Free Shipping on Orders Over $125 at Summit Racing

McGaughy's Black SS Suspension Lift Kits

"Now, that's a truck!" McGaughy's Black SS suspension lift kits give your rig a "real" lift. The kits are available for 6 to 10 in. of lift to boost your truck's stance and your ego. The elite adjustability is possible with the included front struts and because McGaughy's drops the crossmember and differential a full 7 in. This keeps your CV axles' angles, suspension geometry, and steering geometry at factory specifications. To keep these performance lifts looking good, they receive a durable, glossy black powdercoated finish. Plus, the front crossmember is accented with highly polished stainless steel inlays. Install one of McGaughy's SS lift kits, and the next time you hear, "Whoa, what a truck!" it will be referring to yours! McGaughy's SS suspension lift kits may include: * Lift spindles * Adjustable front struts or extenders * Crossmembers * Lower A-arm support rods * Tie rods * Sway bar drops and extenders * Skid plate * Fabricated lift blocks * Bump stop extenders * Brake line extenders * Rear shocks or extenders * U-bolts and necessary hardware

5.0 out of 5 stars ( 2 )

$2,832.99

—

$3,299.99

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats

Brothers Trucks Sport Pro-Classic Split-Back Bench Seats are specifically designed for your vintage or classic GM truck or SUV. Add style and performance to your interior with these low-back sport benches. Constructed with a tubular steel frame and reclining mechanism, the high-density seat foam has molded sport side bolsters for support. These platforms are covered in premium black vinyl with black stitching for compatibility with any interior theme. Step up your dress up game with an assist from Brothers Trucks split-bench seats.

Not Yet Reviewed

$2,254.95

Race Star 63 Pro Forged Double Beadlock Black Anodized Machined Wheels

Race Star 63 Pro Forged double beadlock black anodized machined wheels are ready for the winner's circle with lightweight one-piece configuration, a performance enhancing 5-spoke design, and brilliant looks. Why one-piece "configuration"? Because most of these wheels began life as two pieces, but with high-tech laser fusion welding the two are "melted together" to become one with unbelievable strength and significantly less weight. Each of these double beadlock wheels includes a polished ring with black accents—and a black anodized ring with machined accents. Race Star 63 Pro Forged black anodized machined double beadlock wheels are offered in several sizes, bolt patterns, and backspacings to best fit your race car's setup.

5.0 out of 5 stars ( 1 )

$2,147.98

—

$2,584.98

Bilstein Black Hawk Powersports UTV Shocks

Bilstein Black Hawk Powersports coilovers are specifically engineered to vastly improve the performance of your UTV. These direct fit shock and coil spring assemblies offer position-sensitive damping and 4-way adjustability, all features that will take your UTV to the next level. Black Hawk Powersports feature Bilstein's patented ZoneControl position-sensitive technology that contains five independently tuned damping zones—three compression and two rebound. ZoneControl incorporates an internal Jounce Cut Off system (JCO) which is effectively a 2-stage hydraulic bump stop. The JCO has a 10-position clicker that allows the rider to fine-tune bottom-out control. For rebound, ZoneControl features a Rebound Cut Off (RCO) that acts to settle the vehicle at the final stage of suspension droop. The RCO will protect the damper, eliminating the need for a limit strap. Black Hawk Powersports offer four unique external adjustments: high/low speed compression, rebound, and JCO—all easily accessible and ready for quick damping changes on the fly. Bilstein Black Hawk Powersports feature an all-aluminum design with gold finned reservoirs. All applications come with Dual Rate Coils and crossover nuts for easy ride height and spring preload adjustments. Black Hawk Powersports are completely serviceable and designed to be race-ready right out of the box. This extremely versatile coilover package will provide excellent comfort and unsurpassed bottom-out control. Experience a unique "bottomless" ride with Bilstein's new Black Hawk Powersports coilover packages, available separately for front and rear applications.

Not Yet Reviewed

$2,025.00

Black Horse Off-Road Tubular Fender Flares

Gear up your vehicle with Black Horse Off-Road tubular fender flares! They add an aggressive look to your application with a wider stance while protecting paint from road debris and minor scrapes. Constructed from steel, the flares keep your vehicle street-legal with larger wheels and tires. Add the perfect finishing touch to your vehicle! Order the Black Horse Off-Road fender flares designed to fit your application.

Not Yet Reviewed

$2,182.75

PEM Racing Black MAX Dirt Late Model Quick-Change 1-Ton Rear End Housings

PEM Racing introduces its newest and strongest quick-change rear-end, the black MAX Dirt late-model 1-ton aluminum housing. The 8-rib side bells and 1-ton tubes have been tested to have less flex. These quick-change rears have lower rotating friction and will disperse heat better. They're available for Rocket XR1 and Longhorn Circle Track chassis. Additional details: * Thermal coated black outside of bells and center housing * REM finishing of ring and pinion, bearings and races for reduced friction and heat * Drilled aluminum spool for reduced rotating weight * Black anodized aluminum one-ton tubes T6061 with 1-ton snout nuts * New PEM 8-rib side bells (stronger and less flex) * Magnesium / aluminum alloy castings * Drilled aluminum spool * Gun-drilled heat-treated lower shaft * Roller pinion nose bearing * Posi locking nut on pinion * Forged steel 1310 yoke * Vent tube * Steel core cover gasket * 5 longer thru-bolts for suspension component attachment

Not Yet Reviewed

$2,845.99

On Sale

Holley Mid-Mount Complete Accessory Systems

Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.

4.62 out of 5 stars ( 108 )

$4,714.95

$2,120.95

—

$4,560.95

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$2,399.95

—

$2,609.95

$2,158.95

—

$2,347.95

QA1 1963-72 C10 Coilover Conversion Systems

Upgrade your classic truck to a modern driving feel and performance with QA1's 1963-1972 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while reducing weight 140 lbs. over stock. Order the QA1 1963-72 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Adjustable Shock Valving: Double-adjustable shocks offer independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 5 )

$4,450.95

—

$4,650.95

Magnuson Magnum TVS1320 Supercharger Kits

Magnuson TVS1320 supercharger kits make power you can live with! Magnuson's powertrain integration technology offers you the ability to have big horsepower and drivability in the same supercharger. These TVS1320 systems were developed to be direct bolt-on kits with minimal downtime, and straightforward installation. An enthusiast with basic tools can install the system in a weekend, or about a day for an experienced installer. The TVS1320 also looks and fits like OEM, almost like it belongs there. With no cutting or welding, it's also easily reverted to stock. The supercharger itself is maintenance free- pre-filled and sealed, nothing to check or top off for the lifetime of the engine. Magnuson only uses the highest quality components in their supercharger kits. Everything you need to supercharge your application is included, right down to detailed step-by-step installation instructions. Order yours today and unleash the power of a Magnuson Supercharger!

5.0 out of 5 stars ( 1 )

$4,195.00

On Sale

Holley Ford Mid-Mount Accessory Drive Systems

Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance

Not Yet Reviewed

$2,510.95

—

$2,612.95

$2,258.95

—

$2,350.95

QA1 1963-87 C10 Front Coilover Conversion Systems

QA1 1963-87 C10 front coilover conversion systems are a great upgrade to your C10 front suspension. Each kit comes with QA1's proven single or double adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C10 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability; they're topped off with performance ball joints and low-friction, maintenance-free bushings. These kits will add up to 7 degrees of caster for more stability, and allow for optimum camber adjustment in a lowered truck. For those on a budget, QA1 also offers kits without the upper control arm—which will add 3-4 degrees of caster, while still providing ride height adjustability with coilover shocks. Order the model designed for your vehicle application.

4.86 out of 5 stars ( 28 )

$2,506.95

—

$2,728.95

QA1 1988-98 C1500 Level 2 Front Coilover Conversion Systems

QA1 1988-98 C1500 level 2 front coilover conversion systems are a great upgrade to your C1500 front suspension. Each kit comes with QA1's proven single adjustable Pro Coil coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. The shocks allow for wider wheel and tire combos, ride height adjustability, and are 100 percent dyno-tested and serialized. The QA1 C1500 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability. The kit will provide a total of 4 in. of drop when used with drop spindles, or 2 in. of drop with factory spindles. Performance ball joints and low-friction, maintenance-free bushings are standard. Level 2 easy bolt-on kits will add more stability and allow for optimum camber adjustment in a lowered truck. Everything you need is included, all the way down to the hardware; no welding required.

4.71 out of 5 stars ( 7 )

$2,219.95

Van Steel Complete Trailing Arm Assemblies

Van Steel complete trailing arm assemblies are available with factory-style T-arms (no sway bar holes) or offset T-arms with spherical bearings. Additional contents include these new components: * Rotors * Spindles * Caliper mounting brackets * Bearing supports * Backing plates * Stainless steel parking brake hardware * Parking brake shoes * Bearings, seals, and races

4.0 out of 5 stars ( 3 )

$2,229.99

—

$2,299.99

Dakota Digital RTX Direct-Fit Gauge Kits

Dakota Digital RTX direct-fit gauge kits retain your classic vehicle's stock look without sacrificing the late-model features you love. Every effort was made to incorporate OEM design elements regarding the layout, face styling, and indicators. Starting from scratch, these CNC-machined cluster housings are filled with electronics that raise the bar--in fact, the high-def message centers can be configured to display just about any piece of information needed. The RTX Series utilizes a central control box to make installation and setup as easy as possible. Choose the model with gauges and features designed to fit your specific vehicle.

4.81 out of 5 stars ( 108 )

$2,090.00

—

$2,422.50

On Sale

Holley Terminator X Max Stealth 4150 EFI Fuel Injection Systems

Holley Terminator X Max Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Max Stealth 4150 systems provide transmission control for later model GM 4L60E and 4L80E transmissions.

4.0 out of 5 stars ( 4 )

$2,399.95

—

$2,819.95

$2,158.95

—

$2,536.95

Wilwood Forged Narrow Superlite 4R Big Brake Rear Parking Brake Kits

Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits are the perfect addition to front Big Brake upgrades for incredible stopping power. These disc brake kits feature FNSL4R 4-piston oversize forged billet aluminum calipers, 13 or 14 in. 2-piece premium rotors, and high performance BP-10 compound pads. Also included is a high-quality, drum-style parking brake assembly. The neatly hidden internal shoe system provides a clean installation, with superior static holding power for parking. Wilwood Forged Narrow Superlite 4R Big Brake rear parking brake kits provide the extra power to reel in your beast. Order the kit designed for your vehicle application.

4.69 out of 5 stars ( 29 )

$2,141.96

—

$3,599.35

QA1 1973-87 C10 Coilover Conversion Systems

Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 1 )

$4,450.95

—

$4,650.95

Borla ATAK Cat-Back Systems

Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.

4.84 out of 5 stars ( 550 )

$2,049.99

—

$4,399.99

McGaughy's Suspension Lift Kits

Give your rig a lift—via McGaughy's suspension lift kits! Their key components feature a brilliant gloss metallic silver powdercoat for longevity and durability. Installation is easy with minimal drilling; no re-routing of the exhaust, or cutting or grinding on the front or rear differential is necessary. This equipment is CNC-formed, machined, and laser-cut in-house from the highest grade materials. The spindles are CAD-designed for a perfect and accurate fit. Complete kits include the lower A-frame support rods, along with compression struts to add extra support and prevent the front and rear crossmembers from flexing. Dozens of kits are available for vehicles from the 1990s and up. Choose the style, lifted height, and other options recommended for your application; then elevate your rig to a higher stance with McGaughy's suspension lifts.

4.4 out of 5 stars ( 10 )

$3,838.99

On Sale

Holley Terminator X Stealth 4150 EFI Fuel Injection Systems

Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!

4.0 out of 5 stars ( 9 )

$2,509.95

$2,257.95

On Sale

Holley Terminator X Stealth 4500 EFI Fuel Injection Systems

Holley Terminator X Stealth 4500 EFI systems feature eight 100 lb. fuel injectors capable of supporting up to 1,500 hp naturally aspirated or 1,250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control—improving idle stability, drivability, and wide-open throttle horsepower! They are designed to fit with Gen 3 Ultra Dominator air cleaners and fuel crossovers, enabling you to easily convert your 4500 equipped 800+ horsepower dragster or door car. Choose from a black or polished aluminum body.

Not Yet Reviewed

$2,919.95

$2,626.95

BluePrint Engines Accessory Drive Systems

BluePrint Engines offers accessory drive systems for a variety of year/make and engine applications. Unless otherwise noted, the systems contain the various crankshaft pulleys; water pump components; power steering pulleys, brackets, and pump; alternator pulleys, brackets, and parts; and necessary hardware. Order the drive system recommended for your vehicle.

4.0 out of 5 stars ( 1 )

$2,299.99

—

$2,499.95

On Sale

Holley Sniper EFI Stealth 4500 Fuel Injection Systems

Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange

4.25 out of 5 stars ( 4 )

$2,199.95

660 Results Found For "BLACK"