Availability
Showing In Stock Items. Show All 10 Items.
BendPak steel approach ramps make it easier to get your low-profile car on to the lift without risk of damage. Their ramps offer heavy-duty construction, extended lengths, a low-rise design, a textured surface for better tire grip, and extra width to support big wheels and vehicles. BendPak ramps include brackets and necessary hardware to set them up. Choose a pair of ramps designed for your BendPak lift.
( 1 )
$4,295.00
On Sale
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$4,554.82
$4,327.08
On Sale
The BendPak RBJ15000 rolling bridge jacks are made for the HDS-35 four-post lift—which is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy access to the undercarriage but can't get to the wheels. BendPak rolling bridge jacks open the door to new service opportunities, such as wheel balancer, wheel alignment and tire changer equipment. BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars. The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak's exclusive, optional airline kit. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy! Additional product features: * 15,000-lb. lifting capacity for full wheel service capability * Steel contact pads standard—the jack is low-profile, so the pads fit comfortably underneath low-stance vehicles * Three safety-lock positions—raise your jack to three different heights—whatever is most comfortable for you! * Easy-roll wheels * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$5,695.00
$5,245.00
BendPak LR-60P low-rise portable lifts are just the right size to be moved around the shop to lift and raise vehicles. When you need to add versatility and productivity to your shop or garage, your first stop should always be a BendPak vehicle lift. Simple, safe and rugged; this rubber-topped low rise BendPak lift can handle a mighty 6,000 lbs. load without hogging your precious floor space. These lifts are ideal for quick service on today's passenger cars and light trucks. With wide rubber pads, wheel service and auto-body repair can now be performed on a surprisingly large variety of vehicles. Additional features include the following: * 6,000 lb. lifting capacity * Electric/hydraulic power system * Multi-position safety locks * Rubber lifting blocks included * Dropped cross bar for added clearance * Heavy-duty steel channel frame * 110-220 VAC motor * 35-second lifting time
( 3 )
$3,595.00
H&S Autoshot HSM 200 Multi-MIG synergic welders are professional systems that provide 200 amps of power for MIG, TIG, and stick applications on either a 115 or 230 V line. They feature voltage, wire speed, amperage, and full synergic scroll-down settings for steel, aluminum, and silicone bronze on a LCD display. The spool gun selection switch, euro-connect flange for torch and spool gun, and lift-arc start foot pedal connector are standard. These kits include: a synergic inverter power supply, 10 ft. HSL 15 torch, 10 ft. 200 amp electrode holder, 12 1/2 ft. HSM 17 TIG torch, 10 ft. 200 amp earth clamp, 12 1/2 ft. foot pedal control, gas regulator with hose, steel welding wire, AK-2 kit, and an operators manual. An optional aluminum spool gun is available separately.
Not Yet Reviewed
$2,154.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
