Availability
Showing In Stock Items. Show All 8 Items.
When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class
Not Yet Reviewed
$2,499.95
MSD took their original Pro Mag 12 distributors, added some new features to build performance, and subtracted 3 lbs. to help you get down the track faster. The results are the Pro Mag Lites. They utilize a magnetic pickup design with 16 rare earth magnets for rock-steady performance without recharging. They deliver 12 amps and 40,000 V worth of spark energy, feature built-in rev control that's good for up to 12,000 rpm, and use an all-billet housing for superior durability. They're compatible with MSD's crank trigger system.
Not Yet Reviewed
$2,599.95
—
$4,099.95
Edelbrock Pro-Flo 4 Plus systems simplify EFI for the "Big Three"! These ingenious engine management systems support late model Ford Coyote, Chevrolet LS, and Mopar Gen III Hemi engines, along with all their performance benefits in hot rod transplant applications. Each package consists of an ECU, wiring harness, and a 7 in. wireless touch screen tablet for programming, calibration adjustments, and monitoring performance. All systems are plug-and-play and are supported by a standalone Edelbrock Android app "E Tuner 4 Plus" specific for Pro-Flo 4 Plus applications. There is no laptop tuning required, base calibrations are provided, the systems are self-learning, and you can expect great out-of-the box performance. Edelbrock Pro-Flo 4 Plus systems feature: * Full VCT control of Coyote and Gen III Hemi engines with no add-on modules * Controls up to two drive-by-wire throttle bodies (LS applications) * Dual on-board wideband oxygen sensors with left and right bank closed loop AFR control using Bosch LSU4.9 sensors * Knock control using OEM sensors to provide knock feedback (harness sold separately) * High impedance injector drivers * E-Tuner PLUS simplified tuning interface. Tune wirelessly with Bluetooth using an Android device * Refined base calibrations with little or no tuning required. No costly dyno sessions required, just load a calibration and go! * Cosmetically appealing, fully terminated, modular wiring harness makes installation easy * Fully potted and weatherproof compact ECU design
( 1 )
$2,379.95
—
$2,505.95
Serious racers choose MSD Pro Mag 44--the mother of magnetos. With no magnets to recharge or points to replace, and an amazing 44 amps of primary current, it's no surprise that these magnetos are the choice of nitro-gulping top fuel racers! Pro Mag 44 magnetos are built with an assemblage of rare earth magnets and windings to produce incredible energy. They accurately trigger and distribute this energy on a precision path to your spark plugs, creating a burst of ground-shaking energy in your cylinders. And, for the absolute ultimate in ignition triggering, the Pro Mag 44s' design allows you to add optional accessories--a crank trigger, timing retard control, or even a rev limiter! Forget those weak, inaccurate points and adjustments. Get the most powerful, accurate magnetos with durability to match their performance--the MSD Pro Mag 44 magnetos.
Not Yet Reviewed
$3,749.95
—
$4,099.95
Racepak V500SD Data Loggers are excellent for monitoring several channels of information, while utilizing fast sampling rates for extended periods of recording critical information. Whether your vehicle fits in Pro Stock, Pro Modified or various other sportsman classes, you can be sure to be informed by the stunning 71 channels of data recording for your custom race application. These state of the art V500SD data loggers with datalink standard software are the perfect choice for a racer in need!
Not Yet Reviewed
$2,499.95
FuelTech's FT600 EFI systems are the perfect association between the ECU and the dashboard—which makes them the world's most complete solution, presenting both features combined! Developed on the PowerFT platform, already praised for FuelTech's FT500 version, the FT600 EFI Systems offer new features, such as: the new Superseal automotive connectors that add up to 68 pins (20 sensor inputs and 32 outputs), accelerometer and gyroscope, two CAN networks, and a built-in GearController. The last feature enables the direct connection with the strain gauge sensor on the shifter, bringing new possibilities for more efficient engine gearshift cuts. In addition, FT600 EFI systems also present a pack of beloved racing functions used all over the world that cover time-based launch features, boost control, staging control, Pro-Nitrous control, advanced internal datalogger—just to name a few! More features and benefits: * Extreme high-quality aluminum housing, which is also waterproof to IP67 standards * Anti-glare TFT touch screen display and a redesigned dashboard exclusively developed to grant the driver an easier viewing experience * Touch screen display makes it possible to make map adjustments directly on the ECU, without the use of a laptop * Able to manage sequential injection and ignition on engines from 1 up to 12 cylinders (or up to 4 rotors); and comes with an option for simplified maps, which allows making initial adjustments easier or 3-D maps for more advanced applications * New ECU presents individual cylinder injection and ignition trim; plus exclusive features that help on the first engine start; and also contains an advanced and efficient closed loop fuel control for engine safety * Design includes an upper visor that reduces glare and houses 10 LED lights that are color and intensity adjustable, suitable for a progressive shift light * 4 additional LED lights on the side of the ECU that are adjustable for diagnosing, alerts, and current status of any sensor * Uses FTManager software, with all resources and existing functions as the FT550 * Compatible with all existing features and FT500 maps to allow you to open, edit and save maps through an interactive interface that is easy to use
Not Yet Reviewed
$2,699.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
