Ignitions & Electrical - Racing KEYWORD - In Stock Filter Options - Vendor In Stock Filter Options - Free Shipping on Orders Over $109 at Summit Racing

MSD Pro Mag Lite Magnetos

MSD took their original Pro Mag 12 distributors, added some new features to build performance, and subtracted 3 lbs. to help you get down the track faster. The results are the Pro Mag Lites. They utilize a magnetic pickup design with 16 rare earth magnets for rock-steady performance without recharging. They deliver 12 amps and 40,000 V worth of spark energy, feature built-in rev control that's good for up to 12,000 rpm, and use an all-billet housing for superior durability. They're compatible with MSD's crank trigger system.

Not Yet Reviewed

$2,664.95

—

$4,199.95

On Sale

Racepak SmartWire Kits

Racepak SmartWire kits are fully programmable power distribution modules, capable of controlling 30 outputs (on/off switching) and 12 inputs (switch-activated) on any type of 12–16 VAC systems. Fuses, relays, and solenoids are eliminated, instead controlled through solid-state switching inside the housing. Current outputs and switching inputs—along with a nearly unlimited variety of on-off switching functions—are user-programmable through the Racepak DataLink II software. Racepak SmartWire kits can operate in three different modes: * Stand Alone: Power from the battery is connected to the power stud of the SmartWire. Outputs to each device in the vehicle are connected to one of two 15-pin connectors; output currents and related requirements are programmed via connection of the SmartWire to the user's PC. Switching off and on of the devices is handled through inputs on the 15-pin connectors or optional SwitchPanel or SwitchModule. * In conjunction with Racepak V-Net sensors: Want to automatically turn on a radiator fan, but only when the water temperature is above 190 degrees? Add a Racepak V-Net water temperature sensor to the vehicle, connect it to the V-Net port of the SmartWire, and program it through use of a PC connected to the SmartWire. * In conjunction with a Racepak V-Net data logger: This allows the SmartWire to be connected to the single V-Net T cable, which transmits all sensor data to the data logger. They "borrow" the sensor data to trigger devices based on desired programmed settings. In addition, all states and conditions of each channel can now be monitored and recorded in the DataLink II software, alongside all the other sensor data.

Not Yet Reviewed

$2,305.95

—

$2,561.95

$2,074.95

—

$2,304.95

On Sale

Holley Dominator EFI Vehicle Management Systems

Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential

4.17 out of 5 stars ( 6 )

$2,399.95

—

$3,499.95

$2,158.95

—

$3,148.95

On Sale

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.22 out of 5 stars ( 91 )

$2,559.95

$2,068.95

—

$3,399.95

FuelTech FT600 EFI System

FuelTech's FT600 EFI systems are the perfect association between the ECU and the dashboard—which makes them the world's most complete solution, presenting both features combined! Developed on the PowerFT platform, already praised for FuelTech's FT500 version, the FT600 EFI Systems offer new features, such as: the new Superseal automotive connectors that add up to 68 pins (20 sensor inputs and 32 outputs), accelerometer and gyroscope, two CAN networks, and a built-in GearController. The last feature enables the direct connection with the strain gauge sensor on the shifter, bringing new possibilities for more efficient engine gearshift cuts. In addition, FT600 EFI systems also present a pack of beloved racing functions used all over the world that cover time-based launch features, boost control, staging control, Pro-Nitrous control, advanced internal datalogger—just to name a few! More features and benefits: * Extreme high-quality aluminum housing, which is also waterproof to IP67 standards * Anti-glare TFT touch screen display and a redesigned dashboard exclusively developed to grant the driver an easier viewing experience * Touch screen display makes it possible to make map adjustments directly on the ECU, without the use of a laptop * Able to manage sequential injection and ignition on engines from 1 up to 12 cylinders (or up to 4 rotors); and comes with an option for simplified maps, which allows making initial adjustments easier or 3-D maps for more advanced applications * New ECU presents individual cylinder injection and ignition trim; plus exclusive features that help on the first engine start; and also contains an advanced and efficient closed loop fuel control for engine safety * Design includes an upper visor that reduces glare and houses 10 LED lights that are color and intensity adjustable, suitable for a progressive shift light * 4 additional LED lights on the side of the ECU that are adjustable for diagnosing, alerts, and current status of any sensor * Uses FTManager software, with all resources and existing functions as the FT550 * Compatible with all existing features and FT500 maps to allow you to open, edit and save maps through an interactive interface that is easy to use

Not Yet Reviewed

$2,999.00

Haltech Nexus R3 VCU with Universal Wire-In Harness Kits

Haltech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full ECU manual and software located on the USB key provided with the VCU, or downloadable from the Haltech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device Haltech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.

Not Yet Reviewed

$2,799.00

Haltech Elite 2500 ECU with Plug and Pin Set

Haltech offers a variety of engine management system options, including the Elite 2500 ECU with Plug and Pin Set. Elite 2500 is a 3-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional overview: * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x Dedicated inputs (Dual Knock, ignition Switch and onboard MAP Sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of Input and Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software

Not Yet Reviewed

$2,044.00

Haltech Elite 2500 ECU with Premium Universal Wire-In Harness

Haltech offers a variety of engine management systems, including the Elite 2500 ECU with premium universal wire-in harness. Ideal for dedicated race cars, engine swaps and custom wiring jobs, the harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! ECU OVERVIEW: Elite 2500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. It's recommended for 4, 6, 8-cylinder, Drive-By-Wire (DBW) or 2, 3, 4-rotor engines, EFI conversions, or engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. * Supports 1 to 12 cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x Fuel Injection Outputs * 8 x Ignition Outputs * 12 x Digital Outputs * 10 x Analog Voltage Inputs * 4 x Synchronized Pulsed Inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP sensor) * 2 x Dedicated Engine Position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * Now using the new NSP Calibration Software * Outputs: Up to 8 injector and 8 ignition * Suits: Recommended for 4, 6, 8-cylinder, Drive-by-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable camshafts * Includes: Elite 2500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, molded 6 power circuit fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. USB programming cable and USB Software Key * Notes: Top of the range, two-connector ECU. Ideal for popular late model performance and racing applications.

Not Yet Reviewed

$2,409.00

FAST XFI 2.0 Marine Engine Control Units

FAST XFI 2.0 marine engine control units deliver—fast! Utilizing the latest technology, FAST XFI 2.0 units can process, analyze, and adjust 4x quicker than previous EFI systems. The C-Com XFI Windows-based software is easy to navigate and features field-flashable capabilities; so you can download the latest software updates via email or directly from FAST. These XFI control units also feature Qwik Tune for programming without a laptop. FAST engineers worked with professional boat racers to tailor the benefits and advanced controls of these XFI 2.0's to the unique needs of marine applications. First, the ECU was O-ring sealed to enable marine use. Then, marine-specific auxiliary outputs were added. User-defined oil pressure, coolant temperature, and water pressure alarms can be set to trigger sirens, lights, or any other preferred alert. In addition, the engineers upgraded the user interface for power adders—including advanced forced induction, progressive controllability, and other advanced marine racing strategies and features. Faster processing means no more flat spots in the power curve or settling for "close enough." And with a revolutionary new self-tuning option, FAST XFI 2.0 marine engine control units are the only marine EFI systems that combine easy-to-use features and completely configurable capabilities. They accurately balance fuel and spark, allowing you to fine-tune and precisely control like never before. Some of the FAST XFI 2.0 engine control units' standard features include: * Built-in wideband O2 * Fully sequential and/or bank-to-bank capability * Individual cylinder correction * Dynamic scaling of vectors in 2-D and 3-D tables * Boost control * Fuel and oil pressure logging * Adjustable injector timing * Multiple ignition strategies

Not Yet Reviewed

$2,245.95

On Sale

Holley Terminator X Engine Management Systems

Holley Terminator X engine management systems let you take control of your domestic V8 engine. These kits give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X features real-time fuel learn, high impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. All systems come fully loaded with base maps for common engine combinations to get you out of the garage and onto the road or track fast. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors. (Will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables: 4 x 1D tables, 1 x 1D per gear table, 4 x 2D tables, 1 x 2D per gear table * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most domestic V8 engines, as well as tuning and gauge display functions (not available with every kit)

4.48 out of 5 stars ( 96 )

$2,609.95

—

$3,019.95

AiM Sports MXS 1.3 Motorsport Lap Timers

AiM Sports MXS 1.3 motorsport lap timers are a 5-inch high-contrast TFT color display and data logger that provides professional-grade, real-time performance tracking and analysis. These data acquisition components by AiM Sports include precise GPS-based lap timing (with 4,000+ tracks pre-loaded), deep data logging via Race Studio 3 software, and expansive ECU integration to monitor engine vitals, which helps drivers improve lap times. In the relentless pursuit of excellence, every advantage counts. The AiM MXS 1.3 motorsport lap timers revolutionize the racing experience, empowering racers to push their limits, unlock their full potential, and chase victory with unwavering determination. Key features and benefits of AiM MXS 1.3 motorsport lap timers: * High-precision data acquisition—features internal GPS (0.5m/1.3m/2m/4m options) for accurate track maps, lap times, and split times * Deep customization—offers configurable, high-contrast display pages and customizable RGB shift lights/alarm LEDs, allowing for tailored visual alerts * Comprehensive data logging—stores hours of data via 4GB non-volatile memory, allowing for detailed post-session analysis of speed, throttle, brake, and engine performance * Extensive vehicle integration—connects to over 2,000 ECU types, plus eight analog sensors and CAN expansion modules (e.g., Lambda sensors, SmartyCam) to capture comprehensive vehicle data * Wireless connectivity—features built-in Wi-Fi for easy, cable-free data downloads to a computer for analysis * Predictive lap timing—provides real-time, in-car feedback, comparing current laps to previous bests to instantly improve performance * Easy setup and expansion—works seamlessly with AiM Race Studio 3 for easy, user-friendly configuration of sensors and alarms * The MXS 1.3 is available as a full logger, or as the MXS 1.3 Strada (non-logging, display only), both offering similar high-definition, customizable interfaces

Not Yet Reviewed

$2,899.00

—

$3,599.00

AiM Sports MXP Data Loggers

AiM Sports MXP data loggers represents a huge leap forward in racing display flexibility and expandability—at the highest level—giving you the required tools for winning performance. The MXP offers more display area than the MXS 5 in. display, in a similar dimension. The dash loggers are provided with lights for integrated gear change indication and alarms in multiple colors that are totally configurable with drag and drop. They are equipped with Wi-Fi, USB connectivity, a 4m GPS module, and a 9-axis inertial platform. When you need to know, AiM Sports MXP data loggers are the instrumentation you need to use! Features and specs include: * High-contrast 6 in. TFT display * Anodized aluminum body; metallic push buttons * Resolution: 800 x 480 pixels * Contrast: 600:1 * Brightness: 700cd/m2--1,100 Lumen * Ambient light sensor: Yes * Fully user configurable * 5 configurable RGB alarm LEDs * 10 configurable RGB LED shift light array * ECU connections: CAN, RS232 or K-Line * ECU compatibility: 1,000+ industry leading ECUs * Expansion CAN connection: 4.00 m GPS module, channel expansion, TC hub, Lambda controller, SmartyCam HD * Analog inputs: 8 fully configurable, max 1,000 Hz each * Digital inputs: 4 speed inputs, lap signal, coil rpm input * Digital outputs: 2 (1 A max each) * Second CAN: Yes * Inertial platform: Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer * Internal memory: 4 GB * Connectors: 2 Motorsport connectors and 1 binder connector * Power consumption: 400 mA * IP65 waterproof * Real-time fully configurable math channels What comes in the box: * MXP * GPS module with cable * USB cable * 37 pins standard harness * Race Studio 3 software

Not Yet Reviewed

$2,899.00

FuelTech FTSPARK GEN II Ignition System

The FuelTech FTSPARK GEN II is an extremely high-energy Capacitive Discharge Ignition (CDI) system designed to meet the highest spark requirements for racing. It's developed for high-horsepower combinations and test-proven on 5,000+ horsepower engines! Compatible with any ECU on the market, this system is able to generate a spark with up to 750mJ (mJ=mili Joules) of energy—and is capable of firing the spark with 140 amps of current in the coil primary. With these features, FTSPARK generates a spark with approximately 5x more energy and 10x more current compared to a SparkPRO, ensuring a burn in any condition, especially in extremely rich air/fuel ratios. Models are available for 4-, 6-, or 8-coil applications. Technical description: * Programmable energy via CAN or digital input to adjust the energy level; - 475 V in the primary of the coil, which helps to prevent interference in the system * 140 amps of current in the primary of the coil with Racing CDI FuelTech coil for FTSPARK 750mJ * CAN communication with FuelTech PowerFT ECUs for diagnostic and datalogging * Automotive connector with gold-plated terminals * Serial bus (1 wire) allows the use of only one ECU output that triggers all ignition outputs (only with PowerFT) * Anodized aluminum and plastic case * Maximum working temperature: approximately 212 degrees F * Supply voltage for full power: 14-26 V. Minimum voltage for starting 8 V * Maximum operating frequency: 670 Hz * Compatible with other ECUs on the market. Check compatibility of your ECU with FuelTech tech support Contents of package: * One FTSPARK (GEN II750mJ or EXTREME) module * Installation and operation manual * Mounting hardware kit (4 rubber mounts, 8 washers and 8 nuts)

Not Yet Reviewed

$2,099.00

On Sale

Racepak V500SD Data Loggers

Racepak V500SD Data Loggers are excellent for monitoring several channels of information, while utilizing fast sampling rates for extended periods of recording critical information. Whether your vehicle fits in Pro Stock, Pro Modified or various other sportsman classes, you can be sure to be informed by the stunning 71 channels of data recording for your custom race application. These state of the art V500SD data loggers with datalink standard software are the perfect choice for a racer in need!

Not Yet Reviewed

$2,561.95

$2,304.95

MSD Pro Mag 44 Magnetos

Serious racers choose MSD Pro Mag 44--the mother of magnetos. With no magnets to recharge or points to replace, and an amazing 44 amps of primary current, it's no surprise that these magnetos are the choice of nitro-gulping top fuel racers! Pro Mag 44 magnetos are built with an assemblage of rare earth magnets and windings to produce incredible energy. They accurately trigger and distribute this energy on a precision path to your spark plugs, creating a burst of ground-shaking energy in your cylinders. And, for the absolute ultimate in ignition triggering, the Pro Mag 44s' design allows you to add optional accessories--a crank trigger, timing retard control, or even a rev limiter! Forget those weak, inaccurate points and adjustments. Get the most powerful, accurate magnetos with durability to match their performance--the MSD Pro Mag 44 magnetos.

Not Yet Reviewed

$3,849.95

—

$4,304.95

15 Results Found For "Racing"