Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
26 Results Found For "covers"
Showing In Stock Items. Show All 48 Items.
TeraFlex Tera30 HD Front Axle Housings
TeraFlex Tera30 HD front axle housings are heavy-duty with axle tubes, bracketry, and forged inner knuckles, as well as pre-installed inner seals and upper control arm bushings. They are available with or without an ARB air locker, pre-installed ring and pinion gears, and TeraFlex HD ball joints. With the bare HD axle housings, simply transfer your existing internal and outer components to the new housing! Select a kit designed for your Jeep. TeraFlex Tera30 HD front axle: * 3.25 in. O.D. x 0.25 in. wall axle tube increases torsional strength to resist bending * Asymmetric housing design for extra-long tube side strength * Pre-installed inner axle seals * HD forged inner knuckles with greater upper and lower section strength * Ductile cast iron housing with increased rib gussets * HD ductile iron differential cover * Smooth radius bottom design to glide over rocks and obstacles * Integrated lower control arm skid plates * High-flow oil passages and bottom oil drain hole for simple fluid changes * UV protected triple-stage powdercoat for corrosion resistance * 1/4 in. thick CNC laser-cut axle brackets for extreme strength * Integrated factory location upper control arm mount * Pre-installed upper control arm bushings * Proper pinion angle for lifted applications * Pre-tapped or drilled hole on spring perch for bump stop extensions * Retains all factory ESP, ABS, and speedometer sensor capability
Not Yet Reviewed
$2,883.99
Hughes Performance Extreme Towing Diesel Torque Converters
Unleash the power of your diesel engine! Hughes Performance extreme towing diesel torque converters are designed to handle the big power and torque that your engine puts out. They feature extra brazing for increased strength, heavy-duty bearings for greater torque capacity, a triple disk lockup clutch for greater towing capacity, stator modifications for increased torque multiplication, and a billet cover to eliminate converter bow distortion.
( 6 )
$2,055.99
—
$2,328.99
Zumbrota Remanufactured Manual Transmissions
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 20 )
$2,078.99
—
$4,914.99
Hughes Performance Pro-Street 30 Series Torque Converters
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 33 )
$2,548.99
GearStar GM 4L60E Level 3 Transmissions
GearStar GM high performance transmissions are built to the horsepower, torque, and rear gear ratio specs of the engine that it will be matched to. Unlike other high performance transmissions builders, GearStar individual transmissions are hand-built by one technician from start to finish. Before a transmission and torque converter leaves their facility, they are dyno tested for the equivalent of 100 miles, ensuring proper working condition. GearStar GM 4L60E Level 3 transmissions with torque converter are built with the highest quality parts available. "Heart-pounding performance with industry leading experience"; select the proper transmission for your build and "strap yourself in to experience uncompromising performance" with the "legendary road-proven craftsmanship" of GearStar Performance transmissions. Features and specs: * 500 hp * Up to 500 lb.-ft. of torque * Raybestos Stage 1 frictions and steels * TransGo heavy-duty reprogramming kit with Shift Command * Filter * 29-element dual cage sprag * High-capacity upgraded pump assembly * New hardened pump rings * New 10-vane pump rotor * New vanes * New stator * .500 boost valve * Pressure regulator valve * Updated boost valve * TransGo reprogramming shift kit with Shift Command * Bushing kit * New thrust washers * Complete Torrington bearing kit * Heavy-duty hardened sun shell * Heavy-duty expanded capacity input drum with reinforcing sleeve * High-rev spring kit * Corvette servo * High-energy wide bands * New valve body spacer plate * Fill tube and stick * New shift solenoids * New EPC solenoid * New PWM solenoid * New 3/2 solenoid * New manifold pressure switch * New internal wiring harness with new TCC solenoid * New electronic speed sensor * Inspection cover (chrome) * Transmission mount * New OE steel transmission pan
Not Yet Reviewed
$4,945.00
Mantic Clutch USA 9000 Series Twin Disc Clutch Kits
Stock clutches are made for stock horsepower. Mantic Clutch USA 9000 Series twin disc clutch kits are direct replacement upgrades that can handle 1,010 lb.-ft. of torque capacity at the crank and roughly up to 820 to 850 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Engineered for serious performance builds, Mantic 9000 clutch kits are the proven answer to transfer all power to the ground and driving your vehicle with a Mantic Twin is easy, pedal effort remains relatively low, with approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic Clutch 9000 Series twin disc clutch kits with their ceremetallic friction material and all billet construction make them the best for severe duty yet street friendly. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * Completely rebuildable—modular construction makes service easy * 9 in. twin disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
( 2 )
$2,014.00
—
$2,874.00
Chevrolet Performance Transmission Installation Kits
Chevrolet Performance transmission installation kits connect your engine to your transmission. They are available for several applications and each includes flexplate, covers, fasteners, and instruction sheet. Install your transmission with Chevrolet kits.
Not Yet Reviewed
$3,977.44
ACT Mod-Twin 225 Heavy-Duty Twin-Disc Street Clutch Kits
ACT Mod-Twin 225 heavy-duty twin-disc street clutch kits are designed to tackle aggressive launches and rapid shifting of high powered AWD's—by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a more consistent light pedal feel. The puck-style friction plates, with high-quality organic materials, deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. Clutch kits are available in different styles and other options for fitment on countless vehicles from the early 2000s and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or unsprung mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$2,010.00
—
$2,106.00
RAM Pro Street Dual Disc Clutches
RAM Pro Street dual disc clutch kits are precision-balanced for smooth operation—and come equipped with a billet cover for optimum release length, a comfortable pedal effort, and a high diaphragm finger position for excellent high-RPM shifting capability. The sprung hub top disc absorbs shock and reduces driveline noise. Pro Street kits are available with your choice of an organic friction disc or a metallic disc. Organic disc models are capable of handling 500 to 800 hp; the metallic disc models can handle between 600 and 1,200 hp. RAM Pro Street dual disc clutch kits include a billet aluminum, SFI-certified flywheel with a steel insert that has sufficient mass to draw heat away from the clutch without distortion. Some kits are available with a steel flywheel. Order the clutch recommended for your vehicle and engine application.
( 1 )
$2,159.00
—
$2,199.00
Tilton ST-246 Twin Disc Clutch Kits
Tilton Engineering relied upon their 50 years of world-renowned experience in racing clutches to develop the ST-246 twin disc clutch kits for the high-performance street market. These aren't just another run-of-the-mill replacement—they're a true performance twin disc clutch and are available with either sprung-hub organic or solid-hub cerametallic discs, depending on your application. Where the upper limits of OEM-design ends, Tilton ST-246 twin disc clutch kits begin! Order the model recommended for your vehicle application. Features, items, and specs may include: * Precision-machined aluminum clutch cover for high-strength, stiffness, and better balance than OE-type stamped steel covers * High-mass main pressure plate and floater plate resist warpage and offer high-heat capacity * Heavy-duty straps attach plates to minimize noise and provide clean clutch release * High-strength/durability billet chromoly steel flywheel with precision register for optimal balance * Compatible with most OEM release bearings or Tilton's hydraulic release bearings * Sprung-hub organic option: less vibration/noise, smoother engagement, up to 850 lbs.-ft. of torque * Solid-hub cerametallic option: higher strength, more precise engagement, up to 1,250 lbs.-ft. of torque
( 9 )
$2,006.00
ACT Mod-Twin 225 Extreme Twin-Disc Street Clutch Kits
ACT Mod-Twin 225 Extreme twin-disc street clutch kits will provide aggressive launches and rapid shifting of high powered AWD's--by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a consistent light pedal feel. The puck-style friction plates with high-quality organic materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design of these clutch kits allows for quicker shifts and lasting trouble-free service. Different styles and other options are available for vehicle fitment from 2003 and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or rigid mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.
Not Yet Reviewed
$2,006.00
PEM Racing Black MAX Dirt Late Model Quick-Change 1-Ton Rear End Housings
PEM Racing introduces its newest and strongest quick-change rear-end, the black MAX Dirt late-model 1-ton aluminum housing. The 8-rib side bells and 1-ton tubes have been tested to have less flex. These quick-change rears have lower rotating friction and will disperse heat better. They're available for Rocket XR1 and Longhorn Circle Track chassis. Additional details: * Thermal coated black outside of bells and center housing * REM finishing of ring and pinion, bearings and races for reduced friction and heat * Drilled aluminum spool for reduced rotating weight * Black anodized aluminum one-ton tubes T6061 with 1-ton snout nuts * New PEM 8-rib side bells (stronger and less flex) * Magnesium / aluminum alloy castings * Drilled aluminum spool * Gun-drilled heat-treated lower shaft * Roller pinion nose bearing * Posi locking nut on pinion * Forged steel 1310 yoke * Vent tube * Steel core cover gasket * 5 longer thru-bolts for suspension component attachment
Not Yet Reviewed
$2,845.99
Trail-Gear Assembled Third Members
Trail-Gear assembled third members are off-road strong! These units are built with all-new housings and internal parts and are delivered ready for you to drop into your axle. TG assembled third members feature top-quality ring and pinion gears, lockers, solid pinion spacers for long gear life, and they include triple-drilled flanges to cover common driveshaft patterns. The V6 units feature larger OEM-style V6 gear sets with longer pinion gear. Choose your locker style, case style, and gear ratio for off-road performance from Trail-Gear's selection of assembled third members.
( 2 )
$2,099.60
—
$2,722.67
Quarter Master V-Drive Clutch and Bellhousing Kits
These Quarter Master V-Drive clutch and bellhousing kits offer the best balance of performance, durability, and affordability for the money. They feature an open cover, an 8-leg design for maximum strength and cooler operations, and a reduced moment of inertia for lightweight power transfer, making them perfect for sportsman Circle Track, road course, and off-road racers. Their premium internal friction materials can handle high-torque capacities. The kits also include: * CAD-designed, CNC-machined aluminum or magnesium bellhousings * V-Drive clutch system with button * Steel flywheel * Flywheel bolt kit * Reverse mounted Ultra-Duty Quarter Master starter * Fixed mount hydraulic release bearing with clutch inlet and bleed line kit * Racer-rebuildable frictions and floaters to provide extended service life
( 1 )
$2,027.56
Quarter Master Pro-Series Clutch and Bellhousing Kits
The staple of the Quarter Master clutch lineup, the Quarter Master Pro-Series clutch and bellhousing kits, are proven to offer unsurpassed performance and durability for racing and endurance applications. Their design provides a greatly reduced moment of inertia, making them the perfect option for road, speedway, and short track racing. The kits feature a CAD-designed bellhousing that is precision CNC-machined to ultra-tight tolerances for long-lasting durability. The included Pro-Series clutch is available in different sizes and offers either steel or aluminum covers, as well as different friction disc options. All Quarter Master Pro-Series clutch and bellhousing kits include a bellhousing, a Pro-Series clutch with a button and steel ring gear assembly, a flywheel bolt kit, and a fixed hydraulic throwout bearing with a clutch inlet and bleed line kit.
Not Yet Reviewed
$2,337.17
RevMax Stage 5 Billet Quad Clutch Insignia Converters
RevMax offers Stage 5 Billet Quad Clutch Insignia Converters for a variety of applications, including many Ford trucks from 2011 and up. These torque converters are designed for those who have heavily modified engines or for those who tow heavy weights. They're the culmination of over two years R&D. Each converter features four lockup clutches and retains the factory damper assembly to provide extremely smooth converter apply. Even with twice the holding capacity of a stock converter, most RevMax customers rate these quad units as smooth as their original stock dual disc. RevMax Stage 5 converters have no horsepower or torque limitations. Additional details: * CNC-machined billet one-piece front cover * Raybestos or Alto, high performance quad disc lockup friction * RevMax proprietary CNC-machined stator designs * Billet bearing cap * Dual Torrington Bearing stator design * 4140 flanged impeller hub * 4140 hardened turbine hub * Furnace brazed impeller * TIG-welded brazed turbine * Computerized robotic welding * Precision internal clearances set to increase efficiency and improve performance * Fully pressurized and leak-tested * TCRS computerized high-speed balancing to less than 5 gram * Runout tolerances of less than .005
Not Yet Reviewed
$2,195.00
South Bend Clutch Stage 3 Drag Race Clutch Kits
South Bend Clutch Stage 3 drag race clutch kits are powerfully built with heavily modified vehicles in mind—particularly those built for 1/4 and 1/8 mile tracks. They include a single mass SFI-approved flywheel with each kit, which is typically required for drag racing when the original design is dual mass. The pressure plate is race cover engineered to keep the clutch pedal travel short and quick. South Bend Clutch Stage 3 drag race clutch kits are recommended for drag racing, pulling, and drifting. Order the clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc reduces rotational mass and is assembled with all high-carbon components for maximum strength * Graphite-impregnated ceramic friction material perfectly suited for drag racing (maximum friction co-efficient, rapid heat dissipation, and abrupt engagement characteristics) * Meticulous processing and advanced packaging materials
Not Yet Reviewed
$2,211.69
—
$3,841.26
Mantic Clutch USA Triple Disc Clutch Kits
Stock clutches are made for stock horsepower. Mantic Clutch USA triple disc clutch kits should be your choice for any big horsepower build, handling 1,515 lb.-ft. of torque capacity at the crank and roughly up to 1,250 to 1,285 lb.-ft. at the wheels (capacity will vary with use and type of power adder being utilized). Perfect for supercharger, nitrous, or turbo performance builds, Mantic triple clutch kits, with their ceremetallic friction material and all-billet construction, are more durable yet very friendly for everyday driving. Pedal effort remains relatively low, approximately 12 to 15 percent increase over the OE clutch pedal feel. Available for many applications, Mantic triple disc clutch kits are modular in construction offering ease of service and complete rebuildability. Features and benefits: * SFI approved 1.1 * All billet construction * No Flex at high rpms * High-torque capacity * Lightened flywheel revs quicker compared to heavier OE flywheels * 9 in. triple disc clutches reduce Moment of Inertia (MOI) for quicker more precise shifts * Ceremetalic friction material offers more heat resistance * OE hydraulic release bearing * All necessary hardware * Cover and components machined from billet stock adding strength and durability
Not Yet Reviewed
$3,472.00
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$2,299.99
TCI Maximizer 4x4 Transmissions
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 31 )
$2,122.95
—
$2,210.95
VEGE Remanufactured Automatic Transmissions
VEGE Remanufactured automatic transmissions enable you to get back on the road quickly—without breaking the bank! With its advanced and efficient production process, backed by more than eight decades of experience, VEGE is able to supply remanufactured automatic transmissions with a level of quality that equals that of new OEM products at extremely competitive prices. The parts are carefully inspected, cleaned, and then fully machined and assembled with top-of-the-line components. Thousands of models are available, with aluminum case, torque converter included, and gear options from one through eight. Includes fluid. Get your vehicle shifting into gear with a reman auto-trans from VEGE.
( 7 )
$2,245.99
Yukon Gear & Axle Ring and Pinion Gear and Differential Combos
Yukon Gear & Axle ring and pinion and differential combos save time and money by including everything you need in one simple part number. Pro Kits feature a premium Yukon ring and pinion gear set, Yukon Master install kit with high-quality Timken bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the Yukon Gear & Axle ring and pinion gear and differential combo designed to fit your application.
( 4 )
$2,087.99
—
$2,636.99
Zumbrota Remanufactured Axle Assemblies
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$2,399.99
—
$4,914.99
USA Standard Gear Ring and Pinion Gear and Differential Combos
USA Standard Gear ring and pinion and differential combos save time and money by including everything you need in one simple part number. Quick Kits feature a USA Standard ring and pinion gear set, Master Install Kit with high-quality Koyo bearings, and required small parts to get vehicles back on the road quickly. The gear and install kits include axle bearings and seals. Many of these combo kits include Dura Grip differentials, depending on application. Order the USA Standard Gear ring and pinion gear and differential combo designed to fit your application.
( 4 )
$2,041.99
—
$2,381.99
