Free Shipping on Orders Over $125 at Summit Racing

ididit Universal Tilt and Telescoping Column Shift Steering Columns

Universal tilt and telescoping column shift steering columns from ididit are unique in that they not only tilt, but they also telescope 1 1/2 in. toward the driver. These columns are available in different finishes and lengths to fit your specific needs.

4.5 out of 5 stars ( 2 )

$2,074.00

Flaming River Microsteer Electric Power Assisted Steering Kits

Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts

3.67 out of 5 stars ( 3 )

$2,189.99

—

$2,589.99

OTC Truck Dual Wheel Dollies

OTC truck dual wheel dollies remove, transport, and replace dual wheel and tire assemblies without strain or struggle. Features: * 1,500 lb. capacity * Swivel casters, 3 1/2 in. front and 3 in. rear, provide easy maneuverability * Floor space is 43 in. by 42 in. * Hydraulic jack provides over 6 1/2 in. of lift and tilts wheel assembly 7 degrees to prevent damage to wheel seal * 6 ft. support chain to hold load in place

Not Yet Reviewed

$2,082.99

Ranger R76LT Tire Changers

If your general repair shop is looking for a swift tire changer that is fast, safe, and easy to use, the Ranger R80EX is the equipment your shop needs. The Ranger R76LT eliminates some of the add-ons that are specifically made to assist operators with tricky run-flats, low-profile tires, and particularly stubborn beads. Most passenger vehicle and pick-up tires don't have those problems, so this machine's tilt-back design simply offers what you want, and nothing more. The professional-grade R76LT features a large turntable that provides an internal clamping capacity of 30 in. and an external clamping capacity of 26 inches. A sturdy body, rigid 45mm hexagonal vertical shaft and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the likelihood of expensive wheels getting damaged. Bead seating and tire inflation is simple and effortless with Ranger's exclusive TurboBlast portable bead seating system. For ease of use, ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending. Key features and specs: * 3 hp (220 VAC 50-60 Hz) motor * Advanced drive belt system—spreads wear evenly throughout the machine, so belt functionality is not weakened over time, and the entire system is protected by the tire changer chassis * (4) clamps (internal/external) * Dual pneumatic cylinders prevent the equipment from vibrating too much, less movement means less friction— cushions are installed to soften the end of each stroke, preserving the seals, wear bands and piston rods so the whole design is self-lubricating and easy to maintain * Adjustable pneumatic blade * Tilt-Back Tower design * Vertical shaft/Tool head positioning * Inflation system/Inflation gauge and integrated air dump valve * Inflation pressure regulator/limiter * Water Filter * Oiler/Lubricator * Air regulator * Bead tool/Tire iron * Multi-functional alloy-steel mount-demount head—makes it easy to switch between functions without making adjustments. The tool head is gentle on tire beads when removing and replacing tires * Durable nylon mount-demount head is exceptionally good at protecting alloy rims and custom wheels * Large Soap Bucket/Soap brush * Powerful, TurboBlast bead seating system * Tool tray/Bin storage * Motorcycle turntable clamps (optional)

Not Yet Reviewed

$3,586.99

Powermatic 8 in. Jointers

The Powermatic 8 in. Jointers meet the demands for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73 in. long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The 8 in. jointers are available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base. Choose the jointer model you need. Highlights and features: * Motor (TEFC): 2HP/1PH/230 V * Extra-long tables are mounted on dovetailed ways, for extended workpiece support * Available with 54 four-sided carbide inserts on the helical cutterhead or a 3-blade, high-speed steel straight knife cutterhead * High mount switch for operator convenience * Handwheel operated worm gear system for smooth fence tilting * Large extension rest on infeed table for rabbiting (model 60C only) * Magnetic push blocks can be stored on the machine within constant reach * Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth * Fence Tilt: 45 degree forward/backward * Fence Positive Stops (degree): 45, 90, and -45 degree * Cutterhead Speed: 7,000 rpm * Dust Port Diameter: 4 in. * Maximum Width Cutting: 8 in. * Maximum Depth Cutting Capacity: 1/2 in.

Not Yet Reviewed

$3,519.00

TMI Sport Series Pro-Split Back Bench Seats

TMI Sport Series Pro-Split Back bench seats are built with all-metal frames, high-density foam padding, marine-grade vinyl covers, and contrast stitching in one of six colors. Creature comforts include side and thigh bolsters, along with full tilting driver and passenger backs. For greater comfort, looks, and safety, replace your vehicle's aging seats with a TMI Sport Series Pro-Split Back bench seat.

5.0 out of 5 stars ( 10 )

$2,056.00

—

$3,448.81

Flaming River 1970-81 Camaro Manual Rack and Pinion Cradle Kits

Convert your steering box application to Flaming River 1970-81 Camaro manual rack and pinion steering--without modifications! Their cradle kits offer a lighter, more responsive steering system for your classic ride. These unique Flaming River cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes! With your kit, you'll receive universal joints, a shaft support bearing, a mounting clamp, hardware, a billet swivel floor mount, and, of course, their patented rack and pinion cradle system. Kits are available with or without tilt key columns. Update your classic to enjoyable driving with Flaming River 1970-81 Camaro manual rack and pinion cradle kits.

Not Yet Reviewed

$2,158.99

Flaming River 1970-81 Camaro Power Rack and Pinion Cradle Kits

Swap your steering box setup for a lighter, more responsive modern steering system in your classic. Flaming River 1970-81 Camaro power rack and pinion cradle kits utilize your Camaro's original inner and outer tie rod ends, maintaining the original pivot position and making installation easier. No cutting, welding, or drilling to the chassis is required--simply bolt the cradle into the existing steering box holes. The kits include your choice of tilt key columns or no-column, a stronger 1 in. rack gear, a billet-joint and column adapter, mounting hardware, a polished aluminum mounting reservoir, and a power steering pump and pulley. All included to allow you more than 6 in. of travel and a full turning radius. Enjoy driving your classic car with this upgrade-- Flaming River 1970-81 Camaro power rack and pinion cradle kits.

3.5 out of 5 stars ( 2 )

$2,676.99

Powermatic 31A Belt/Disc Sanders

Loaded with features, the Powermatic 31A belt/disc sanders can tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the integral dual dust port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6 in. x 48 in. belt sander head can be used vertically, horizontally, or angled to accommodate most any job. The belt head has an indexing pin with stops at 0, 45 and 90 degrees and the head lock allows use at any angle in between. Removing the top guard facilitates contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle. Offered in several models, order the one suited to your needs. Powermatic 31A belt/disc sander features: * Multi-position belt head locks at any angle from 0 to 90 degrees and includes indexing pin for 0, 45 degree, and 90 degree stops * Belt and disc tables are precision ground cast iron with miter slots * Belt table tilts down to 45 degrees, and can be set for beveled and mitered angle sanding * Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support * 12 in. disc is balanced for flat, even coverage * 460 V operation requires an additional 460 V magnetic switch (P/N: 31A-MSA-2)

Not Yet Reviewed

$2,419.00

—

$2,529.00

JET 15 in. Band Saws

Designed to perform, JET 15 in. band saws deliver more re-saw capacity, greater throat depth, and the horsepower you need to tackle bigger boards, create smoother edges, and master the intricate cuts. The heavy-duty cast-iron fence system is built to give you the sturdiness and support you need for every project and features a micro-adjust dial for exact placement. The table is slotted to allow for front blade removal and the guidepost has a stress-free magnetic door on the front for efficient blade changes. Large, independently adjustable guides are tool-less to save you time on set up. JET 15 in. steel frame band saws are engineered to build great projects through superior performance. Features: * Blade tracking window provides clear view of blade during tracking * Cast iron handwheels and ergonomic-designed knobs make adjustments smooth and easy * Cast iron trunnion for maximum support and stability * Conveniently located dual 4 in. dust collection ports catch dust and chips at the source * Easy-to-read blade tension scale can be viewed through upper door window * Heavy-duty tensioning with quick-release and three settings: full tension, partial tension, and full release * Rigid, 4-sided guidepost with rack and pinion adjustment for optimum blade support * Round table insert features leveling screws for precise adjustment * Single knob adjustment simplifies the blade tracking process * Table tilts 5 degrees left and 45 degrees right to accommodate a wide variety of cuts

Not Yet Reviewed

$2,859.00

OTC Back Buddy II Brake Drum Dollies

OTC Back Buddy II brake drum dollies offer several benefits for mechanics working on heavy trucks and trailers. They allow for safe and easy removal, transport, servicing, and installation of brake drums and hub assemblies, eliminating the strain of manually lifting these heavy components. The tool's features, such as a fast-motion ratcheting jack and tilting mechanism, contribute to increased efficiency and precision during brake jobs. Other features of the OTC Back Buddy II brake drum dollies are a fold-down handle, pneumatic tires, and an onboard tool tray to enhance ease of use and maneuverability in the shop environment. Product Features: * Remove, transport, service, and install heavy truck brake drums and hub assemblies for increased workplace efficiency * Helps prevent back injuries and other musculoskeletal strain associated with lifting heavy brake drums * Fast-motion ratcheting jack with 14 in. of vertical lift * Tilting mechanism allows for precise alignment during installation, which is crucial for proper brake function and can prevent damage to seals and other components * Fold-down handle for open access to the work area * Onboard lube tray and toolbox * Pneumatic rear tires * An array of optional adapter sets (sold separately) are capable of grabbing almost any truck hub assembly or brake drum, inboard or outboard

Not Yet Reviewed

$3,671.99

PWR North America Performance Radiator Modules

Introduce your vehicle to the ultimate cooling upgrade—a PWR North America Performance radiator module. Each one is handcrafted and TIG welded using premium aluminum materials and incorporate two Spal 500-watt brushless fans rated together at an impressive 3604 cfm. The fans are variable speed versions meaning they work in tandem with your radiator coolant temperature sensor or your ECM to use the right amount of current draw instead of being on full tilt all the time, unlike brushed fans. With less strain on your electrical system and increased longevity of your fans, you get optimal performance without compromising reliability. PWR Performance radiator modules are engineered with racing-inspired hemmed/louvered R-fins and rolled dimple tubes for maximum durability and efficiency. The design outperforms OEM by lowering coolant temperatures, resulting in more consistent horsepower output. Lower coolant temperatures also translate to longer track sessions and better tuning potential, giving you an unfair advantage on the road or track. Select the radiator module designed for your vehicle

Not Yet Reviewed

$2,649.00

Tuxedo TC-950 Tire Changers

Tuxedo TC-950 tire changers are a swing arm style machine with plenty of power with a large 1.5 hp motor made for larger diameter wheels. That makes them a great machine for a small automotive shop on a tight budget. You don't need to sacrifice quality to get a commercial machine that will hold up to daily use. The Tuxedo TC-950 tire changers are fully equipped with all the features you demand—at a price you can afford! Features of the Tuxedo TC-950 tire changers: * Swing arm design * Large square turntable * Tilting column and locking system * Handles tires up to 47 in. diameter and rim widths to 15 in. * Four pneumatic clamps and double acting cylinders * Bead seating inflation jets are integrated in the clamping jaws insuring quick and safe inflation * Twin clamping cylinders provide more power to hold the most difficult rims * Conveniently located and powerful bead breaker * No scratching—machine never contacts rim eliminating accidental damage * Large diameter hex mount/demount shaft for extra rigidity * Pressure limiter, water separator, and oiler are standard * NOT for use on dome-style dually truck wheels/tires

Not Yet Reviewed

$2,999.99

Baileigh Industrial DG-500HD Heavy-Duty Disc Grinders

Baileigh Industrial DG-500HD heavy-duty disc grinders are based on the popular DG-500 and takes grinding to a whole new level. These industrial disc grinders come with many features not found in other comparable machines. Features include: * Robust 2 hp, 1,750 rpm motor is directly coupled to the 20 in. grinding disc * Reversing switch for use in clockwise and counterclockwise rotation * Foot brake stops disc in seconds * Gas cylinder for easy table lift assist * Miter gauge * 45 degree down and 15 degree up table tilting * 220 V single phase

Not Yet Reviewed

$3,147.99

Summit Bucks

Clearance

Flaming River 1963-64 Impala Power Rack and Pinion Cradle Kits

Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1963-64 Impala power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These kits feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—no cutting, drilling, or welding is required. (Some models do not include column and/or power steering pump.) Power rack and pinion kits, designed for a floor shift column, include: * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Aluminum mounting reservoir (hoses sold separately) * Tilt column (available on some models)

Not Yet Reviewed

$3,667.99

$2,843.50

Baileigh Industrial BG-248-3 Belt Grinders

Designed to last for decades, this compact and economical 3-wheel belt grinder will add extra polish to any shop. The Baileigh Industrial BG-248-3 comes equipped with versatile features—like a choice of grinding tables and a convenient stand—so you can give a wide variety of projects a superior Baileigh finish. Additional details: * Runs on 110 V single-phase power, compatible with practically any fabrication site * 3 contact wheels—all of varying radii—accommodate a wide variety of grinding jobs * Adjustable, rotating wheel gives you the choice of 1 in., 1.5 in., and 2 in. diameters for the perfect finish on any part * 2 fixed wheels with 3.375 in. and 7.875 in. diameters respectively * Includes 3 grinding tables to match up perfectly with the different diameters of the contact wheels * Quick-release handles for fast conversions * Built from top-quality components, like sealed bearings and ground and hardened shafts * Robust stand allows you to tilt the grinder on its side for access on those awkward grinding situations

Not Yet Reviewed

$2,885.99

TMI Pro-Series 55 in. Split Back Bench Seats

No longer will you have to waste your time and money trying to repair worn-out factory seat frames and re-cover them with inferior foam and ill-fitting upholstery. The Pro-Series 55 in. split back bench seats from TMI are based on all-new frames, new foam for seat bottoms and backs, with hand-sewn covers. Contrasting stitch around seat perimeter adds a custom touch to your vehicle to create that one-of-a-kind interior. Every step is painstakingly taken to create a comfortable, durable, custom automotive seat. The seats come fully assembled and are 100 percent ready to bolt in with the appropriate mounting brackets (sold separately). Product features and details: * The Pro-Series 55 in. split back bench seats have built in-house seat frames, molded seat foam, and upholstery with sporty side bolsters * Frames are wrapped with a heavy bolstered, high-density foam * Seat reclining mechanism allows you to tilt or slide your seat * The seats are available in vinyl material with contrasting stitching * Seats come fully assembled and ready to bolt into your vehicle with the appropriate mounting brackets (brackets sold separately) Note: These made-to-order seats ship from manufacturer. Please allow additional time in shipping process for your custom-made-to-order seats.

Not Yet Reviewed

$2,056.00

Powermatic PM2820EVS Drill Presses

Gear up for the ultimate performance with the Powermatic PM2820EVS Drill Presses. The gear driven power transfers torque consistently and efficiently for any project in a wide range of materials. A removable cast table with 45 degree rotation has capacity for many projects, both large and small. The high-visibility laser pinpoints the drilling location for total accuracy. An included fence and stop help make repeat and production drilling efficient. The handles can be moved to the right or left for ease of use, and integrated LED light helps reduce shadows for project visibility. Highlights and features: * The large cast table adjusts to a range of positions and tilts to a full ninety degree position * Standing on an oversized cast base for outstanding stability for the 20 in. swing * The electronic variable-speed means torque is not lost using either the higher or low speed settings * Low speed setting ranges 150–870 rpm and the high speed setting ranges 600–3600 rpm * Designed for a range of materials and applications * For unbeatable accuracy, the laser cross hairs provide precise tool point indication * Gear driven power transfers torque consistently and efficiently for a wide range of materials * Handles can be reversed for left or right sided operation * Highly visible digital readout gives users control * Includes Powermatic's patented integrated depth stop for efficient drilling * Includes the most versatile table in the drill press market. Allows insert to be removed for better access to oversized pieces

Not Yet Reviewed

$3,035.00

Summit Bucks

Flaming River 1969-74 Nova Power Rack and Pinion Cradle Kits

Flaming River 1969-74 Nova power rack and pinion cradle kits are direct bolt-in steering systems that upgrade your classic muscle car. They mount right into the original chassis locations—no suspension modifications are needed! These cradle kits provide a full turning radius, more responsive steering, and install using simple hand tools. Most models also include a power steering pump and pulley, and polished aluminum mounting reservoir. Nova systems are fluid- and pressure-tested and certified. Let Flaming River provide the power steering you want for your 1969-74 Chevy Nova.

Not Yet Reviewed

$3,201.99

Flaming River 1957 Chevy Power Rack and Pinion Cradle Kits

Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.

Not Yet Reviewed

$2,913.99

Summit Bucks

Flaming River 1955-56 Chevy Power Rack and Pinion Cradle Kits

Flaming River 1955-56 Chevy Power rack and pinion cradle kits deliver precision steering on your restoration vehicle. Their Billet-Power rack and pinion systems allow for a full turning radius. They are engineered to replace the early long shaft steering box. By mounting the rack on the cradle, they not only reinforce the chassis, but also provide increased ground clearance. The true fixture-welded mounting cradle fits between the frame rails and bolts in place using the original chassis location with no suspension modification. Order the model recommended for your specific application.

4.5 out of 5 stars ( 2 )

$2,453.99

21 Results Found For "Tilt"