Availability
DDC Plug and Play coilover kits are part of the KW iSuspension program--the intelligent suspension solution. They combine the advantages of an adaptive damping system with a vehicle-specific aftermarket suspension solution. One of two versions offered, the KW DDC Plug & Play lineup is for select vehicle models with factory adaptive suspension. They combine the control of your standard damper system with a seamless suspension lowering system and the driving dynamics tuned by KW Suspensions experienced engineers. There are no compromises to be made with the adaptive DDC Plug and Play coilover kit designed for your application. More product features include: * Instantly recognized by the vehicle's on-board electronics so all the displays and controls of your factory vehicle remain fully functional, but you get a completely new driving experience * Allows the suspension to be lowered at custom intervals within the framework of the certified technical component report * Composite spring seats (perches) made from a wear-resistant and friction-optimized polyamide composite material that prevents oxidation with a stainless steel insert for maximum strength * Friction-optimized, trapezoid threads that are insensitive to dirt, require less force to adjust, and provide a higher load-bearing capacity due to a larger cross-section * Rust-proof stainless steel with Inox-Line coatings that will not wear off while adjusting * The technical component report is always included in the package and outlines the guidelines for lowering the suspension of the respective vehicle
Not Yet Reviewed
$4,294.00
KW Variant 1 coilover kits are optimally adjusted for sporty driving, comfort, and safety. They enable you to drop your ride's center of gravity and customize the height at all four corners. KW Variant 1 twin tube coilover kits are designed with shorter INOX-Line stainless steel strut housings for more spring travel, anodized aluminum spring collars for durability, and high-tensile racing springs for strong support and comfort. Order the model with options recommended for your vehicle.
( 1 )
$2,184.00
—
$2,954.00
RideTech RidePro E5 Air Ride Suspension Control dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 5-gallon tank * RidePro E5 digital control * Two Thomas compressors * 1/4 in. air lines and fittings * Perfect for vehicles over 3,500 lbs.
Not Yet Reviewed
$2,665.00
RideTech RidePro E5 Air Ride Control BigRed AirPod dual compressor systems offer all-in-one integrated, pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. They are ideal for trucks and other heavy applications to quickly raise and lower your vehicle and adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 BigRed AirPod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 5-gallon tank * 2 Thomas compressors * Big Red high-flow air valve solenoid block * RidePro E5 pressure based digital leveling system * 3/8 in. air lines and fittings and wiring * AirPod systems eliminate hours of installation time
( 1 )
$3,365.00
When demanding the most from your muscle car, RideTech has the answers with TruTurn suspension handling packages. RideTech's revolutionary StrongArm control arms are high-strength, precision built units equipped with modified ball joints to correct caster and camber angles, reduce bump steer, and deliver better wheel placement. The lower control arms feature double-shear mounts for added strength and lowered shock mounts for more suspension travel. Combined with high-quality bushings to control deflection and stiction, these control arms provide enhanced steering feel and improved steering geometry. The TruTurn system adds tall spindles and corrected steering linkages to complete the package; this helps to correct bump steer, improve Ackerman angles, and increase camber gain. The updated steering also allows the use of large, modern wheels without compromising handling or suspension travel. Bring your muscle car's steering into the 21st century with RideTech's TruTurn suspension handling packages, available for a broad range of applications.
Not Yet Reviewed
$3,350.00
EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns
( 23 )
$2,239.99
—
$2,768.99
Flaming River 1968-72 Chevelle power rack and pinion cradle kits modernize and strengthen your current steering system. The precision JIG-welded units install with basic hand tools into your stock steering mounting holes, beefing up your rack gear and still allowing for a full turning radius. Whether you have a small or big block engine, these kits use a unique travel bar system that connects new tubular inner tie rod ends to the original pivot points to reduce bump steer. Numerous kits are available with or without a tilt column and steering pump; and most include wiring connectors, universal joints and shafting, mounting hardware, a billet swivel floor mount, and a polished aluminum mounting reservoir. Enjoy an updated steering system that's lighter and stronger with a Flaming River 1968-72 Chevelle power rack and pinion cradle kit.
( 1 )
$2,731.99
—
$4,813.99
RideTech RidePro E5 Air Ride Suspension Control AirPod dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 AirPod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum AirPod 5-gallon tank * RidePro E5 digital control * Dual compressors * 1/4 in. valves * Perfect for vehicles over 3,500 lbs.
( 1 )
$2,865.00
Spidertrax Off-Road Ultimate steering knuckles set the standard for rock crawling and rock racing performance. They now include 7/8 in. spherical bearings and 4340 Spider shoulder bolts across the line. In addition, they feature internal gussets on both upper outer knuckle and lower inner knuckle, adding crucial strength from extreme steering forces and those high impacts from jumps. Ultimate knuckles are designed for Ultimate unit bearings, Ultimate U-joints, and 4140 bolt-on high steer arms (sold separately). They install on any Spider 9 housing with 3 1/2 in. O.D. tubes. * CNC-machined: Tight tolerances are necessary for proper fitment. Post welding, all inner knuckles are CNC-machined. This provides not only a perfect 7/8 in. spherical bearing fit but a precise tolerance between upper and lower spherical bearings. No guesswork, no compromise. * 7/8 in. bolts and bearings: The spherical bearing assembly consists of a 4340 Spider shoulder bolt, shim washer, spherical bearing, shoulder washer, and Type C nut. Combined, each knuckle can withstand over 21,500 lbs. of axial loading and over 130,000 lbs. of radial loading. No grease, no weak links, no hassle. * 50 degrees of steering: An OEM-style 60 knuckle can turn only 38 degrees. Ultimate knuckles can turn all the way to 50 degrees, tighter than any steering knuckle on the market. Plus, the use of a 6-bolt interlocking chromoly steering arm makes them one of the strongest, as well (steering arms sold separately). * Internal gussets: Ultimate knuckles take performance to an all-new level with the addition of internal gussets. Upper outer knuckle gussets add critical strength for steering, while lower inner knuckle gussets add extra strength for those high sailing jumps. They're simply Spidertrax's strongest Ultimate knuckle yet.
Not Yet Reviewed
$2,199.00
RideTech RidePro E5 Air Ride Suspension Control AirPod single compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 AirPod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * AirPod aluminum 3-gallon tank * RidePro E5 digital control * Thomas compressor * 1/4 in. valves
Not Yet Reviewed
$2,615.00
Transform your Fox Body's handling with a RideTech 1979-93 Mustang Independent Rear Suspension System. It's no secret that independent rear suspensions (IRS) are superior in almost every way over a stick axle. The biggest concerns are cost and ease of installation. This independent rear suspension system replaces the stock live design with tubular upper and lower control arms utilizing custom-made spindles with S550 Mustang hubs. Camber, roll center, and toe angles were also optimized for greatly increased handling. The bolt-in design requires no welding for installation, as the IRS cradle is designed to mount to the rear frame rails and modified factory mounting points. If you want to optimize the rear suspension of your Fox Body Mustang, do it with this highly engineered IRS system so you can hit the track or street with confidence. Key features and benefits: * High-quality, no compromises manufacturing * Durable powdercoat finish for great looks and corrosion resistance * 100 percent bolt-in design requires minimal modifications * Lowers stance approximately 2 inches—reduces center of gravity without adversely affecting suspension geometry * Reduces upsprung weight creates premium ride quality * Low roll center (5 in.)—one degree of camber gain and zero bump steer inspires confident cornering for improved suspension geometry over OE suspension design and much more enjoyable to drive * 50 percent anti-squat provides excellent traction * Delrin control arm bushings eliminate deflection—no wheel hop, and no noise and no lubrication of bushings required * Retains factory track width * Compatible with mini-tubs (cradle attaches to the inside of the frame rails) * Modular design—works with Ridetech coil-overs or ShockWaves (sold separately), HQ and TQ (Triple Adjustable) versions are also available * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance Fitment Information: * Uses S550 (2015+) Mustang differential (not included)—new units can be purchased from Ford Performance, and Takeout units are also available * Uses shortened S550 (2015+) Mustang axles (not included)—standard strength are available from RideTech * Allows direct bolt-on of both stock SN95 Cobra (1999-2004) or S550 (2015+) rear OE or aftermarket brakes via Ridetech caliper brackets. * Works with 1999-2004 Cobra cat-back exhaust * Requires shortened drive shaft and pinion flange to U-joint adapter (use Sonnax part T35-ALFY-09 or T35-ALFY-10) * Works with Ridetech coilovers or Shockwaves, sold separately * Optional adjustable rate rear sway bar is available for additional fine-tuning
Not Yet Reviewed
$4,500.00
Flaming River 1960-65 Comet/Falcon power rack and pinion cradle kits add modern steering to your classic! These conversion kits require no cutting, drilling, or welding; they simply bolt into your vehicle's original mounting holes using basic hand tools. The units provide more than 6 in. of travel and a full turning radius—and are available with a floor shift or column shift tilt steering column, or no column at all. Flaming River power rack and pinion cradle kits are fluid- and pressure-tested before shipping. Order the model recommended for your Comet, Falcon, or Mercury application. Kits include: * Rack and pinion cradle system * Mounting hardware required for installation * Wiring connector * Universal joints and shafts * Power steering pump and pulley * Polished aluminum mounting reservoir
( 4 )
$2,859.99
—
$3,534.99
Flaming River 1967-68 Camaro power rack and pinion cradle kits can upgrade the steering system on your classic musclecar! These direct bolt-on systems are stronger, lighter, and more responsive than original equipment. Like Flaming River's manual setup, the power rack and pinion provides a quick steering ratio with full turning radius. The units install using the existing chassis locations on late '60s Camaros and Firebirds. They're available with or without the steering column.
( 1 )
$2,339.99
—
$2,706.99
Rock Jock High Steer Knuckle Kits for all Jeep JL and JT models is a game changer, packed with features that improve the off-road capabilities, as well as the on-road drivability of your vehicle! Intended for use on factory axles, these kits replace the inferior factory aluminum knuckles with cast iron high steer knuckles that exceed OEM quality and strength. They raise the tie rod 2 3/4 in. and the drag link 2 1/2 in., moving the rods out of the way of rocks and helping to restore factory steering geometry for improved drivability and overall road comfort on a lifted Jeep. The new knuckles also feature two adjustable steering stop locations for full lock-to-lock adjustability which helps ease the strain on steering components at full lock. Stock ball joints, unit bearings, axles, brakes and dust shields are all retained. Rock Jock's Currectlync steering included in these kits features revolutionary high articulation forged chromoly drag link that incorporates a unique organic shape with many compound curves—which can only be achieved via forging, resulting in maximum up-travel capabilities. The tie rod is a 42mm (1 5/8 in.) diameter chromoly tube. All Currectlync steering ends are forged steel and comparable in size to those found on modern 1-ton trucks. Given the dramatic geometry changes vehicle lifts impose, the kits include a trac bar geometry relocation bracket with a fully integrated: a) steering stabilizer shock mount, OR b) ram assist steering mount (depending on the kit you order). The trac bar mounting point is raised 2 1/2 in., to correct geometry, preventing any bump steer. * a) The steering stabilizer shock mounting point portion of the bracket moves the shock up and behind the new tie rod location, far from its vulnerable stock location. OR.... * b) The ram assist mount portion of the bracket provides an easy bolt-up anchor point for your hydraulic assist ram, as well as a lower skid plate, incorporated into the bracket, to protect the ram from rocks. Kits Include: * Left side high steer steering knuckle * Right side high steer steering knuckle * Currectlync Drag Link * Currectlync Tie Rod * Trac bar relocation and ram mount axle bracket -OR- Trac bar relocation and stabilizer shock mount axle bracket (depending on kit) * Stabilizer shock tie rod clamp -OR- Ram assist tie rod clamp (depending on kit chosen)
Not Yet Reviewed
$2,017.00
—
$2,450.00
Flaming River 1967-72 Chevy C-10 power rack and pinion cradle kits are an upgrade from your classic truck's original steering system. Their front steer power tubular-style rack and pinion features .98 in. rack shaft for increased strength and billet servo valve for cooler operation. These units are available with or without a GM-style steering column.
Not Yet Reviewed
$2,758.99
—
$3,249.99
Fox Racing Shox offers Factory Race Series 1.5 Zero IQS shocks for a variety of applications, including many late-model Ski-Doo snowmobiles. These lightweight Intelligent Quick Switch (IQS) kits are tuned specifically for harder backcountry riding with less fatigue, without compromising durability. The coil-sprung shocks are known for their range of control and supple ride through the chop and crust. This system is a peerless suspension package tailored specifically for your mountain sled. The electronically controlled suspension system allows you to adjust the performance of your sled in under a second. Depending on the conditions and terrain, tune your sled to provide optimal control and comfort in any situation. Never take a break to adjust suspension again, thanks to iQS. Fox designed the coil-sprung mountain shocks with two primary objectives: weight reduction and ride performance. They optimize the 1.5 Zero coil-sprung shocks through material reduction without a sacrifice of ride quality or structural integrity. Additionally, the coil springs were redesigned to retain the same spring rate but with fewer coils and are built from a lighter steel alloy. The shocks maintain a linear feel regardless of temperature fluctuation, which keeps your sled setup quick and simple. The new coils result in a spring with the same performance at half the weight. Fox's position-sensitive damping technology, with origins in desert truck racing, is now applied to the Factory Race Series coil-sprung shocks. Spiral grooves inside the shock allow the oil to flow around the main piston, reducing damping force in the ride zone for a plush feel. The bypass grooves terminate through the final 30 percent of the travel, forcing oil to only flow through the main piston and providing a significant increase of bottom-out resistance to cushion any hard hits. Fox iQS is an electronic modal damping control system. This system comprises a Bosch Electronic Control Unit (ECU), custom wiring harness, and electronically actuated valves integrated into each shock: The 3-button switch mounted to your handlebar puts you in command of four unique shock modes. Each mode changes the character and balance of your sled by adjusting the compression damping of each shock. Are you scaling a near-vertical wall? Utilize lockout mode for better floatation and steering control. Lockout your rear track shock to prevent unwanted weight transfer to the rear to keep the sled planted when you twist the throttle. Worn out from a great day on the peaks and ready to motor back to the truck? Engage soft mode for a plush ride down the mountain. Between lockout and soft are settings to cover the full spectrum of riding from high-flying action to quick transitions boondocking through the trees. Experience a new sense of control on the snow due to less outboard weight.
Not Yet Reviewed
$4,499.95
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$4,485.00
—
$4,874.00
Enjoy driving your fat-fendered cruiser with the smooth ride and handling of independent suspension. Heidts Superide II independent front suspension kits utilize a Mustang II spindle to allow for a front mount rack and pinion unit, making engine installation much easier. The upper control arms use threaded adjusters for the wheel alignment. Unlike eccentric adjusters, they will never slip or lose alignment when hitting bumps in the road. Dozens of packages are available for applications from 1935 and up. Components include: * Heidts 3-piece crossmember * Mustang II stock spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, front mounted * Billet single adjustable coilover shocks with silver powdercoated springs
( 1 )
$4,826.00
—
$4,923.00
ADS Race MBR coilovers feature Multi-Stage Bypass Ring technology--a genuine multi-stage bypass system where each zone is independently adjustable via a positive stop helix system. This ensures ample flow, like 7-tube external bypasses on 16 in. stroke variations, and internal free bleed ports enable tuners to optimize the damping curve for specific vehicle needs. A true top-out zone provides both mechanical and hydraulic damping, guarding against shock damage during full extension in harsh conditions, although the use of limit straps is recommended for racing and severe use. Additionally, the 4-way adjustable reservoir allows independent high and low-speed adjustments for compression and rebound events. A dual hose system establishes a genuine recirculating fluid path to the reservoir, maximizing fluid cooling with internal diverters, ensuring fluid flow across the entire shock body for enhanced cooling efficiency. Each unit undergoes vacuum bleeding and features full synthetic fluid to reduce fade and extend product life. Select the stroke needed for your vehicle. Features: * Large 2.5 in. reservoirs increase fluid capacity to aid in cooling * High-temperature seals prevent blow-by, ensuring consistent performance across a wide temperature range * Threaded end caps prevent contamination from external sources * 3-stage urethane seal package delivers unmatched sealing performance, suitable for extreme cold snow-ridden trails and scorching deserts alike
Not Yet Reviewed
$2,049.95
—
$4,799.95
PSC Big Bore XD steering gears are direct replacements for your inadequate steering gear. They feature larger piston diameters, which increase the torque output of the steering gear—allowing your rig to overcome steering issues due to larger tires and/or locking differentials that you've installed. PSC Big Bore XD units are assembled using all new components and featuring their exclusive new gear housing--not reworked core housings, but 100 percent new cast and machined housings. PSC also offers cylinder-assist versions for vehicles that have 38 in. and bigger tires and larger drivelines. Order the steering gears designed for fitment with your make and model.
( 25 )
$2,250.00
When it comes to getting everything you need to complete your air suspension system, sometimes getting everything you need in a comprehensive package is the best route to take. At AccuAir, they do the heavy lifting for you and offer everything you need to get started with your air ride system with their Air Suspension Starter Packages. AccuAir Suspension Starter on-board air compressor systems include an ENDO-T air tank and an e+ Connect, which includes an ECU+, wireless switch box, and e-Level+ app, making them the perfect introductory kits for anyone looking to get a high-quality air management system without breaking the bank. Features and contents: * ENDO-T tank, 5 gallon weld-free, leak-free, bolted aluminum construction with raw finish, precision machined aluminum components, ports are machined directly into the solid aluminum body and are flush with the outside of the tank, modular construction allows the end-caps to be removed allowing for never before imagined feature combinations to go inside the tank * e+ Connect allows wireless control over your air suspension system through the e-level+ app * Long-range Bluetooth 5.0 * VU4 4-corner solenoid valve unit with 1/4 in. NPT ports * 3/8 in. DOT/PTC fitting kit: -- 50 ft. 3/8 in. DOT nylon air line -- Black moisture trap/filter -- Fittings -- Loctite 565 anaerobic thread sealant * VIAIR 485C dual air compressors * Compressor power kit * Wiring harnesses are 100 percent plug-and-play
Not Yet Reviewed
$2,599.95
ADS Race MBR smooth body shocks feature Multi-Stage Bypass Ring technology--a genuine multi-stage bypass system where each zone is independently adjustable via a positive stop helix system. This ensures ample flow, like 7-tube external bypasses on 16 in. stroke variations, and internal free bleed ports enable tuners to optimize the damping curve for specific vehicle needs. A true top-out zone provides both mechanical and hydraulic damping, guarding against shock damage during full extension in harsh conditions, although the use of limit straps is recommended for racing and severe use. Additionally, the 4-way adjustable reservoir allows independent high and low-speed adjustments for compression and rebound events. A dual hose system establishes a genuine recirculating fluid path to the reservoir, maximizing fluid cooling with internal diverters, ensuring fluid flow across the entire shock body for enhanced cooling efficiency. Each unit undergoes vacuum bleeding and features full synthetic fluid to reduce fade and extend product life. Features: * Large 2.5 in. reservoirs increase fluid capacity to aid in cooling * High-temperature seals prevent blow-by, ensuring consistent performance across a wide temperature range * Threaded end caps prevent contamination from external sources * 3-stage urethane seal package delivers unmatched sealing performance, suitable for extreme cold snow-ridden trails and scorching deserts alike
Not Yet Reviewed
$4,499.95
Motorcraft steering gear boxes will restore effortless turning. These remanufactured units include new sector shafts, and gear housings that do not meet stringent standards are replaced with new. The process includes precise ball sizing—not a one-size-fits-all approach—to ensure the correct amount of steering effort, reducing play in the steering. All replacement parts are 100 percent original equipment. Choose the right replacements for your Ford, Lincoln, and Mercury steering systems; make your choice a Motorcraft steering gear box.
( 14 )
$2,389.99
—
$2,845.99
GSI Machine and Fabrication offers Air Ride bolt-on front suspension kits for a variety of applications—including many 1960s and '70s era Chevrolet trucks. These 100 percent bolt-in front crossmember kits include all the necessary components to replace your old worn-out suspension with new, modern air ride. Custom-designed tie rod adapters require no modification to the spindle; while narrowed track width facilitates driving and turning low. Wheel position has been moved forward 1 in. to center the wheel in the wheel opening; and upgraded steering powers rack and pinion. Kits are designed to use "clamshell" style motor mounts with a GM 350 engine; LS, LT, and big block engines are compatible with the use of GSI motor mount adapters (available separately). Everything has been carefully planned and designed to obtain the best drivability and easiest installation possible. Notes: * When installing an LS-based engine, the use of an F-body style oil pan is required * The rack and pinion unit is a late '80s Mustang-style with a 3/4-36 spline * Removal of inner fender well is required * Power steering hoses and fittings can be found at most speed shops or online retailers * Recommended wheel specs: 8.5 in. wide with 5.5 in. backspace or 9 in. wide with 6.0 in. backspace * Misc steering parts such as U-joints and shafts are not included * Designed around 71/72 C10 spindles, making this front end compatible with several brake kits Key features: * Re-engineered suspension and steering geometry * Raised crossmember for increased ground clearance * 61 in. track width * 8.5 in. adjustable suspension lift * Built-in limit stops * Updated steering to power rack and pinion unit * Easy alignment with eccentric cams at all four lower control arm pivots * Designed to lay frame when using up to a 30 in. tall tire
Not Yet Reviewed
$4,499.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
