Availability
Showing In Stock Items. Show All 17 Items.
MSD took their original Pro Mag 12 distributors, added some new features to build performance, and subtracted 3 lbs. to help you get down the track faster. The results are the Pro Mag Lites. They utilize a magnetic pickup design with 16 rare earth magnets for rock-steady performance without recharging. They deliver 12 amps and 40,000 V worth of spark energy, feature built-in rev control that's good for up to 12,000 rpm, and use an all-billet housing for superior durability. They're compatible with MSD's crank trigger system.
Not Yet Reviewed
$2,599.95
—
$4,099.95
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 7 )
$3,625.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,280.46
—
$3,730.95
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
Give your old ride new life with these ATK High Performance GM 350 345 hp/400 lbs.-ft. Stage 2 long block crate engines. These engines are built to perform and look great without breaking your budget. Each engine is expertly assembled, balanced, blueprinted, and topped with quality components, making it a solid, reliable mill to power your muscle car, street rod, or pickup. ATK GM 350 345 hp Stage 2 long block crate engines include: * Handpicked, OE remanufactured block * ATK cast iron 75cc/165cc 1.94/1.50 cylinder heads * ATK dual plane intake manifold * OE crankshaft * OE 5.7 in. powder metal connecting rods * Hypereutectic pistons * Moly rings * Hydraulic roller camshaft .495in/.502ex 110LSA * Stamped steel 1.5 ratio rocker arms * HEI distributor, plug wires and plugs * Valve covers * Timing cover and double roller timing set * 5 qt. oil pan, high volume oil pump with pickup tube * OE style long water pump * PowerBond 8 in. balancer and 168 tooth flexplate
( 2 )
$3,635.99
On Sale
When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Pump/HP regulator/Go-Spark fuel injection master kits pair powerful components designed to support serious horsepower, plus precise fuel pressure and an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel dual fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go Fuel High Horsepower regulator will support 2,000 hp. Adjustable from 30 to 70 psi, this larger, dual output model is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port. It will accept a gauge. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.
Not Yet Reviewed
$2,395.99
$2,036.59
On Sale
FiTech Go EFI 2x4 625 hp system/Go-Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. And going a step further, the Go-Spark CDI ignition will elevate the spark for even more improved performance. Choose the master kit with your preferred fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 horsepower (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. The throttle bodies are available in two finishes. Go-Spark produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: * Go Fuel universal in-tank pump modules—255 or 340 lph—can be used on tanks with a depth of 6 to 15 in. A feed line, vent, and return are machined into the module for easy high-pressure line connections. Gaskets, terminals, and clamps are included. * Go Fuel universal in-tank regulated pump module—255 lph or 340 lph—single line system with a depth of 6.5 to 15 in. Pump has -6 AN pressure port and a 4-Bar (58 psi) regulator and suitable for most EFI-ready tanks * Go Fuel single pump fuel cell module—returnless--340 lph--billet top assembly is machined with a 2 in. filler assembly, as well as an internal regulator to maintain 58 psi. The module is machined to fit fuel cells with a 12-bolt flange or can be installed on any tank with the supplied hardware. * Go EFI inline pump kit—255 lph external pump suitable to support engines producing up to 600 (non-aspirated) hp. Supplied with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
Not Yet Reviewed
$2,424.99
$2,061.24
On Sale
FiTech Go EFI 2x4 625 hp system Force Fuel/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their 2x4 TBIs with one of their Force Fuel kits that allows you to keep the stock pump to feed the Force Fuel reservoir, while its internal pump provides high pressure to the EFI system. The throttle bodies are offered in matte black or bright aluminum finishes. Choose the master kit with your preferred finish and Force fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 hp (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Force Fuel delivery options: Go Fuel Force Fuel supports the fuel demands of an 800 hp engine on gas using an internal 340 lph pump. The reservoir holds a .5 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance. Force Fuel kit is supplied with 5 ft. of high-pressure fuel hose, 10-micron fuel filter, AN fittings, return line fitting bung, and a liquid filled gauge. Go Fuel Mini Force Fuel supports fuel demands up to 600 hp. These smaller versions are ideal for cramped engine compartments, can be installed in four positions, and feature a reservoir with an efficient 255 lph pump with an internal regulator delivering a consistent 58 psi for your EFI system. The Mini is supplied with a high-pressure fuel hose, AN fittings, return line fitting bung, and a liquid filled gauge.
Not Yet Reviewed
$2,424.99
—
$2,486.99
$2,061.24
—
$2,113.94
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
