Availability
On Sale
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,499.95
$2,248.95
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$2,249.95
—
$2,499.95
Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,044.00
Haltech offers a variety of engine management systems, including the Elite 2500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 2500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software * Outputs: Up to 8 injector and 8 ignition * Suits: Recommended for 4, 6, 8-cylinder, Drive-by-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts * Includes: Elite 2500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. USB programming cable and USB Software Key * Notes: Top of the range, two-connector ECU. Ideal for popular late model performance and racing applications.
Not Yet Reviewed
$2,409.00
—
$2,588.00
American Autowire Classic Update Series wiring systems power up your classic ride! Modifying your vintage muscle with modern amenities is beyond the capabilities of OE wiring. These harness kits let you keep the retro looks and enjoy power accessories like air conditioning, windows, and fuel injection. The assemblies are year/make/model-specific for a professional fit and are offered in over 60 different kits. Updating your classic has never been easier! Classic Update Series details: * Longer length wire allows for stock or custom routing * ATO-style fuse panel and more circuits * Full color schematics and instructions * Ignition, headlight, and dimmer switches (most kits) * Upgraded 8-gauge wire for alternator, fuse link protection, gauge cluster options, and disconnect * Pre-wired fuse panel mounts in the stock location
( 557 )
$2,564.05
Adding the WinMax nitrous controller to your Corvette is a user-friendly task with these plug-and-play harnesses. Nitrous Outlet Corvette Pro WinMax wiring harnesses feautre a through-tunnel design that adds protection to the harness from the elements, while making installation quick and easy. They include full color detailed installation instructions, colored diagrams, pin out locations, and the necessary mounting hardware. Additional features and contents: * Harness routing instructions * Detailed colored wiring diagram * Individual labeled wiring leads * Molecular structure protective sheathing * Pre-terminated Deutsch connectors * High-quality Molex terminals * LED indicator fuse panel * Beuler 40/60 amp relays * Easy-access relay center * Dual stage system operation * Remote bottle opener * Bottle heater, purge * Dedicated fuel system * Two ignition retard outputs * Fuel pressure safety switch * Nitrous pressure sensor
Not Yet Reviewed
$2,104.99
On Sale
COBB Tuning Porsche Accessport V3 computer programmers are the most flexible, and easiest to use ECU upgrade solutions for your sports car. They will unlock power hidden within your vehicle by replacing conservative factory settings with more aggressive calibrations. And you can upgrade forever with off-the-shelf (OTS) calibrations for most bolt-on modifications. The Accessport V3s will be the last engine management solution you'll ever need. Programmers are also available with PDK flashing, and will allow you to tune both the engine and transmission control units in your supported Porsche. Order the unit designed for your year, model, and engine application. Features and benefits include: * Larger, full color, higher resolution screen * Able to monitor up to 6 parameters in real time * Customizable multi-gauge display * COBB tuning is included, with enough space for 100 calibrations * In-vehicle mount with on/off switch * Interchangeable faceplates
( 1 )
$2,540.00
—
$3,595.00
$2,159.00
—
$3,055.75
The AiM Sports MXG 1.3 dash data loggers offer a comprehensive and flexible solution for data acquisition and display, enabling drivers and teams to monitor, analyze, and improve their performance on the track. With a high contrast TFT display, which is fully configurable, you can create and customize pages/displays to suit your requirements using different fonts and dimensions for all the information received by the dash logger. Swapping through the pages is managed by pushing one or two push-buttons. An ambient light sensor keeps the backlight at optimum brightness levels. Give yourself an edge above the competition with AiM Sports MXG 1.3 data loggers. They'll provide you with the knowledge you need to improve your performance and cross the finish line victorious. Product overview and key highlights: * The MXG display features a high-contrast TFT display, fully configurable by a dedicated software * Designed to acquire and display data coming from your ECU, the internal accelerometer and GYRO, the GPS module (included in the kit) analogue inputs/digital inputs and predefined math channels * The MXG has eight configurable RGB LEDs—you can choose the conditions and colors * An ambient light sensor keeps the backlight at optimum brightness levels * With integrated shift lights you can choose from a host of advanced multi-colored RGB shift light patterns that can be customized to suit your requirements, and for each unique gear when required * The performance and data acquired can also be incremented by adding up to eight expansion modules * You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units * Swapping between pages can be managed pushing one or two pushbuttons * Select a solid alarm or flashing one and the flashing frequency, you can choose to have an accompanying text message and set the alarm priorities * Analogue camera inputs are available, to switch your display into a mirror camera, through a push-button command or event management (camera sold separately)
Not Yet Reviewed
$3,249.00
Haltech offers a variety of engine management systems, including the Elite 1500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Countless ECU, advanced tuning, and race functions * Outputs: Up to 4 injector and 4 ignition * Suits: Universal 1-12 cylinder or 2 rotor applications * Includes: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB software key.
Not Yet Reviewed
$2,049.00
—
$2,228.00
For years, data loggers have been expensive and complicated for the weekend racer. Good news, Computech has changed that with the cutting-edge technology of DataMaxx bracket kit data loggers, along with user-friendly software, and 24/7 weekend tech support. Datamaxx supplies the essential information need, plus a beautiful dash. You don't pay for anything you're not going to use with this kit; and you have the option to upgrade any time. Computech DataMaxx bracket kit data logger features: * DataMaxx main module * Billet aluminum enclosure * 100 samples per second per channel * Multiple CAN bus connections * Multiple rpm channels, magneto-compatible * Switch input channels * Warning light outputs * Multiple analog channels * Battery voltage channel * Sensors: engine rpm, driveshaft rpm, fuel psi, oil psi, water temp, and single EGT probe Computech DataMaxx LCD dash function features: * 10 channels per screen * Unlimited screen configurations * Customizable shift and warning lights * SD memory card port * Variable speed playback (1/10x, 1/4x, 1/2x, 1x, 2x, 4x, 10x, 100x) * Single cable connection * Day/night brightness modes * Eliminates need for conventional gauges
( 1 )
$2,349.95
DIYAutoTune MegaSquirt MS3Pro Ultimate standalone engine management systems provide unlimited control of your naturally aspirated or forced induction engine with a staggering list of race-focused features that will get you down the track with excellence. MS3Pro Ultimate ECUs by AMP EFI will log up to 64 channels, conservatively, at 200hz, and is ready to support a wide variety of engines out of the box, as well as over 50 different ignition modes. The units also utilize a compact lightweight case design of sealed high-temperature nylon and heavy-duty AMPSEAL connectors to protect sensitive internals. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro Ultimate models will deliver winning control. MS3Pro Ultimate ECUs feature configurable inputs/outputs: * 10 channel 4:1 or 8:2 programmable peak and hold injector outputs * 8 logic level ignition outputs * 6 digital inputs * 5 digital input/output * 5 PWM outputs * 2 digital outputs * 12 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro Ultimate standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Keep Alive Memory (KAM) * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$2,099.99
The Haltech Elite 2500T ECU takes the art of engine calibration to a whole new level. Featuring a robust environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, dual channel knock control, and much more, the Elite 2500T provides engine calibrators the tools they need to get the job done right. Alongside this Elite 2500T ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide. At the forefront of today's cutting edge engine management technology, Haltech is well-known for high horsepower engine management, which complements their harnesses and add-ons. Product Overview: * Includes: Elite 2500 T ECU with DBW, Advanced Torque Management and Race Functions, and USB programming cable * Elite 2500T ECU is a top of the range, two-connector ECU with Advanced Torque Management (ATM) * Ideal for popular late model performance and racing applications * Supports 1 to 12-cylinder engines and 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * ESP Calibration Software—intuitive and easy to use
Not Yet Reviewed
$3,429.00
Haltech Elite 1500 ECUs with plug-and-play harness provide the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and these Haltech plug-and-play products allow you to be up and running in just a few hours. A quick-start guide will walk you through installation of the Haltech plug-and-play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 1500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, or engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2-rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use Harness features: * An efficient Haltech plug-and-play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the HalTech plug-and-play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration * The Haltech output IGN-1A and 13B coil terminated harness models connect to the Haltech IGN-1A ignition coils (ignition coils not included please order 4 x HT-020114 if required)
Not Yet Reviewed
$2,668.00
—
$2,757.00
Haltech's Elite 2500 ECU with basic universal wire-in harness is ideal for dedicated race cars, engine swaps and custom wiring jobs. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 2500 provides engine calibrators with the tools they need to get the job done right. The basic universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your 2500 ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! The Elite 2500 ECU is now paired with new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to both tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, basic universal wire-in harness, and USB programming cable * Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications * Recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts (does not include fuse and relay box) * Supports 1 to 12-cylinder engines, 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,319.00
Haltech's Elite 2500 ECU with Plug'n'Play harness provides the fastest and most cost-effective way to wire your race car or engine conversion! Simply connect a handful of labelled wires, and this plug-and-play product allows you to be up and running in just a few hours. The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle. The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration. ECU Overview: Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, and 8-cylinder, drive-by-wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, and engines with multiple variable camshafts. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, providing engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to both tuners and performance enthusiasts worldwide. * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof Case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software Harness features: * An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours * The quick-start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle * The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration Notes: Please confirm your alternator connector (see the product quick start guide) and order an alternator adaptor if required. (HT-040090 or HT-040091) ignition coils and harnesses are not included, Please order 8 x HT-020102 and/or HT-045657 if required.
Not Yet Reviewed
$2,629.00
—
$3,549.00
Manufacturer Rebate
AutoMeter competition LCD displays are the next evolution of driver communication and data acquisition. Designed for the harshest environments, their carbon composite housings are IP65 sealed against water and dust intrusion and will easily withstand 20g of continuous vibration and 50g of shock. A 7 in. LCD panel ensures easy visibility under all conditions with a retina level pixel density, unmatched brightness, and an optically bonded lens for extreme glare suppression. The display layout is fully configurable. Each system will accommodate four programmable data us channels (two CAN and two serial) in conjunction with a nearly limitless amount of discrete analog sensors and its integrated 3-axis accelerometer. Data collection at up to 1 kHz and the internal memory allows for practically infinite recording time. User-definable warnings take advantage of super bright, multicolor LEDs placed around the perimeter of the chassis to alert the driver to critical on-screen information. Display Features: * 1000 nit brightness for unmatched day and nighttime visibility with 800 x 480 resolution * Onboard photo sensor for automatic brightness control * 8.3 in. wide x 5.2 in. high x 1.4 in. deep * Single 37-way autosport (AS) wiring loom connector for ease of installation and removal * 12 analog inputs for discrete sensors; ideal for parameters not supported on the vehicle communication bus or ECU * Expansion modules available separately for additional input * DataPro Designer PC setup utility * Fully user-configurable from display via integrated 4-button interface for at-track changes * Optional external switch set can be mounted within driver reach for easy access * 16 configurable multi-color LED indicator lights can be programmed for a wide variety of alarm and gear change indication functions * Initial release supports six layers or screens selected from user-configurable templates (screens/instrument cluster designs/layouts); additional configurability supporting team selected graphics, parameter/instrument type and location, and size available with future firmware and PC software releases * Perfectly rendered virtual analog needles, value display bands, digital value indicators for vehicle parameters and configurable full-color text warning messages * Patented predictive lap-timing display for driver and vehicle development Inputs: * Four pulse/digital or analog inputs * Eight analog inputs (0-5 V or 0-12 V) * Five external switches/control outputs * Internal 3-axis accelerometer +/-6 g * Internal battery voltage * GPS mapping and lap timing Communications: * Two configurable RS232 ports * Configurable CAN BUS ports * Ethernet port * USB port Data Recording: * 4 GB onboard data-logging memory * Record up to 128 channels * Sample rates up to 500 Hz (select inputs 1000 Hz) * Includes powerful DataPro analysis software Environmental: * Operating temperature range: 20 to 180 degrees F * Humidity range: 0 to 100 percent relative humidity Miscellaneous: * Boot time/reset time to data screen: 2 seconds * Boot time for full graphic application: 8 seconds * Weight: 1.5 lbs.
Not Yet Reviewed
$3,420.99
Mopar Replacement clips and multi-purpose retainers are genuine OE-replacements. These versatile clips are manufactured from quality materials and factory specs to fit and perform just like the originals. Restore, repair, or maintain your vehicle with the correct Mopar components.
( 4 )
$3,142.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
