Free Shipping on Orders Over $109 at Summit Racing

Edelbrock Pro-Flo 4 XT EFI Systems

Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.

4.59 out of 5 stars ( 22 )

$2,945.95

Nitrous Express LT4 Supercharger Lid Nitrous Systems

Nitrous Express LT4 Supercharger lid nitrous systems replace your factory supercharger lid on GM LT4 Superchargers for a quick and clean install. The lids feature an improved airflow design that can increase up to 25 hp by itself, and increase power even more when your system is activated. Nitrous Express LT4 Supercharger lid systems are available as nitrous and nitrous/water methanol systems, with or without bottles. The nitrous spray bar system injects nitrous and fuel above each intake port, providing direct port-like distribution and ensuring maximum performance. Nitrous systems include: * Billet aluminum and carbon fiber lightning solenoids * Industry exclusive billet aluminum Lightning 500 bottle valve * Stainless steel braided lines * Stainless steel bottle brackets * Wiring, switches, and jetting for 100 to 300 wph Nitrous and water/methanol systems will also include: * Billet aluminum and carbon fiber lightning water/methanol solenoids * High-pressure electric pump * Stainless braided soft lines * Pre-bent stainless steel hard lines * Filtered nozzles * Plated fittings * Composite reservoir * Switches * NX Stage 2 digital progressive methanol controller

Not Yet Reviewed

$2,918.06

—

$4,638.74

Chevrolet Performance Gen V LT1 Head and Camshaft Kits

Chevrolet Performance Gen V LT1 head cam kits will increase your already-strong LT1. With CNC-ported heads and a camshaft designed specifically for direct injection, these kits offer the first "Hot Cam" for the Gen V LT1. Your kit may include: * Camshaft * Valve lifter guide * Valve lifters * CNC cylinder head assembly Note: Recalibration is required for accurate engine operation.

Not Yet Reviewed

$3,760.78

Vortech Carbureted Centrifugal Supercharger Kits

Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.

3.0 out of 5 stars ( 1 )

$4,449.99

Fab Fours Lifestyle Winch Front Bumpers

Fab Fours Lifestyle winch front bumpers are robust, high-clearance front-end protectors with multiple attachments pre-installed. They are designed for ruggedness and exceptional obstacle avoidance with their tapered sides and bottom—and the 2-stage, black powdercoat finish looks great with any color scheme. Your Jeep will be safely sliding off any obstacles with one of these Fab Fours Lifestyle winch front bumpers. Features, parts, and specs may include: * Capable of supporting up to 10,000 lb. winches * Injection molded light cut-outs * Fab Fours 90mm fog and 60mm turn indicator lights * 1 in. D-ring mounts * 3/16 in. steel body * Fully welded tow hooks * Winch delete tray/cover (not on all models) * Available with or without tubular pre-runner guard

Not Yet Reviewed

$2,229.99

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.57 out of 5 stars ( 7 )

$2,329.99

Fab Fours Premium Winch Full Guard Bumpers

Whether you're dealing with big rocks on a trail, an angry bull in a field, or a zombie apocalypse, you won't have to worry about damaging the front of your truck when you install one of Fab Fours' Premium winch full guard bumpers. These bumpers are constructed from 3/16 in. steel plate, mounted with a 2-piece system that allows for adjustability, and are available in 2-stage matte black powdercoat or bare steel. The brush guards are constructed from 2 in. tubing with a rectangular steel center brace, and the wings use 1.750 in. tubing—secured to the bumper ends for better stability and rigidity. The Premium bumper you order will be matched to the body lines of your specific vehicle for an excellent wraparound fit and better-than-OE tire clearance. Each unit features 1 in. D-ring mounts, injection-molded light housings with 60mm turn signals and 90mm fog lights, and will accept winches up to 16,500 lbs. line strength. Some models are available with pre-drilled holes for sensors. Let them know you mean business from the very first glance—with Fab Fours Premium winch full guard bumpers.

5.0 out of 5 stars ( 1 )

$3,462.99

—

$3,969.99

Fab Fours Premium Winch Bumpers

Whether you use your truck for daily commutes, work, play, or a bit of everything, you know the stock front bumper is about useless for anything more than looks. Fab Fours Premium winch bumpers not only improve the strong looks of your truck, they're also built to take a beating and laugh it off. These bumpers are constructed from 3/16 in. steel plate, mounted with a 2-piece system that allows for adjustability, and are available in bare steel or a 2-stage matte black powdercoat finish. Each bumper is matched to the body lines of the vehicle for excellent wraparound fit and better-than-OE tire clearance. They feature 1 in. D-ring mounts, injection-molded light housings with 60mm turn signals and 90mm fog lights—and will accept winches up to 16,500 lbs. line strength. When it's time to look tough and play rough, upgrade to a Fab Fours Premium winch bumper!

Not Yet Reviewed

$3,250.99

Fab Fours Premium Winch Pre-Runner Bumpers

If you've ever watched a running back driving through defenders or a linebacker preparing for a tackle, you'll notice they're slightly bent over and leaning forward. Fab Fours Premium winch Pre-Runner bumpers know the best way to prepare for issues is to be ready and waiting. These bumpers are constructed from 3/16 in. steel plate, mounted with a 2-piece system that allows for adjustability, and are available in 2-stage matte black powdercoat or bare steel. The grille loop is constructed from 2 in. tubing, while the support tubes use 1.750 in. and are secured to the bumper for better stability and rigidity. Each bumper is matched to the body lines of the vehicle for excellent wraparound fit and better-than-OE tire clearance. They feature 1 in. D-ring mounts, injection-molded light housings with 60mm turn signals and 90mm fog lights, and will accept winches up to 16,500 lbs. line strength. Some models are available with pre-drilled holes for sensors. Be prepared for whatever may jump in front of your truck—with a Fab Fours Premium winch Pre-Runner bumper.

Not Yet Reviewed

$3,869.99

Nitrous Outlet Nitrous Oxide Plate Systems

Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp

4.0 out of 5 stars ( 3 )

$2,268.99

—

$3,562.99

VEGE Remanufactured Long Block Crate Engines

VEGE remanufactured long block crate engines are an excellent foundation for budget-minded builds. These premium-quality refurbished engines are drop-in replacements for a wide range of stock vehicles—and can be retrofitted into additional applications. Each engine is reverse-engineered to ensure that any original defects are removed. Certified technicians recondition the long blocks to factory specifications, replacing wearable parts or machining them back to OE standards. The engines are thoroughly tested and calibrated to deliver maximum performance and long-term durability. Order the VEGE remanufactured crate engine recommended for your vehicle.

3.81 out of 5 stars ( 72 )

$3,864.99

—

$4,904.99

Brodix Cylinder Heads IK 215 Cylinder Heads for Small Block Chevy

Brodix offers IK 215 Series cylinder heads for small block Chevy 350 and 400 engine applications—focusing on the only two things that matter: performance and price! They include a revolutionary ultra casting, versatile intake ports designed for optimum versatility, and combustion chambers that allow the use of several types of fuel. Standard features are A-356 virgin aluminum alloy, phosphorous bronze valve guides, valve seats for use with unleaded fuel, ends milled and drilled for accessories, and a straight spark plug angle. These are the most affordable high-quality aluminum cylinder heads on the market. The hassle-free top-end combo kits include: * Complete cylinder heads * Intake manifold (4150 Series) * Valve covers * Headbolts and washers * Intake bolts and washers * Valve cover studs and nuts * Head gaskets * Intake gaskets * Exhaust gaskets * Carburetor gaskets * Valve cover gaskets * Spark plugs * Brodix hat IK Series 23-degree cylinder head details: * Standard valve cover pattern * 64 cc / 70 cc combustion chambers * Straight spark plugs * Ends milled and drilled for accessories * Ductile iron valve seats for use with unleaded fuel * CNC-ported combustion chambers available as large as 75 cc

Not Yet Reviewed

$3,330.99

Chevrolet Performance Remanufactured Automatic Transmissions

Chevrolet Performance remanufactured automatic transmissions deliver dependable performance on a budget. These trannies feature quality components built to factory specifications that make your installation easy and the results satisfying. Remanufactured doesn't equate to lack of quality. Back your engine up with remanufactured automatic transmissions and receive the level of performance you expect from Chevrolet Performance.

Not Yet Reviewed

$4,676.57

13 Results Found For "injection"