Free Shipping on Orders Over $109 at Summit Racing

On Sale

Holley VR Series Billet Fuel Pumps

Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.

5.0 out of 5 stars ( 1 )

$3,299.95

$2,968.95

On Sale

Holley Fuel Cell EFI Pump Module/VR Series Brushless Fuel Pump Assemblies

Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator

Not Yet Reviewed

$3,199.95

Aeromotive 5.0 GPM Brushless Variable Speed In-Tank Spur Gear Pumps

Aeromotive 5.0 GPM brushless variable speed in-tank spur gear pumps help deliver ground-shaking performance with advanced technology. These pumps are lighter than the traditional Pro-Series models and feature reduced current draw at higher, EFI pressures. They also provide extended service life in methanol and ethanol, while using an integral spur-gear pumping mechanism for precise, positive-displacement. Order the Aeromotive 5.0 GPM brushless spur gear pump best suited for your application. Additional features, items, and specifications include: * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Continuous 90 psi operating pressure and up to 150 psi peak pressure (base plus boost) * EFI rated flow of 1,700 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,850 lbs./hr. at 9 psi (13.5 V) * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Not compatible with pulse modulated systems or fuel pump speed controllers

Not Yet Reviewed

$2,087.44

—

$2,307.17

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

On Sale

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,249.95

$2,023.95

ATK High Performance GM 350 Vortec 350 HP Stage 2 Long Block Crate Engines

Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers

4.0 out of 5 stars ( 9 )

$3,688.99

Special Offer

Nitrous Outlet Holley Hi-Ram Nitrous Spacer Plate Systems

For higher horsepower levels, proper nitrous flow into the airstream is critical for even cylinder to cylinder distribution. Holley Hi-Ram nitrous spacer plate systems are equipped with nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. The spacer plates are available in single and dual stage kits, complete with everything you need to spray up to 300 hp. (With additional jetting, the single stage can spray up to 400 hp, and the dual stage can spray up to 800 hp.) They include all electrical, hardware, gasket, brackets, and jetting for 50-100-150-200-250-300 hp.

Not Yet Reviewed

$3,217.99

—

$3,762.99

Aeromotive 3.5 GPM Brushless Spur Gear Pump Fuel Cells

Aeromotive 3.5 GPM brushless spur gear pump fuel cells help deliver ground-shaking performance with advanced technology featuring an aircraft-style filler cap, ORB-10 outlet, AN-08 baffled return, and roll-over protected AN-08 vent. This matches the fuel cell design used in the Ford Cobra Jet, Chevy COPO Camaro and many of the MOPAR Drag Pack cars with a baffled design that keeps fuel at the pump inlet and fluted pickup with an integrated pickup and 100-micron pre-filter. Order the Aeromotive 3.5 GPM brushless spur gear pump aluminum fuel cells best suited for your application. Additional features, items, and specifications include: * Available in 6, 15, or 20-gallon capacities * All models are 10 in. tall; the 6-gallon models are 12 x 12 in.; 15-gallon models are 20 x 18 in.; 20-gallon models are 20 x 24 in. * All-aluminum construction with a natural finish * Pumps are lighter than the traditional Pro-Series with reduced current draw at higher, EFI pressures * Pumps have extended service life in methanol and ethanol and an integral spur-gear pumping mechanism * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Continuous 90 psi operating pressure and up to 150 psi peak pressure, base plus boost * For 12-16 V negative ground setups, with 16 V requiring a voltage regulator or step-down to 12 V * Not compatible with pulse modulated systems or fuel pump speed controllers * EFI rated flow of 1,250 lbs./hr. at 40 psi (13.5 V) * Carburetor rated flow of 1,350 lbs./hr. at 9 psi (13.5 V) * ORB-12 inlet (application specific) * Fixed speed models are ideal for blow-through carbureted racing engines up to 2,000 hp (at the flywheel) * Fixed speed models swappable to True Variable Speed (TVS) with 18047 retrofit kit * Universal 0 to 90-ohm built-in fuel level sending unit (except 6-gallon models) * Triple male wire threaded stud terminals

Not Yet Reviewed

$2,828.24

—

$2,978.68

Nitrous Express Pro Power Nitrous Plate Systems

Nitrous Express has a nitrous system for people with carbureted vehicles whose high performance philosophy is "too much is almost enough." Their Pro Power plate systems crank out power in spades, from a 100 to as much as a 500 hp increase over stock at the wheels. The heart of these systems is the "Next Generation" Phase 3 distribution plate, which has no spray bars to sag, split, or disturb the airflow into the manifold. Race fuel is required for increases above 150 hp. The kits come complete with: * Nitrous bottle and stainless steel mounting brackets * Solenoids * Relay * Supply line and fittings * Switches * Wiring * Mounting hardware

4.5 out of 5 stars ( 2 )

$2,025.33

—

$2,249.16

Nitrous Express Nissan/Infiniti Dual Nozzle Nitrous Systems

Specifically engineered for late model Nissan and Infiniti applications, these Nitrous Express dual nozzle nitrous systems make it easy to improve the performance of these rides. Nitrous Express Nissan/Infiniti dual nozzle nitrous systems include an Autolearn TPS switch that allows the nitrous to activate only at wide-open throttle. There's no need to cut your factory fuel lines--a direct plug-in fuel line adapter is provided to simplify the installation! With no additional jets, Nitrous Express Nissan/Infiniti dual nozzle nitrous systems can produce up to 300 wheel horsepower! Included in these kits are: * Lightning series fuel and nitrous solenoids * Two Shark nozzles and adapters * Bottle * Extra-long stainless braided N2O line * Stainless bottle brackets * Master arming switches * Relays * Relay harnesses * Jetting * All necessary installation hardware

5.0 out of 5 stars ( 1 )

$2,047.90

Nitrous Express Stage 6 Nitrous Systems

If you have a carbureted vehicle and you're on a budget or are just getting started, Nitrous Express Stage 6 nitrous systems could be the ideal beginning point. They're tunable to deliver power boosts in six graduated increments, from 50 hp all the way up to 300. That means you can pick one of the lower increases for an engine that's close to stock, and then ramp things up later on when you add forged pistons. Systems include: * Nitrous distribution plate * Supply hose and fittings * Solenoids * Switches * Wiring * Jets * Mounting hardware * Race fuel required for increases above 150 hp

4.0 out of 5 stars ( 8 )

$2,138.63

On Sale

FiTech Go EFI 3x2 Tri-Power 600 HP System/Go Spark Fuel Injection Master Kits

FiTech Go EFI 3x2 Tri-Power 600 hp system/Go Spark fuel injection master kits are inclusive EFI kits with fuel delivery solutions, plus an upgrade to high-powered sparks for improved combustion and power output. In these master kits, FiTech mates their Tri-Power systems with either a Go Fuel in-tank (regulated) or fuel cell single pump module to provide everything needed to convert your carbureted vehicle to EFI. Choose the master kit with your preferred fuel delivery solution. FiTech's Go EFI Tri-Power system is supplied with three 500 cfm throttle bodies and their self-learning EFI technology to provide the looks you want with the performance and drivability benefits that only fuel injection can deliver. Supporting up to 600 hp, the 3x2s are designed for a simple, ready-to-run installation. The compact ECU is easy to mount and only a few engine parameters are needed to get your hot rod engine fired up. The system includes three throttle bodies, remote ECU, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors. Fuel delivery options: Go Fuel regulated in-tank pump modules are offered in different flow rates, and they include gaskets, terminals, and clamps. Go Fuel single fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware.

Not Yet Reviewed

$2,783.99

—

$2,894.99

$2,505.59

—

$2,605.49

Nitrous Express Hellcat Billet Supercharger Lid Nitrous Systems

Nitrous Express has the upgrade your Hellcat wants. Their Billet Supercharger Lid for Hellcat and Demon applications replaces the factory supercharger lid for a quick and clean install. The improved airflow design of this lid ensures maximum flow—and the placement of nitrous passages provides huge increases in horsepower and torque. This system does not use a spray bar, so it injects nitrous and fuel inline with the supercharger air discharge. The fuel/nitrous mixture is swept evenly to each runner. Injecting nitrous into this pre-intercooled hot air discharge super-cools the air charge, resulting in increased flow across the factory intercoolers for maximum power gains. As mentioned, this system does not utilize a spray bar, which means that the nitrous/fuel passages are CNC-machined into the lid itself; the spray pattern is in the perfect location every time. The system includes: * Ready to bolt-on billet supercharger lid * Billet fuel line adapter * Lightning Series billet aluminum and carbon fiber nitrous and fuel solenoids * Stainless steel braided lines * All wiring, switches, and mounting hardware * Jetting for 100, 150, 200, 250, and 300 hp * Systems with a bottle include stainless steel bottle brackets and industry exclusive Lightning 500 bottle valve

Not Yet Reviewed

$4,319.20

On Sale

FiTech Go EFI 8 PA 1200 HP System Dual Pump/HP Regulator/Go-Spark Fuel Injection Master Kits

When you are getting serious about 4-digit horsepower under your hood with boost or nitrous, Go EFI 8 Power Adder 1,200 hp systems are up to the task. And, with FiTech's master kits you also get a high-pressure fuel delivery solution to take your setup from conventional to EFI. FiTech Go EFI 8 PA 1,200 hp system Dual Pump/HP regulator/Go-Spark fuel injection master kits pair powerful components designed to support serious horsepower, plus precise fuel pressure and an upgrade to high-powered sparks for improved combustion and power output. Go EFI 8 Power Adder bolt-on throttle body features eight high-flow injectors capable of fueling up to 1,200 hp. It is supplied with FiTech's Pro-tuning software and features the ability to data-log information. To ensure the best atomization of the fuel injection, the annular discharge design is increased to 20 jet streams to support the fuel volume required under boost, and has a built-in 2.5 BAR MAP sensor to handle the increased boost pressures, along with built-in timing controls based on boost or a nitrous input. The throttle body system includes handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, Pro-tuning laptop software, instructions, and warranty info. Go Fuel dual fuel cell pump modules feature a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. Go Fuel High Horsepower regulator will support 2,000 hp. Adjustable from 30 to 70 psi, this larger, dual output model is crafted from billet aluminum and features -6 ORB ports along with a vacuum/boost port. It will accept a gauge. Go-Spark CDI ignition produces a series of multiple sparks below 2,500 rpm to improve starting, idle quality, and throttle response. At higher rpm, the CD technology continues to deliver full energy sparks through racing rpm to ensure complete combustion of the fuel mixture. Designed for 4-, 6-, and 8-cylinder engines equipped with a distributor, Go-Spark accepts the trigger signal from an HEI, amplifier, points, or 2-wire non-magnetic pickup distributors.

Not Yet Reviewed

$2,395.99

$2,156.39

Nitrous Express EFI Single Nozzle Nitrous Systems

It used to be that big horsepower increases required major internal engine modifications. However, Nitrous Express has a way that's a whole lot easier--and cheaper. Just bolting one of their EFI single nozzle nitrous systems onto your domestic or import can add from 35 to 150 hp to a V8, with intermediate choices of 50, 75, and 100 hp (with a maximum of 75 hp for fours and sixes.) These systems rely on a Nitrous Express Shark performance nozzle and will work with standard fuel pumps, without any timing retard. The kits include the nitrous bottle, nozzle, hoses, solenoids, wiring, and mounting hardware.

5.0 out of 5 stars ( 2 )

$2,023.98

Nitrous Express 4500 Assassin Plate Stage 6 Nitrous Systems

Nitrous Express 4500 Assassin Plate Stage 6 nitrous systems for alcohol fuel deliver a 100 to 300 hp rating, are offered with or without a bottle, and feature one of the most technically advanced single stage plates ever designed—the Assassin. Nitrous Express CNC-machined 7/8 in. thick Assassin plates integrate nitrous and fuel discharge ports into the outer perimeter, producing a unique spray pattern that assures perfect nitrous-fuel distribution. This solves the problems commonly found on single plane manifolds, particularly small and big block Fords, and creates superior distribution and outstanding atomization with no spray bars to sag, split, or block airflow. Select the Assassin Stage 6 system without or with the preferred bottle size. Systems include: * Jetting for 100, 150, 200, 250, and 300 hp * Billet aluminum and carbon fiber lightning solenoids * Heavy-duty 40 amp relay * 4 AN supply line * Billet aluminum Y-fittings * Stainless braided solenoid-to-plate lines * Bottles available in 10, 12, and 15 lb. capacities * Systems with bottle come with stainless bottle brackets and Lightning 500 bottle valve * Fits standard Dominator flange carburetors

Not Yet Reviewed

$2,063.37

Nitrous Express GT-R R35 Nitrous Plate Systems

If there's a way you can make more power, you take it! The Nitrous Express GT-R R35 is the best overall nitrous plate system available for Nissan GTRs. From the upgraded, high-flow solenoids to the patented Shark nozzle, these systems exhibit nothing but quality. Their Autolearn TPS module allows the nitrous to activate only at wide-open throttle, and the direct plug-in fuel line adapter provides a simplified installation. GT-R R35 systems include twin billet aluminum nitrous plates that bolt between the throttle bodies and the intake manifold for an easy install and a clean look. Systems also include: * Billet aluminum and carbon fiber Lightning Series solenoids * Stainless braided N2O line * Master arming switch, relay * Relay harness * Hardware * Jetting for 50, 75, 100, 125, and 150 hp * Choice of no bottle, or 5 lb., 10 lb., 12 lb., or 15 lb. bottle * Systems with bottles include billet aluminum Lightning 500 bottle valve and stainless bottle brackets

Not Yet Reviewed

$2,518.42

Nitrous Express Billet Crossbar Nitrous Plate Systems

Never be satisfied with the status quo! It is time for the next generation in crossbar nitrous plate technology. The CNC machined design eliminates round spray bars resulting in excellent atomization and cylinder distribution without rotation, sagging, or the disruption of airflow. These CNC-machined plates include a nitrous bottle with a custom solenoid. The Lightning Series solenoids feature CNC aluminum bodies with an integrated purge port, which allows for connecting a purge valve directly to the body of the nitrous solenoid, for less plumbing and clean looks. The kits also come with fittings, lines, switches, relays, and every nut, bolt, and electrical connector needed for installation.

5.0 out of 5 stars ( 4 )

$2,423.83

—

$2,446.92

On Sale

FiTech Go EFI 3x2 Tri-Power 600 HP System Fuel Injection Master Kits

FiTech Go EFI 3x2 Tri-Power 600 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their Tri-Power systems with either a Go Fuel in-tank (regulated) or fuel cell single pump module to provide everything needed to convert your carbureted vehicle to EFI. Choose the master kit with your preferred fuel delivery solution. FiTech's Go EFI Tri-Power system is supplied with three 500 cfm throttle bodies and their self-learning EFI technology to provide the looks you want with the performance and drivability benefits that only fuel injection can deliver. Supporting up to 600 hp, the 3x2s are designed for a simple, ready-to-run installation. The compact ECU is easy to mount and only a few engine parameters are needed to get your hot rod engine fired up. The system includes three throttle bodies, remote ECU, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Fuel delivery options: Go Fuel regulated in-tank pump modules are offered in different flow rates, and they include gaskets, terminals, and clamps. Go Fuel single fuel cell pump modules features a billet top assembly machined with a 2 in. filler assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware.

Not Yet Reviewed

$2,572.99

$2,315.69

Special Offer

Nitrous Outlet Stinger Plate Nitrous Oxide Systems

Nitrous Outlet Stinger Plate nitrous oxide systems feature a second generation Stinger plate designed to work with either 4150 or 4500 flanged carbureted-style intake manifolds. The new billet aluminum Stinger plate has a larger conical cone than the previous version and is based off of the same technology as the Nitrous Outlet Nitrous Puck, enabling them to delivering up to 600 hp with proper jetting. The plate features 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet Stinger Plate nitrous oxide systems include nitrous and fuel solenoids, solenoid brackets, a main feed line, relay, harness, jetting, hardware, and wiring.

Not Yet Reviewed

$2,676.99

—

$2,777.99

NOS LS Hi Ram Intake Dry Nitrous Systems

NOS LS Hi-Ram intake dry nitrous systems include everything needed for optimum nitrous distribution throughout LS-based engines. Their dry single-stage plate system sandwiches between the bottom base and the top plate on Holley Hi-Ram intake manifolds. Nitrous is then evenly sprayed directly into each cylinder runner. The intake plate is made from 6061 T-6 billet aluminum, and available in a black or clear anodized finish with a laser-etched NOS logo. The included jetting is for up for 250 hp, but the entire system is capable of supporting 1000+ hp. Systems are available with a 10 lb. or15 lb. aluminum, or 12 lb. carbon fiber nitrous bottle.

Not Yet Reviewed

$2,049.95

Nitrous Outlet 4500 GENIII Stinger Race Nitrous Oxide Plate Systems

Bitten by performance! Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate systems include everything you need to spray 50-600 hp. They feature plates with unique, extended reach, cone-shaped "stingers" with many discharge ports for fuel and nitrous. The design covers a 360 degree pattern that completely saturates the air intake charge for precise, even atomization. These plates are CNC-machined from 6061 billet aluminum with black anodized bodies and red anodized stingers—as well as being engraved with Nitrous Outlet logo and fuel/nitrous ports. Sharpen your track performance with a Nitrous Outlet 4500 GENIII Stinger race nitrous oxide plate system.

Not Yet Reviewed

$2,645.99

—

$2,679.99

Nitrous Outlet 4150 GENIII Stinger Nitrous Oxide Plate Systems

Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems come out of the box with everything you need to spray up to 500 hp! Nitrous Outlet is proud to introduce their 3rd generation Stinger plate systems. They feature a revolutionary extended-reach cone that sits further down inside the intake plane to prevent nitrous from hitting the sidewalls on intakes with a high plane or spacer plate. Each stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems include everything you need to spray 50-500 hp. Overview: * Max-flow 500 hp anodized billet aluminum stinger plate * Single entry * 4150 flange * 360 degree discharge pattern * Gasket, jetting, and hardware included * E85 compatible with different jetting * Jetting included for 50-500 hp

Not Yet Reviewed

$2,787.99

—

$2,835.99

Nitrous Outlet 4500 GENIII Stinger Nitrous Oxide Plate Systems

Nitrous Outlet 4500 GENIII Stinger nitrous oxide plate systems come out of the box with everything you need to spray up to 500 hp! Nitrous Outlet is proud to introduce their 3rd generation Stinger plate systems. They feature a revolutionary extended-reach cone that sits further down inside the intake plane to prevent nitrous from hitting the sidewalls on intakes with a high plane or spacer plate. Each stinger has 15 discharge ports for nitrous and 15 discharge ports for fuel. The 15 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution. Nitrous Outlet 4150 GENIII Stinger nitrous oxide plate systems include everything you need to spray 50 to 500 hp. Overview: * Max-flow 500 hp anodized billet aluminum stinger plate * Single-entry * 4500 flange * 360 degree discharge pattern * Gasket, jetting, and hardware included * E85 compatible with different jetting

Not Yet Reviewed

$2,622.99

—

$2,887.99

27 Results Found For "Holley HP Series Fuel Pumps 12-150"