Availability
Showing In Stock Items. Show All 229 Items.
RideTech bolt-on 4-link systems provide a lowered ride height with smooth handling. They include the link bars with rubber bushings, powdercoated brackets, and optional front upper or lower controls arms, depending on the vehicle application. The suspension systems require no welding or cutting, making installation easy. Order the kit designed for fitment on your year/make/model.
( 8 )
$2,025.00
—
$2,895.00
QA1 rear suspension conversion systems provide easy, bolt-in options to replace your coil springs on factory truck arms—without any cutting, welding, or other fabricating. Each kit contains frame brackets, axle brackets, linkage assemblies, a crossmember assembly, and necessary hardware. The conversions are available with coilovers or available for use with the factory springs. Order the model designed for fitment on your specific vehicle, and enjoy the stance, handling, and suspension performance of a revolutionary QA1 system.
( 18 )
$2,795.95
—
$3,101.95
Clearance
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$4,099.99
—
$5,479.99
$2,549.50
—
$3,372.50
RideTech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with RideTech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck
Not Yet Reviewed
$3,995.00
BDS Suspension steps up the performance and capability of your truck or Jeep with their Fox 2.0 lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of Fox 2.0 IFP (internal floating piston) gas shocks, BDS lift kits may also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. Some kits may contain other upgrades along with the Fox 2.0 shocks/struts for improved strength and handling. Select the BDS lift kit engineered for your vehicle. Fox 2.0 Performance Series shocks: * 2 in. impact extruded aluminum body * Internal floating piston (IFP) monotube design * CNC-machined 6061 T-6 aluminum mounting ends * Massive 5/8 in. hard chrome plated heat-treated alloy steel shaft * Race-developed high-flow piston design * Application-specific valving to maximize performance * Long-lasting clear anodized finish
Not Yet Reviewed
$2,369.60
—
$3,356.35
BDS Suspension steps up the performance and capability of your truck or Jeep with their NX2 Nitro shock lift kits. Designed to improve stance, each kit includes the necessary components to set your vehicle up right with clearance for larger tires at an affordable price. Featuring a set of NX2 Nitro Series shocks, BDS lift kits will also include either ProRide coil springs for improved ride quality and more articulation, Glideride leaf springs to provide full lift height and increased capacity, or steel blocks and add-a-leaf for a level stance from front to rear. They may also include other upgrades that add strength and improved handling. Select the BDS NX2 Nitro shock lift kit engineered for your vehicle. NX2 Nitro Series shocks: * Nitrogen-charged * Twin-tube design * 10-stage velocity-sensitive valving * Dual-welded ends for increased strength * 1 3/8 in. high-flow piston * Self-lubricating seals * Silver powdercoat finish
( 1 )
$2,153.60
—
$2,756.35
Speedtech Performance USA torque arm rear suspensions dramatically improve performance handling and everyday drive quality of your leaf spring car. Unique in their design, the suspensions virtually eliminate the inherent change in geometry and possible traction issues commonly associated with leaf spring and 3- or 4-link type systems. Relatively easy to install and reasonably priced, they're perfect rear suspension upgrades to a well-matched performance front suspension. Speedtech Performance USA torque arm rear suspension facts and features: * Adjustable ride height, roll center, pinion angle, instant center, and wheelbase * Articulate lower control arms aid in eliminating suspension bind * Panhard bar mounting system accurately locates rear axle and allows for instant center adjustability * Delrin bushings eliminate the flex of rubber and squeak of poly bushings * QA1 double adjustable coil-over shocks with thrust washers * Coilover shocks allow 2 1/2 in. of ride height adjustment * Available for 9 in. Ford, 12-bolt and 10-bolt GM differentials * Optional complete rear axle with all brackets installed
Not Yet Reviewed
$3,430.96
—
$3,692.63
Flaming River Chevelle power rack and pinion cradle kits offer classic bolt-in technology. These power cradle kits mount in your chassis' existing factory holes--no cutting, drilling, or welding is required--and basic hand tools get the job done easily! Add a lighter, more responsive steering system with a full turning radius to your classic vehicle, with American-made Flaming River Chevelle power rack and pinion cradle kits. Many Chevelle rack and pinion kits are delivered with: * Patented rack and pinion cradle system * Mounting hardware * Wiring connector * Universal joints * Power steering pump * Pulley * Shafting * Reservoir * Billet swivel floor mount * Sway bar for added stability * On some models, painted or polished tilt steering columns are available options
( 1 )
$2,302.99
—
$3,469.99
Drivers who demand precision steering capabilities on their half-century old restorations take notice at the mere mention of Flaming River 1963-64 Impala power rack and pinion cradle kits. These components provide a full lock-to-lock turning radius with an adjustable pinion angle. A travel bar design properly positions steering pivot points to the original location and delivers the original turning radius. These kits feature a stabilizer guide clamp for added stability when driving, and use the factory tie rods to connect the travel bar to your vehicle's spindles. The cradle kits install with basic hand tools in the original mounting holes for the steering box and idler arm assembly—no cutting, drilling, or welding is required. (Some models do not include column and/or power steering pump.) Power rack and pinion kits, designed for a floor shift column, include: * Mounting hardware * Wiring connector * Universal joints * Rack and pinion cradle system * Aluminum mounting reservoir (hoses sold separately) * Tilt column (available on some models)
Not Yet Reviewed
$2,420.99
Upgrade your classic truck to a modern driving feel and performance with QA1's 1963-1972 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while reducing weight 140 lbs. over stock. Order the QA1 1963-72 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Adjustable Shock Valving: Double-adjustable shocks offer independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement
( 4 )
$4,450.95
—
$4,650.95
Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement
( 1 )
$4,450.95
—
$4,650.95
"Now, that's a truck!" McGaughy's Black SS suspension lift kits give your rig a "real" lift. The kits are available for 6 to 10 in. of lift to boost your truck's stance and your ego. The elite adjustability is possible with the included front struts and because McGaughy's drops the crossmember and differential a full 7 in. This keeps your CV axles' angles, suspension geometry, and steering geometry at factory specifications. To keep these performance lifts looking good, they receive a durable, glossy black powdercoated finish. Plus, the front crossmember is accented with highly polished stainless steel inlays. Install one of McGaughy's SS lift kits, and the next time you hear, "Whoa, what a truck!" it will be referring to yours! McGaughy's SS suspension lift kits may include: * Lift spindles * Adjustable front struts or extenders * Crossmembers * Lower A-arm support rods * Tie rods * Sway bar drops and extenders * Skid plate * Fabricated lift blocks * Bump stop extenders * Brake line extenders * Rear shocks or extenders * U-bolts and necessary hardware
( 2 )
$2,832.99
—
$3,299.99
RideTech Ford F-150 suspension lowering kits are front and rear packages offered for 4WD and 2WD models. They will lower your Ford up to 3 in. up front and 5.5 in. in the rear, turning your vehicle into a high performance muscle truck with better stance, handling, and ride quality. These RideTech kits are 100 percent bolt-on, fully adjustable, and include everything you need to lower your Ford F150 platform. Features, benefits, and contents: * Lowered stance -- Adjustable ride height -- 3 in. front drop -- 5 in. rear drop * Improved ride quality and sharper handling * New tubular upper control arm provides camber and caster improvements at lower ride height to improve handling * Adjustable Ridetech/Fox shocks -- Coilover front/HQ Series rear -- Aluminum body -- Monotube/gas pressure -- Adjustable valving * Bolt-on installation -- No welding * Adjustable ride height -- Front coilovers adjustable spring seats -- Rear leaf shackles offer 2 in. of adjustment
( 2 )
$2,745.00
QA1's handling suspension kits provide a full-vehicle upgrade that fits your needs. Available in three different levels of performance, you can build your car in stages, using QA1's parts list as a road map to get to the level of performance you want and have peace of mind knowing you won't have compatibility issues. Greater control and improved cornering are key benefits of QA1 Level 2 handling suspension kits. They're designed to boost performance and include a more extensive assembly of components than Level 1 kits. They offer easy bolt-on installation and full compatibility with the OEM parts you attach them to. All QA1 handling suspension kits are available with or without shocks and struts—giving you the flexibility to obtain the shocks or struts and spring rates you desire. Select the kit designed for your vehicle.
( 10 )
$2,000.95
—
$3,609.95
QA1 1988-98 C1500 level 2 front coilover conversion systems are a great upgrade to your C1500 front suspension. Each kit comes with QA1's proven single adjustable Pro Coil coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. The shocks allow for wider wheel and tire combos, ride height adjustability, and are 100 percent dyno-tested and serialized. The QA1 C1500 upper and lower control arms are manufactured from 12-gauge HSLA steel tubing for increased strength and are powdercoated for long-lasting durability. The kit will provide a total of 4 in. of drop when used with drop spindles, or 2 in. of drop with factory spindles. Performance ball joints and low-friction, maintenance-free bushings are standard. Level 2 easy bolt-on kits will add more stability and allow for optimum camber adjustment in a lowered truck. Everything you need is included, all the way down to the hardware; no welding required.
( 7 )
$2,219.95
When it comes to getting everything you need to complete your air suspension system, sometimes getting everything you need in a comprehensive package is the best route to take. At AccuAir, they do the heavy lifting for you and offer everything you could ever want for your air ride system with their Air Suspension Ultimate Packages. AccuAir Suspension Ultimate on-board air compressor systems include an ENDO-VT air tank and an e+ Connect, which includes an ECU+, wireless switch box, an e-Level+ app, height sensors, and TouchPad+, making them the perfect top-of-the-line kits for anyone looking to get the best components for their air suspension management. Features and contents: * ENDO Valve-Tank, 4-corner, 5 gallon weld-free, leak-free, bolted aluminum construction with raw finish, precision machined aluminum components, and valves integrated into the air tank allowing for quicker installs and an overall cleaner presentation in your trunk, truck bed, or anywhere else you choose to mount your tank * e+ Connect allows wireless control over your air suspension system through the e-level+ app * e+ Height upgrades e+ Connect to e-Level+ with the addition of preset heights via included height sensors, harnesses, and hardware * e+ TouchPad: Connects to e+ECU for a hardwired interface, allows easy control of your suspension from the palm of your hand, magnetic mount TouchPad has an integrated compressor status indicator which is an LED indication of the status of your compressor(s) * Long-range Bluetooth 5.0 * 3/8 in. DOT/PTC fitting kit: -- 50 ft. 3/8 in. DOT nylon air line -- Black moisture trap/filter -- Fittings -- Loctite 565 anaerobic thread sealant * VIAIR 485C dual air compressors * Compressor power kit
Not Yet Reviewed
$3,499.95
QA1 1965-79 F-100 coilover conversion systems are suspension kits built with a purpose—just like your truck! With these all-new, engineered-from-scratch systems, you can stop using junkyard parts to modernize your pickup, and instead bolt in the handling and performance you've always wanted. The front systems are 3.75 in. narrower than a Crown Vic, providing ideal handling and allowing fitment of larger wheels and tires. They also save 150 lbs. of weight and provide 3 in. to 5 in. of drop with standard spindles and 5 in. to 7 in. with drop spindles. QA1 1965-79 F-100 coilover conversion systems are available in single and double adjustable styles with everything you need included, except engine mounts. Included in the systems: * Adjustable shocks * High-travel springs * Coil-over hardware * Upper and lower control arms * Upper and lower crossmembers * Rack and pinion steering * Stock or drop spindles * All required nuts, bolts, etc.
( 7 )
$4,162.95
—
$4,732.95
Already have a QA1 coil-over conversion system on your C10? QA1 C10 crossmember retrofit kits add powered rack and pinion steering, offers 2 in. of additional drop range (up to 8 in. total), and saves an additional 70 lbs. of weight. These bolt-in upgrades improved drivability and steering feel while achieving the perfect stance. Choose the kit for your model year. Features and benefits: * Powered rack and pinion steering -- Provides quicker and tighter steering, plus increased steering angle when fitting larger wheels and tires and improve geometry for enhanced drivability. * Improved ground clearance -- The tubular design makes your under cab rails the truck's lowest point. Updated lower shock mounts add clearance and new upper shock mounts increase travel for a great ride and performance, even at lower ride heights * Compatible with existing QA1 coilover systems -- Easily swap out a few components on your existing QA1 shocks and control arms, allowing you to upgrade your truck in stages, starting with coilovers and control arms * Easy, bolt-in installation -- The crossmember comes powder coated and ready to install, no cutting or welding your frame. It easily locates the steering rack, and you can choose mounts (sold separately) for common engines.
( 1 )
$2,450.95
QA1 1965-72 F-100 rear coilover conversion systems offer unprecedented adjustability and maximum performance without any binding issues, and the ability to achieve a 4 in. to 7 in. drop. These bolt-in systems can be installed without removing the bed and everything you need is included, right down to the hardware. Kits are available with single or double adjustable shocks, and some specific kits include QA1 MOD Series coilovers. Included in the systems: * Adjustable shocks * High-travel springs * Coil-over hardware * Adjustable trailing arms * Adjustable panhard bar * Panhard bar brace * Adjustable torque arm * Torque arm axle mount * Torque arm crossmember * All required nuts, bolts, etc.
( 4 )
$2,791.76
—
$3,101.95
Flaming River 1988-98 Chevy C1500 truck power rack and pinion cradle kits are direct bolt-ins with precision welded cradles manufactured using a 3/8 in. steel plate to assure there is no flexing. Each kit adapts to the original steering column and includes a new slip shaft with U-joints and a hose kit. They have been designed for use with the original power steering pump and the travel bar maintains original geometry. Features: * Designed for use at factory ride height or with 4/6 lowering kit * Solid plate 3/8 in. steel for increased strength * Bolts in place of steering box and idler arm using OE mount locations * Precise, modern steering with no cutting, drilling, or welding to chassis * Features new front steer power rack and pinion * Rack and pinion features .98 in. rack shaft for increased strength * Billet servo valve for cooler operation * Lifetime serviceability and Flaming River tested and certified Power rack and pinion cradle kit includes: * Mounting hardware * Universal joints and shafts * Rack and pinion cradle system
Not Yet Reviewed
$2,508.99
QA1 1988-98 C1500 rear coilover conversion systems are a great upgrade to your C1500 suspension. Each kit comes with QA1's proven adjustable coilover shocks—so you can change the valving to meet your specific needs—along with a variety of spring rate options. These shocks allow for ride height adjustability and are 100 percent dyno-tested and serialized. The QA1 C1500 torque arm suspension with C-notch bracket is manufactured from 12-gauge HSLA steel tubing for increased strength and powdercoated for long-lasting durability. Systems come complete with adjustable instant center, panhard bar, and pinion angle to allow you to adjust the system to your exact needs. This easy bolt-on kit will add more stability and allows for optimum camber adjustment in a lowered truck. Everything needed is included, all the way down to the hardware; no welding or bed removal required.
( 3 )
$2,791.76
—
$2,887.95
UMI Performance Stage 2.5 handling kits bring you the best of both worlds—combining UMI's Stage 2 handling kit with four-corner Viking coilover ride height adjustability. These Stage 2.5 handling kits feature UMI's most popular combination of front and rear springs, along with all the necessary components and hardware needed to transform your GM vehicle for improved handling, ride quality, and an impressive stance. Ride height is adjustable from stock to 2 in. below stock ride height, and the Viking shocks feature 19 settings in both compression and rebound. More than a dozen kits are available, with numerous options. Select the model recommended for your vehicle. Stage 2.5 handling kits include: * Tubular lower front A-arms with polyurethane bushings * Upper front A-arms with Delrin© bushings * Viking coilover kit * Heavy-duty front sway bar with new bushings and end-links * Front upper and lower race-quality hardware kit * Solid heat-treated rear sway bar * Tubular rear lower control arms with polyurethane bushings * Tubular rear upper control arms with polyurethane bushings * Tubular frame braces with hardware * Replacement rear-end housing bushings * Rear control arm race-quality hardware kit * UMI bolt-on rear coilover kit * Thrust bearing kit (x 2) * Spanner wrench kit Note: Rear coilover kit fits GM axle housing only. Aftermarket axle housing fitment is not guaranteed.
Not Yet Reviewed
$4,369.99
—
$4,649.99
Flaming River 1965-70 Mustang power rack and pinion cradle kits can upgrade your classic Pony's steering system. The patented conversion kits are stronger, lighter, and more responsive. They also retain the full factory turning radius and offer more travel than your OE system! Mustang power cradle kits feature a welded cradle that bolts right in—no cutting, drilling, or welding is required! They're available to fit with the original or Granada spindles, and come with or without columns that are paintable or polished. Each kit also includes mounting hardware, wiring connectors, universal joints, a power steering pump, a billet bracket and pulley, and a polished aluminum reservoir. All are fluid and pressure-tested before shipping. Order the model recommended for your Mustang application.
( 8 )
$2,019.99
—
$3,374.99
Flaming River 1963-66 Corvette power rack and pinion cradle kits improve horsepower, performance, and road handling. The kits include hardware, universal joints, cradle, and quick-ratio rack and pinion. The all-new components bolt into existing chassis and original mounting locations with no suspension modification, providing a stronger rack shaft, a longer cylinder and overlapping tube design, and more than 6 in. of travel for full-turning radius.
( 1 )
$2,486.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
