Free Shipping on Orders Over $109 at Summit Racing

FTI Performance Pro Powerglide Level 5 Transmissions

FTI Performance Pro Powerglide Level 5 transmissions are an unbreakable unit in an SFI-approved case. Equipped with the FTI creatively designed spiral springs and valve body, these units don't creep when the brake is set—a must in today's racing world. With in-house machining, these trannies are hand-assembled by one builder, so each clearance is set to exacting tolerances. The transmissions house the greatest advances in powerglide racing technology, and they're designed to withstand the rigors of today's high performance engines in an extremely demanding environment. Other features include: * 1500 advertised horsepower rating * Protree transbrake 250 lbs. * Lightened steel clutch hub * 1.80 straight cut planetary * Vasco input shaft * 8-clutch drum * Red race clutches * High-flow pump * 4340 output shaft

5.0 out of 5 stars ( 3 )

$4,899.00

Wilwood Forged Dynalite Rear Parking Brake Kits

Wilwood forged Dynalite rear parking brake kits provide the best solution for many rear axles requiring a parking brake. The forged billet Dynalite 4-piston calipers, one-piece drum/rotors, and high-friction pads provide balanced braking for all types of performance street, strip, and show machines. Their internal shoe parking brake design stays hidden, but has excellent static holding power for parking. Wilwood offers optional caliper finishes and rotor designs to enable the builder to personalize the style and optimize brake performance for every individual application.

4.57 out of 5 stars ( 122 )

$2,323.05

GearStar GM 4L65E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L65E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Stall: 2,600 to 3,200 * High performance 12 in. furnace-brazed converter -- Flanged hub and carbon fiber clutch * Master overhaul kit with Alto hardened steels * Raybestos Stage 1 frictions * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 13-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * Carbon fiber wide 2-4 band * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$4,945.00

GearStar GM 4L60E Level 3 Transmissions

GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L60E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Raybestos Stage 1 frictions and steels * TransGo heavy-duty reprogramming kit with Shift Command * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 10-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * High-energy wide bands * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (chrome) * Transmission mount * New OE steel transmission pan

Not Yet Reviewed

$4,945.00

Wilwood Forged Dynalite Rear Electronic Parking Brake Kits

Wilwood Forged Dynalite rear electronic parking brake kits provide a complete solution for popular muscle car rear axles that require a parking brake. Forged Billet Dynalite 4-piston calipers, 12.19 in. one-piece rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The unique electronic parking brake caliper provides high-torque static holding power for parking without mechanical cabling. Supplied with a control unit and harness assembly, it simplifies installation and use. Optional caliper finishes and rotor designs enable builders to personalize the style and optimize brake performance for every individual application.

5.0 out of 5 stars ( 3 )

$2,323.05

FTI Performance Bracket Series Powerglide Level 4 Transmissions

Bracket racers live and die by consistency. FTI Performance Bracket Series Powerglide Level 4 transmissions are durable, lightweight, and efficient automatic transmissions. They're engineered with an aftermarket SFI-approved case and spiral springs that don't creep when the brake is set—a must in today's racing world. Every tranny is machined in-house and hand-assembled by one builder to ensure that every clearance is set to precise tolerances. These transmissions house the greatest advances in racing technology. Other features include: * 1100 hp * Bracket tree transbrake * Steel clutch hub * 1.80 straight cut planetary * 300M input shaft * 6-clutch drum * Red race clutches * High-flow pump * Deep aluminum pan

Not Yet Reviewed

$4,699.00

World Products 351 Ford Man O'War Blocks

The engineering team at World Products collaborated with leading Ford racers and professional engine builders and developed the Man O'War replacement blocks for the popular 351 small block. They are available in two deck heights, to ensure compatibility with all popular OEM and aftermarket cylinder head/intake manifold combinations. World Products' new Man O'War Ford blocks have been created utilizing contemporary CAD/CAM manufacturing technology, for more precisely-detailed blocks than were ever before possible through conventional foundry methods. And they're made to QS-9000 quality standards, the highest in the industry.

5.0 out of 5 stars ( 3 )

$4,571.32

World Products 302 C.I.D. Ford Man O'War Blocks

The engineering team at World Products collaborated with leading Ford racers and professional engine builders to develop the Man O'War replacement blocks for the popular 302 small block. They are available in two deck heights to ensure compatibility with all popular OEM and aftermarket cylinder head/intake manifold combinations. World Products' new Man O'War Ford blocks have been created utilizing contemporary CAD/CAM manufacturing technology for more precisely detailed blocks than were ever before possible through conventional foundry methods. And, they're made to QS-9000 quality standards, the highest in the industry.

Not Yet Reviewed

$4,494.05

—

$4,571.32

World Products Motown Race Engine Blocks

World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.

4.0 out of 5 stars ( 1 )

$4,549.46

Jesel Front Drive Combos

For racers and engine builders who run both camshaft belt drives along with the Jesel front mount distributor, front drive combos incorporate the two units into one convenient, value-packed part number--and it's available for the company's most popular applications. Why choose the combination? Fast and easy intake manifold changes. More efficient plug wire routing. And it isolates cam torsional deflection. With a much cooler mounting location, there's no interference with manifold runners, windshield, or firewall areas. As with all Jesel distributor drive systems, a crank trigger type firing system and an external ignition box are required.

Not Yet Reviewed

$2,275.00

Transmission Specialties Powerglide Performance Racing Transmissions

For over 40 years Transmission Specialties has been the trusted name in the performance automatic transmission industry. TSI has pioneered much of the technology that is now commonplace in the transmission marketplace. The inventors of the spragless converter and the aftermarket helical Powerglide planetary, TSI is known worldwide for manufacturing and assembling the highest quality transmissions and components. Unlike many production builders, TSI transmissions are handcrafted from beginning to end by one highly skilled and experienced technician. This process ensures that you get the highest quality product every time. Transmission Specialties Powerglide performance racing transmissions can be chosen in power outputs ranging from 1,100 to 2,500 hp, with short or long Powerglide output shaft, and the 3000, 5000, and 5500 Series transmissions come with an SFI-approved case. Get a transmission you can trust to put the power to the ground—Transmission Specialties Powerglide performance racing transmissions.

Not Yet Reviewed

$2,982.00

—

$3,992.69

Chevrolet Performance LS7 Cylinder Heads

Great cylinder head airflow has been a key enabler of the LS-Series' exceptional performance. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads. From the LS6 heads for smaller-displacement engines, to LS7 style heads for 427 in. and-larger combinations, these bare cast aluminum heads benefit from extensive research and development—ensuring maximum airflow without compromises. In fact, many professional builders use these heads as straight bolt-ons with no further machining. The engine cylinder heads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are the true OE parts installed during the production of or validated by GM for select vehicles. LS7 CNC-ported cylinder head assembly notes: * 356-T6 aluminum head * Fully CNC'd ports and chambers * LS7 rectangle port design * Minimum 4.100 in. bore * 270cc CNC'd intake ports, 85cc CNC'd exhaust ports * 70cc CNC'd combustion chambers * Capable of over 600 hp Aluminum LS family head technical notes: * Manufactured from 319-T5 aluminum alloy * High-efficiency combustion chambers * Symmetrical intake and exhaust ports * Angled spark plugs (14mm; 5/8 in. hex; 3/4 in. reach; taper-seat plugs) * 15 degree valve angle (except C5R and LS7) * Bolt-down-type rocker arms (except LSX-DR, LSX-CT) * Centerbolt valve cover hold-downs * Fits Gen III and Gen IV small blocks only NOTE: Chevrolet Performance heads will not fit 4.8L and 5.3L engines, due to their smaller bore sizes.

Not Yet Reviewed

$3,234.74

Edelbrock Pro-Port Raw Cylinder Heads

Edelbrock Pro-Port raw cylinder heads are un-ported versions of the Edelbrock race-winning Victor Series CNC heads for the professional cylinder head porter and engine builder. Pro-Port raw cylinder heads are cast with extra-thick walls to allow for custom CNC porting. They are the only heads designed specifically to accommodate almost any CNC port shape, size or location. Some Edelbrock Pro-Port raw heads feature their special Hot Isostatic Pressing or HIP Process.

Not Yet Reviewed

$2,220.50

—

$2,340.50

Fab Fours Jeep JK Grumper Winch Bumpers

When it comes to front-end protection for off-road use, the designers and builders at Fab Fours like going to extremes. One of their newest incarnations, the Grumper for Jeep JK Wranglers, combines a bumper and extended grille for one incredible air flowing, winch hiding, front-end masterpiece. These bumpers include clevis mounts, CNC laser-cut Angry Eye light cutouts, and a winch mount. The extreme stubby design gives exceptional tire clearance, while their 11-gauge steel construction provides strength without excessive weight. Models are available in bare steel or with a matte black 2-stage powdercoat over epoxy primer finish. Keep your winch and front-end protected with a Fab Fours Jeep JK Grumper winch bumper. Features include: * Patent pending * Aggressive design * Winch-ready for Warn Zeon 10 * Fully customizable four removable inserts for different color options * Simple and quick Installation

5.0 out of 5 stars ( 1 )

$2,034.64

Detroit Speed Front Speed Kit 2 Suspension Kits

Detroit Speed front Speed Kit 2 handling packages are bolt-on components meant to take the guesswork out of upgrading—and improve the overall suspension. These kits are designed for builders interested in taking their vehicles' performance to a higher level. They include parts to improve handling, ride quality, and caster/camber; and then take everything up a notch by including coilover springs and shocks to adjust ride height. When you want your classic muscle car to perform like a modern-day sports car, install a front Speed Kit 2 handling package and have some fun. Dozens of models and options are available for applications from the 1960s and up.

Not Yet Reviewed

$4,335.95

—

$4,716.95

Scat Forged Pro Series Standard Weight Crankshafts

Scat's forged Pro Series standard weight crankshafts will give you strength and reliability to dominate the competition. Proud to be a pioneer in the grass roots of racing heritage, Scat has designed and engineered their forged Pro Series standard weight crankshafts for the budget-minded engine builder and racer alike. Each Scat crankshaft is skillfully machined, precision finished, ion-nitrided and heat-treated for superior quality, extreme strength, and durability, and have straight shot and chamfered oil holes, large radii on all journals, lightening holes in all rod journals and aero wing counterweights. Scat proudly produces some of the finest crankshafts in the world—and with race proven wins! Select the Scat Pro Series standard weight crankshaft for your application needs.

Not Yet Reviewed

$2,368.99

—

$2,370.99

Aeromotive 3.5 GPM Brushless Variable Speed In-Tank Gear Pumps

Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.

Not Yet Reviewed

$2,058.30

17 Results Found For "Builders"