Availability
Get your rig ready to rock on! Trail-Gear Rock Assault 9 front roller kits are built with the strength to climb boulders and blaze trails at prices that are hard to beat. The rock-hard housings start with 1/4 in. formed shells, and then a 1/2 in. face plate is attached. DOM axle tubes are welded to the center section with the industry's first 3-point attachment system, giving the tubes superior support and engagement into the center section. These kits are available in a choice of tubing wall sizes. Start or upgrade your build with Trail-Gear Rock Assault 9 kits. Trail-Gear front roller kits come with: * Rock Assault 9 axle housing * Unit hubs (lug nuts included) * Rock Assault 9 knuckles * Rock Assault 9 inner C's * Rock Assault 9 steering arm set * Rock Assault 9 billet aluminum seal housing kit * Rock Assault 9 fully loaded brake kit
Not Yet Reviewed
$4,299.99
—
$4,499.99
Richmond Gear Internal Rail 5-speed transmissions are packed with power and speed. The superior quality is a result of constant research and development, along with extensive testing at Richmond's facilities. These bulletproof transmissions feature aluminum case material. Winners run Richmond, shouldn't you?
Not Yet Reviewed
$3,352.99
—
$3,407.99
USA Standard gear axle shafts are high-quality replacements machined from steel for superior strength and performance. They're available for dozens of differential case design applications, such as AMC, Ford, GM, Chrysler, and Dana. The shafts are offered in nearly a hundred lengths and numerous wheel stud patterns. Order the model recommended for your vehicle.
( 36 )
$2,410.99
Tremec offers a variety of TKX 5-speed manual transmission for select GM and Ford applications. Each model features different gear ratios. Order the transmission best suited for your vehicle. General product details: * Bolts up to a standard GM Muncie bellhousing or use a Quicktime bellhousing * Input Shaft: 26-Spline (requires 26-spline clutch disk) * Output Shaft: 31 Spline * The TKX has 600 lbs.-ft. of torque capacity and is capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. It is available in multiple gear ratio configurations. * Designed for multiple applications with three shifter locations. Compact, end-loaded design provides clearance in most transmission tunnels without floor * Increased case strength with 3-piece aluminum housing provides outstanding structural stiffness (includes main case, intermediate plate and rear extension). Gaskets at all flanges simplifies installation and eliminates fluid * Superior shift-ability through use of multi-cone synchronizers and hybrid synchronizer rings made of sintered bronze and carbon * Noise, vibration and harshness (NVH) minimized with gear layout to best control stress All gears supported by caged needle bearings to reduce end play on the gears. * All gears and shafts made from special grade steel (ASTM 4615), providing increased torque carrying * Equipped with a high performance short-throw billet aluminum shifter that isolates road noise, while providing clean, crisp * Robust design with internal 3-rail shift system and steel shift * Wide gear width increases gear life and torque * Built-in reverse light switch and cruise control safety
( 44 )
$2,999.99
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$3,995.95
—
$4,559.95
Known for robust, superior quality, Tremec T-56 Magnum manual transmissions are brand new from the ground up with a 2.97 first gear. They can withstand up to 700 lbs.-ft. of torque, with gears featuring substantially increased face widths and 2-piece laser-beam welded construction. This allows for greater control of the tooth angles, pitch, and alignment. Additional benefits include: * Bolstered one-piece countershaft to resist distortion * Stronger input shaft * New synchronizers featuring fine-tooth angles * Redesigned shift forks * An extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities
Not Yet Reviewed
$3,545.00
On Sale
BD Diesel Roadmaster transmission and converter packages can provide your truck with superior performance, durability, and redefined reliability and efficiency in every gear. These packages deliver a fully remanufactured Roadmaster with either a remanufactured or modified valve body, a BD deep transmission pan for increased fluid capacity and improved cooling, and a ProForce torque converter. RoadMaster transmissions are designed for longevity and enhanced drivability, and includes key upgrades to outperform stock units while maintaining comfort and efficiency. Select the package designed for your truck.
Not Yet Reviewed
$4,495.00
—
$4,525.00
A 4x4 and traction go hand-in-hand; however, standard (open) differentials allow each wheel to turn independently to eliminate binding in turns. Off-road, this becomes a problem as engine power takes the path of least resistance—to the wheel with little or no traction. Limited slip differentials offer some improvement, but too often the slipping is not "limited" enough to maintain forward progress. Automatic locking differentials also have disadvantages; noisy when disengaging, they can also upset on-highway driving characteristics. Created to provide traction on demand, without sacrificing highway driving performance, ARB Air Locker differentials employ a 12 V ARB air compressor (sold separately) to pneumatically operate a solid and durable locking mechanism inside the differential. When activated, the Air Locker prevents the differential gears from rotating and the axle shafts from turning independently of each other. With both wheels tied directly to the rotation of the ring gear, the vehicle maintains maximum possible traction at all times. When unlocked, it operates just like a conventional open differential. ARB Air Lockers are available in over 100 configurations for a wide range of vehicles and can be installed in both front and rear axles. Installation should be performed by a qualified differential technician, although no special tools or skills are required, apart from those necessary for fitting a standard differential. ARB also offers three compressor models suitable for Air Locker operation, two of which can be used to inflate tires and operate other equipment. Additional features of ARB Air Lockers include: * Vastly improved traction means less reliance on momentum, reducing the likelihood of vehicle damage * Easy, convenient operation without leaving the comfort and safety of the driver's seat * Ultra durable and extremely strong; only the highest quality materials used in construction * Patented gear technology and 2-piece design ensures optimal locking strength * Forged gears provide superior strength and durability * Incredibly simple, yet effective, design employs minimal moving parts for maximum reliability * Thoroughly tested and proven * Most sold as kits with differential, activation switch, solenoid valve, air line, and bulkhead fittings * Front and rear Air Lockers available for most makes and models * For 4WD and 2WD applications * Easy maintenance; no special additives required * Also offered in ARB Traction Packs that include two Air Lockers, a compressor, and accessories for tire inflation
( 11 )
$2,799.95
ACT Mod-Twin 225 heavy-duty twin-disc street clutch kits are designed to tackle aggressive launches and rapid shifting of high powered AWD's—by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a more consistent light pedal feel. The puck-style friction plates, with high-quality organic materials, deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. Clutch kits are available in different styles and other options for fitment on countless vehicles from the early 2000s and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or unsprung mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$2,010.00
—
$2,106.00
Centerforce TRIAD DS clutch kits have been developed for vehicles requiring a holding capacity of 500 to 1,100 lbs.-ft. of torque at the crank. These patented Drive System (DS) multi-disc clutches are smaller and lighter, offering many features and advantages for quick-revving vehicles, and include pressure plate, discs, floaters, flywheel, pilot bearing, bolts, and tool. The billet pressure plate features Centerforce's patented centrifugal weight system (where applicable) for superior clamp load over stock and their patented ball bearing actuated pressure plate (where applicable) provides light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar® full-facing friction material providing increased holding capacity. TRIAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker rpms. Centerforce TRIAD DS clutches are match balanced and ready for installation using the included ARP fasteners. Choose the kit designed for your vehicle.
Not Yet Reviewed
$2,288.95
Quarter Master Optimum-RR Series clutch kits offer the latest in purebred race-clutch technology designed to fulfill the wishes of every modern Camaro, Corvette, or Mustang road racer. They feature either a NASCAR-derived 7.25 in. 2- or 3-disc clutch that is rebuildable and optimized for strength without compromising weight or moment-of-inertia. Each clutch also utilizes the latest in gear-drive technology, with .104 in. race or .250 in. "rally" friction material that allows for quick, smooth shifts, plus slotted pressure plate and floater plates allow for better gas evacuation and superior cooling. Quarter Master Optimum-RR Series clutch kits include: * Optimum-RR Clutch with button-type flywheel * Tri-Lite hydraulic release bearing offering more reliable service and adapter * All necessary hardware, including clutch fasteners and replacement flywheel bolts
Not Yet Reviewed
$2,209.85
—
$2,456.54
On Sale
Spicer Driveline Ultimate Dana 44 AdvanTEK crate axle assemblies offer increased strength and durability in every facet—from thicker bracket mounts to upgraded materials to beefier housing tubes. Strength, versatility, bolt-in convenience, and a rock-solid history: it all comes together harmoniously in the Ultimate Dana 44 AdvanTEK crate axle assemblies from Spicer Driveline. Order the model with the ring and pinion ratio needed for your application. Spicer Ultimate Dana 44 AdvanTEK advantages: * Aggressive nodular iron differential cover * Heat-treated high-grade SAE-4340 chromoly steel axle shaft offers superior abrasion resistance and strength, as well as uniform surface * Thicker steel bracket mounts * Upgraded U-joints outperform the competition, with Nm load ratings of 3000 (1350 Series) and 3600 (1400 Series) * Thicker tubes for added strength * Custom high-clearance housing is designed to optimize extreme off-road performance * Expanded gear ratio options to accommodate different tire sizes * Genuine Spicer AdvanTEK ring and pinion gears for greater strength * Track width is identical to OE track width * No FAD (front axle disconnect) means increased strength * Selectable E-Locker
Not Yet Reviewed
$5,699.99
$5,129.99
Ford Performance Parts Bronco axle assemblies are designed with the latest technology and capability of any axles on the market. Engineered for the new Ford Broncos to not perform on-road, but provide superior strength and durability off-roading as well. Ford Performance Parts Bronco axle assemblies are offered for front or rear positions, available in a variety of gear ratios.
Not Yet Reviewed
$2,206.99
—
$2,826.99
ACT Mod-Twin 225 Extreme twin-disc street clutch kits will provide aggressive launches and rapid shifting of high powered AWD's--by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a consistent light pedal feel. The puck-style friction plates with high-quality organic materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design of these clutch kits allows for quicker shifts and lasting trouble-free service. Different styles and other options are available for vehicle fitment from 2003 and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or rigid mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$2,006.00
ACT Mod-Twin 225 Extreme twin-disc race clutch kits will provide aggressive launches and rapid shifting of high powered AWD's--by combining twice the ceramic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a consistent light pedal feel. The puck-style friction plates with high-quality ceramic materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design of these clutch kits allows for quicker shifts and lasting trouble-free service. Different styles and other options are available for vehicle fitment from 2003 and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style ceramic friction plates * Available with sprung or rigid mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$2,044.00
—
$2,103.00
TeraFlex CRD60 HD semi-float axle assemblies are perfect for replacing bent, broken, or damaged axles in Jeep vehicles including Rubicon models. They can also be used as a direct bolt-on upgrade for Jeep owners looking to beef up the stock axle's weak areas. These rear axle assemblies feature TeraFlex's exclusive Constant Radius Design (CRD) that provides high ground clearance and is unaffected by pinion angle adjustments. They are compatible with all Super 60 gear ratios for extreme-duty applications requiring additional ring and pinion strength, and the heavy-duty axle housings feature smooth profile surfaces, axle tubes, all necessary mount brackets, control arm bushings, and more! A variety of kits are available to cover several Jeep applications. A complete Tera CRD60 HD rear axle assembly with semi-float includes an ARB air locker, a choice of pre-installed Spicer Super 60 ring and pinion gears, as well as Spicer Super 60 bearings, semi-float rear axle shafts, and sensors. Kits are also offered without ring and pinion gears, locker, and carrier. Choose a kit created for your Jeep model. Features: * Factory-style semi-float axle design * 3.25 in. O.D. x 0.375 in. wall DOM axle tube for superior strength verses weight * Fixed spindle mount hub assembly * Tera CRD60 specific high-pinion rear axle housing design * Includes Spicer 1350 Series pinion yoke * Heavy-duty bearing caps increase rigidity and reduce ring and pinion distortion * Built-in "skimmer" cuts ring gear oil halo and forces it into the pinion bearings * Outer pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing * Oversized outer pinion bearing handles increased torque and high-load conditions * High-capacity housing holds maximum amount of oil * Pre-installed inner axle seals * Ductile cast iron housing with increased rib gussets * Heavy-duty ductile iron differential cover with increased cover mounting area * Integrated lower control arm skid plates * High-flow oil passages * Reinforced rear track bar mount with multiple mounting locations * UV protected triple-stage powder coat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped hole on spring perch for bump stop extensions * Retains all ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$4,029.99
—
$5,548.99
ACT Mod-Twin 10.5 Extreme Race clutch kits tackle aggressive launches and rapid shifting of high-powered machines by combining twice the ceramic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process to provide a consistent light pedal feel. Puck-style friction plates with high-quality ceramic friction materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. These kits include a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, rigid mono-drive hub, floater, patented mono-loc collar, release bearing, alignment tool and pilot bearing (where applicable). ACT's Mod-Twin clutches are also fully rebuildable, and replacement discs may be ordered separately. Product features: * Recommended for Drag, Road or Rally Racing * Predictable, aggressive engagement, light pedal effort, quick shifting, possible start-off judder with mild to moderate transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, and premium friction materials ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified
Not Yet Reviewed
$2,056.00
—
$2,361.00
ACT Mod-Twin 10.5 Heavy-Duty Race clutch kits tackle aggressive launches and rapid shifting of high-powered machines by combining twice the ceramic friction surfaces with a no-nonsense solid Mono-Drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process to provide a light and consistent pedal feel. Puck-style friction plates with high-quality ceramic friction materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. The kits include a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, rigid mono-drive hub, floater, alignment tool and pilot bearing (where applicable). In addition, these Mod-Twin clutches by ACT are also fully rebuildable, and replacement discs may be ordered separately. Product features: * Recommended for Drag, Road or Rally Racing * Predictable, aggressive engagement, lightest pedal effort, quick shifting, possible start-off judder with mild to moderate transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, and premium friction materials ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified
Not Yet Reviewed
$2,046.00
—
$2,329.00
ACT Mod-Twin 225 heavy-duty twin-disc race clutch kits tackle aggressive launches and rapid shifting of high powered AWD's—by combining twice the ceramic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a more consistent light pedal feel. The puck-style friction plates, with high-quality ceramic materials, deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. These ACT clutch kits are available in different styles and other options for fitment on countless vehicles ranging from the early 2000's and up. Features and benefits: * Recommended for Drag, Road, or Rally Racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style ceramic friction plates * Available with sprung or unsprung mono-drive hub assembly * Floater * Patented Mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$2,003.00
Advanced Clutch Technology (ACT) Mod-Twin 225 Maxx Extreme twin-disc race clutch kits are available in two styles—Sprung Race and Rigid Race—for a variety of applications, including many Subaru and Mitsubishi models. Here are descriptions of each: * MOD-TWIN 225 XX SPRUNG RACE CLUTCH KIT: Performs aggressive launches and smoother shifting in high-powered AWDs by combining twice the ceramic friction surfaces with an ultra-durable mono-drive sprung hub assembly in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process, providing a consistent pedal feel requiring moderate effort. Puck-style friction plates with high-quality ceramic friction materials deliver high friction coefficient, superior heat capacity, and long clutch life. These plates uniformly transfer torque to a mono-drive sprung hub assembly which extends input shaft life and reduces driveline shock from torsional vibration. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung mono-drive hub assembly, floater, patented Monoloc Collar, release bearing, alignment tool and pilot bearing (if needed). -- Features and details: Predictable aggressive engagement, increased pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise; forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions; delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances; Drag, Road or Rally Racing; Applying tactical engineering to the Mod-Twin, ACT presents unique solutions to common tradeoffs found on twin disc clutches, resulting in an ultra-durable, customer serviceable, long-lasting clutch with very high torque capacity. All are 100 percent clamp load tested, balanced and SFI certified. * MOD-TWIN 225 XX RIGID RACE CLUTCH KIT: Tackles aggressive launches and rapid shifting of high powered AWDs by combining twice the ceramic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process, providing a consistent pedal feel requiring moderate effort. Puck-style friction plates with high-quality ceramic friction materials deliver high friction coefficient, superior heat capacity, and long clutch life. These plates uniformly transfer torque to a mono-drive chromoly steel hub which is heat treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. This kit includes a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, rigid mono-drive hub, floater, patented Monoloc Collar. -- Features and details: Predictable aggressive engagement, increased pedal effort, quick shifting, possible start-off judder with mild to moderate transmission gear noise; forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions; delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances; Drag, Road or Rally Racing; Applying tactical engineering to the Mod-Twin, ACT presents unique solutions to common tradeoffs found on twin disc clutches, resulting in an ultra-durable, customer serviceable, long-lasting clutch with very high torque capacity. All are 100 percent clamp load tested, balanced and SFI certified.
Not Yet Reviewed
$2,004.00
—
$2,108.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
