Availability
Showing In Stock Items. Show All 39 Items.
On Sale
Holley Mid-Mount complete accessory systems achieve what no other accessory bracket systems do--eliminate the brackets! This pulls in all the accessories tighter than other accessory drives by bolting directly to other components for a clean, integrated form. They offer superb engine visibility to show off your horsepower, not your accessories. Holley Mid-Mount complete accessory systems are available in several versions and finishes to match your application. Order the kit designed to fit your engine.
( 104 )
$2,349.95
—
$4,599.95
$2,113.95
—
$4,138.95
On Sale
Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance
Not Yet Reviewed
$2,449.95
—
$2,549.95
$2,203.95
—
$2,293.95
On Sale
Holley's Ford 7.3L Godzilla high-mount accessory drive complete kits with their patent-pending technology, integrates timing cover, oil pump, oil pan, water pump, alternator, and the option for A/C and/or P/S, all in one streamlined system. Plus, they are compatible with both factory crank pulleys and aftermarket damper/pulleys. Positioning an engine swap correctly is crucial, ensuring it aligns with the vehicle's original engine's crankshaft centerline. Holley's innovative solution achieves just that, allowing proper engine placement while providing clearance for a stock Fox Body hood (when used with a low-profile intake). Our system replaces Ford's sump-mounted oil pump with a high-capacity gerotor pump positioned behind the timing cover, gaining crucial crossmember and ground clearance. To ensure reliability, they incorporated a proven pump design utilizing Melling sourced components that mimics the factory pressure level. Unlike most pumps that require removing the oil pan to change the pressure spring, Holley introduced a first-of-its-kind external access port, allowing hassle-free spring switching. Moreover, their cast aluminum oil pan features a performance-minded windage tray and baffle, guaranteeing proper oil pickup during high-G maneuvers. For extreme situations, such as drag racing, upgrade to the optional race baffle to always ensure proper oil delivery. These accessory drive systems offer flexible configuration options to meet various needs, making Holley's Godzilla high-mount accessory drive kits the ultimate solutions for engine swaps, offering unparalleled functionality, adaptability, and ease of installation. Choose from natural as-cast aluminum or black finish.
Not Yet Reviewed
$2,599.95
—
$3,199.95
$2,338.95
—
$2,878.95
On Sale
Holley High-Mount complete accessory systems offer exceptional clearance for swap applications when your chassis clearance is very limiting. They mount your accessories higher on the engine with many configurations and accessory options available. Holley High-Mount complete accessory systems are available in a natural, black, or polished finish. Order the kit designed to fit your LS/LT engine.
Not Yet Reviewed
$2,299.95
—
$2,649.95
$2,068.95
—
$2,383.95
On Sale
All-Pro Off-Road APEX front bumpers are designed to meet your demands for durable, low-profile bumpers that look as good as they function. These All-Pro Expedition bumpers, dubbed APEX for short, are available in lightweight aluminum and steel versions with hoop options for multiple lighting configurations. All-Pro Off-Road APEX front bumpers ready your rig with rugged armor and appeal that will illuminate any excursion you undertake. Features and options may include: * CNC laser-cut, brake-formed, and MIG-welded 1/4 in. thick aluminum plate or 3/16 in. steel plate * Two beefy 1 in. thick recovery points made from 1.5 in. x .250 wall tubing welded to thick plates * Two 4 in. light mounts are built-in * Ideal for trucks running 35 in. or larger tires and requiring winch and light mounts * Integrated recover points * Ships bare steel or aluminum * Includes mounting hardware and lower valance * Aluminum is almost 50 percent lighter than steel version * Improved approach angle and ground clearance * Optional LED hoop gives space to mount a small light bar * Optional center hoop is tall enough to offer grille protection, as well as providing two additional light mount tabs * Optional full hoops option includes the center hoop and headlight hoops for the highest level of protection (not available for all versions) * Heavy-duty winch mounting (not available for all versions) * Lower valance (not available for all versions) * All-Pro IFS skid plates attach directly to these bumpers
( 2 )
$2,379.99
—
$2,449.99
$2,022.99
—
$2,082.49
On Sale
If you need the world's finest high performance street/strip small block Ford heads, then check out AFR's 185cc emissions-legal Renegade Street cylinder heads (CARB E.O. #250-3). With lightweight 8mm, 2.020 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 or 72cc, and 68cc exhaust ports, AFR's 185cc Ford cylinder heads are designed for 302-351 c.i.d. engines operating from 1,500 to 6,500 rpm. A 3/4 in. thick head deck makes the AFR heads ideal for nitrous or blower applications. These heads will not accept rail rocker arms, and hardened push rods are required on models designed for stud mount rocker arms.
( 37 )
$2,328.90
$2,212.55
On Sale
For the ultimate small block Ford street car, consider AFR 165cc SBF Renegade 20 degree street heads. Unlike some aftermarket heads, AFR's Ford cylinder heads (CARB E.O. # D250-3) fit all of your stock components; no special parts are required! With lightweight 8mm, 1.900 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 and 60cc, and 68cc exhaust ports, these emissions-legal aluminum cylinder heads are perfect for 289 and 302 engines operating from idle to 6,000 rpm. A 3/4 in. thick head deck makes the heads ideal for nitrous or blower applications. Renegade cylinder heads will not accept rail rocker arms, and hardened pushrods are required on models designed for stud mount rocker arms.
( 28 )
$2,328.90
$2,212.55
On Sale
Whether you have a mundane daily driver or a high-horsepower racer, Vortech has a supercharger kit for you. Their centrifugal supercharger kits feature lightweight aluminum impellers that are heat-treated and high-speed balanced to ensure smooth operation. An O-ring compressor housing seal and an innovative impeller seal improve sealing and reduce friction. Vortech has taken away the headaches of building a custom kit by engineering these kits to have a true OEM-quality fit and finish. Each kit is 100 percent complete, right down to the wire ties. Most kits include a matched compressor supercharger unit with SQ technology for "Super Quiet" operation. A high-flow air intake system with a reusable air filter, heat-resistant silicone hose couplings, and premium-grade flex hose is included as well. Additional features: * Flow-tested cast aluminum and/or urethane air discharge tubing * OEM-style, heat-treated cast 356 aluminum mounting brackets * Supercharger drive pulley * Integrated belt tensioner * Premium drive belt * Stainless steel clamps * Heavy-duty mounting hardware * Choice of satin or polished finish * Step-by-step, fully illustrated installation manual
( 9 )
$3,633.99
—
$4,215.99
$3,270.59
—
$3,794.39
On Sale
Baer Brakes Baer Claw Pro+ disc brake systems are built to please the most demanding users. They include Baer 6P compact 6-piston calipers machined from 2618 forgings, resulting in the stiffest possible design, even at extreme operating temperatures. They use radial mounting configurations to disperse loads evenly, and internal fluid transfer tube passages for an ultra-clean look. Baer Claw Pro+ disc brake systems include brake rotors with zinc coated surfaces and a matched set of brake pads. The unique 2-piece rotors use an aluminum hat to reduce overall weight, allow for differential expansion of the rotor plates, and lower thermal transfer to the hub. Nearly 700 models are available for specific vehicle, bolt pattern, and axle applications.
( 8 )
$2,394.95
—
$3,294.95
$2,154.95
—
$2,964.95
On Sale
Building a fully hydraulic steering system can be quite a project. Thankfully, Trail-Gear has taken all of the guesswork out of the process with these complete, user-friendly hydraulic steering kits! Everything you will need is included, such as mounting brackets specifically designed for Toyota apps. The steering pump has an all-steel housing and emits 4.5 gpm of flow and 1,650 psi of pressure. Each high-pressure hose is steel-braided with crimped-on ends. These kits are available in 6, 8, and 10 in. ram sizes, and are ideal for use with links and most leaf spring applications. Kits include: * 6, 8, or 10 in. double-ended ram and clevis kit * Orbital (100 ml, 125 ml, or 160 ml) * Full hydraulic steering pump with pulley * Tie rod kit * Double-ended ram mounting kit * Steering column * Orbital mounting kit * Reservoir with filter * Cooler * Power steering belt * Complete hose kit * All necessary hardware
( 4 )
$2,499.99
$2,124.99
On Sale
Edelbrock Pro-Flo 4 XT EFI systems provide you with a high performance Pro-Flo XT-style intake and 90mm throttle body. Unlike regular throttle body EFI systems, Pro-Flo 4 features the fuel rails and individual injectors for each cylinder mounted on the manifold. This Edelbrock design produces the best fuel atomization and distribution for the ultimate performance, as well as delivering the most control and the most efficient way to deliver fuel to your engine. Along with innovative design, Pro-Flo 4 systems have the latest technology with an all-new ECU, and even more features for advanced tuning, with the key being their exclusive E-Tuner app with base calibrations developed on their dyno. Edelbrock Pro-Flo 4 XT EFI systems include and feature: * Engine Control Unit with faster processor and upgraded Bluetooth chip in a thinner waterproof design * Fully assembled XT intake manifold with air valve, fuel rails, and injectors * Fully assembled OEM high-quality wiring harness with pre-terminated connectors and labeled connection for a simplified installation * E-Tuner application for setup and engine monitoring * Wideband oxygen sensor * Distributor * Gaskets and hardware * Installation instructions * Ready to run out of the box with pre-loaded calibrations * Self-learning technology--no tuning experience or laptop tuning required * Ignition control--adjust ignition curve with the E-Tuner 4 App for optimal performance and mpg * Offered with multiple fuel injector choices * Now boost compatible up to 15 psi by switching to a 2.5-bar TMAP sensor and downloading the new firmware update from Edelbrock for free! It is recommended to regularly check for firmware updates even if not utilizing boost control. * Systems automatically compensate for altitude and weather changes * E-Tuner 4 app with Bluetooth connectivity between ECU and Android phone or tablet. Includes multiple dash display configurations for monitoring engine vitals and performance; multiple control functions including two adjustable cooling fan outputs, idle speed, AFR set points, acceleration fuel tuning, ignition control, cold start fuel, and cranking fuel.
( 21 )
$2,945.95
$2,651.36
On Sale
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$2,384.96
$2,119.99
On Sale
Baer Brakes Baer Claw Extreme+ disc brake systems are Baer's flagship offerings, featuring their forged Monoblock calipers mounted to 2-piece rotors. The Extreme+ systems employ current state-of-the-art race technology usually only found in very expensive race calipers. Baer now brings that technology to the road-going market. The 6S line of calipers represent Baer's most aggressive road offering and are suitable for virtually any level of track use. Optional R-Spec 6R calipers are a race version of 6S calipers; available for any Extreme+ system. The R-Spec calipers feature additional machining to the 6S calipers to save close to 2 lbs. per caliper and allow for top-loaded pads. Over 400 models are available for specific vehicle, bolt pattern, and axle applications. Features include: * MonoBlock calipers machined from a single piece of 2618 forged aluminum * The only 6-piston, forged, mono-block calipers offered to the road-going/street market * Stainless steel pistons, abutments, and noise-suppression springs * Staggered piston sizes to minimize pad wear * Uses the common D1247 (DR11) race pad backing plate, shared by many competition calipers * Dual seals (dust/weather and pressure) to meet D.O.T specifications * Caliper can accept 13.5 in. to 16 in. rotors * Machined, hand-painted logos * Available in a variety of powdercoat finishes * Uses correct banjo-style fittings; Baer does not use any pipe thread * Available for front or rear * Offers the exact same look front and rear—the only brake manufacturer that offers this! * Rear systems incorporate a drum-in-hat parking brake * Rear systems for C-clip axles include Baer's Verislide self-centering brackets * Systems include everything needed for each corner, including hoses and fittings (except for general fit applications)
Not Yet Reviewed
$3,599.95
—
$4,094.95
$3,238.95
—
$3,684.95
On Sale
All-Pro's high-clearance dual swing-out rear bumpers feature aggressive style with space-saving storage for your spare tire and extra gear. All-Pro's dual arm design dramatically decreases the clearance radius required, virtually eliminating chances of interfering with anything you may have in tow. Each arm has two open locking positions at 90-degrees and 135-degrees—and the modular bolt-together system means no welding required. The right-side arm can accommodate an oversized spare up to 37 in., while the left- side arm offers numerous storage options like All-Pro's fully compatible swing-out bumper ice chest holder (sold separately). The bumpers are available in bare (raw steel) or black powdercoat versions. Free-up valuable storage space without sacrificing bed accessibility with All-Pro's high-clearance dual swing-out bumper! Features and specs: * Constructed From 3/16 in. ASTM A36 structural steel, 3/8 in. and 1/2-in. thick gussets, and DOM Tubing * Available in bare or black powdercoat finishes * High-clearance design with improved departure angles * 100 percent bolt-on installation * Dual swing-out arms fully sealed greaseable tapered roller bearing hinges * Spare tire arm DOM tubing is .188 wall to reduce vibration and accommodates up to 37 in. tire * Accessory arm DOM tubing is .120 wall and accommodates optional, interchangeable aluminum accessory carriers * Swing-out arm design includes automatically locking slam latches with stainless steel wear plates—each arm locks open at either 90-degrees or 135-degrees * Bumper includes integrated rear-facing LED lights and built-in mounting bracket to relocate the backup camera * If a tow hitch is required, order optional 2005-2015 Tacoma Receiver Hitch—the factory hitch will not work with this bumper! * Includes flip-up license plate holder
Not Yet Reviewed
$2,449.99
$2,082.49
On Sale
Ranger DST30P wheel balancers are efficient, extremely accurate, and are built with a narrower chassis—a perfect fit for smaller garages and shops. These hybrid designs feature a magnetic transducer encoder with twice as many teeth as Ranger's larger model, taking the count from 32 to 64. As a result, they double the number of possible weight placements, meaning more accuracy and better balancing in a space-conscious, cost-effective wheel balancer. Features include: * Direct-Axis drive system keeps balancer running smoothly over time * Digital Sensor Technology--16-digit digital sensor processor and single-chip technology for better speed and accuracy in your readings * Multi-directional quartz piezoelectric load sensors * 64-tooth encoder improves automatic weight optimization * Full-tilt LED display panel * Dynamic, static, and multiple alloy balancing modes are standard * Dual plane calibration for all OEM configurations and performance wheels * Top positioning weight locator * Inside and outside measuring * Millimeter/inches selection * Ounce/gram selection * Manual wheel offset distance setting * Self-calibration function * Auto start when hood is lowered * Wheel holding manual brake pedal * Truck cone/spacer ring adapter set * Wheel calipers * Rear cone mount spring * No-mar rear cone mount pressure cup * Quick-release and mount hub nut
Not Yet Reviewed
$3,595.00
$3,295.00
On Sale
Stainless Works offers turbo header kits for a variety of vehicles and applications—including fitment with AFR and Victor small block heads. In the "down and forward" turbo kits, the header flanges are made with 3/8 in. thick 304 stainless steel, and the tubing is .065 wall 304 stainless steel with 1 7/8 in. primaries and 3 in. slip-fit collectors. 3 in. V-band flanges and clamps are provided and welded on for both headers to crossover connections. Each complete system is TIG-welded and back purged for maximum performance. Kits contain headers, 3 in. x .065 wall 304 stainless steel crossover tube and 3/8 in. stainless steel turbo flange welded onto outlet. Also included: 7-gauge 304 stainless steel turbo mounting bracket, 1/4 in. thick aluminum motor plate, and 304 stainless steel downpipe with is coned from 5 in. to 4 in. diameter with a 90 degree bend and 12 in. minimum length leg on the outlet side. (Customer is required to provide 5 in. V-band flange for welding to inlet of downpipe.) Order the turbo header kit recommended for your vehicle.
Not Yet Reviewed
$3,912.10
$3,294.40
On Sale
Introducing the Powermatic PM2200 Cyclonic Dust Collector with HEPA filtration. The PM2200 pairs the benefits of cyclonic dust collection with the time honored legacy of the Powermatic standard. The all-metal construction provides a stable base for quiet operation and minimal vibration. The Powermatic Cyclone is the only cyclonic dust collector on the market with an Auto-Cleaning HEPA filter. The included HEPA filter traps 99.97 percent of all particles at 0.3 micron. With other market leading features, such as a one-handed drum release lever, vacuum pressure gauge, and frameless dust bag vacuum retention, the Powermatic PM2200 Cyclone Dust Collector is a must for any workshop. Highlights and features: * Powerful 3 hp motor moves 1,543 cu. ft. of air per minute * Integrated vacuum lines in the drum retain the bag without the need for a separate bag frame * Multiple hose mounting options: three 4 in. dust ports or one 8 in. dust port * HEPA filter collects 99.97 percent of all particles passing through as small as 0.3 Micron * Proprietary auto-cleaning HEPA Filter technology for better filtration and longer filter life * Vacuum pressure gauge for greater user feedback while machine is running * One-handed drum release allows for simple removal of the drum for bag changes
Not Yet Reviewed
$4,564.00
$4,107.60
On Sale
aFe Vulcan Series exhaust systems are constructed with mandrel-bent stainless steel tubing for improved exhaust flow. Utilizing factory mounting locations, their bayonet tip hangers ensure Vulcan Series exhausts have an OE-style fit and stay put under any driving conditions. A certified craftsman MIG welds each system by hand for durability and longevity. High-quality band clamps and hardware provide a quick, hassle-free installation, with most applications requiring no modifications. Vulcan Series exhausts fit a variety of light trucks and Jeeps, including some with diesel engines. They're constructed of 304 stainless steel and include black or polished 304 stainless steel tips with a laser-cut stainless steel aFe power badge. Order the model with size specs and other options recommended for your vehicle.
( 3 )
$2,706.90
$2,436.21
On Sale
Dinan offers a wide range of exhaust upgrades for imports like BMW, Audi, and Volkswagen. Their free flow stainless exhaust systems are precision-engineered for optimum power gains—with a civilized, sporty exhaust note that's appropriately aggressive at wide-open throttle. Plus, there's no irritating low-rpm "drone" that is common with so many other aftermarket mufflers. These free flow systems are manufactured from stainless steel, inside and out, for maximum resistance to corrosion and reduced weight (by 30 percent). They utilize the OE brackets and hangers for mounting in factory-like fashion. Order the Dinan free flow stainless exhaust system designed for your vehicle application.
( 4 )
$2,499.95
$2,248.95
On Sale
World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.
( 1 )
$4,549.46
$4,094.51
On Sale
Save time and money with a full All-Pro Off-Road APEX suspension lift kit. These combo kits with Fox coilover shocks and rear reservoir shocks are intended for those who want a complete race-proven suspension system. Front coilovers are adjustable for 0-3 in. of lift, and optional bump stops are available. Each order comes with a pair of All-Pro tubular chromoly upper control arms, extended brakes lines, and a U-bolt flip kit. The Fox 2.5 Factory Series front remote reservoir coilover shocks deliver race-winning performance in a simple direct replacement bolt-on shock. Coilover details include: * Body: 2.5 in. smooth bore and honed seamless alloy bodies * Body plating: Zinc plated and double clear-coated for long lasting finish * External reservoir: 2.5 in. smooth bore 6061-T6 aluminum with hard-anodized black finish * Components: Black anodized, CNC-machined 6061-T6 billet aluminum * Springs: 600 lb. 3.0 Eibach racing springs * Shaft: 7/8 in. hardened NitroSteel steel carbon shafts * Piston: 6061-T6 hard-anodized, high-flow aluminum piston * Valving: Application-specific valving to maximize performance * Seals: Redundant sealing pack system main seal, wiper seal, scraper seal * Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Bearing: PTFE-lined, heat-treated, alloy steel spherical * Mounting: Direct replacement for stock and aftermarket lifts kits * Adjustments: -- Ride height preload ring -- Dual Speed Compression (DSC) adjuster * DSC (Dual Speed Compression): With DSC, you can adjust the shock's high and low-speed compression damping by simply turning the external adjusters -- One pair of All-Pro upper control A-arms are built with tubular chromoly, and include 1.25 in. uniball spacers, polyurethane bushings, and high-strength hardware. Maximum wheel backspacing is 4.50 in. -- One pair of All-Pro Leaf Pack (choose Standard of Expedition). A higher number of thinner leafs provides a smoother, progressive spring rate, compared to fewer, thicker leaves. PTFE anti-friction pads between the leafs provide smoother flex, lessen spring wear, and reduce noise. -- All-Pro Off-Road's U-bolt flip kit turns the U-bolts upside down so the bolt ends face up, away from the rocks. This mod both prevents damage to U-bolt threads and increases ground clearance. The kit comes complete with new heavy-duty U-bolts, plus hardened U-bolt nuts and washers. Tapped plates are also included in every kit. -- The included DOT-approved steel braided rear brake lines are great for your lifted Toyota. They're 24 in. and designed for stock ride up to a 4 in. lift. -- Rear Fox 2.5 Factory Series remote reservoir shocks deliver race-winning performance in a simple direct replacement bolt-on shock. Rear shock details: * Body: 2.5 in. smooth bore and honed seamless alloy bodies * Body plating: Zinc plated and double clear-coated for long-lasting finish * External reservoir: 2.5 in. smooth bore 6061-T6 aluminum is hard-anodized black * Components: Black anodized, CNC-machined 6061-T6 billet aluminum * Spring: 600 lb. 3.0 Eibach racing springs * Shaft: 7/8 in. hardened NitroSteel steel carbon shafts * Piston: 6061-T6 hard-anodized, high-flow aluminum piston * Valving: Application-specific valving to maximize performance * Seals: Redundant sealing pack system main seal, wiper seal, scraper seal * Oil: JM92 Advanced Suspension Fluid for improved performance at variable temperatures * Bearing: PTFE-lined, heat-treated, alloy steel spherical * Mounting: Direct replacement for stock and aftermarket lift kits * Adjustments: -- Ride height preload ring -- DSC (Dual Speed Compression): With DSC, you can adjust the shock's high and low-speed compression damping by simply turning the external adjusters
Not Yet Reviewed
$3,699.99
—
$3,899.99
$3,144.99
—
$3,314.99
On Sale
All-Pro Off-Road Sport suspension lift kits with Bilstein shocks are a price-conscious option that offers great performance on and off-road. The Add-a-Leafs give 1.5 in. of lift to your stock rear springs, while the Bilstein 6112 Series front coilovers (shipped unassembled) can provide up to 2.5 in. of lift. This kit also includes Bilstein 5100 shocks and extended rear brake lines. Order the model recommended for your specific vehicle. Product details: The 6112 Series coilovers optimize off-road and on-road capabilities with a 60mm digressive piston for increased damping control. This kit features an adjustable spring seat, which allows vehicle leveling, larger tires, and increased ground clearance. Features and benefits: * Large 60mm monotube for increased oil capacity, cooling, and long-term durability * 60mm digressive piston for improved ride comfort and control over rough terrain * Custom engineered cold-wound linear springs for enhanced vehicle control * Monotube design for consistent, fade-free performance * Application-specific for maximum performance * Reuses OEM top mount and rubber isolator * Kit includes (2) front 60mm shocks, (2) spring seats, and (2) springs Bilstein 5100 Series rear shocks are designed specifically to help your lifted Tacoma reach its pinnacle in ride performance, while supplying the correct tuning and length for your specific lift. Features include: * Individually engineered for a wide array of specific vehicles and lift combinations * Monotube gas pressure technology * Easy to install; direct bolt-on, no modification required The steel braided rear brake lines are great for your lifted Toyota. Rear brake lines are 24 in. and designed for stock ride up to a 4 in. lift. They are U.S. DOT-approved and exceed all requirements of the Department of Transportation Motor Vehicle Standard MVSS-106.
Not Yet Reviewed
$2,499.99
—
$2,999.99
$2,124.99
—
$2,549.99
On Sale
All-Pro's 2016-current Tacoma dual swing-out bumpers combine an aggressively styled high-clearance bumper with space-saving storage for your spare tire and extra gear, and free-up valuable storage space, without sacrificing bed accessibility. All-Pro's dual arm design dramatically decreases the clearance radius required, virtually eliminating the chance of interfering with anything you may have in tow. Each arm has two open locking-positions at 90-degrees and 135-degrees. The modular bolt-together system requires no welding for installation. The right-side arm can accommodate an oversized spare up to 37 inches, while the left-side arm offers numerous storage options, like All-Pro's fully compatible swing-out bumper ice chest holder (sold separately). More features and specs: * Bumper constructed from 3/16 in. ASTM A36 structural steel, 3/8 in. and 1/2 in. thick gussets, and 1020 DOM tubing * Available in bare (raw steel) or black powdercoat finish * High-clearance design with improved departure angles * 100 percent bolt-on installation * Dual swing-out arms with fully-sealed greaseable tapered roller bearing hinges * Spare tire arm DOM tubing is .188 wall to reduce vibration and accommodates up to 37 in. tire * Accessory arm DOM tubing is .120 wall and accommodates optional, interchangeable aluminum accessory carriers * Swing-out arm design includes automatically locking slam latches with stainless steel wear plates—each arm locks open at either 90-degrees or 135-degrees * Bumper includes integrated rear-facing LED lights and a built-in mounting bracket to relocate the backup camera * If a tow hitch is required, order an optional 2016-Current Tacoma Receiver Hitch—the factory hitch will not work with this bumper! * Includes flip-up license plate holder Note: Although the bare bumper comes fully sanded and ready for paint, please be advised that the mill scale will vary depending on the lot.
Not Yet Reviewed
$2,449.99
$2,082.49
On Sale
Trail-Gear offers fully built Rock Assault front and rear axles made of entirely new parts and customized to your choices. They include everything needed from hub-to-hub, and are expertly assembled by TG's master mechanics. Save yourself time, money, and the hassle of ordering each component separately and then building it yourself. You make the choices and let Trail-Gear do the assembly! Select your kit. Front and Rear Rock Assault fully built axles feature: * 5/16 in. thick, high-strength DOM axle tubes that engage 5/8 in. further into the center section and the 360-degree gusset welded around the tubes on the inside of the housing * Axle tubes have been offset above the housing centerline to allow the inner axles to ride near the bottom of the axle tubes rather than in the center * Increase of 3/8 in. ground clearance under the axle tubing * Heavy-duty, press-formed, 1/4 in. plate steel center section shell is specially shaped to ensure a minimum of 3/4 in. additional clearance under the differential * Differential mounting surface is made from 1/2 in. plate steel Rear axle kit contents and features: * Rock Assault axle housing * Complete rear disc brake kit * Chromoly axle shafts * Bearing pockets * Rear axle bearing service kit * All necessary nuts and studs * Outer offset flanges are made from 4130 chromoly to prevent distortion or bending * Housings are precision aligned using start-of-the-art, 3D digital imaging equipment * Customize each axle to exactly what you need with your choice of: -- Axle width -- Differential Front axle kit contents and features: * Toyota Rock Assault axle housing * Upgraded Longfield 30-spline Birfields * 30-spline chromoly axle shafts * Fully Loaded Six-Shooter knuckle kit * Chromoly spindles * Upgraded brake rotors and calipers * Heavy-duty tie rod and drag link * Trail-Gear's upgraded Trail Safe seals * Super Metal knuckle studs * All necessary nuts, bolts and seals * 59 in. from WMS to WMS * Knuckle balls are forged from 1035 steel * Customize each axle to exactly what you need with your choice of: -- Axle width -- Axle offset -- Differential -- Hubs or flanges
Not Yet Reviewed
$4,599.99
$3,909.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
