Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
185 Results Found For "Engine Power Black and Blue 347"
Showing In Stock Items. Show All 293 Items.
On Sale
Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 21 )
$2,399.95
—
$2,609.95
$2,158.95
—
$2,347.95
Summit Bucks
S&S Cycle 110 in. Power Packages
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$3,396.95
Summit Bucks
S&S Cycle 129 in. Power Packages with Chain Drive Cam
S&S Cycle offers 129 in. power packages with chain drive cam for a variety of Harley-Davidson© street bikes from 2017 and up. These packages are the ideal combination of performance and savings designed to transform your engine from mild to wild. They combine S&S's biggest big bore cylinders with matched 550 cam/cam-plate/oil pump and everything else a high performance cam chest needs to make big, reliable horsepower. Transform your 107 in. into a 129 in. monster. Additional details: * Available with 129 in. Big Bore pistons/cylinders * 550 lift cam for the perfect combination of horsepower and torque * Works with stock crankcases * Powdercoat finish matched to factory * MLS (multi-layered steel) head gaskets * Includes tappets, tappet cuffs, and high lift springs * Includes 129 cam cover badge
Not Yet Reviewed
$3,359.95
Mishimoto Air-to-Water Performance Intercooler Power Packs
Mishimoto air-to-water performance intercooler Power Packs include S55 Performance intercooler, heat exchanger, and charge pipe kit to strengthen weaknesses in the BMW's design. The Power Packs are offered in a choice of 12 BMW-specific color matching options or classic black, so your go-fast parts in the engine bay can now match the exterior beauty of your BMW. Mishimoto's charge pipes feature full-aluminum construction with a cast mid-section and matte black silicone couplers that can handle the boost pressure, unlike the factory plastic that can crack under pressure, or split at the seams, creating a less than ideal situation as you pilot your vehicle. Next, the non-descript box is replaced with a stylish, colorful air-to-water intercooler featuring a bar-and-plate core with increased core volume and a single-pass coolant flow layout for optimal heat transfer. Adding to both these improvements is Mishimoto's larger full-aluminum heat exchanger providing increased external fin surface area and core volume. Additional features and specs: * 12 degree F drop in intake air temperatures and 10 degree F reduction in global intercooler coolant temperatures * Dyno-proven average power gains of 11 WHP and 8 WTQ with peak gains of up to 31 WHP and 10 WTQ on Stage 1 tuned vehicle * Intercooler features unique bar-and-plate, single-pass coolant passage design, and cast aluminum end tanks for optimal flow and cooling capacity * Intercooler core volume increased by 29 percent with 16 percent improved flow * Heat Exchanger features all-aluminum construction with 180 percent increase in fin surface area and 60 percent increase in core volume * Heat exchanger includes optional stone guard for added protection against road debris * Heat exchanger utilizes variable fin pitch for improved flow to DCT cooler * Mishimoto lifetime warranty
Not Yet Reviewed
$2,521.95
Summit Bucks
S&S Cycle 100 in. Power Packages
S&S Cycle 100 in. power packages are the ideal combination of performance and savings to transform your Harley® without breaking the bank. Bump that early Twin Cam from 88 cu. in. to 100 cu. in., while adding matched cams/cam plate/oil pump and everything else needed to reliably make big power. Optimize the performance of your bike by using one of these economical 100 cu. in. power packages from S&S Cycle. Features, benefits, and specifications: * Upgrade TC88 to 100 cu. in. * Engineered package to deliver the best bolt in performance * 4 in. bore bolt-on cylinder and piston kit * Wrinkle black finish * 585 Easy Start chain drive cams * TC3 oil pump and cam plate * Cam chain tensioners * Quickee adjustable pushrods with tubes * Precision tappets
Not Yet Reviewed
$3,396.95
Flaming River 1955-56 Chevy Power Rack and Pinion Cradle Kits
Flaming River 1955-56 Chevy Power rack and pinion cradle kits deliver precision steering on your restoration vehicle. Their Billet-Power rack and pinion systems allow for a full turning radius. They are engineered to replace the early long shaft steering box. By mounting the rack on the cradle, they not only reinforce the chassis, but also provide increased ground clearance. The true fixture-welded mounting cradle fits between the frame rails and bolts in place using the original chassis location with no suspension modification. Order the model recommended for your specific application.
( 2 )
$2,453.99
—
$3,393.99
Flaming River 1968-72 Chevelle Power Rack and Pinion Cradle Kits
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$4,525.99
—
$4,910.99
Flaming River 1957 Chevy Power Rack and Pinion Cradle Kits
Flaming River 1957 Chevy Power rack and pinion cradle kits engineered the popular rack and pinion cradle systems for Chevy vehicles. This true fixture welded mounting cradle fits between the frame rails and bolts in place using the original chassis location. No suspension modification is required and the system installs easily with hand tools. Full turning radius is engineered into the system.
Not Yet Reviewed
$2,913.99
—
$3,393.99
On Sale
Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$2,249.95
$2,023.95
On Sale
Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$2,249.95
$2,023.95
aFe Gemini XV Series Exhaust Systems
aFe Gemini XV Series exhaust systems produce power gains, aggressive sound, and awesome style. These cat-back systems are built from 3 in. mandrel-bent 304 stainless steel tubing and feature an electronically controlled exhaust cutout valve to quickly switch between mild and aggressive tones at the push of a button. Utilizing state-of-the-art computer-aided design technology, Gemini XV systems are designed for custom, high-tolerance factory fitment. They utilize factory-style hangers for a secure fit and hassle-free installation, and their construction offers race-proven strength and durability. aFe Gemini XV exhaust systems include two key fob remotes, control module, valve motor, and all necessary wiring. Additional features include: * Dual black or polished 304 stainless steel clamp-on exhaust tips * Tips feature an aFe POWER logo plate riveted on for a unique style * High-flow stainless steel muffler (finish may vary) * 100 percent MIG-welded for race-proven strength and durability * All necessary hardware is included
Not Yet Reviewed
$2,238.00
On Sale
Holley Mid-Mount Complete Accessory Systems
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 106 )
$4,714.95
$2,166.95
—
$4,560.95
aFe Control Sway-A-Way Coilover Kits with Compression Adjusters
Control Sway-A-Way coilover kits with compression adjusters by aFe feature race-winning engineering components with 20-plus years of testing—made into specifically designed kits that bolt directly into your vehicle. These kits offer adjustable ride height and Sway-A-Way's mid-speed compression adjusters for superior off-road damping curves without sacrificing any on-road comfort or handling. Sway-A-Way's 2.5 Series mid-speed compression adjusters mount directly into the remote reservoir. Offering 16 clicks of resolution, the compression adjuster can go from the unrestricted, fully-open (soft) position, to the fully-closed (hard) position—offering up to a 200 percent increase in damping force with just two full turns of the GF polymer adjuster knob. aFe Control Sway-A-Way coilover kits with compression adjusters are an excellent solution for any application in which weight often varies, or that might be used in a variety of terrains where a quick adjustment is desired for optimizing the comfort level of your ride. Refer to Applications tab to confirm fitment. Coilover shocks feature: * Bright, zinc plated steel cylinder bodies and CNC-machined aluminum components * Spanner wrench included for adjustments Speed compression adjusters feature: * Rebound damping remains unaffected regardless of setting and valving combination chosen * Constructed from billet 6061 T-6 aluminum * Red anodized and laser-etched housing is built to withstand the harshest of environments with excellent corrosion resistance * Metering piston is CNC-machined from 7075 T-6 aluminum to provide the best service life for high-speed applications
Not Yet Reviewed
$2,347.00
Rock Slide Engineering Step Sliders
Rock Slide Engineering Step Sliders ready your rig for any adventure. Rated for moderate off-road conditions, these fully functional, trail rated, rock sliders are integrated with a power step for easy access for all demographics and everyday use. RSE engineers have incorporated Smart Motor technology to keep your step deploying and retracting consistently, even in cold and harsh weather, and a sleep mode has been built in to minimize battery drainage. Step Sliders also provide protection for the rocker panel on your vehicle. The step will deploy a full 12 in. down from the body of the Slider when the door is opened, then after closing your door, the step will automatically retract and sit flush with the body of the step slider. Rock Slide Engineering Step Sliders feature 10-gauge, 3/16 in. steel construction and a state-of-the-art automated powdercoating system to acid etch the raw base material in preparation for the rugged textured black topcoat. The internals are made of stainless steel and aluminum to prevent rusting. The installation features a plug-and-play system designed to utilize the factory mounting points and the use of a stand-alone wire harness (no splicing or rewiring), allowing you to retain your manufacturer warranty after installation. Step Sliders are available for 2- and 4-door vehicles. Choose the kit designed for your vehicle. Includes: * Both driver and passenger side Step Sliders * Complete stand-alone wire harness * Magnetic door sensors * Additional mounting hardware
( 2 )
$2,309.99
On Sale
Holley Ford Mid-Mount Accessory Drive Systems
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,510.95
—
$2,612.95
$2,258.95
—
$2,350.95
BluePrint Engines Accessory Drive Systems
BluePrint Engines offers accessory drive systems for a variety of year/make and engine applications. Unless otherwise noted, the systems contain the various crankshaft pulleys; water pump components; power steering pulleys, brackets, and pump; alternator pulleys, brackets, and parts; and necessary hardware. Order the drive system recommended for your vehicle.
( 1 )
$2,299.99
—
$2,499.95
aFe Vulcan Series Exhaust Systems
aFe Vulcan Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Vulcan Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation, with most applications requiring no modifications. Vulcan Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. They're constructed of 304 stainless steel and include black or polished 304 stainless steel tips with a laser-cut stainless steel aFe power badge. Order the model with size specs and other options recommended for your vehicle.
( 3 )
$2,788.00
On Sale
Holley LS Engine Swap Accessory Drive Systems
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$2,305.95
$2,074.95
—
$2,817.95
Billet Specialties Tru Trac Gen V LT4 Serpentine Systems with A/C
Billet Specialties' Tru Trac Gen V LT4 serpentine drive system with A/C is the perfect accessory upgrade for GM's supercharged high-tech horsepower. The new LT4 Tru Trac features precision-machined brackets and pulleys, giving you perfect alignment with optimal belt wrap. Billet Specialties has worked with the nation's top chassis manufacturers to verify compatibility and fit. Adding hydraulic power steering is just one of the many advantages of the Gen V LT4. Tru Trac serpentine system includes: * Powermaster 170 amp one-wire alternator * Genuine Sanden SD7 AC compressor * Tuff Stuff power steering pump * ARP fasteners * Continental Poly-V serpentine belts * Hard coat anodizing for durability in high belt wear areas * Precision machined black anodized pulleys, brackets, and covers * Stainless steel hardware used throughout for corrosion resistance * Compressor manifold * Power steering hardline * Pre-installed power steering and alternator pulleys
Not Yet Reviewed
$3,104.95
Eddie Motorsports Raven Series LS Chevy S-Drive Serpentine Pulley Drive Systems
Eddie Motorsports Raven Series LS S-Drive serpentine pulley drive systems for Chevrolet LS engines are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors, billet aluminum water outlet, and a SFI approved balancer. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories.
Not Yet Reviewed
$2,668.95
—
$3,515.95
aFe Mach Force XP Exhaust Systems
aFe Mach Force XP exhaust systems are constructed of mandrel-bent stainless steel and come complete with free-flowing muffler(s), OE-style bayonet hangers, flanges, and band clamps, plus all hardware necessary for a hassle-free installation. Offered in single, dual, or quad muffler configurations, their smooth curves and large diameter tubes help reduce restriction and keep exhaust gas flowing smoothly for increased horsepower and torque. Available in cat-back, axle-back, and downpipe-back designs, almost all Mach Force XP exhausts are direct bolt-on systems that require no cutting or drilling and include all necessary hardware for a hassle-free installation. Most also include wrinkle-black powdercoated or polished 304 stainless steel tip(s) with a laser-cut stainless steel aFe power badge. Select models have carbon fiber tips with CNC-machined laser-etched inserts. aFe Mach Force XP exhaust systems are an ideal combination of performance, fit, and value. Additional features include: * Fit a variety of light trucks and cars, including European models * Available with 409 or 304 stainless tubing (varies by model) * "Stepped design" models increase exhaust velocity creating a broader torque curve throughout the rpm range * Straight-through, free-flowing stainless steel mufflers absorb high-pitch tones producing powerful sound * Leak-free 360-degree sealing * Stable pipe location in high-vibration and high-heat conditions * Bayonet tips hold hanger bushings in place for an OE-style fit * Several versions convert OE single exhaust to dual exhausts * Where applicable, incorporates an exhaust valve that uses the OE exhaust valve motor (not included) to regulate exhaust flow * Some systems use a unique resonance chamber to replace the OE muffler; produces a weight savings of up to 15 lbs. * Hi-Tuck design of specific models provide extra ground clearance when using an aftermarket suspension kit Note: Some aFe Mach Force XP systems are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
( 36 )
$2,238.00
All American Billet Silverline Series Serpentine Kits
All American Billet Silverline Series serpentine kits are designed to give any engine an aggressive black style, highlighted by machined finished areas for a truly standout look! These kits come standard with high performance accessories. Enjoy a no-hassle installation with all the hardware and necessary components included in the box. A variety of setups are available to fit models with or without power steering and air conditioning. Dozens of models are available; order the kit recommended for your vehicle and engine application.
( 7 )
$2,495.00
—
$3,395.00
All American Billet Serpentine Kits
All American Billet serpentine kits are perfect for cleaning up your engine compartment and giving it a fresh look. These kits come standard with high performance accessories. If you need to replace your belt system or just want to show off to your friends these All American Billet serpentine kits will do just that! Installation is easy with all the hardware and necessary components included in the box. A variety of different setups are available to fit models with or without power steering and air conditioning.
( 16 )
$2,095.00
—
$3,895.00
LS Classic Series Accessory Drive Kits
LS Classic Series accessory drive kits provide the finishing touch to your vintage look LS engine. The kits utilize a spring loaded tensioner and a single six rib serpentine belt to drive all of your accessories. These kits include high-quality, name-brand components, and billet aluminum brackets with a semi-gloss black powdercoated finish. All of the LS Classic Series kits include a 180 amp Powermaster alternator with internal fan. Kits with power steering feature a GM Type II/TC style power steering pump and an integrated, large capacity, remote, billet aluminum reservoir. Kits are also available with high capacity Sanden 709 air compressor. LS Classic Series accessory drive kits are available to work with early F-Body/GTO or truck belt lines. Must use an F-body water pump, and the appropriate balancer (not included) with this kit.
( 1 )
$2,328.95
