Free Shipping on Orders Over $125 at Summit Racing

QuickJack 6000ELX Car Lifts

There's a lot you can do with an extra 3 in.--QuickJack 6000ELX car lifts are designed to raise 3 in. taller than previous models and of course, they provide the same portability, safety, and convenience in your garage that QuickJack is known for. They also provide an extended lift point spread (53 to 76 in.) and longer frame length (86.75 in.). Features: * 6,000 lb. capacity * Lifts higher without sacrificing QuickJack's patented super-low profile when fully lowered * Built with 14-gauge steel * Open center design * Automatic safety locks * Integrated ultra-durable urethane rubber wheels that allow you to roll them into position * Easy to store

5.0 out of 5 stars ( 1 )

$2,324.99

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$4,995.00

Zumbrota Remanufactured Manual Transmissions

Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.71 out of 5 stars ( 21 )

$2,001.99

—

$4,914.99

Ranger DST2420 Wheel Balancers

Ranger DST2420 wheel balancers are highly accurate and dependable, featuring proprietary digital sensor technology for critical reliability and repeatability. They're built with a gritty toughness that guarantees perfectly balanced wheels day after day, around the clock. Like all of the DST Series wheel balancers, these units feature a proven direct-axis drive system--accurate to within hundredths of an ounce, ensuring that your wheels are balanced and vibration-free. The Ranger DST2420 balancers automatically calculate the exact weight needed to achieve optimal balance for almost every tire and wheel configuration on the planet; and brightly displayed LEDs mark the exact amount and location in just six seconds. A full menu of time-saving features--including dynamic, static, and performance alloy settings--allows you to balance OEM wheel configurations and performance wheels with minimal effort and speed.

5.0 out of 5 stars ( 1 )

$3,295.00

RAM Truck Pulling Custom Order Clutch Kits

RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.

3.0 out of 5 stars ( 2 )

$2,299.99

Zumbrota Remanufactured Transfer Cases

Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty

3.86 out of 5 stars ( 7 )

$2,001.99

—

$3,852.89

Hughes Performance Muscle Car Transmission Packages

Hughes Performance Muscle car transmission packages are designed and built to give customers the option to choose the transmission and converter package best suited for their needs. The transmission packages come complete with everything you need—transmission, converter, transmission cooler, transmission fluid, and more. So, whether you have a radical cam in your hot rod, or need to haul or tow a heavy load, Hughes Performance offers high-quality transmission packages to match your application needs. Note: Contents of kits vary based on transmission type and your vehicle.

5.0 out of 5 stars ( 1 )

$4,134.99

Ranger R980XR Tire Changers

Ranger R980XR tire changers are space-savers that perform basic tire changes quickly and safely. They install flush against the wall, so it stays out of the way, and the included non-marring duck heads are perfect for a wide variety of wheels. Designed to perform and built to last, R980XR tire changers are equipped with powerful motors and gearboxes to work systematically at a controlled speed for easy tire removal and installation. The ergonomic controls are sensibly placed to minimize excessive reaching, walking, or bending, and large storage trays provide ample space for accessories. Features: * Inflation gauge with integrated air dump valve * Inflation pressure regulator/limiter * Brush * Alloy steel mount/demount head * Plastic polymer mount/demount head * Oiler/lubricator * Air regulator * Breaker bar * Large soap/lubricator bucket

Not Yet Reviewed

$4,795.00

On Sale

UniSteer Rack and Pinion Conversion Kits

From the people who doing steering right--UniSteer rack and pinion kits deliver the feel and performance of precision. Their conversion kits are well-engineered and built to match the factory suspension, so installation is easy and performance is assured. UniSteer bolt-on rack and pinions are offered in both manual and power kits to fit your application needs. When you want to improve handling, reduce effort, and enhance responsiveness of your driving experience in your classic ride, turn to the experts at UniSteer for a rack and pinion conversion kit. UniSteer stands behind their products with a 2-year, Unlimited Mile Warranty.

3.8 out of 5 stars ( 10 )

$2,683.99

$2,415.59

Moser Engineering M9 Fabricated 9 in. Housing and Axle Packages

Engineered to race tolerances, these Moser M9 fabricated 9 in. housing and axle packages allow you to build your axle package with various custom selections and specifically for your application. They are built race-tough with seamless steel tubing, new brackets, new housing ends, new bushings, custom alloy axles, studs, and heavy-duty retainer plates. The Moser housings are made from 1/8 in. laser-cut mild steel and are combined with a 3/8 in. face plate. They come standard with internal gussets and bulk heads, able to take on a tough day at the track. These M9s also have custom-machined fill and drain bungs for easy maintenance. See the linked custom selection sheet to design and create your next M9 fabricated 9 in. housing and axle package.

Not Yet Reviewed

$2,547.00

RJays Frames

RJays Speed Shop offers complete perimeter frames for a variety of Ford cars and trucks from the 1920s, '30s, and '40s. The stamped steel frame rails are available with different options, like tubular center section, adjustable trans mount, crossmembers, suspension brackets, and more. These vintage chassis parts will assist in your restoration projects. Order the frame built for your vehicle.

Not Yet Reviewed

$2,989.99

—

$4,599.99

Forgeline One-Piece Monoblock Series FF1 Custom-Order Wheels

Some of the world's finest custom lightweight forged aluminum wheels are right here—and we get them from Forgeline Motorsports! Forgeline's one-piece Monoblock Series FF1 custom-order wheels are machined entirely from a single 6061-T6 aluminum forging to create a wheel that is extremely stiff, exceptionally strong, and very lightweight—all rolled into one attractive package! Forgeline's handsome FF1 is a fully-forged one-piece monoblock wheel that is built utilizing manufacturing technology similar to their very successful GA1R wheel. The concave 5-spoke design of the FF1 looks great and allows plenty of room for caliper clearance and extreme brake fitment, while the one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is ruggedly handsome, extremely stiff, and has excellent fatigue strength. Custom made-to-order for each customer and each unique vehicle application, Forgeline can build the FF1 wheel in 18-inch, 19-inch, 20-inch, and 21-inch diameters with a range of widths and offsets. Depending on size, the FF1 may be available in deep, medium, or shallow concave profiles. And just like any Forgeline wheel, the FF1 is available with fully customizable finish options. The FF1 is also available for limited applications in deep cap (DC) and extra-deep cap (EDC) profiles. These deep cap profiles employ unique in-house lathe turnings that allow Forgeline to position the center cap deep within the center of the wheel and create an exaggerated extra-aggressive concave look. This option is an excellent choice for select vehicles including the BMW M3, Nissan GT-R, ZL1 Camaro, C6 Z06 Corvette (rear only), and certain Porsche models (rear only). Forgeline is so serious about delivering satisfaction that all of their wheels are totally made-to-order. Each wheel's backspacing, diameter, fit, finish, and appearance are under your control. Competition drives excellence at Forgeline Motorsports; let them forge a set of wheels for you! Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,045.00

—

$2,495.00

Ranger DST30P Wheel Balancers

Ranger DST30P wheel balancers are efficient, extremely accurate, and are built with a narrower chassis—a perfect fit for smaller garages and shops. These hybrid designs feature a magnetic transducer encoder with twice as many teeth as Ranger's larger model, taking the count from 32 to 64. As a result, they double the number of possible weight placements, meaning more accuracy and better balancing in a space-conscious, cost-effective wheel balancer. Features include: * Direct-Axis drive system keeps balancer running smoothly over time * Digital Sensor Technology--16-digit digital sensor processor and single-chip technology for better speed and accuracy in your readings * Multi-directional quartz piezoelectric load sensors * 64-tooth encoder improves automatic weight optimization * Full-tilt LED display panel * Dynamic, static, and multiple alloy balancing modes are standard * Dual plane calibration for all OEM configurations and performance wheels * Top positioning weight locator * Inside and outside measuring * Millimeter/inches selection * Ounce/gram selection * Manual wheel offset distance setting * Self-calibration function * Auto start when hood is lowered * Wheel holding manual brake pedal * Truck cone/spacer ring adapter set * Wheel calipers * Rear cone mount spring * No-mar rear cone mount pressure cup * Quick-release and mount hub nut

Not Yet Reviewed

$3,595.00

Forgeline Truck and SUV Series FX1-BEADLÜK Custom-Order Wheels

Forgeline Truck and SUV Series wheels are engineered and custom built one-at-at-time from scratch for each individual customer and each unique vehicle application, including custom fitment and finish options. The custom made-to-order Forgeline FX1-BEADLÜK (pronounced "bead-look") is engineered for truck and SUV owners who want the look of a beadlock wheel but with the practicality and street-legality of a traditional shoulder-mounted wheel. Designed specifically for 6-lug truck and SUV applications, the FX1-BEADLÜK's combination of bolt-on rash guard ring and rugged machining details suggest serious off-road capability. The Forgeline FX1-BEADLÜK features a dramatic six spoke design with a customizable bolt-on rash guard ring, very strong multi-dimensional precision-machined tapered spokes, and aggressive machined relief pockets that surround the thick outer lip. The Forgeline FX1-BEADLÜK is a fully-forged one-piece monoblock wheel that utilizes manufacturing technology similar to Forgeline's legendary GA1R/GS1R racing wheels. Beyond just aggressive style, the one-piece monoblock forging and computer-simulated FEA design process yield a wheel that is relatively lightweight, stiff, and exceptionally strong. Machined from a single forging of 6061-T6 aluminum, the FX1-BEADLÜK is currently available in 18 in. diameters with a range of widths and offsets. And like any Forgeline wheel, the FX1-BEADLÜK is available with fully customizable finish options, including the ability to specify a contrasting color on the bolt-on BEADLÜK rash guard ring. Depending on size, this wheel may be available in deep, medium, or shallow concave profiles. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,195.00

—

$2,415.00

Billet Specialties Vintage Series Heritage Extreme Polished Custom Order Wheels

Wheels that have defined hot rodding through the years are mixed with new styles that look like they've always been there. Custom built to fit your hot rod, get your own piece of nostalgia in today's high-profile diameters. Billet Specialties Vintage Series Heritage Extreme profile polished custom order wheels are precision-machined with multi-axis technology and hand-finished. These retro-look rims are forged from 6061-T6 aluminum. They feature five spokes with peaks and channels; rounded trapezium windows; and a center hub designed for exposed lugs. Heritage wheels are available in multiple sizes and finishes for both the front and rear of your vehicle. Bolt on a set of vintage gems for style, strength, and performance! NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. IMPORTANT: All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,445.00

—

$2,883.00

Billet Specialties Vintage Series Bonneville Polished Custom Order Wheels

Wheels that have defined hot rodding through the years are mixed with new styles that look like they've always been there. Custom built to fit your hot rod, get your own piece of nostalgia in today's high-profile diameters. Billet Specialties Vintage Series Bonneville polished custom order wheels are precision-machined with multi-axis technology and hand-finished. These retro-look rims are forged from 6061-T6 aluminum. They feature five oblong windows, raised accents throughout, and a center hub designed for exposed lugs. Bonneville wheels are available in multiple sizes and finishes for both the front and rear of your vehicle. Bolt on a set of vintage gems for style, strength, and performance! NOTE: All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,002.00

—

$3,261.00

Billet Specialties Vintage Series Bonneville Extreme Polished Custom Order Wheels

Wheels that have defined hot rodding through the years are mixed with new styles that look like they've always been there. Custom built to fit your hot rod, get your own piece of nostalgia in today's high-profile diameters. Billet Specialties Vintage Series Bonneville Extreme profile polished custom order wheels are precision-machined with multi-axis technology and hand-finished. These retro-look rims are forged from 6061-T6 aluminum. They feature five oblong windows, raised accents throughout, and a center hub designed for exposed lugs. Bonneville wheels are available in multiple sizes and finishes for both the front and rear of your vehicle. Bolt on a set of vintage gems for style, strength, and performance! NOTE: All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,445.00

—

$2,883.00

Billet Specialties Vintage Series Monterey Extreme Polished Custom Order Wheels

History redefined by styling, Billet Specialties Vintage Series wheels take their cues from wheels that have defined hot rodding through the years and mixed them with updated features. Custom built to fit your vehicle, each wheel is precision machined with multi-axis technology and hand finished to an unrivaled polished finish. The Monterey extreme concave profile wheels feature forged 6061 T-6 aluminum centers with soft lip, covered lugs, a classic 7-window design, a beautiful shine, and several caliper clearance choices making them big brake ready. NOTE: All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels. NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel.

Not Yet Reviewed

$2,445.00

—

$2,883.00

Billet Specialties Vintage Series Palmdale Polished Custom Order Wheels

History redefined by styling, Billet Specialties Vintage Series wheels take their cues from wheels that have defined hot rodding through the years and mixed them with updated features. Custom built to fit your vehicle, each wheel is precision machined with multi-axis technology and hand finished to an unrivaled polished finish. The Palmdale standard profile wheels feature forged 6061 T-6 aluminum centers with soft lip, covered lugs, and a classic 5-window design. They are big brake ready with multiple caliper clearances available. Ready for a new spin on classic style? Billet Specialties Vintage Palmdale custom order wheels are great options. NOTE: All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,002.00

—

$2,256.00

Billet Specialties Vintage Series Palmdale Extreme Polished Custom Order Wheels

History redefined by styling, Billet Specialties Vintage Series wheels take their cues from wheels that have defined hot rodding through the years and mixed them with updated features. Custom built to fit your vehicle, each wheel is precision machined with multi-axis technology and hand finished to an unrivaled polished finish. The Palmdale extreme concave profile wheels feature forged 6061 T-6 aluminum centers with soft lip, covered lugs, and a classic 5-window design. They are big brake ready with multiple caliper clearances available. Ready for a new spin on classic style? Billet Specialties Vintage Palmdale custom order wheels are great options. NOTE: All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels. NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel.

Not Yet Reviewed

$2,445.00

—

$2,883.00

Billet Specialties SLC Series SLC42 Turbine Extreme Polished Custom Order Wheels

A cut above the rest, Billet Specialties SLC Series wheels feature styles that tastefully range from classic to aggressive modern. Each style is precision machined with intricate details that truly set these wheels apart from the ordinary straight-cut billet. Custom built just for you, Billet Specialties' SLC42 Turbine wheels with an extreme concave profile provide the ultimate staggered look, a 1/2 in. caliper clearance, and an attention to styling detail that screams excellence. Breathe some excitement into your ride with Billet Specialties SLC Series Turbine extreme profile polished custom order wheels. NOTE: Extreme profile wheels are not for every car. They work with vehicles that have narrowed rear ends that can run minimum backspace and lots of fender space for a wide wheel. All custom order wheels are Special Order and Non-Returnable. The price will vary depending on size and chosen options. You specify the size, bolt pattern, backspacing, and more. Even brake clearance and suspension upgrades are taken into account. Complete the above Instructions to collect the specs needed or call us for expert assistance. The wheels are shipped directly from the supplier so shipping times may vary. Mount and balance services are not available on custom wheels.

Not Yet Reviewed

$2,445.00

—

$2,883.00

Forgeline Truck and SUV Series CT3C Custom-Order Wheels

Forgeline Truck and SUV Series wheels are engineered and custom built one-at-at-time from scratch for each individual customer and each unique vehicle application, including custom fitment and finish options. The Forgeline Truck and SUV Series CT3C is a custom made-to-order wheel that is produced from forged 6061-T6 aluminum with heat-treated rim-shells. This is a three-piece wheel assembled with hidden stainless-steel ARP fasteners and Heli-Coil inserts. Designed specifically for truck and SUV applications, the Forgeline CT3C provides truck and SUV owners with a wheel option that is engineered to be strong, attractive, and can accommodate larger 6-lug fitments. The CT3C forged concave wheel features a muscular concave 6-spoke design with robust chamfered machining details around each spoke and a flat reverse-lip outer. And just like any Forgeline wheel, the CT3C is fully customizable in fitment and finish, including center lock applications. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,210.00

—

$2,290.00

Forgeline Heritage Series FL500 Custom-Order Wheels

Forgeline's Heritage Series wheels represent the best of their designs from over two decades of engineering and producing the finest custom-made-to-order forged aluminum wheels in retro-inspired designs that work well with virtually every class of automobile, from muscle cars to supercars to luxury vehicles. Each wheel is custom made-to-order one at a time for each individual customer and each unique vehicle application. The Forgeline FL500 Heritage Series wheel pays homage to the classic Magnum 500 wheel. But unlike its predecessor, the FL500 is a modern three-piece wheel built with true forged 6061-T6 aluminum centers, aircraft-quality ARP stainless steel hidden fasteners, and heat-treated rim sections. This Forgeline wheel style is available with a flat lip reverse outer in 18-inch, 19-inch, and 20-inch fitments, with a standard powdercoated and HTM (High Tech Machined) center finish combined with a polished outer rim. A traditional five-spoke design with inverted tapered spokes, the FL500 evokes a very traditional old-school muscle car character while delivering modern technology and performance. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,040.00

—

$2,370.00

Forgeline Truck and SUV Series FF3 Custom-Order Wheels

Forgeline Truck and SUV Series wheels are engineered and custom built one-at-at-time from scratch for each individual customer and each unique vehicle application, including custom fitment and finish options. The Forgeline Truck and SUV Series FF3 is a custom made-to-order three-piece wheel that is produced from forged 6061-T6 aluminum with heat-treated rim-shells. This three-piece wheel is assembled with hidden stainless-steel ARP fasteners and Heli-Coil inserts. Designed specifically for truck and SUV applications, the Forgeline FF3 provides truck and SUV owners with a wheel option that is engineered to be strong, attractive, and can accommodate larger 5-lug and 6-lug fitments. The FF3-Truck forged wheel features a muscular 5-spoke design with robust chamfered machining details around the rim register and a flat reverse-lip outer. And just like any Forgeline wheel, the Forgeline Truck and SUV Series FF3 is fully customizable in fitment and finish, including center lock applications. Customer must complete the Instruction sheet attachment for all wheel and related component information before a final price and availability can be provided. Finished price and availability will depend on the final configuration. Non-Returnable; each custom wheel is made-to-order. As mentioned, the price will vary depending on size selected and the chosen options. Achieve the look and fit you're after with the Forgeline custom wheel for your ride. All custom-order wheels are Special Order and Non-Returnable.

Not Yet Reviewed

$2,210.00

—

$2,290.00

95 Results Found For "built"