 )

$2,948.99

—

$3,449.99

Clearance

Scott's Hot Rods IFS Packages

Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options

5.0 out of 5 stars ( 4 )

$4,363.99

$3,372.50

Ridetech 2019-25 Silverado/Sierra 1500 Group B Suspension Lowering Kits

Ridetech 2019-25 Silverado/Sierra 1500 suspension lowering kits will turn your vehicle into a high performance muscle truck with a better stance, handling, and ride quality. Offered for 2WD and 4WD drivetrains and with Group B axle flip bracket, Ridetech lowering kits are 100 percent bolt-on and fully adjustable. Each kit includes front HQ Series coilovers, tubular upper control arms, rear HQ Series shocks, shock angle correction brackets, flip brackets, adjustable shackles, and heavy-duty hangers. Choose the proper kit for your truck. Component features and benefits: * Front HQ Series coilovers allow for a 1 to 3 in. lowered stance (2 in. optimal) and are a direct replacement for factory shock and spring. They utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling via the rebound adjustment knob with 24 positions of adjustment. Premium Hyperco springs are used that are CNC cold-wound with high-tensile steel. * Upper Strongarms correct the camber and ball joint angles to allow proper wheel alignment. They are fully assembled with ball joints and bushings and are powdercoated satin black. * Rear HQ Series shocks are also rebound adjustable and include brackets to correct the shock angle at the lowered stance more maximum effectiveness. * The rear 4 in. lowering kit includes axle flip brackets (Group B axle type), stout front leaf spring hangers, and adjustable shackles to fine-tune the stance. * Group B axle housing for: -- 12-bolt 9.76 in. axle (steel) has 12 cover bolts, magnetic differential housing -- 12-bolt AAM 9.50 in. axle (aluminum) has 12 cover bolts, non-magnetic differential housing * Optional components are available separately to help eliminate wheel hop, provide extra load capacity, and improve cornering.

Not Yet Reviewed

$3,315.00

Ridetech 2019-25 Silverado/Sierra 1500 Group A Suspension Lowering Kits

Ridetech 2019-25 Silverado/Sierra 1500 suspension lowering kits will turn your vehicle into a high performance muscle truck with a better stance, handling, and ride quality. Offered for 2WD and 4WD drivetrains and with Group A axle flip bracket, Ridetech lowering kits are 100 percent bolt-on and fully adjustable. Each kit includes front HQ Series coilovers, tubular upper control arms, rear HQ Series shocks, shock angle correction brackets, flip brackets, adjustable shackles, and heavy-duty hangers. Choose the proper kit for your truck. Component features and benefits: * Front HQ Series coilovers allow for a 1 to 3 in. lowered stance (2 in. optimal) and are a direct replacement for factory shock and spring. They utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling via the rebound adjustment knob with 24 positions of adjustment. Premium Hyperco springs are used that are CNC cold-wound with high-tensile steel. * Upper Strongarms correct the camber and ball joint angles to allow proper wheel alignment. They are fully assembled with ball joints and bushings and are powdercoated satin black. * Rear HQ Series shocks are also rebound adjustable and include brackets to correct the shock angle at the lowered stance more maximum effectiveness. * The rear 4 in. lowering kit includes axle flip brackets (Group A axle type), stout front leaf spring hangers, and adjustable shackles to fine-tune the stance. * Group A axle housing types: -- 10-bolt axle (found on early W/T) has 10 cover bolts -- 12-bolt GM 9.50 in. axle (aluminum) has 12 cover bolts, non-magnetic differential housing * Optional components are available separately to help eliminate wheel hop, provide extra load capacity, and improve cornering.

Not Yet Reviewed

$3,315.00

UMI Performance Stage 3 Handling Kits

UMI Performance Stage 3 handling kits are designed to help you achieve a high level of performance pro-touring handling capabilities, while not compromising the comfort of your everyday commute. They deliver precision steering, as well as excellent handling and balance, with superior-quality parts components you won't find in other handling kits. Kits include the following features: * Increased spindle height by 1/2 in. via tall upper ball joints for improved camber gain and a better contact patch. Works nicely in conjunction with lowering springs * Upper A-arms add caster for improved steering feel and straight line stability * Lower A-arms feature UMI-built Delrin bushings and accept standard springs or coilovers * 1.25 in. front sway bar for flat cornering, CNC-bent from 4140 balanced with 1 in. solid heat-formed rear sway bar * Shocks feature monotube construction and are designed and tuned for optimum ride quality, combined with responsive handling * UMI springs feature ultra premium CrSi material with linear rates front and rear for consistent handling * Rear trailing arms feature poly and roto-joints, as well as adjustable uppers for setting pinion angle and rear lateral location * Roto-Joints allow for smooth articulation for improved handling and less bind

5.0 out of 5 stars ( 1 )

$3,369.99

—

$3,628.99

Icon Vehicle Dynamics 2.5 VS CDCV/UCA Shock Systems

Icon's GM 2500HD/3500HD upper control arms are packaged with their shock absorbers as a complete system, ensuring compatibility and performance. Icon Vehicle Dynamics 2.5 VS/UCA shock systems contain shocks configured specifically for each application in both length and damping tune for outstanding performance off-road and a smooth ride on the street, along with Icon's Delta Joint tubular or billet control arm kits. Icon's 2.5 VS CDCV shock systems offer Compression Damping Control Valve (CDCV) RR (remote reservoir) shocks with an externally adjustable valve that restricts oil flow into the reservoir, creating 10 levels of compression damping force ranges. The remote reservoir design improves heat dissipation to reduce shock-fade during prolonged use. And of course, they are 100 percent rebuildable and revalvable. Icon's Delta Joint upper control arm kits provide the advantage of increased wheel travel, when paired with the shocks. The patented Delta Joint is a heavy-duty high-angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. They feature a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal-on-metal construction and a greaseable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. Choose the shock system designed for your GM HD truck.

Not Yet Reviewed

$2,329.95

UMI Performance Stage 5 Handling Kits

UMI Performance Stage 5 handling kits include all of UMI's high-end Pro-Touring products and will turn your A-body into a corner carving machine. Up front, the kits start with UMI's awesome 4056-3 adjustable A-arm loaded with a 0.9 in. taller ball joint. This arm increases caster to around 6 degrees and allows road race camber settings with no shims. The lower A-arms are loaded with UMI-built Delrin© bushings for smooth motion and precise steering; as well as 0.5 in. tall lower ball joints to further increase spindle height and get rid of the factory bump steer. The 1.4 in. of additional spindle height transforms the A-body camber curve into something race-worthy. Viking's front hybrid coilovers with double adjustable shocks allow ride height, compression, and rebound adjustment. The ride height adjustment is accomplished with the included spanner wrenches and thrust washers. The compression and rebound adjusters are clicked by hand (no tools!) and feature a total of 361 possible valving combinations. These bolt-on handling kits are available for a wide range of applications, including many Pontiac, Oldsmobile, Chevrolet, Buick, and GMC vehicles from the 1960s and '70s.

Not Yet Reviewed

$4,799.99

QA1 1965-79 F-100 Coilover Conversion Systems

QA1 1965-79 F-100 coilover conversion systems are suspension kits built with a purpose—just like your truck! With these all-new, engineered-from-scratch systems, you can stop using junkyard parts to modernize your pickup, and instead bolt in the handling and performance you've always wanted. The front systems are 3.75 in. narrower than a Crown Vic, providing ideal handling and allowing fitment of larger wheels and tires. They also save 150 lbs. of weight and provide 3 in. to 5 in. of drop with standard spindles and 5 in. to 7 in. with drop spindles. QA1 1965-79 F-100 coilover conversion systems are available in single and double adjustable styles with everything you need included, except engine mounts. Included in the systems: * Adjustable shocks * High-travel springs * Coil-over hardware * Upper and lower control arms * Upper and lower crossmembers * Rack and pinion steering * Stock or drop spindles * All required nuts, bolts, etc.

4.38 out of 5 stars ( 8 )

$4,162.95

—

$4,732.95

Rough Country M1R Suspension Lift Kits

The Ford Bronco is back and better than ever! Rough Country has hit the ground running to give your 2021-up Bronco an improved, aggressive stance with a 3.5 in. lift kit! These M1R suspension kits provide everything needed to lift your vehicle, giving you increased ground clearance to run larger tires while reducing the nose-down factory look for a commanding presence. Kits combine the use of aluminum upper control arms and differential spacers to reduce CV angles and ball joint angles. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of each suspension kit included is a rear track bar and brake line relocation that allows you to retain factory-like geometry. This combined setup provides enough clearance to run 35 in. tires without additional modifications. With minor cutting and strut compressor required to install, this full kit can be installed at home in an estimated time-frame of 3-5 hours. Additional details: * Aluminum control arms * Greaseable high-angle ball joints * Easy bolt-on installation * Maintains factory ride quality * Increased ground clearance * Upper control arms improve ball joint angle and correct suspension geometry

Not Yet Reviewed

$2,049.95

—

$2,549.95

Helix CornerKiller IFS Suspension Packages

Helix CornerKiller IFS front suspension will revolutionize your suspension and give your car or truck the ride and handling it deserves. Each front suspension is specially designed to give your classic ride modern handling and stopping power by updating all of the critical parts. Helix starts with precision-made components that are designed to work together. Tubular control arms provide the adjustability you need to setup the suspension for your car, while your choice of standard to 2 in. drop spindles help you customize the stance. Topping off the spindles is a set of 11 in. disc brakes to provide extra stopping power. Rack and pinion steering is provided by either power assist or manual racks. Finally choose between coilovers for maximum handling and a static stance or air struts for the ultimate in ride height control and ride quality. Bring your classic ride into modern days with a Helix CornerKiller IFS front suspension package.

4.0 out of 5 stars ( 2 )

$3,399.95

—

$4,299.95

Rough Country Vertex/V2 Suspension Lift Kits

Rough Country Vertex coilover/V2 shocks suspension kits lift and level your vehicle, giving it some serious attitude, a smooth ride, and unmatched highway and trail performance. The kits contain different components matched to your vehicle application, but they all offer increased ground clearance and feature V2 monotube shocks and Vertex coilovers. Choose the kit designed for your vehicle. Vertex/V2 features: * V2 monotube shocks: -- Monotube design -- Internal floating piston -- Nitrogen-charged -- 46mm high-flow piston -- Fast heat dissipation -- 36kN tensile strength -- Mounts inverted -- 6061 T-6 brushed aluminum body -- 3-year Manufacturer's Warranty * Vertex coilovers: -- 8-stage adjustable damping -- Monotube design -- Nitrogen-charged -- Massive 2.5 in. piston -- 22mm chrome-hardened piston rod -- 3-Stage Seal System -- Heat-treated alloy bearing -- Honed steel body -- 3-year Manufacturer's Warranty

Not Yet Reviewed

$2,009.95

—

$2,059.95

27 Results Found For "adjustable ball joints"