Free Shipping on Orders Over $109 at Summit Racing

Aeromotive Stealth Eliminator Street Fuel Systems

Aeromotive Stealth Eliminator Street Fuel systems are complete kits for EFI engines producing up to 1,400 flywheel hp forced induction or 1,900 flywheel hp naturally aspirated on gas. The systems provide fuel rails and Aeromotive's fuel pump speed controller for continuous duty street/strip applications. These serious Aeromotive kits also include all the necessary hard parts and feature their Stealth Eliminator fuel pump designed to fit inside the stock OEM tank and integrate with the stock fuel-level sending unit (and jet-siphon transfer pump). The systems are available for several different applications. Systems include: * Billet high-flow fuel rails * Billet EFI fuel pressure regulator * Stealth in-tank fuel pump assembly * Fuel pump speed controller—designed to keep fuel cool in cars that will see extended street driving but still need full pump performance for all out racing * Billet filter bracket * High-flow, 40-micron filter assembly * One-way check valve * High-flow ORB port fittings * One-piece CNC Y-block * Fuel-resistant nitrile O-rings

Not Yet Reviewed

$3,344.25

Nitrous Express Nitrous Plumbing Kits

Nitrous Express offers several nitrous plumbing kits highlighting their selection of precision nozzles. Available with Shark, Piranha, SSV, STD, or dry nozzles, these direct port NX kits contain all of the right components to get the performance flowing in your setup. The kits include stainless steel tubing, B-nuts, sleeves, distribution blocks or hex rails, fittings, lines, and jetting. They are available with or without solenoids. Plumb your setup with nitrous kits that offer more flow and more go from Nitrous Express.

5.0 out of 5 stars ( 1 )

$2,399.30

PSC Jeep JL/JT Cylinder Assist EHPS Steering Kits

PSC Jeep JL/JT Cylinder Assist EHPS (Electric-Hydraulic Power Steering) steering kits deliver improved handling characteristics without oversteer and a familiar level of road feel without increased driver effort for your Jeep Wrangler or Gladiator. Choose the preferred kit for your Jeep. Features: * Increased Torque Output * Relieves stress on steering gearbox and frame mounts * Steering Assist Cylinder acts as a dynamic steering stabilizer * Fully assembled hoses and fittings, ready to bolt-on for quicker, easier installation * All mounting brackets and hardware * EHPS boost kit for increased pump pressure * XDR steering gear featuring PSC's proprietary high-flow spool valve * High-capacity remote power steering fluid reservoir * Assist Cylinder kits--factory and aftermarket axles * Compatible with the factory pitman arm * Bolt-on heat sink fluid cooler kit * Tie rod clamp available in 1 1/4 in., 1 3/8 in., 1 1/2 in., 1 5/8 in., and 1 3/4 in. sizes

Not Yet Reviewed

$2,520.00

—

$3,848.00

PSC Hydraulic Assist Steering Systems

Oversize tires, lockers, and rocks will quickly have your stock steering system whining for help. Increase turning force by an average of 50 percent with PSC hydraulic assist steering systems. They feature a new hydraulic-assist steering cylinder with all required mounting brackets, hoses, and fittings. Their new steering gear boxes have been modified for cylinder assist. The valving remains stock to allow OEM handling, control, road feel, and no oversteer. PSC hydraulic assist steering systems turn taller tires like they're stock.

4.33 out of 5 stars ( 12 )

$2,565.00

—

$3,375.00

Aeromotive A1000 Camaro In-Tank Pump Fuel Systems

The Camaro Stealth Fuel System includes the Aeromotive Stealth A1000 fuel pump, designed to fit inside the stock, OEM Camaro tank and integrate with the stock fuel-level sending unit and jet-siphon transfer pump. This serious Aeromotive fuel system provides all the necessary fuel system hard-parts, including the Stealth in-tank fuel pump, 40-micron high-flow filter, one-piece CNC Y-block, billet high-flow fuel rails, billet EFI pressure regulator, and all necessary Aeromotive high-flow, ORB port fittings. Fuel pump electrical supply is also provided, including fuel pump speed controller, designed to keep fuel cool in cars that will see extended street driving but still need full pump performance for all-out racing. (Fuel lines and hose-ends sold separately. The purchase of a separate tach adapter may be required to operate the fuel pump speed controller.) Additional details: * Rated for EFI engines producing up to 1,000 flywheel horsepower forced induction or 1,300 flywheel horsepower naturally aspirated * For 2010-15 Camaros equipped with LS3 engine and/or equivalent intake * Includes Aeromotive's fuel pump speed controller for continuous duty street/strip applications * This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications * This kit contains the following parts: -- (1) Fuel rail -- (1) Fuel pressure regulator -- (1) Fuel pump assembly -- (1) Fuel pump speed controller -- (1) Filter bracket -- (1) Filter assembly, 40-micron -- (1) One-way check valve -- (6) ORB-08 to AN-08 fittings -- (4) ORB-10 to AN-08 fittings -- (1) ORB-06 to AN-08 fitting -- (1) Y-Block, AN-08 -- (1) AN-10 O-ring

Not Yet Reviewed

$3,100.75

Peterson Fluid Systems R4 Oil Pumps

Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section

4.5 out of 5 stars ( 2 )

$2,054.99

—

$2,569.99

PSC Jeep JL Big Bore XD Steering Cylinder Assist Kits

PSC has taken the Jeep JL steering system back to the drawing board and engineered their exclusive Jeep JL Big Bore XD steering cylinder assist kits. These kits are engineered to solve the original steering issues, and efficiently handle the increased torque loads on vehicles equipped with any combination of 37 in. or larger tire sizes, upgraded aftermarket axles, or differential lockers. Features and benefits of upgrade kit include: * Increased torque output * Relieves stress on steering gearbox and frame mounts * Steering assist cylinder acts as a dynamic steering stabilizer

Not Yet Reviewed

$3,590.00

—

$3,933.00

PSC Jeep JT Big Bore XD Steering Cylinder Assist Kits

PSC has taken the Jeep JT steering system back to the drawing board and engineered their exclusive Jeep JT Big Bore XD steering cylinder assist kits. These kits resolve the original steering issues, and efficiently handle the increased torque loads on vehicles equipped with 37 in. or larger tire sizes, upgraded aftermarket axles, differential lockers, or any combination thereof. Jeep JT Big Bore XD steering cylinder assist kits feature: * Increased torque output * Relieves stress on steering gearbox and frame mounts * Steering assist cylinder acts as a dynamic steering stabilizer

Not Yet Reviewed

$3,500.00

—

$3,933.00

PSC Jeep JK Big Bore XD Steering Cylinder Assist Kits

PSC has taken the Jeep JK steering system back to the drawing board and engineered their exclusive Jeep JK Big Bore XD steering cylinder assist kits. These kits resolve the original steering issues, and efficiently handle the increased torque loads on vehicles equipped with up to 44 in. tires, upgraded aftermarket axles, differential lockers, or any combination thereof. These are the ultimate steering upgrade packages, and PSC includes everything needed for a successful install.

Not Yet Reviewed

$3,400.00

—

$3,675.00

RideTech BigRed 4-Way Compressor Systems

RideTech BigRed 4-way compressor systems can be stacked in a clean manifold configuration, or taken apart and placed at each corner of the vehicle to speed up the response even more. Weatherpack wiring connectors allow plug-and-play installation and bubble-tight air valves ensure years of leak-free service.

Not Yet Reviewed

$2,120.00

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.5 out of 5 stars ( 20 )

$2,049.95

—

$2,609.95

Holley Sniper 2 EFI 650 HP Base Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.3 out of 5 stars ( 10 )

$2,049.95

—

$2,199.95

QA1 1963-72 C10 Coilover Conversion Systems

Upgrade your classic truck to a modern driving feel and performance with QA1's 1963-1972 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while reducing weight 140 lbs. over stock. Order the QA1 1963-72 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Adjustable Shock Valving: Double-adjustable shocks offer independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 5 )

$4,450.95

—

$4,650.95

QA1 1973-87 C10 Coilover Conversion Systems

Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 1 )

$4,450.95

—

$4,650.95

AccuAir Suspension Ultimate On-Board Air Compressor Systems

When it comes to getting everything you need to complete your air suspension system, sometimes getting everything you need in a comprehensive package is the best route to take. At AccuAir, they do the heavy lifting for you and offer everything you could ever want for your air ride system with their Air Suspension Ultimate Packages. AccuAir Suspension Ultimate on-board air compressor systems include an ENDO-VT air tank and an e+ Connect, which includes an ECU+, wireless switch box, an e-Level+ app, height sensors, and TouchPad+, making them the perfect top-of-the-line kits for anyone looking to get the best components for their air suspension management. Features and contents: * ENDO Valve-Tank, 4-corner, 5 gallon weld-free, leak-free, bolted aluminum construction with raw finish, precision machined aluminum components, and valves integrated into the air tank allowing for quicker installs and an overall cleaner presentation in your trunk, truck bed, or anywhere else you choose to mount your tank * e+ Connect allows wireless control over your air suspension system through the e-level+ app * e+ Height upgrades e+ Connect to e-Level+ with the addition of preset heights via included height sensors, harnesses, and hardware * e+ TouchPad: Connects to e+ECU for a hardwired interface, allows easy control of your suspension from the palm of your hand, magnetic mount TouchPad has an integrated compressor status indicator which is an LED indication of the status of your compressor(s) * Long-range Bluetooth 5.0 * 3/8 in. DOT/PTC fitting kit: -- 50 ft. 3/8 in. DOT nylon air line -- Black moisture trap/filter -- Fittings -- Loctite 565 anaerobic thread sealant * VIAIR 485C dual air compressors * Compressor power kit

Not Yet Reviewed

$3,499.95

QA1 C10 Crossmember Retrofit Kits

Already have a QA1 coil-over conversion system on your C10? QA1 C10 crossmember retrofit kits add powered rack and pinion steering, offers 2 in. of additional drop range (up to 8 in. total), and saves an additional 70 lbs. of weight. These bolt-in upgrades improved drivability and steering feel while achieving the perfect stance. Choose the kit for your model year. Features and benefits: * Powered rack and pinion steering -- Provides quicker and tighter steering, plus increased steering angle when fitting larger wheels and tires and improve geometry for enhanced drivability. * Improved ground clearance -- The tubular design makes your under cab rails the truck's lowest point. Updated lower shock mounts add clearance and new upper shock mounts increase travel for a great ride and performance, even at lower ride heights * Compatible with existing QA1 coilover systems -- Easily swap out a few components on your existing QA1 shocks and control arms, allowing you to upgrade your truck in stages, starting with coilovers and control arms * Easy, bolt-in installation -- The crossmember comes powder coated and ready to install, no cutting or welding your frame. It easily locates the steering rack, and you can choose mounts (sold separately) for common engines.

5.0 out of 5 stars ( 1 )

$2,450.95

Reid Racing Super Hydra 400 Transmission Cases

Redesigned and strengthened, Reid Racing Super Hydra 400 transmission cases address weaknesses and add features that improve every aspect of the Turbo 400. They build their Super Hydra 400 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission! A direct replacement for the GM case, Reid cases use an incredibly expensive permanent mold casting technique to increase the case wall thickness, making it sufficient to pass SFI 4.1 certifications without the need for any external shields or internal liners. Super Hydra 400s are massively tough, ductile, and leak-free—with the strength to handle rock crawling, as well as desert or short-course truck racing. Their modular, 2-piece design allows them to be used with all popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super Hydra 400 transmission cases are offered in drag/street and off-road versions, each with features geared specifically for those applications. Features: * Speedometer and governor provisions * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Additional dipstick hole on driver side * Multiple external pressure taps allow for monitoring of circuit pressures * Accept all style oil pumps, including 8-bolt and vari-pitch designs * Heli-coiled bellhousing and oil pump threads * Pre-machined to fit larger custom planetary gear carriers Off-road also includes: * Pre-machined side oil feed feature for 4L80-E center support * Front band anchor tapped for custom ARP anchor bolt (supplied) * Pre-machined bosses for input and output speed sensors * Un-machined speedometer boss for maximized 4x4 transfer case load support * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters * Available with a 4L80-E size pressure plate

5.0 out of 5 stars ( 4 )

$2,149.00

MSD Atomic EFI Throttle Body Systems

These MSD Atomic EFI fuel injection systems are the perfect choice for anyone planning on converting from carburetor to fuel injection. They include a throttle body, power module (with wideband oxygen sensor), and handheld controller. The throttle body features an integral ECU built on the side, incorporating the TPS, MAP, IAT, and fuel pressure sensors, all in one location. Fuel delivery is provided by four precision 80 psi injectors featuring a stainless steel ball and seat metering method for maximum internal sealing. They also use internal fuel rails, providing a sleek appearance and removing fitting connections where leaks can develop. Atop the Atomic EFIs are annular booster rings that deliver superior atomization of the best fuel mixture, ensuring the best possible fuel delivery. Best of all, the MSD Atomic EFI fuel injection systems bolt directly to any standard square bore carbureted intake manifold and accept the same linkage as most carburetors. The 1.75 in. diameter throttle inlets ride in precision roller bearings for a smooth pedal transition. The Atomic EFIs' unique TPS is a self-calibrating, non-contact sensor, which means that you don't have to worry about configuring it during setup. The included power module is a remote mounted piece that handles all of the high-current loads. MSD's CAN-Bus technology allows for a single, clean connection between these units and the throttle body mounted ECU. Control all of the MSD Atomic EFI fuel injection systems' functions with the hand-held device. Initial setup takes about five minutes, and you'll answer six questions about your specific engine. After the initial setup is complete, the device can provide you with engine data to help you keep your engine working properly. They also feature a removable micro-SD card to record and store data so that you can see what's going on with your engine.

4.37 out of 5 stars ( 119 )

$2,151.95

RideTech RidePro E5 Air Ride Suspension Control Dual Compressor Systems

RideTech RidePro E5 Air Ride Suspension Control dual compressor systems are pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. And adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 5-gallon tank * RidePro E5 digital control * Two Thomas compressors * 1/4 in. air lines and fittings * Perfect for vehicles over 3,500 lbs.

Not Yet Reviewed

$2,665.00

Reid Racing Super 80 Transmission Cases

Redesigned and strengthened, Reid Racing Super 80 transmission cases address weaknesses and add features that improve every aspect of the 4L80e. They build the Super 80 cases with full 360 degree internal case "lugs" that retain the center support and pressure plate. Not only are they lightweight and offer minimal drag, but their abuse tolerance has been kicked up several notches to handle high-horsepower levels without ending up with a ruined transmission. Reid Super 80 cases are massively tough, ductile, and leak-free with the strength to handle turbocharged muscle cars, drag cars, rock crawling, and desert truck racing. Their modular, 2-piece design allows them to be used with popular engines by simply changing bolt-on Superglide bellhousings. Reid Racing Super 80 transmission cases are SFI 4.1 certified without requiring any external shields. Features: * Improved billet steel pressure plate * Oversized snap ring * Longer band anchor pins captured by oversize bosses * Multiple external pressure taps allow for monitoring of circuit pressures * Heli-coiled bellhousing and oil pump threads * Front band anchor tapped for custom ARP anchor bolt (supplied) * Input and output speed sensors--bosses are dual machined to accept freeze plugs * Oil line ports machined for -AN fittings * Pre-machined with additional stud/nut clearance for Advance Adapters transfer case adapters

5.0 out of 5 stars ( 2 )

$2,318.00

RideTech RidePro E5 Air Ride Control BigRed AirPod Dual Compressor Systems

RideTech RidePro E5 Air Ride Control BigRed AirPod dual compressor systems offer all-in-one integrated, pre-wired solutions that mount in your vehicle as a single unit and adjust vehicle height at the push of a button while maintaining balanced air springs. With sophisticated pressure and height algorithms, RidePro E5 control systems tune air ride suspension for proper handling and world-class ride quality, so that each time your turn the ignition key, RidePro E5 self-adjusts to ride height and compensates for changes in load. They are ideal for trucks and other heavy applications to quickly raise and lower your vehicle and adjusting vehicle height is as simple as choosing one of three presets. You can also control the system wirelessly by simply connecting a compatible smartphone via Bluetooth and using the RidePro E5 app. RideTech RidePro E5 BigRed AirPod systems feature and include: * Full color TFT LCD. 3.5 in. display with multi-touch capacitive touchscreen * 4-button silicone keypad with backlit symbols for quick vehicle height changes * "Ride Height On Start" automatic lift and level feature * Display and setup via control panel, smartphone app or laptop * Weatherproof ECM and heavy-duty connectors * Automatic weight compensation (with optional height sensors) * Bluetooth connectivity to most smartphones for wireless control * Aluminum 5-gallon tank * 2 Thomas compressors * Big Red high-flow air valve solenoid block * RidePro E5 pressure based digital leveling system * 3/8 in. air lines and fittings and wiring * AirPod systems eliminate hours of installation time

5.0 out of 5 stars ( 1 )

$3,365.00

Fragola Performance Systems D-100 Crimping Machines

Fragola Performance Systems D-100 crimping machines are designed to be the easiest to operate—whether you are a novice, or crimp hoses for a living. Aluminum flanges and tubular frame make this a truly portable unit. It can also be bench mounted with predrilled holes in the base. The precision micrometer allows quick settings and gives 100 percent repeatability, time after time. Removable pusher allows fast changes between straight and angled fittings. Inverted die allows the operator to accurately position the fitting prior to the final crimp. Hand pump allows the user to "go anywhere" to make professional-quality crimps. This is the machine with hand pump only. Die sets and optional pneumatic pump are available (sold separately).

Not Yet Reviewed

$4,300.99

Holley Sniper 2 EFI 650 HP Return-Type Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

Not Yet Reviewed

$2,099.95

—

$2,249.95

Fleece Performance LML CP3 Conversion Kits

Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit

Not Yet Reviewed

$2,599.00

126 Results Found For "fitting"