Tools & Shop Equipment - electrical KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

On Sale

AEM Electronics EV Combined Charging Units

AEM Electronics EV combined charging units (CCU) simplify the electric vehicle (EV) drive system. The units merge an on-board charger (OBC) and a DC-DC converter (DCDC). The OBC charges the HV battery pack by taking 120 V or 240 V AC energy from the grid, converting it to high-voltage DC and charging the high-voltage battery in the vehicle. The DC-DC converter takes the high-voltage from the battery pack and converts it to low-voltage to maintain the charge in the vehicle's 12 V battery, and performs the duties that the alternator does in an internal combustion engine (ICE) vehicle. The combined charging units are fully controlled by the VCU via the CANbus and the OBC and DC-DC report voltage, current, and status information back to the VCU. The AEM EV CCUs are very compact and lightweight, while offering high efficiency, stable charging, long life, a high-protection level, and high reliability. They are 100 percent driven via CAN by the VCU in conjunction with the BMS-18, and is not directly controlled by the charge plug connector or the off vehicle EVSE (Electrical Vehicle Service Equipment). Features: * 6.6kw (32 amps) on-board charger + 2.5kw DC-DC converter * 350 Vdc nominal output and up to 450 Vdc maximum * Plug-and-play with AEM's EV controls * Liquid cooled and temperature controlled for efficient thermal management * Lightweight (5.5kg, 12 lbs.) compared to typical units at 18 to 24 lbs. * Compact design--2.5 to 3x smaller than comparable units * The HV battery charger is rated at 93.5 percent efficiency at full load * The DC-DC LV output is rated at 91.5 percent efficiency at full load with a maximum continuous DC-DC output of 178 amps at 14 V * The CCU has the following protection functions: -- Input over and under voltage protection -- High-voltage output over and under voltage protection -- High- and low-voltage output short circuit protection -- Over temperature protection

Not Yet Reviewed

$2,817.95

$2,535.95

OTC Vanguard 2-Stage Electric Pumps

The OTC Vanguard 2-stage electric pumps are ideal for a wide range of applications including clamping, bending, straightening, pressing, forming, testing, pushing, and pulling. They provide fast ram approach and return with a low-pressure, high-volume stage, and then automatically switch to a high-pressure, low-volume stage for high force requirements. This design allows for efficient performance in various hydraulic applications. These pumps are designed to be compact and easy to handle, making them convenient for various work environments. Product features: * Built with robust materials for long-lasting performance in demanding conditions * Fast-acting precision-built two-stage pumping unit consisting of a gear pump for the low-pressure stage and an axial-piston pump for the high-pressure stage * Delivers low volume at high-pressure yet provides high-volume at low-pressure for fast cylinder piston approach and return * Suitable for operation up to 10,000 psi * 2-stage hydraulic pump with 2-position/3-way valve * 6 ft. remote motor control

Not Yet Reviewed

$4,708.99

JET Trademaster 1/2 Ton Electric Hoists

JET Trademaster Series 1/2-Ton electric hoists combine safety, portability, and durability to operate in all your industrial, construction, and transportation applications, making one-person jobs possible by offering precise, variable-speed control via a wireless remote, reducing strain, and enabling work in tight spaces. Key features like the brushless motor, overload protection, and a compact design enhance durability and operator safety, minimizing manual effort and helping prevent accidents. Product features: * Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4 ft./min. with speed dial and max of 41 ft./min. in high-speed * TAA Approved * Single-phase 120 V plug enables use in all areas, and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10 amp * Overload protection using slip clutch system to protect hoist from loads overrated capacities * DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs * 30 / 7.5 Time ratings * Electronic controls have protections on them with ten failure codes that are shown on wireless pendant for troubleshooting * Low noise at less than 75 dBA * 1/8-to-1/2-Ton models come in plastic carry case for ease of transport from job-to-job

Not Yet Reviewed

$4,707.99

iDEAL Equipment Electric/Hydraulic UTV Lift Benches

Designed to fit the largest UTVs, iDEAL Equipment electric/hydraulic UTV lift benches feature a 2,200 lbs. capacity, along with a 65 in. x 88.6 in. platform. Featuring newly designed drive on pivot ramps that fold down and out of the way to become wheel stops. While an innovative retractable center ramp slides out of the way making for a safe, unobstructed workspace. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV lift benches UTV side extensions incorporate innovative center drop panels providing unmatched service access, including motorcycle service, without removing the extensions. A single point hand-held pendant controls raising or lowering the bench, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 65 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,920.00

AutoMeter Heavy-Duty Automated Electrical System Analyzers

AutoMeter heavy-duty automated electrical system analyzers work on most 6 V and 12 V batteries, including AGM, battery banks (up to 4 batteries), and 24 V systems. Due to their 400 amp true load system, they can apply a load through the tester for quick readings on the alternator, battery, starter, connections, and wiring. The testers feature Digital Pulse Load technology, allowing operators to quickly evaluate cranking power—as well as V-drop technology, which measures voltage drop associated with starter engagement. This product also connects to AutoMeter's truck/trailer adapters (available separately) to quickly assess all electrical issues. They run on their own 6 V SLA battery which recharges internally whenever the cables are hooked to a battery.

Not Yet Reviewed

$3,662.99

iDEAL Equipment Electric/Hydraulic ATV Lift Benches

iDEAL Equipment electric/hydraulic ATV lift benches are up to the challenge of lifting all ATVs on the market today. Featuring a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises and become wheels stops. Keeping the safety of the technician in mind, a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. Long x 50 in. wide * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,410.00

iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches

iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$3,770.00

iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches

Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,070.00

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$3,284.00

—

$4,569.70

iDEAL Equipment Single Post Service Lifts

iDEAL Equipment single column service lifts are innovative 2,000 lb. single column, high-rise, multi-use storage and service lifts, incorporating a multi-adjustable platform design with multi-directional front and side vehicle loading for most ATVs, UTVs, golf carts, and riding and zero-turn mowers. The low-profile platforms incorporate spring-loaded quick-release/locking nylon rollers and brackets mounted to the underside of each platform, making adjustments of the platform's width fast and easy. Each platform is secured to the bolster via HD lock pins and retainer brackets once the desired platform width is set. For additional space saving benefits, the power unit can be easily mounted to either the front, side, or rear of column providing the best fit in your shop or garage. In addition, the iDEAL single column UTV and mower storage/service lifts come standard with a durable powdercoat finish, eight multi-position side ramps, wheel stop "pivot" ramps with protective nylon rollers, and quick removal tubular wheel stop bars for platform sides. Easy lift operation is provided with a high-quality electric/hydraulic 115V DURO power unit, a HD hydraulic chain-drive cylinder, and a single-point manual lock release with 20 different locking height positions.

Not Yet Reviewed

$4,890.00

On Sale

Ranger RP-30FCH Oil Filter Crushers

The Ranger RP-30FCH oil filter crusher applies 30,000 lbs. of crushing force against used oil filters that need to be completely drained of residual oil. The units manual stainless steel handle is ergonomically placed on the side of the crusher to safely manage its two-way stop-and-start operation. Save on waste disposal costs and storage space for your shop with the RP-30FCH oil filter crush press from Ranger Products. Specifications of the Ranger RP-30FCH oil filter crushers: * Welded steel plate construction * Electric-hydraulic power unit features 2 horsepower motor * Spring-loaded shutoff switch stops operation when door is opened * Transparent door for a convenient view of the crushing process * Powered by a 2 hp electric-hydraulic pump with 2-gallon reservoir * Rugged floor stand is designed to accommodate up to 55-gallon drums for efficient fluid handling * Maximum crushing pressure of 30,000 lbs. * Filters are reduced to 20 percent of their original size with 95 percent of residual oil removed * Fulfills EPA and other mandated environmental standards * Saves on waste disposal costs and storage space * Cycle time approximately 8 to 15 seconds, depending on filter size * No-mess design operates clean and efficiently to lessen spill hazards * Ergonomic controls feature manual cycles

Not Yet Reviewed

$3,095.00

$2,895.00

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$3,933.70

—

$4,980.00

Tuxedo SC-2K Single-Post Platform Storage Lifts

Create extra space in your garage for your lawn mower, a motorcycle, snow-mobile or anything else you want to get out of the way with the Tuxedo SC-2K single-post platform storage lifts. These single column lifts take up a minimum of space while offering a maximum storage solution. Additional details on the single-post platform storage lift: * Up to 2,000 lbs. capacity * Fits in most residential garages * Minimal space, maximum storage * Park under platform * Large storage platform * 58 in. of clearance under platform * Runs on regular 110 VAC * Optional motorcycle vise adapter

Not Yet Reviewed

$2,862.99

Generac XD Series Portable Generators

If you've got a tough job, employ Generac XD Series portable generators to get it accomplished with power to spare. They're designed with a diesel engine, built with a robust steel frame, and engineered with a large fuel tank to keep on running until your workday ends! No job is too tough and no day too long for Generac XD generators. Features and benefits include: * 6 percent total harmonic distortion—smooth operation of tools, appliances, even sensitive electronics * Integrated lifting eye allows for easy transport and security on the jobsite * 12-gallon fuel tank provides a long run-time of 32.4 hours at 50 percent load * Yanmar LW Series 435cc air-cooled direct injection, industrial-grade diesel engine * 1 1/4 in. steel cradle for added strength and durability

Not Yet Reviewed

$4,249.00

EMAX Industrial Silent Air Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial Silent Air piston compressors are quiet. One of the most common complaints about compressors is noise. EMAX Silent Air units not only quiet the noise, they also do it with big cfm output and lower rpm. Featuring their Whisper silent air system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and prefilter media within the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer; plus, it provides secondary filtration for cleaner air. Industrial Silent Air compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Silent Air compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. Their 15 Service Factor means the motors can be pulled 15 percent over full load. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

3.0 out of 5 stars ( 1 )

$2,927.10

—

$4,424.60

PRW Low-Profile ETS Accessorized Engine Test Stands

PRW low-profile ETS accessorized engine test stands are the first U.S. patent collapsible design manufactured with standard parts and readily available replacement parts from the manufacturer. For the small shop or race trailer, the ETS engine test stands are a real space-saver when collapsed. The stands are available as a base unit for the do-it-yourselfer, or accessorized with a radiator, electric fan, fuel cell, momentary starter switch, on-off switches, pre-drilled instrument panel, oil pressure gauge, water temperature gauge, and 0-8000 rpm tachometer. These low-profile ETS test stands are designed to accommodate most engines and are built to meet the demands of high-output racing engines and heavier big blocks—taking mobile engine test stands to a new level of functionality.

Not Yet Reviewed

$2,511.14

Tuxedo PL6K Low Rise Pit Lifts

Tuxedo PL6K low rise pit lifts feature an open-center design and heavy-duty locking system with 15 positions. Their low-profile, dual-approach layout makes them ideal for a variety of applications, and the electric motor helps these lifts achieve a 6,600 lbs. lifting capacity. When a run-of-the-mill system isn't going to get the job done, get your vehicle lifts from a company known for their commercial-grade reliability and toughness by ordering Tuxedo PL6K low rise pit lifts. More product features include: * Pneumatic lock release * Surface mounting * Electric/hydraulic power system * High-density rubber lifting blocks * No crossmember * Gear-driven valve for smoother lifting Specifications: Lifting height (without lift blocks) – 26 1/8 in. Lifting height (with lift blocks) – 27 5/8 in. Pad length (overall) – 53 in. Overall width – 18 in. Overall length – 83 1/4 in. Lowered height – 4 1/4 in. Motor – 110-220 VAC, 60 Hz

Not Yet Reviewed

$3,792.99

BendPak LR-60 Low-Rise Lifts

When you need to add versatility and productivity to your shop or garage, your first stop should always be a BendPak vehicle lift. Simple, safe and rugged, this rubber-topped low-rise BendPak lift can handle a mighty 6,000 lbs. load without hogging your precious floor space. The BendPak LR-60 lift is the ideal solution for quick service on today's passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles. All in all, the LR-60 is perfect for servicing cars and light trucks. For even more adaptable versatility, the included solid rubber lift blocks can be positioned in a variety of pick-up points on unibody and frame-contact undercarriages. Additional features include the following: * Electric / hydraulic power system * Multi-position safety locks * Rubber lifting blocks included * Dropped cross bar for added clearance • Heavy-duty steel channel frame

5.0 out of 5 stars ( 1 )

$3,495.00

iDEAL Equipment Commercial Low-Rise Pad Lifts

iDEAL Equipment commercial low-rise pad lifts are designed for cars, SUVs, vans, and trucks. The 10,000 lb. lift includes the latest in design and safety features, including twin hydraulic cylinders, three locking height positions with dual latch releases, durable rubber contact pads, protective hose covers, and outer drive-over fixed platform frame This allows for wheel service repairs for a wider range of vehicles, including uni-body vehicles using the included multi-height adapters and rubber pads. The versatility of the pad lift design allows vehicles to be driven-on the pad lift in either direction, while also having the ability to position the hose and power unit to either side of the pad lift, allowing for the best fit in a shop or garage. Easy lift operation is provided with a high-quality electric/hydraulic 115 V DURO power unit, mounted to a pedestal post combined with dual point manual lock release.

Not Yet Reviewed

$4,590.00

OTC 10-Ton Capacity Air-Operated Oil Filter Crushers

OTC's 10-ton capacity air-operated oil filter crushers offer many benefits, primarily focused on efficiency, waste reduction, and environmental responsibility in the disposal of used oil filters. They streamline the disposal process, help to reduce waste volume, improves workplace efficiency, promotes environmental responsibility, and enhances safety. Key features and advantages include: * Air-operated system allows technicians to work hands-free, improving safety and reducing strain * Automates the crushing of oil filters, saving time and reducing manual labor * Compacts filters, minimizing the space needed for storage and disposal, and lowering disposal costs * Crushes up to four automotive filters at one time, in just 20 seconds * 100 percent air operation eliminates electrical connections, simplifying setup and operation * Large crushing chamber easily accommodates various sizes of automotive spin-on filters

Not Yet Reviewed

$4,248.99

Powermatic 15 in. Bandsaws

Powermatic band saws are designed to easily cut curved, circular, and straight lines quickly and easily. Powermatic 15 in. bandsaws pack many of the features traditionally only found on larger bandsaws and brings them to a new, category-redefining 15 in. size. As with every product Powermatic builds, the PM1500 pushes the limits of design, innovation, and durability--truly "The Gold Standard". Features include: * Blade tension release with electrical interlock prevents the bandsaw from starting when the blade is de-tensioned or released * Fence features positive locking cam with pressure adjustment * Heavy-duty upper wheel support and tracking mechanism for smooth operation * High-end blade guides with toolless adjustment provide stability, increasing cut accuracy * Oversized side plate can be used in the horizontal or vertical position * Solid cast iron upper and lower wheels create the momentum needed for heavy re-saw * Accu-Fence has complete adjustability for aligning to blade and squaring to table

Not Yet Reviewed

$4,179.00

BendPak LR-60P Low-Rise Portable Lifts

BendPak LR-60P low-rise portable lifts are just the right size to be moved around the shop to lift and raise vehicles. When you need to add versatility and productivity to your shop or garage, your first stop should always be a BendPak vehicle lift. Simple, safe and rugged; this rubber-topped low rise BendPak lift can handle a mighty 6,000 lbs. load without hogging your precious floor space. These lifts are ideal for quick service on today's passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles. Additional features include the following: * 6,000 lb. lifting capacity * Electric/hydraulic power system * Multi-position safety locks * Rubber lifting blocks included * Dropped cross bar for added clearance * Heavy-duty steel channel frame * 110-220 VAC motor * 35-second lifting time

4.33 out of 5 stars ( 3 )

$3,595.00

Tuxedo LR-26-PAD Low-Rise Pad Lifts

The Tuxedo LR-26-PAD low-rise pad lifts provide quick and easy lifting. This lift model raises to a comfortable working height for technicians to perform most brake and tire work and are just as helpful for body work and other detailing. Rubber lift blocks are also included that can be placed on the lift pad surface to meet up with the auto frame contact points. The electric motor powers a hydraulic pump, with lines running to the lift structure hydraulic cylinder. You don't have to sacrifice quality for an affordable garage lift, thanks to Tuxedo LR-26-PAD low-rise pad lifts. Key features: * Lifting capacity: up to 6,000 lbs. * Dolly mounted power unit * 115 V -15 amp -1ph motor—raises car to full lifting height * Lifting height 26 in. without lift blocks, 30 inches with rubber lift block adapters * Automatic safety lock—automatically engages * Rubber riser spacer blocks included to get at difficult to reach vehicle frame jacking contact points * Excellent for tire and wheel service * Optional MR6K-38-SUV adapter kit is available for frame lifting (sold separately)

Not Yet Reviewed

$3,333.99

Baileigh Industrial R-M10E Manual Roll Benders

For fabrication shops that need a little more production that the R-M10 can provide, Baileigh Industrial R-M10E manual roll benders are the answer. These electric ring rollers can prove to be life savers. Features and benefits: * 220 V 3-phase * Maximum capacity of 1.25 in. (.078 in. wall) mild steel round tubing and 1 in. schedule 40-pipe capacity * Open-face design allows you to roll full circles * Manual drive includes reduction gearbox to cut down on physical effort * Comes equipped with various segment rolls for different types of flat bar, angle iron, and square tubing * Hardened rolling shafts turn on bronze bushings, ensuring that the machine will last for years and wear well * Cast steel head, machined to exacting tolerances, maintains accuracy when bending at full capacity * Machine base opens to a handy storage cabinet * Many optional sizes of tooling are available for round tube and pipe, among other profiles * Backed by Baileigh's 1-year parts warranty and lifetime technical support

Not Yet Reviewed

$4,149.99

26 Results Found For "electrical"