Availability
Ford Performance Parts Coyote 5.0L crate engine control packs are designed to properly wire Ford Performance Parts 5.0L modular crate engines. They include a specially-calibrated PCM, an electronic throttle control accelerator pedal, an air intake assembly, an MAF sensor, and all necessary wiring and harness adapters. You can eliminate the complexity of wiring modular 5.0L crate engines with one of these Ford Performance Parts engine control packs. Additional technical information: * Control pack M-6017-504V available for 2015-16 5.0L 4V Coyote engines, M-6007-M50A and M-6007-A50NAA 5.0L 4V Ti-VCT crate engines with manual transmission; M-6007-A50SCA and truck engines require modifications * Control pack M-6017-A504VA available for 2011-14 5.0L 4V Coyote engines, M-6007-M50 and M-6007-A50NA 5.0L 4V Coyote crate engines with manual transmission (adds wiring for Speed Dial M-4209ADPT-AC to pick up transmission output speed); M-6007-A50SC, M-6007-A50XS, Boss 302 and truck engines require modifications * Supercharged engines, M-6007-A50SC, M-6007-A50SCA, M-6007-A50XS, Boss 302 and truck engines require custom calibration * Electronic throttle control accelerator pedal eliminates throttle cable routing problems * Unique controls pack harness replaces stock body harness and is designed for street rod installation * Features OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Includes power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses and HEGO sensors * PCM (remanufactured) with Ford Performance calibration requires return-type fuel system, will not work with returnless fuel system * Installation of this PCM in a 2011-16 Mustang GT will result in a no-start condition * Not for use with a 2015-16 F150 engines
( 3 )
$2,083.99
—
$2,149.99
Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.
Not Yet Reviewed
$2,249.95
—
$2,499.95
Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.
Not Yet Reviewed
$3,049.95
—
$3,549.95
Ford Performance Parts 2018 Coyote 5.0L control packs take the complexity and mystery out of wiring the engine. These engine management systems include a powertrain control module (PCM) with Ford Performance calibration, as well as an electronic throttle control accelerator pedal (which eliminates throttle cable routing problems). A unique control pack harness replaces the stock body harness and is designed for custom vehicle builds. It features an OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis. Mustang Coyote 5.0L control packs include a power distribution module, air box, air inlet tube, MAF sensor, upper and lower radiator hoses, and HEGO sensors. Additional notes: * PCM with Ford Performance calibration requires a return-type fuel system; it will not work with a return-less fuel system * Supercharged versions, modified engines, and modified applications require custom calibration * Installation of this PCM in a 2018 Mustang GT will result in a no-start condition * For 2011-14 engines, use control pack M-6017-A504VA * For 2015-17 manual transmission version control pack, use M-6017-504V * For 2015-17 automatic transmission version control pack, use M-6107-M50A
( 2 )
$2,201.99
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,499.95
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$2,049.95
—
$2,099.95
HalTech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or HalTech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$2,044.00
Dinan Power Control Units deliver more power and more features with improved reliability and drivability than ever offered before, proving performance without sacrifice is alive and well! Dinan Power Control Units (PCUs) are in-line tuning modules based off over a decade of lessons learned in the category. At their core, the plug-and-play control units install between select sensors and the ECU, adjusting these signals to achieve increased performance that the stock programming is unable to approach. What sets them apart is their integration into more than just the fundamental boost sensors, but also additional connections--inclusive of OBDII, resulting in a more capable system that does more than just increase power. Dinan PCUs are controlled by a free Bluetooth app, available for both iOS and Android, and is home to all the potent features the device offers. Equipped with five different pre-set performance levels, you can use your smart phone and PCU app to change performance levels on the fly, revert to stock, set boost by gear, as well as monitor vehicle health via logging, customizable gauges, and code reading/clearing, ensuring a seamless tuning experience that even a novice can be comfortable with. Lastly, safety and reliability have been cornerstones of the Dinan brand for generations and not only does the Dinan PCU not hinder any factory safeguards or emissions controls but incorporates its own safety features as well. Going one step beyond our own internal protections, the PCUs also grant the end user the ability to monitor up to 20 different engine parameters in real time via customizable in-app gauges for verification of worry-free operation. Those same parameters can also be logged/viewed in app (or exported to CSV) for further scrutiny if desired. Dinan Power Control Units are available with a 2-year unlimited mileage product warranty or a 4-year/50k factory matching new car warranty. Select the Dinan PCU with the preferred warranty.
Not Yet Reviewed
$2,199.95
DiabloSport Modified PCM and Trinity 2 EX Platinum packages are the most advanced performance programmer and monitoring setups available for a large range of applications. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Each of these performance kits include an unlocked PCM, so you can tune in no time and keep your stock PCM safe and unaltered. And even though DiabloSport T2 Platinum programmers are already equipped with some of the best tuning capabilities right out of the box, they know you want to bolt-on upgrades and extract every bit of horsepower possible from your vehicle. That's where CMR custom tuning comes in. DiabloSports's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Pre-loaded, high performance tunes, in addition to custom tuning capabilities; it's the best of both when you choose to unlock your vehicle's potential with DiabloSport Modified PCM and Trinity 2 EX Platinum packages.
( 1 )
$2,049.95
—
$2,199.95
FAST XFI 2.0 marine engine control units deliver—fast! Utilizing the latest technology, FAST XFI 2.0 units can process, analyze, and adjust 4x quicker than previous EFI systems. The C-Com XFI Windows-based software is easy to navigate and features field-flashable capabilities; so you can download the latest software updates via email or directly from FAST. These XFI control units also feature Qwik Tune for programming without a laptop. FAST engineers worked with professional boat racers to tailor the benefits and advanced controls of these XFI 2.0's to the unique needs of marine applications. First, the ECU was O-ring sealed to enable marine use. Then, marine-specific auxiliary outputs were added. User-defined oil pressure, coolant temperature, and water pressure alarms can be set to trigger sirens, lights, or any other preferred alert. In addition, the engineers upgraded the user interface for power adders—including advanced forced induction, progressive controllability, and other advanced marine racing strategies and features. Faster processing means no more flat spots in the power curve or settling for "close enough." And with a revolutionary new self-tuning option, FAST XFI 2.0 marine engine control units are the only marine EFI systems that combine easy-to-use features and completely configurable capabilities. They accurately balance fuel and spark, allowing you to fine-tune and precisely control like never before. Some of the FAST XFI 2.0 engine control units' standard features include: * Built-in wideband O2 * Fully sequential and/or bank-to-bank capability * Individual cylinder correction * Dynamic scaling of vectors in 2-D and 3-D tables * Boost control * Fuel and oil pressure logging * Adjustable injector timing * Multiple ignition strategies
Not Yet Reviewed
$2,245.95
On Sale
FuelTech's FT600 EFI systems are the perfect association between the ECU and the dashboard—which makes them the world's most complete solution, presenting both features combined! Developed on the PowerFT platform, already praised for FuelTech's FT500 version, the FT600 EFI Systems offer new features, such as: the new Superseal automotive connectors that add up to 68 pins (20 sensor inputs and 32 outputs), accelerometer and gyroscope, two CAN networks, and a built-in GearController. The last feature enables the direct connection with the strain gauge sensor on the shifter, bringing new possibilities for more efficient engine gearshift cuts. In addition, FT600 EFI systems also present a pack of beloved racing functions used all over the world that cover time-based launch features, boost control, staging control, Pro-Nitrous control, advanced internal datalogger—just to name a few! More features and benefits: * Extreme high-quality aluminum housing, which is also waterproof to IP67 standards * Anti-glare TFT touch screen display and a redesigned dashboard exclusively developed to grant the driver an easier viewing experience * Touch screen display makes it possible to make map adjustments directly on the ECU, without the use of a laptop * Able to manage sequential injection and ignition on engines from 1 up to 12 cylinders (or up to 4 rotors); and comes with an option for simplified maps, which allows making initial adjustments easier or 3-D maps for more advanced applications * New ECU presents individual cylinder injection and ignition trim; plus exclusive features that help on the first engine start; and also contains an advanced and efficient closed loop fuel control for engine safety * Design includes an upper visor that reduces glare and houses 10 LED lights that are color and intensity adjustable, suitable for a progressive shift light * 4 additional LED lights on the side of the ECU that are adjustable for diagnosing, alerts, and current status of any sensor * Uses FTManager software, with all resources and existing functions as the FT550 * Compatible with all existing features and FT500 maps to allow you to open, edit and save maps through an interactive interface that is easy to use
Not Yet Reviewed
$2,699.00
$2,199.00
Unlike controllers from regular-production vehicles (which may or may not come with a used engine), Chevrolet Performance uniquely calibrates their LT5 engine controller kits for installation in older vehicles. They arrive with many features required for late-model production vehicles in the "off" position to prevent triggering diagnostic trouble codes, which could also affect performance or require additional calibration adjustments. LT5 engine controller kits offer all the required components to plug into the engine and get it running—from the controller itself and the accompanying wire harness to the mass airflow sensor, oxygen sensors, and even a throttle pedal assembly for engines equipped with an electronic throttle body. Chevrolet Performance LT5 engine controller kits also include detailed instructions to help you do it right the first time, even if you have no experience!
Not Yet Reviewed
$4,921.66
—
$5,228.80
AiM Sports MXT 1.3 data logger kits are available in several versions to meet your specific needs. All are designed to acquire and display data coming from your ECU, as well as from the GPS09c included in the kits, analog/digital inputs, and predefined math channels. Performance and data acquired can also be increased by adding up to eight expansion modules. The MXT 1.3 data loggers for motorsports are AiM's largest with a 10 in. high-contrast color TFT display and all the features of the MX Series data loggers. Each kit will include an MXT 1.3 standard or Street icons version, a 37-pin standard harness, USB cable, and a 1.3, 2, or 4m GPS09c or 2 or 4m GPS09c roof version. Select the kit to best suit your vehicle and application needs. Some of the key features: * Ambient light sensor * Configurable RGB LED shift lights and alarms * Manages CAN, K-Line, and RS232 ECU communication lines * GPS module, normal or roof version -- Roof version offers an easier and clean installation on the external surface of the vehicle--no more issue with the GPS signal--avoiding problems of application inside certain cockpits * Analog/digital inputs -- 8 fully configurable, maximum 500 Hz each * Math channels * CAN2 line to manage data from additional modules * Wi-Fi connection * 4 GB internal memory * Two motorsport connectors, plus one binder connector * Anodized aluminum body * Metallic push buttons * IP67 waterproof rated
Not Yet Reviewed
$3,599.00
Manufacturer Rebate
AutoMeter competition LCD displays are the next evolution of driver communication and data acquisition. Designed for the harshest environments, their carbon composite housings are IP65 sealed against water and dust intrusion and will easily withstand 20g of continuous vibration and 50g of shock. A 7 in. LCD panel ensures easy visibility under all conditions with a retina level pixel density, unmatched brightness, and an optically bonded lens for extreme glare suppression. The display layout is fully configurable. Each system will accommodate four programmable data us channels (two CAN and two serial) in conjunction with a nearly limitless amount of discrete analog sensors and its integrated 3-axis accelerometer. Data collection at up to 1 kHz and the internal memory allows for practically infinite recording time. User-definable warnings take advantage of super bright, multicolor LEDs placed around the perimeter of the chassis to alert the driver to critical on-screen information. Display Features: * 1000 nit brightness for unmatched day and nighttime visibility with 800 x 480 resolution * Onboard photo sensor for automatic brightness control * 8.3 in. wide x 5.2 in. high x 1.4 in. deep * Single 37-way autosport (AS) wiring loom connector for ease of installation and removal * 12 analog inputs for discrete sensors; ideal for parameters not supported on the vehicle communication bus or ECU * Expansion modules available separately for additional input * DataPro Designer PC setup utility * Fully user-configurable from display via integrated 4-button interface for at-track changes * Optional external switch set can be mounted within driver reach for easy access * 16 configurable multi-color LED indicator lights can be programmed for a wide variety of alarm and gear change indication functions * Initial release supports six layers or screens selected from user-configurable templates (screens/instrument cluster designs/layouts); additional configurability supporting team selected graphics, parameter/instrument type and location, and size available with future firmware and PC software releases * Perfectly rendered virtual analog needles, value display bands, digital value indicators for vehicle parameters and configurable full-color text warning messages * Patented predictive lap-timing display for driver and vehicle development Inputs: * Four pulse/digital or analog inputs * Eight analog inputs (0-5 V or 0-12 V) * Five external switches/control outputs * Internal 3-axis accelerometer +/-6 g * Internal battery voltage * GPS mapping and lap timing Communications: * Two configurable RS232 ports * Configurable CAN BUS ports * Ethernet port * USB port Data Recording: * 4 GB onboard data-logging memory * Record up to 128 channels * Sample rates up to 500 Hz (select inputs 1000 Hz) * Includes powerful DataPro analysis software Environmental: * Operating temperature range: 20 to 180 degrees F * Humidity range: 0 to 100 percent relative humidity Miscellaneous: * Boot time/reset time to data screen: 2 seconds * Boot time for full graphic application: 8 seconds * Weight: 1.5 lbs.
Not Yet Reviewed
$3,420.99
Antigravity Batteries lithium deep cycle batteries include a first-of-its-kind Bluetooth Monitoring App, so you can easily check the battery's status using your phone, tablet, or computer. Along with real-time Bluetooth monitoring, these batteries are made with Grade-A UL Listed cells and a state-of-the-art Battery Management System (BMS) to ensure the battery will provide you with years of the safest operation, highest performance, and greatest satisfaction. Direct replacements for lead/acid deep cycle batteries, Antigravity lithium deep cycle batteries are ultra-lightweight for their capacity, being 60 percent lighter than lead/acid models. Choose the model needed. Additional notes: * Fuel gauge on top of battery to check its capacity and more * Safest battery technology using LiFePO4 Lithium chemistry * Automatic self-heating for charging readiness in freezing conditions (not on all batteries)
Not Yet Reviewed
$2,799.99
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$2,379.95
—
$2,505.95
DIYAutoTune MegaSquirt MS3Pro Ultimate standalone engine management systems provide unlimited control of your naturally aspirated or forced induction engine with a staggering list of race-focused features that will get you down the track with excellence. MS3Pro Ultimate ECUs by AMP EFI will log up to 64 channels, conservatively, at 200hz, and is ready to support a wide variety of engines out of the box, as well as over 50 different ignition modes. The units also utilize a compact lightweight case design of sealed high-temperature nylon and heavy-duty AMPSEAL connectors to protect sensitive internals. Whether you're running down the drag strip, the road course, the salt flats, or whatever your racing venue of choice, DIYAutoTune MS3Pro Ultimate models will deliver winning control. MS3Pro Ultimate ECUs feature configurable inputs/outputs: * 10 channel 4:1 or 8:2 programmable peak and hold injector outputs * 8 logic level ignition outputs * 6 digital inputs * 5 digital input/output * 5 PWM outputs * 2 digital outputs * 12 analog inputs, plus built-in MAP, Baro, and internal ECU temperature sensor * 3 high-current digital/pwm outputs * 3 digital frequency inputs * 4 variable reluctor conditioned inputs MS3Pro Ultimate standalone systems feature: * VE-based tuning * Speed density, Alpha-N, MAF-based tuning and blended algorithms * Up to 12 sequential saturated fuel injector outputs * Up to 12 cylinder sequential support * 2D or 3D table views * The tuner can toggle between 2D or 3D table views with a single click * Individual cylinder fuel and spark trim tables * Table switching * VVT control (4 channels) * Generic wheel decoder allows for support of nearly any standard trigger/aftermarket trigger pattern * Supports 50+ specialty OEM and aftermarket ignition systems using factory cam/crank wheels and sensors * Support for odd-fire and even-fire engines * Capable of controlling even-fire, odd-fire, piston, rotary, and even radial engines * Fuel-only mode--disables ignition output features for control of fuel injection only * Internal SD card high-speed data logging * Traction control multiple strategies * E85 flex fuel sensor input * Long-term fuel trim--OE-style automatic fuel trim to allow for changes in engine over time * High-power time enrichment--allows for richer mixture after extended time in high power * Multiple acceleration enrichment strategies * Nitrous control strategies * 3-step rev limiter with flat shift * Trans-brake and bump box control * Advanced launch control strategies * Pit lane limiter--speed limiter for pit lane, reduces engine power by spark retard/cut or fuel cut; can limit based on VSS or rpm if no VSS input is available * Rally-style turbo anti-lag with rotational idle * Allows cyclic fuel and spark cut * Controls idle valve and configurable outputs for external fuel or air supply * Boost control--multiple open and closed loop strategies * Idle control--multiple open and closed loop strategies * Water and methanol injection * Fuel pump control * Intelligent knock detection and response--two channels * Multiple Engine Protection and fault mode strategies * Keep Alive Memory (KAM) * Generous spare I/O for any standard/custom I/O needs * Air conditioner control with feed-forward idle-up * Cooling fan control--programmable fan on and off activation points; can be configured to run fan with engine running only, or when engine is running and not running * Alternator field control/voltage regulation * Comprehensive Test Modes * CAN Support for I/O expansion--virtually limitless I/O capability * CAN Support for third party dash devices * Android compatible * Self-calibration * Fully enabled * Redundant signal ground wiring * Dual external 5 V ref supplies, individually fused * No dark current * Field upgradeable firmware
Not Yet Reviewed
$2,099.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
