Selected Filters


Loading...

Availability


29 Results Found For "line"

Showing All Customizable Items, Including Not in Stock Items

Part Groups

Results 1 - 24 of 29

Nitrous Express Stage II Water/Methanol Injection Systems

You'd be crazy to throw water into a gas tank and expect to get anywhere—but power and torque can be increased if you inject it into the incoming air charge with Nitrous Express water/methanol injection systems. Cooling the air charge allows for increased timing and the resulting performance benefits. These versatile units have a wide-open throttle switch for naturally aspirated vehicles and an adjustable boost-activated switch for forced induction models. Nitrous Express systems inject a fixed amount of fluid when the WOT switch or boost is activated—and continues until the switch opens again. They reduce intake temperatures and the need for timing retard when used with nitrous. Stage II kits come complete with a high-output pump, 3 qt. reservoir, nozzle, boost activated progressive controller, switch, hardware, and detailed instructions. Water has always been used to cool down motors, but with Nitrous Express water/methanol injection systems … it'll be heating things up!

Not Yet Reviewed

$3,398.40

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.45 out of 5 stars ( 11 )

$2,343.99

—

$2,944.99

Vintage Air Gen-V SureFit Billet Deluxe Systems Complete Kits

Upgrade your classic car or truck with the comfort and performance of Vintage Air Gen-V SureFit Billet Deluxe Systems Complete Kits. Engineered as vehicle-specific climate control solutions, these premium kits combine powerful air conditioning, efficient heating, and dehumidified defrost capabilities into a compact, behind-the-dash design that preserves a clean factory-style appearance. Featuring Vintage Air's advanced Gen-V electronic climate-control technology, high-capacity aluminum heat exchangers, preformed refrigerant lines, billet-style controls, and application-specific mounting components, SureFit Billet Deluxe kits deliver modern comfort with a precise fit and streamlined installation. Complete systems typically include the evaporator assembly, condenser, drier, hoses, wiring, vents, control panel, and installation hardware, providing everything needed to bring reliable, OEM-quality climate control to your vehicle restoration, restomod, or classic cruiser.

Not Yet Reviewed

$2,633.99

On Sale

BendPak RJ9W Rolling Lift Bridge Jacks

BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)

Not Yet Reviewed

$4,295.00


$3,955.00

Vintage Air Gen-V Magnum Max SureFit Systems Complete Kits

Vintage Air Gen-V Magnum Max SureFit Systems climate control complete kits offer powerful and technologically advanced control. They employ an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Each complete kit includes everything from the evaporator kit with Magnum Max blower, plus all under-hood components, such as the compressor and bracket, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and detailed installation instructions. Select the Vintage Air Gen-V Magnum Max SureFit complete kit designed for your vehicle. Features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength, and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * New electronic control panel included * Stamped firewall cover assembly * Quiet high performance blower

Not Yet Reviewed

$2,687.99

Vintage Air Gen-V SureFit Deluxe Systems Complete Kits

Upgrade your classic car or truck with the comfort and performance of Vintage Air Gen-V SureFit Deluxe Systems Complete Kits. Engineered specifically for a wide range of popular vintage vehicles, these complete climate-control packages deliver modern air conditioning, heating, and defrost functionality while maintaining a clean, factory-style appearance. Featuring a fully electronic microprocessor-controlled system, high-capacity heat and cooling coils, vehicle-specific mounting components, preformed refrigerant lines, and application-specific brackets, SureFit Deluxe kits are designed for straightforward installation with minimal vehicle modification. By concealing the evaporator behind the dash and utilizing factory-style controls whenever possible, these systems provide reliable cabin comfort without compromising the classic look of your ride.

Not Yet Reviewed

$2,633.99

Vintage Air Gen-V SureFit Max Systems Complete Kits

Vintage Air 5th generation SureFit climate control systems are the most powerful and technologically advanced systems available today. They employ an exclusive, fully electronic microprocessor-controlled system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Additional features include variable blower speed and dash/floor/defrost blend. Complete kits include everything in the evaporator kit plus, all underhood components such as compressor, engine brackets, condenser with brackets, pre-formed refrigerant lines, drier, fittings, hardware and installation instructions. Additional details: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Powdercoated steel mounting brackets * Quiet high-performance blower * Includes new bolt-in, LED backlit control panel * Stamped steel firewall cover panel * Steel firewall water drip tray * Replacement steel glove box (reduced capacity)

Not Yet Reviewed

$2,796.99

Forgeline Drag Racing Series GS1R Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed their experience and capability toward the drag racing industry and developed the all-forged GS1R Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's GS1R Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The GS1R Beadlock wheel is very similar to Forgeline's track-proven GS1R road racing wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. Forgeline's new one-piece forged Monoblock GS1R Beadlock wheel is available to order in 15-inch, 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. Upon special request, it can be engineered to work with shank-style lug nuts. And just like any Forgeline wheel, the GS1R Beadlock is available with fully customizable finish options. Note: This wheel requires special machining to fit Forgeline's optional Open Lug Center Caps. If you wish to use an optional Open Lug Center Cap, then you must specify when placing your order! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Forgeline Drag Racing Series CF1 Custom-Order Beadlock Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed their experience and capability toward the drag racing industry and developed the all-forged CF1 Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's Drag Racing Series CF1 Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to their beadlock wheels for straight line racing applications. Similar to Forgeline's track-proven CF1 Open Lug road racing wheel model, the Drag Racing CF1 Beadlock has been re-engineered with one big exception—to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. The CF1 Beadlock also forgoes the CF1 Open Lug's aggressive open-lug hub center area for a more traditional hub center design that accommodates our standard press-in aluminum center cap. The CF1's one-piece Monoblock design, with no welding or assembly bolts, is machined to close tolerances to be smooth and vibration-free. They offer exceptional deflection and structural stiffness, as well as generous brake clearance. Forgeline's new one-piece forged Monoblock CF1 Beadlock wheel can be custom made-to-order in 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. Upon request, it can be engineered to work with shank-style lug nuts. And just like any Forgeline wheel, the CF1 Beadlock is available with fully customizable finish options to allow you to mix or match ring and wheel colors! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Billet Specialties Profile Collection Series Rail Extreme Polished Custom Order Wheels

Want to make a statement? Billet Specialties Profile Collection Series wheels are designed, forged, and finished for the discriminating enthusiast. Produced from millions of lines of machining code executed on state-of-the-art CNC machines, each wheel blends multiple surfaces together to create dramatic features. Billet Specialties' Rail extreme polished custom order wheels from their Profile Collection Series are hand-buffed to an amazingly brilliant finish--even the point where the center meets the rim is nearly invisible. The extreme profile provides a 1/2 in. caliper clearance, and the depth of each dished spoke is so pronounced they draw the eyes of onlookers instantly. Profile Collection Rail extreme wheels will garner all the attention you desire! NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,373.00

—

$2,799.00

Forgeline Drag Racing Series NW105 Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed their experience and capability toward the drag racing industry and developed the all-forged NW105 Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's forged monoblock single beadlock Drag Racing Series NW105 Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The NW105 Beadlock wheel is very similar to Forgeline's NW105 forged monoblock wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. Designed for modern exotic supercars with center-locking hubs, the Forgeline forged monoblock NW105 Beadlock features a split 7-spoke design with tapered angular spokes and pronounced chamfered edges that creates a high-tech appearance on par with its advanced engineering technology and standard-setting performance capability. It is available to order in 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. And just like any Forgeline wheel, the NW105 Beadlock is available with fully customizable finish options. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Billet Specialties Profile Collection Series Flare Extreme Polished Custom Order Wheels

Want to make a statement? Billet Specialties Profile Collection Series wheels are designed, forged, and finished for the discriminating enthusiast. Produced from millions of lines of machining code executed on state-of-the-art CNC machines, each wheel blends multiple surfaces together to create dramatic features. Billet Specialties' Flare Extreme polished custom order wheels from their Profile Collection Series are hand-buffed to an amazingly brilliant finish--even the point where the center meets the rim is nearly invisible. The Extreme profile provides a 1/2 in. caliper clearance, and the depth of each dished spoke is so pronounced they draw the eyes of onlookers instantly. Profile Collection Flare extreme wheels will garner all the attention you've been wanting! NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,260.00

—

$2,665.00

Forgeline Drag Racing Series CF1R Custom-Order Beadlock Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed their experience and capability toward the drag racing industry and developed the all-forged CF1R Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's Drag Racing Series CF1R Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to their beadlock wheels for straight line racing applications. The CF1R Beadlock wheel is very similar to their track-proven CF1 Open Lug road racing wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. The CF1R's one-piece Monoblock design, with no welding or assembly bolts, is machined to close tolerances to be smooth and vibration-free. They offer exceptional deflection and structural stiffness, as well as generous brake clearance. Forgeline's new one-piece forged Monoblock CF1R Beadlock wheel can be custom made-to-order in 15-inch, 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. Upon request, it can be engineered to work with shank-style lug nuts. And just like any Forgeline wheel, the CF1R Beadlock is available with fully customizable finish options to allow you to mix or match ring and wheel colors! Note: This wheel requires special machining to fit Forgeline's optional Open Lug Center Caps. If you wish to use an optional Open Lug Center Cap, then you must specify when placing your order! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Forgeline Drag Racing Series SC1R Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed our experience and capability toward the drag racing industry and developed the all-forged SC1R Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's Drag Racing Series SC1R Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The Drag Racing Series SC1R Beadlock wheel is very similar to Forgeline's SC1 forged monoblock wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. Forgeline's SC1R Beadlock wheel is available to order in 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. Upon request, it can be engineered to work with shank-style lug nuts. And just like any Forgeline wheel, the Drag Racing Series SC1R Beadlock is available with fully customizable finish options. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Forgeline Drag Racing Series VX1R Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed our experience and capability toward the drag racing industry and developed the all-forged VX1R Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's forged monoblock single beadlock VX1R Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The VX1R Beadlock wheel is very similar to Forgeline's track-proven VX1R road racing wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. Forgeline's VX1R Beadlock wheel is available to order in 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. Upon request, it can be engineered to work with shank-style lug nuts. And just like any Forgeline wheel, the Drag Racing Series VX1R Beadlock is available with fully customizable finish options. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Forgeline Drag Racing Series GS1 Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed their experience and capability toward the drag racing industry and developed the all-forged GS1 Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's Drag Racing Series GS1 Beadlock carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The GS1 Beadlock wheel is very similar to Forgeline's track-proven GS1R road racing wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. The GS1 Beadlock also forgoes the GS1R's aggressive open-lug hub center area for a more traditional hub center design that accommodates our standard press-in aluminum center cap. Like all Forgeline wheels, the one-piece forged monoblock GS1 Beadlock is custom made-to-order for each individual customer and each unique vehicle application, and is offered in 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. Upon request, it can be engineered to work with shank-style lug nuts. And just like any Forgeline wheel, the GS1 Beadlock is available with fully customizable finish options. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Forgeline Drag Racing Series SS1R Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed our experience and capability toward the drag racing industry and developed the all-forged SS1R Beadlock wheel. Unlike most traditional drag racing wheels, Forgeline's Drag Racing Series SS1R Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The SS1R Beadlock wheel is very similar to Forgeline's track-proven SS1R road racing wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. Forgeline's SS1R Beadlock wheel is available to order in 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. Upon request, it can be engineered to work with shank-style lug nuts. And just like any Forgeline wheel, the Drag Racing Series SS1R Beadlock is available with fully customizable finish options. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Billet Specialties Profile Collection Series Rat Tail Extreme Polished Custom Order Wheels

Want to make a statement? Billet Specialties Profile Collection Series wheels are designed, forged, and finished for the discriminating enthusiast. Produced from millions of lines of machining code executed on state-of-the-art CNC machines, each wheel blends multiple surfaces together to create dramatic features. Billet Specialties' Rat Tail extreme polished custom order wheels from their Profile Collection Series are hand-buffed to an amazingly brilliant finish--even the point where the center meets the rim is nearly invisible. The extreme profile provides a 1/2 in. caliper clearance, and the depth of each dished spoke is so pronounced they draw the eyes of onlookers instantly. Profile Collection Rat Tail extreme wheels will garner all the attention you desire! NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,373.00

—

$2,799.00

Billet Specialties Profile Collection Series Pinnacle Extreme Polished Custom Order Wheels

Want to make a statement? Billet Specialties Profile Collection Series wheels are designed, forged, and finished for the discriminating enthusiast. Produced from millions of lines of machining code executed on state-of-the-art CNC machines, each wheel blends multiple surfaces together to create dramatic features. Billet Specialties' Pinnacle Extreme polished custom order wheels from their Profile Collection Series are hand-buffed to an amazingly brilliant finish--even the point where the center meets the rim is nearly invisible. The Extreme profile provides a 1/2 in. caliper clearance, and the depth of each dished spoke is so pronounced they draw the eyes of onlookers instantly. Profile Collection Pinnacle extreme wheels will garner all the attention you desire! NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,373.00

—

$2,799.00

Billet Specialties Profile Collection Series Stiletto Extreme Polished Custom Order Wheels

Want to make a statement? Billet Specialties Profile Collection Series wheels are designed, forged, and finished for the discriminating enthusiast. Produced from millions of lines of machining code executed on state-of-the-art CNC machines, each wheel blends multiple surfaces together to create dramatic features. Billet Specialties' Stiletto extreme polished custom order wheels from their Profile Collection Series are hand-buffed to an amazingly brilliant finish--even the point where the center meets the rim is nearly invisible. The extreme profile provides a 1/2 in. caliper clearance, and the depth of each dished spoke is so pronounced they draw the eyes of onlookers instantly. Profile Collection Stiletto extreme wheels will garner all the attention you desire! NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,373.00

—

$2,799.00

Forgeline Drag Racing Series GS1R-6 Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed their experience and capability toward the drag racing industry and developed the all-forged Drag Racing Series GS1R-6 wheel—a unique single beadlock wheel that is designed specifically for vehicle applications with 6-lug hubs, including the Dodge Viper. Unlike most traditional drag racing wheels, Forgeline's GS1R-6 is a forged monoblock single beadlock wheel that is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The GS1R-6 Beadlock wheel is very similar to Forgeline's track-proven GS1R road racing wheel with one big exception: It has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of 21 standard lightweight titanium bolts. Like all Forgeline wheels, the one-piece forged monoblock GS1R Beadlock is a custom made-to-order wheel offered 17-inch, 18-inch, and 19-inch diameters in a range of widths and custom offsets and fitments. And just like any Forgeline wheel, the GS1R Beadlock is available with fully customizable finish options. Note: This wheel requires special machining to fit our optional Open Lug Center Caps. If you wish to use an optional Open Lug Center Cap, then you must specify when placing your order! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,095.00

—

$2,675.00

Forgeline Drag Racing Series NW105 5-Lug Beadlock Custom-Order Wheels

After more than 25 years of producing the most highly regarded and technically advanced wheels for professional road racing applications, Forgeline has directed their experience and capability toward the drag racing industry and developed the all-forged NW105 5-Lug Beadlock Custom-Order Wheels. Made-to-order and custom built to tailor fit your vehicle, these wheels do require additional time for production/shipping. Unlike most traditional drag racing wheels, Forgeline's forged monoblock NW105 Beadlock wheel is carved entirely in one-piece from a single forging of 6061-T6 aluminum using an advanced precision machining process. This forged monoblock technology has proven successful, for many years, at the highest levels of road racing, and Forgeline is excited to apply it to beadlock wheels for straight line racing applications. The NW105 Beadlock wheel is very similar to Forgeline's NW105 forged monoblock wheel with one big exception: it has been re-engineered to include a special bolt-on outboard beadlock ring that, like the wheel itself, is also precision-machined from forged 6061-T6 aluminum. This forged aluminum ring holds the tire securely in place, to limit unwanted tire slip against the wheel, and to keep the tire from unseating, at very high speeds. The forged beadlock ring is secured to the wheel with a series of standard lightweight titanium bolts. Designed for modern exotic supercars with center-locking hubs, the Forgeline forged monoblock NW105 Beadlock features a split 7-spoke design with tapered angular spokes and pronounced chamfered edges that creates a high-tech appearance on par with its advanced engineering technology and standard-setting performance capability. It is available to order in 17 in., 18 in., and 19 in. diameters in a range of widths and custom offsets and fitments. And like any Forgeline wheel, the NW105 Beadlock is offered with fully customizable finish options. Product Details: * Custom Made-to-Order wheel for each individual customer and each unique vehicle application * One-piece monoblock design with no welding or assembly bolts * Forged 6061-T6 aluminum * Machined to close tolerances to be smooth and vibration-free * Exceptional deflection and structural stiffness * Generous brake clearance * Engineered for center-locking Mononut hubs * Custom finish options (you can mix and match ring and wheel colors)

Not Yet Reviewed

$2,095.00

—

$2,675.00

Strange Ford 9 in. HD Pro Aluminum Custom Order Assemblies

Strange Engineering has developed the iconic Ford 9 in. rear axle into an extensive line of parts and complete HD Pro aluminum custom order assemblies that take advantage of the strengths of the original, while improving on strength, performance, and flexibility. These axles consist of forged aluminum pinion supports, with a lightweight steel spool or clutch posi unit and your choice of gear ratio in a standard gear, fully assembled with yoke. The most popular rear-end around is the Ford 9 inch unit; it is used by restorers, street rodders, and racers alike, regardless of what brand of car they're restoring.

5.0 out of 5 stars ( 2 )

$2,021.99

Hughes Performance Pro-IV Series Torque Converters

Hughes Performance Pro-IV Series race converters are available from an entirely new casing and are built differently than our other full race torque converters. These units are more aggressive, delivering a hard hit off the line and soft transition down track with no loss in top-end efficiency and mph. They run faster than any other 9 in. that Hughes has ever produced, give you consistency at 60 ft. that you won't believe, and still let you kill the tree. They also offer you a great reaction time, a more aggressive stator, and a less aggressive fin angle.

Not Yet Reviewed

$2,386.99