Free Shipping on Orders Over $125 at Summit Racing

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.63 out of 5 stars ( 8 )

$2,276.99

—

$2,662.99

QuickJack 6000ELX Car Lifts

There's a lot you can do with an extra 3 in.--QuickJack 6000ELX car lifts are designed to raise 3 in. taller than previous models and of course, they provide the same portability, safety, and convenience in your garage that QuickJack is known for. They also provide an extended lift point spread (53 to 76 in.) and longer frame length (86.75 in.). Features: * 6,000 lb. capacity * Lifts higher without sacrificing QuickJack's patented super-low profile when fully lowered * Built with 14-gauge steel * Open center design * Automatic safety locks * Integrated ultra-durable urethane rubber wheels that allow you to roll them into position * Easy to store

5.0 out of 5 stars ( 1 )

$2,324.99

iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches

iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$3,770.00

iDEAL Equipment Electric/Hydraulic UTV Lift Benches

Designed to fit the largest UTVs, iDEAL Equipment electric/hydraulic UTV lift benches feature a 2,200 lbs. capacity, along with a 65 in. x 88.6 in. platform. Featuring newly designed drive on pivot ramps that fold down and out of the way to become wheel stops. While an innovative retractable center ramp slides out of the way making for a safe, unobstructed workspace. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV lift benches UTV side extensions incorporate innovative center drop panels providing unmatched service access, including motorcycle service, without removing the extensions. A single point hand-held pendant controls raising or lowering the bench, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 65 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,920.00

iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches

Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,070.00

Ranger RP-20FC Oil Filter Crush Presses

Ranger RP-20FC oil filter crush presses can apply 10 tons of pure, air-operated pressure to just about any used oil filter or can--easily reducing it to 25 percent of its original size and removing 95 percent of the oil. An integrated collection chamber and collector downspout makes oil recovery a cinch. At the drastically reduced size, cans and oil filters are much cheaper to dispose of, so these presses are great for the environment and your bank account. They're perfect for crushing light-duty truck and automotive filters; even the popular 8 in. tall filters for Cummins and Powerstroke diesel-powered vehicles fold beneath the massive weight of these presses.

Not Yet Reviewed

$2,475.00

Eddie Motorsports V-Drive V-Belt Pulley Drive Systems

Tough, shiny, beautiful, and powerful are all words that come to mind when looking into Eddie Motorsports V-Drive V-belt pulley drive systems. These multiple-component systems are constructed from billet aluminum for optimum strength, corrosion resistance, and longevity. They include an aluminum water pump, Powermaster 170 amp alternator, Gates V-belts, and all necessary stainless steel hardware. GM Type II power steering pumps and Sanden-style SD7 A/C compressors are used on units with power steering or air conditioning. Polished or clearcoated systems use polished finished components. Choose the options and fitment for your specific application—then enjoy the incredible performance, exceptional style, and tough construction of Eddie Motorsports V-Drive V-belt pulley drive systems.

4.5 out of 5 stars ( 2 )

$2,008.95

On Sale

UniSteer Rack and Pinion Conversion Kits

From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.

3.8 out of 5 stars ( 10 )

$2,683.99

$2,415.59

iDEAL Equipment Electric/Hydraulic ATV Lift Benches

iDEAL Equipment electric/hydraulic ATV lift benches are up to the challenge of lifting all ATVs on the market today. Featuring a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises and become wheels stops. Keeping the safety of the technician in mind, a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. Long x 50 in. wide * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,410.00

Flaming River Programmable Keyless Ignition Column Systems

These Flaming River programmable keyless ignition systems offer more than push button starts. They have expanded their keyless ignition systems to include programmable units using RFID proximity technology. These Flaming River systems have been integrated into their awesome tilt columns in your choice of beautifully polished stainless steel, durable black powdercoat, or in a paintable mill finish to complement your custom interior. They allow you to use your already existing keyless entry/trunk release system, door poppers, or other popular remotely controlled accessories. They also have the ability to learn and recognize additional key fobs or replacement fobs, and feature an emergency bypass mode as well as a security lockout. Rev up your hot rod or classic with a new generation of Flaming River "cool"! Programmable keyless ignition systems include: * Ignition Control Module (ICM) * Two power harnesses * Accessory harness * Emergency bypass PIN card * Start button * Motion-activated RFID device * Floor shift or column shift tilt steering column

Not Yet Reviewed

$2,046.99

iDEAL Equipment Air/Hydraulic Motorcycle Lift Benches

iDEAL Equipment air/hydraulic motorcycle lift benches are ideal for making repairs to motorcycles, snowmobiles, ATVs, and other power sports machines. These lift benches feature an extra-large platform, 38 in. working height, and come available with a wide range of accessories allowing you to customize them to suit your shop needs. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 1,500 lbs. * Minimum height of 6.750 in. * Overall length, with ramp is 109.5 in. * Overall width is 50 in. * Platform size is 88.5 in. long x 50 in. wide * Side extension and vise come standard * Build in drop-out panels

Not Yet Reviewed

$2,619.99

—

$2,624.99

AJE Suspension Mustang Tubular K-Member Complete Swap Kits

Are you swapping in a new engine to your Mustang? If so, AJE Suspension Tubular Mustang K-member swap kits should be your choice to drop the engine you want under the hood of your pony. These swap kits are produced exclusively by AJE Suspension with bolt-in K-members that fit your Mustang and the necessary motor mounts to mount any engine--Chevy or Ford! First, AJE motor mounts are stronger than factory setups, so they can handle the power of your turbos and blowers. Second, their K-members are crafted from steel. They offer no bent tubes and triangulated load paths to deliver the strength that you need without adding extra weight that you don't need, as well as extra header/oil pan clearance! The swap kits also include A-arms, coil-over spring kits, and, depending on the application, caster/camber plates. One last thought--if you decide to part with your pony and keep your engine, you'll have plenty of interested parties, as the new buyer can mount any engine they choose without changing the K-member. Why waste money on K-members that mount only one family of engines? Compare price, quality, and design--you'll be ready to update your pony with the suspension technology of AJE Suspension tubular K-member complete Mustang swap kits.

3.23 out of 5 stars ( 13 )

$3,004.99

—

$3,006.99

GSI Machine and Fabrication Air Ride Bolt-On Front Suspension Kits

GSI Machine and Fabrication offers Air Ride bolt-on front suspension kits for a variety of applications—including many 1960s and '70s era Chevrolet trucks. These 100 percent bolt-in front crossmember kits include all the necessary components to replace your old worn-out suspension with new, modern air ride. Custom-designed tie rod adapters require no modification to the spindle; while narrowed track width facilitates driving and turning low. Wheel position has been moved forward 1 in. to center the wheel in the wheel opening; and upgraded steering powers rack and pinion. Kits are designed to use "clamshell" style motor mounts with a GM 350 engine; LS, LT, and big block engines are compatible with the use of GSI motor mount adapters (available separately). Everything has been carefully planned and designed to obtain the best drivability and easiest installation possible. Notes: * When installing an LS-based engine, the use of an F-body style oil pan is required * The rack and pinion unit is a late '80s Mustang-style with a 3/4-36 spline * Removal of inner fender well is required * Power steering hoses and fittings can be found at most speed shops or online retailers * Recommended wheel specs: 8.5 in. wide with 5.5 in. backspace or 9 in. wide with 6.0 in. backspace * Misc steering parts such as U-joints and shafts are not included * Designed around 71/72 C10 spindles, making this front end compatible with several brake kits Key features: * Re-engineered suspension and steering geometry * Raised crossmember for increased ground clearance * 61 in. track width * 8.5 in. adjustable suspension lift * Built-in limit stops * Updated steering to power rack and pinion unit * Easy alignment with eccentric cams at all four lower control arm pivots * Designed to lay frame when using up to a 30 in. tall tire

Not Yet Reviewed

$4,499.99

Vintage Air Gen-V SureFit Max Systems Complete Kits

Vintage Air 5th generation SureFit climate control systems are the most powerful and technologically advanced systems available today. They employ an exclusive, fully electronic microprocessor-controlled system that eliminates cables or vacuum connections. Separate, state-of-the-art, high-density aluminum heat exchangers pack the maximum possible performance and reliability within the confines of your dash. Additional features include variable blower speed and dash/floor/defrost blend. Complete kits include everything in the evaporator kit plus, all underhood components such as compressor, engine brackets, condenser with brackets, pre-formed refrigerant lines, drier, fittings, hardware and installation instructions. Additional details: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection molded case for optimal precision, strength and quality * Injection molded blend air doors with integral rubber seals * Removable access covers for coil service * Powdercoated steel mounting brackets * Quiet high-performance blower * Includes new bolt-in, LED backlit control panel * Stamped steel firewall cover panel * Steel firewall water drip tray * Replacement steel glove box (reduced capacity)

Not Yet Reviewed

$2,715.99

McGaughy's Traction Bars

Riding on the reputation of their parts being bolt-on installations, they make sure that McGaughy's traction bars work hand-in-hand with necessary factory suspension components. McGaughy's suspension engineering capabilities are endless, and they continue to release the high-quality suspension parts that the public demands.

4.0 out of 5 stars ( 21 )

$2,255.87

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$4,995.00

Heidts Bolt-In 4-Link Kits

Heidts offers bolt-in 4-link kits for a variety of applications from the 1960s and '70s. Delivering maximum performance, the kits are complete bolt-ons, with no cutting or floor modifications required—and the adjustable 4-link mounts allow for suspension tuning. Each kit includes brackets, adjustable links, top crossmember, standard black coilover shocks, and hardware. Get an easier handle on performance with Heidts bolt-in 4-link kits.

4.0 out of 5 stars ( 2 )

$2,411.00

McGaughy's Premium Suspension Lift Kits

McGaughy's Premium suspension lift kits are a high-quality way to outfit your rig with a new attitude. Delivering your preferred 2 to 10 in. front and/or rear lift, these kits provide more than their basic package and include everything you need to achieve the proper stance. McGaughy's offers different options and components in their kits to provide the most complete suspension kit for your specific vehicle; and most of the parts are finished with a durable black or silver powdercoat. Elevate your truck; order the suspension lift kit recommended for your application.

2.0 out of 5 stars ( 1 )

$3,998.61

BendPak RJ9W Rolling Lift Bridge Jacks

BendPak's RJ9W is a rolling bridge jack with 9,000-lb. capacity which is ideal for use on the BendPak HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity—which is generally associated with heavier trucks and SUVs. The RJ9W rolling bridge comes standard with easy-roll wheels that fit inside the runway channels on standard four-post lift models and provide effortless gliding along the runways for easy positioning and adjustability. The BendPak rolling bridge jack rollers are made of hardened stainless-steel and zinc plated for maximum durability. Rubber contact pads are essential lifting components and increase rise and firmly engage your vehicle's undercarriage lift points—durable, non-marring surface ensures vehicle is not scraped or damaged during rolling bridge jack or car lift operation. Additional product features and specs: * Stackable adapters—give you the ability to stack and unstack BendPak contact pads that increases the versatility of your rolling bridge jack and are also useful for lifting vehicles that may have drastically different front-and-rear suspensions (with two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift) * BendPak's rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack—the car lift runs off its own power unit, so there's no "sharing" of hydraulic power between the two (an airline must be attached to the rolling bridge jack with 125 psi and 10–20 cfm) an easy foot pedal control is included for safety and convenience * Three lock levels—with three lock positions, your rolling bridge jack can be raised to the level most comfortable for you so you can find the perfect height for the perfect job as you also adjust the height of your car lift * Optional air-line kit available (sold separately)

Not Yet Reviewed

$4,295.00

American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits

American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness

5.0 out of 5 stars ( 1 )

$4,395.00

—

$4,485.95

BendPak RJ7W Rolling Lift Bridge Jacks

BendPak RJ7W rolling lift bridge jacks are made for an HDS-14 Series four-post lift, so you can turn your 4-post car lift into an on-the-car wheel service dynamo! The scissor-style jacks offer peerless speed and versatility, making automotive service such as brake jobs and suspension work a cinch. The RJ7W rolling lift bridge jacks features an exclusive telescoping design to accommodate the BendPak HDS-14 Series 4-post lift with adjustable-width runways, precision sliders, and rollers, enabling you to position the hydraulic jacks exactly where you need them. Additional product features: * 7,000-lb. lifting capacity * Easy-roll wheels * Three safety-lock positions * Stackable adapters to provide added clearance when needed * Rubber contact pads * High-pressure hydraulic power unit * Optional airline kit available

Not Yet Reviewed

$2,495.00

Transmission Specialties Powerglide Performance Racing Transmissions

For over 40 years Transmission Specialties has been the trusted name in the performance automatic transmission industry. TSI has pioneered much of the technology that is now commonplace in the transmission marketplace. The inventors of the spragless converter and the aftermarket helical Powerglide planetary, TSI is known worldwide for manufacturing and assembling the highest quality transmissions and components. Unlike many production builders, TSI transmissions are handcrafted from beginning to end by one highly skilled and experienced technician. This process ensures that you get the highest quality product every time. Transmission Specialties Powerglide performance racing transmissions can be chosen in power outputs ranging from 1,100 to 2,500 hp, with short or long Powerglide output shaft, and the 3000, 5000, and 5500 Series transmissions come with an SFI-approved case. Get a transmission you can trust to put the power to the ground—Transmission Specialties Powerglide performance racing transmissions.

Not Yet Reviewed

$2,982.00

BendPak RJ45W Rolling Lift Bridge Jacks

BendPak RJ45W rolling bridge jacks are compatible with BendPak HD-7 Series, HD-9 Series and GP-9 Series four-post lifts, so you can turn your 4-post car lift into an on-the-car wheel service dynamo! The scissor-style jacks offer peerless speed and versatility, making automotive service such as brake jobs and suspension work a cinch. The BendPak RJ45W lift bridge jacks exclusive telescoping design accommodates BendPak 4-post lifts with adjustable-width runways, precision sliders, and rollers to enable you to position the hydraulic jacks exactly where you need them. Additional products features: * 4,500 lb. lifting capacity * Easy-roll wheels * Rubber contact pads * Stackable adapters to provide added clearance when needed * High-pressure hydraulic power unit

5.0 out of 5 stars ( 1 )

$2,350.00

Hughes Performance Street and Strip Transmissions

Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.

3.87 out of 5 stars ( 30 )

$3,130.99

—

$3,872.99

30 Results Found For "BLACK"