Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
58 Results Found For "power"
Banks Power Ford 1999-2006 6.8L PowerPack Systems
Banks Power Ford 1999-2006 6.8L PowerPack systems will strengthen your truck's muscle and durability with impressive gains in horsepower and torque. Banks designed these kits to provide you with more hauling muscle. Banks manufactures these kits from quality materials to ensure performance and durability. Kits include the following components: * Ram Air intake with air filter housing, lifetime filter, and service kit * Stainless steel heat-shielded TorqueTube exhaust manifolds with PowerPickle pulse converter * Stainless steel Y-pipe assembly with seamless Y-collector * 3.50 in. stainless steel muffler, tailpipe, and a 4.00 in. polished stainless steel exhaust tip
Not Yet Reviewed
$2,459.00
—
$2,559.00
Banks Power Ford 1997-2008 6.8L V-10 Class C Motorhome PowerPack Systems
A Banks PowerPack system for your Ford V-10 Class C motorhome is the airflow, exhaust, and fuel flow solution you've been looking for. If the performance of your V-10 is less than motivating and its fuel economy has stalled your travel plans, it's time to add some "Banks Power" your coach! Their Ram Air transfer tube and intake with a Super-Scoop combine for a 40 percent improvement in airflow, while the stainless Monster exhaust and TorquTubes exhaust manifolds with a patented PowerPickle maximize torque. You now have more power to pass, merge, and climb hills. Systems with OttoMind engine calibration modules are more efficient, and that equates to increased mpg!
Not Yet Reviewed
$2,769.00
Banks Power Ford 1997-2005 6.8L V-10 Class A Motorhome PowerPack Systems
Is your motorhome "shift-happy"? If so, Banks PowerPack systems can give your Ford 6.8L V-10 Class A coach a whole new attitude! With a swift kick of performance, Banks PowerPacks optimize your engine's airflow for increased power, prolonged engine life, and better mileage. The systems include proven bolt-on power adjusters like: Ram Air with a Super Scoop; stainless heat-shielded 5-tube TorqueTube exhaust manifolds—with a patented PowerPickle pulse converter; a low-restriction Dynaflow muffler; and a Monster exhaust with a tailpipe and tip. An OttoMind engine calibration module may be included, depending on the application. All of these components pack the power for all speeds under all conditions with plenty of torque when you need it the most. Plus, they can raise your average mpg by 7.4 percent! You can end the shift-happy behavior of your Ford V-10 motorhome with a Banks Power PowerPack system.
Not Yet Reviewed
$3,009.00
Eddie Motorsports V-Drive V-Belt Pulley Drive Systems
Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.
( 2 )
$2,008.95
AJE Suspension Mustang Tubular K-Member Complete Swap Kits
Are you swapping in a new engine to your Mustang? If so, AJE Suspension Tubular Mustang K-member swap kits should be your choice to drop the engine you want under the hood of your pony. These swap kits are produced exclusively by AJE Suspension with bolt-in K-members that fit your Mustang and the necessary motor mounts to mount any engine--Chevy or Ford! First, AJE motor mounts are stronger than factory setups, so they can handle the power of your turbos and blowers. Second, their K-members are crafted from steel. They offer no bent tubes and triangulated load paths to deliver the strength that you need without adding extra weight that you don't need, as well as extra header/oil pan clearance! The swap kits also include A-arms, coil-over spring kits, and, depending on the application, caster/camber plates. One last thought--if you decide to part with your pony and keep your engine, you'll have plenty of interested parties, as the new buyer can mount any engine they choose without changing the K-member. Why waste money on K-members that mount only one family of engines? Compare price, quality, and design--you'll be ready to update your pony with the suspension technology of AJE Suspension tubular K-member complete Mustang swap kits.
( 13 )
$3,006.99
—
$3,027.99
GSI Machine and Fabrication Air Ride Bolt-On Front Suspension Kits
GSI Machine and Fabrication offers Air Ride bolt-on front suspension kits for a variety of applications—including many 1960s and '70s era Chevrolet trucks. These 100 percent bolt-in front crossmember kits include all the necessary components to replace your old worn-out suspension with new, modern air ride. Custom-designed tie rod adapters require no modification to the spindle; while narrowed track width facilitates driving and turning low. Wheel position has been moved forward 1 in. to center the wheel in the wheel opening; and upgraded steering powers rack and pinion. Kits are designed to use "clamshell" style motor mounts with a GM 350 engine; LS, LT, and big block engines are compatible with the use of GSI motor mount adapters (available separately). Everything has been carefully planned and designed to obtain the best drivability and easiest installation possible. Notes: * When installing an LS-based engine, the use of an F-body style oil pan is required * The rack and pinion unit is a late '80s Mustang-style with a 3/4-36 spline * Removal of inner fender well is required * Power steering hoses and fittings can be found at most speed shops or online retailers * Recommended wheel specs: 8.5 in. wide with 5.5 in. backspace or 9 in. wide with 6.0 in. backspace * Misc steering parts such as U-joints and shafts are not included * Designed around 71/72 C10 spindles, making this front end compatible with several brake kits Key features: * Re-engineered suspension and steering geometry * Raised crossmember for increased ground clearance * 61 in. track width * 8.5 in. adjustable suspension lift * Built-in limit stops * Updated steering to power rack and pinion unit * Easy alignment with eccentric cams at all four lower control arm pivots * Designed to lay frame when using up to a 30 in. tall tire
Not Yet Reviewed
$4,499.99
Strange Bolt-In S60 Rear Differential Assemblies
Strange bolt-in S60 rear differential assemblies are designed to fit your vehicle without any modifications. Brake kits are sold separately. Assemblies feature: * Strange-designed S60 housing cast from nodular iron * Large nodular iron bearing caps * One-piece center casting for enhanced rigidity * Adjuster nuts for precise and easy setup * Fully welded tubes * Strange ring and pinion gear * 35-spline axles
( 4 )
$3,494.99
On Sale
UniSteer Rack and Pinion Conversion Kits
From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.
( 10 )
$2,683.99
$2,415.59
Eddie Motorsports S-Drive Serpentine Pulley Drive Systems
Eddie Motorsports S-Drive serpentine pulley drive systems are the latest advancement in engine accessory kits on the market. These drive system pulleys and brackets are CNC-machined from 6061 T-6 aluminum and include stainless steel fasteners, as well as other necessary accessories: water pumps, alternators, serpentine belts, A/C compressors and tensioners. Change the efficiency of your engine with a single 6-rib serpentine belt to drive all of your accessories. Note: Not for applications with VVT.
( 19 )
$3,108.95
Scott's Hot Rods IFS Packages
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$3,682.99
BendPak RJ9W Rolling Lift Bridge Jacks
BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)
Not Yet Reviewed
$4,295.00
Vintage Air Gen-V SureFit Systems Complete Kits
Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel
( 8 )
$2,276.99
—
$2,858.99
American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits
American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness
( 1 )
$4,395.00
—
$4,485.95
BendPak RJ7W Rolling Lift Bridge Jacks
BendPak RJ7W rolling lift bridge jacks are made for an HDS-14 Series four-post lift, so you can turn your 4-post car lift into an on-the-car wheel service dynamo! The scissor-style jacks offer peerless speed and versatility, making automotive service such as brake jobs and suspension work a cinch. The RJ7W rolling lift bridge jacks features an exclusive telescoping design to accommodate the BendPak HDS-14 Series 4-post lift with adjustable-width runways, precision sliders, and rollers, enabling you to position the hydraulic jacks exactly where you need them. Additional product features: * 7,000-lb. lifting capacity * Easy-roll wheels * Three safety-lock positions * Stackable adapters to provide added clearance when needed * Rubber contact pads * High-pressure hydraulic power unit * Optional airline kit available
Not Yet Reviewed
$2,595.00
iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches
iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit
Not Yet Reviewed
$3,770.00
DiabloSport Modified PCM and Trinity 2 EX Platinum Packages
DiabloSport Modified PCM and Trinity 2 EX Platinum packages are the most advanced performance programmer and monitoring setups available for a large range of applications. Featuring a high-resolution, 5 in. capacitive touch screen, full swipe functionality, industry-leading gauge designs, jaw-dropping power potential, and powerful, yet simple, user interface. Each of these performance kits include an unlocked PCM, so you can tune in no time and keep your stock PCM safe and unaltered. And even though DiabloSport T2 Platinum programmers are already equipped with some of the best tuning capabilities right out of the box, they know you want to bolt-on upgrades and extract every bit of horsepower possible from your vehicle. That's where CMR custom tuning comes in. DiabloSports's nationwide network of CMR custom tuning dealers can build tunes for your specific ride on a dyno or by using the built-in data logging features of the Trinity. Pre-loaded, high performance tunes, in addition to custom tuning capabilities; it's the best of both when you choose to unlock your vehicle's potential with DiabloSport Modified PCM and Trinity 2 EX Platinum packages.
( 1 )
$2,049.95
—
$2,254.95
Ranger R980XR Tire Changers
Ranger R980XR tire changers are space-savers that perform basic tire changes quickly and safely. They install flush against the wall, so it stays out of the way, and the included non-marring duck heads are perfect for a wide variety of wheels. Designed to perform and built to last, R980XR tire changers are equipped with powerful motors and gearboxes to work systematically at a controlled speed for easy tire removal and installation. The ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending, and large storage trays provide ample space for accessories. Features: * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Brush * Alloy steel mount/demount head * Plastic polymer mount/demount head * Oiler/lubricator * Air regulator * Breaker bar * Large soap/lubricator bucket
Not Yet Reviewed
$4,795.00
iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches
Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit
Not Yet Reviewed
$4,070.00
Strange Floater Kits
Strange floater kits have become the standard for Pro Mod classes, blown alcohol classes, and other high-horsepower abusive drag racing applications. The Strange floater kits are designed for use with 40-spline axles due to the tremendous increase of torsional strength. Upgrade your floater kit to include the standard brake system, or choose the carbon fiber option for maximum stopping power. Building a 6-second, 230-plus mph race car? Try one of these Strange floater kits and put a bulletproof assembly to the test. Strange floater kits include: * Your choice of 8.5 in. or 13.5 in. 4130 chromoly steel spindles * Steel drive plates * Aluminum hubs * Forged steel slotted rotors * Timken bearings * Seals * chromoly wheel studs * Steel lug nuts
( 1 )
$3,211.99
—
$3,316.99
American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits
American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern
Not Yet Reviewed
$4,750.95
—
$4,995.00
ATI Street Rod Transmission Packages
Take the guesswork out of which parts to buy and save money with ATI Street Rod transmission packages! Choose from several applications that include one of ATI's Street/Strip transmissions, a Streetmaster torque converter, a transmission cooler, and a "Trick Stick" locking dipstick and tube. Available with a variety of transmission options and components, these ATI Street Rod transmission packages can handle the power of your high performance engine and transfer that power to the rear differential.
Not Yet Reviewed
$3,419.99
—
$4,779.99
Ranger RP-20FC Oil Filter Crush Presses
Ranger RP-20FC oil filter crush presses can apply 10 tons of pure, air-operated pressure to just about any used oil filter or can--easily reducing it to 25 percent of its original size and removing 95 percent of the oil. An integrated collection chamber and collector downspout makes oil recovery a cinch. At the drastically reduced size, cans and oil filters are much cheaper to dispose of, so these presses are great for the environment and your bank account. They're perfect for crushing light-duty truck and automotive filters; even the popular 8 in. tall filters for Cummins and Powerstroke diesel-powered vehicles fold beneath the massive weight of these presses.
Not Yet Reviewed
$2,475.00
Scat Modern Muscle Engine Rotating Assemblies
Scat Modern Muscle engine rotating assemblies are available with high-quality Scat forged 4340 crankshafts and I-beam or H-beam connecting rods with 7/16 in. cap screw bolts. For maximum power and reliability, Scat adds rod and main bearings from King, Federal Mogul, or Clevite 77, depending upon the application, and pistons and piston rings made by such well-known manufacturers as SRP/JE, Ross, KB, Mahle, Diamond, and Probe.
( 3 )
$2,002.99
—
$2,407.99
Crower Standard Series Crankshafts
Crankshafts are the most critical part of your engine's performance. Crower Standard Series crankshafts help to provide the best possible performance for your application, matching your head and valvetrain components to perfection. Made of forged 4340 steel for superior performance, they are available with internal and external balance. These crankshafts have numerous designs to meet anyone's needs, whether it's a smooth, lower lift rate for higher rpm and more durability, needing less spring pressure and less valvetrain modification, or a higher lift rate for less rpm with more spring pressure and lighter valvetrain components, providing the explosive power typically needed in race applications. So, if you're looking for a high performance crankshaft and want nothing but the best, these Crower Standard Series crankshafts are your answer.
Not Yet Reviewed
$4,203.99
—
$4,767.99
