Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
6 Results Found For "9/16 x 18 lug nuts"
Showing In Stock Items. Show All 9 Items.
Aeromotive Brushless A1000 Fuel Cells with Speed Controller
Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy top-level performance with advanced technology when you order the Aeromotive Brushless A1000 Fuel Cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an A1000 brushless fuel pump, and aircraft-style filler cap * All-aluminum construction and matches design used in Ford Cobra Jet, Chevy COPO Camaro, and many of the MOPAR Drag Pack cars * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional A1000 models and uses a reduced current draw at higher EFI pressures * Outlet ports are female ORB-10 * Return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 900 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 700 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire
Not Yet Reviewed
$2,264.15
—
$2,431.80
Aeromotive Eliminator Brushless Fuel Cells with Speed Controller
Aeromotive offers various Eliminator brushless fuel cells, featuring the pump and a fluted pickup with a 100-micron prefilter for worry-free installation. Simply strap the fuel cell in, hook up your fuel line and wires, then get ready to drive! The innovative interior baffling system helps keep a constant column of fuel at the pump inlet during extreme driving conditions, making them ideal for off-road vehicles, drag racing, autocross, drifting, and more! Enjoy Eliminator performance with advanced technology when you order the Aeromotive Eliminator brushless fuel cells with speed controller best suited for your application. More product features, items, and specifications include: * All models include the fuel cell, an Eliminator brushless fuel pump, and aircraft-style filler cap * All-aluminum construction * Available in 6-, 15-, or 20-gallon capacities * Sizes are 10 in. tall (all models) and 12 in. X 12 in. (6-gallon), 20 in. X 18 in. (15-gallon), 20 in. X 24 in. (20-gallon) * Universal 0 to 90-ohm built-in fuel level sending unit (where applicable) * In-cell pump reduces noise and prolongs proper functioning with extended service life in ethanol and methanol * Pump is lighter and quieter than traditional Eliminator models and uses a reduced current draw at higher EFI pressures * Outlet and return ports are female ORB-08 * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Carburetor rated flow of 1,300 lbs./hr. at 9 psi, 13.5 volts * EFI rated flow of 1,000 lbs./hr. at 45 psi, 13.5 volts * True Variable Speed controller provides dedicated 0-5V analog DC input signal * Flush-mount lid assembly * Threaded male studs/3-wire
Not Yet Reviewed
$2,499.15
—
$2,665.75
Baer Brakes Baer Claw Extreme+ Disc Brake Systems
Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)
( 1 )
$4,199.95
—
$4,606.95
Aeromotive 5.0 GPM Brushless Spur Gear Pump Fuel Cells
Aeromotive 5.0 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated 100-micron pre-filter. Order the Aeromotive 5.0 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Triple male wire threaded stud terminals * Not compatible with pulse modulated systems or fuel pump speed controllers
( 2 )
$2,855.10
—
$3,011.10
ReadyLift Suspension Big Lift Kits
Forget squeaks, rattles, and vibrations—the ReadyLift big lift kits ensure superior performance with smooth rides over all terrain. These leveling and big lift kits feature heavy-duty angled and offset top mount strut extensions that realign the struts to optimize shock performance and minimize wear. A specially designed lower mount strut pre-load spacer offers the added benefit of a slight increase in spring rate to better manage unsprung mass resulting from the larger wheels and tires on your newly lifted truck. To lift the rear, new fabricated steel rear blocks with integrated bump stop landings are added, as well as new rear shock extensions to retain the factory performance shocks. With ReadyLift, you don't just get a lift kit, you get peace of mind that your vehicle will excite and delight your senses! Choose the big lift kit for your application needs. Key features and benefits: * Heavy-duty, laser cut tabbed and slotted steel construction * 3/16 in. thick steel plate cross members and skid plate * Anti-torsion boxed and gusseted plate steel differential drop brackets * Delivers clearance for increased aftermarket tire sizes—provides an impressive lift, allowing for greater clearance and enhanced off-roading capabilities * Cast iron knuckles have been engineered to provide ideal geometry for a great ride and handling * Unique brackets for proper relocation and angle of the front differential
Not Yet Reviewed
$2,419.95
Flaming River 1962-64 Galaxie Power Rack and Pinion Cradle Kits
Flaming River 1962-64 Galaxie rack and pinion cradle kits are designed for Ford Galaxie and other full size Fords. They provide power steering for modern driving comfort, especially when parking. The cradle mounts in the original chassis location with no chassis modification and the center support does not have to be removed. Kits are available with a choice of either paintable mill or polished stainless steel columns. Kits are available with or without a steering column. Kit includes: * Billet aluminum reservoir * Power rack and pinion cradle system * All Grade 8 mounting hardware
( 1 )
$2,914.99
—
$3,329.99
