Free Shipping on Orders Over $125 at Summit Racing

Scott Drake Hurricane Air Conditioning Kits

Don't lose your cool! Scott Drake Hurricane air conditioning kits are complete conversion packages with upgraded electronic controls. They will not fit generator-equipped cars. These kits contain everything you need to install these units in your vintage car. Scott Drake is a trusted manufacturer of quality aftermarket parts.

4.0 out of 5 stars ( 2 )

$2,099.95

—

$2,920.95

Be Cool Show & Go Modules

It's show time! Be Cool Show & Go modules will wow the judges with their mirror-like finish. Not only do these modules look show-car great, but their cooling performance will receive top honors as well! These power-cooling modules come with all you need to add stunning performance and appeal to your custom engine compartment. Pop your hood and let everyone appreciate the ultimate expression of cooling technology--the brilliance of American-made Be Cool Show & Go modules! Be Cool Show & Go cooling modules feature: * Polished performance-grade dual 1 in. core radiator * Black fans with billet Be Cool logo motor covers * Fan mounting brackets and hardware * Polished aluminum vented recovery tank * Polished billet aluminum radiator cap with Be Cool logo * Wiring harness with temperature control sending unit and relays

4.75 out of 5 stars ( 8 )

$2,399.99

—

$4,364.99

Garrett GTX Gen II Series Turbochargers

Garrett GTX Gen II Series turbochargers received a major compressor wheel aero update that gives them the ability to produce up to 20 percent more horsepower than the previous version, providing hard core enthusiasts with optimal performance. And they're available in standard or reverse rotation configurations. GTX Gen II compressor wheels were designed using proprietary Honeywell computer simulation technology—focusing on CFD analysis to optimize the wheel design to reach maximum efficiency and mass flow for each turbocharger. Each turbocharger has the ability to create more mass airflow, offering enthusiasts a wider range of power output when tuning the vehicle. Dozens of models are available; select the options that best suit your vehicle. Garrett Gen II GTX turbochargers feature: * Fully machined compressor inlet and outlet * Fully machined ported shroud * High-flowing compressor housing design matched perfectly for the compressor wheel upgrade * Compressor housings are equipped with a fully machined speed sensor port * 8mm dual ceramic ball bearing cartridge provides optimal turbo response and reliability

Not Yet Reviewed

$4,690.99

—

$4,935.99

Mishimoto Intercooler and Pipe Kits

Mishimoto intercooler and pipe kits let your engine breathe in the coolest, densest air possible to help improve performance and overall efficiency of heat dissipation, along with being strong enough to handle just about anything. Mishimoto performance intercoolers offer increased core volume and fin surface area, which results in increased flow, reduced outlet temperatures, and the ability to generate gains in horsepower and torque. Intercoolers are available in black or silver. Pipes are available polished or with a black powdercoat. As with all their products, the Mishimoto intercooler and pipe kits are backed by their signature Mishimoto Lifetime Warranty.

Not Yet Reviewed

$2,178.95

—

$2,199.95

BD Diesel Performance Fuel Injection Pumps

Don't trust fuel injection pump repairs or modifications to an ordinary diesel parts purveyor. BD Diesel Performance has been in the diesel fuel system business for more than 31 years and is a factory-certified Bosch, Stanadyne, Delphi, and Zexel calibration/repair lab. BD builds all diesel fuel injection pumps for stock applications, high performance street applications, race sled pullers, drag racers, and land speed racers.

Not Yet Reviewed

$2,705.95

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$2,399.95

—

$2,609.95

$2,158.95

—

$2,347.95

Summit Racing™ Pro LS 6.0L Rotating Assemblies

Summit Racing™ Pro LS 6.0L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

5.0 out of 5 stars ( 8 )

$2,608.87

—

$2,870.87

Ford Performance Parts Boss 302 Engine Blocks

The perfect foundation for your Boss engine--Ford Performance Parts Boss 302 engine blocks! They're built stronger than the originals to make your high performance build a success. Designed as replacements for the legendary Boss 302 and Boss 351 blocks, they use the latest technology and manufacturing techniques. Cast from diesel-grade iron with siamesed bores, thick cylinder walls and decks, Boss block strength is far superior to any Ford production block. Boss 302 blocks are available in standard and Big Bore versions that support engine sizes up to 363 c.i.d. Proven around the world, both on the track and on the street; all Ford Performance Boss 302 blocks are cast and machined to the highest industry standards in the USA. Features include: * Big Bore version features 4.125 in. bore capacity, finished at 4.115 in. rough bore * Standard bore version is finished at 3.990 to 3.995 in. rough bore with 4.125 in. bore capacity * 8.2 in. deck height, finished at 8.200 in. plus .010 to .015 in. * Optimized cylinder wall length for stroker applications up to 3.5 in. with no grinding or clearancing (depends on crank/rod manufacturer) * Splayed 4-bolt mains on 2, 3, 4, main caps * 2-bolt main on first and fifth main caps * Main bearing bores finished to low limit * Finished lifter bores * Machined to accept factory roller lifter guides and lifter guide retainer * Fits factory 1979-95 Mustang oil pan with custom oil pickup tube, part number: M-6622-BOSS302 * NASCAR inspired front oil feed on both lifter galleys * Revised cooling system passageways * Increased bulkhead material * Threaded core and galley plugs (straight thread port plugs with O-ring) * Require special length 1/2 in. head bolts M-6065-BOSS or head studs M-6014-BOSS recommended with M-6049-X306/307/Z304DA heads * Designed for M-6049-X306//X307/C3/D3/Z304DA cylinder heads * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Uses common O.D. cam bearings M-6261-J351/R351 * Unique cam plug M-6026-S351 included * M-6051-S331 or M-6051-CP331 head gasket recommended * Uses stock-type timing cover (M-6059-D351 recommended; includes fuel pump provision) * Retains clutch cross shaft pivot hole * Original-style oil filter location * Original motor mount boss locations * Original bell housing pattern * Approximate weights: Big Bore 163 lbs.; standard bore 175 lbs.

5.0 out of 5 stars ( 3 )

$2,265.99

On Sale

Holley EFI Digital Pro Dash Standalone Kits

Upgrade to Holley EFI Standalone Digital Pro Dash kits and get the facts on your engine! They offer two versions--both are full of features that support most any users, install almost anywhere, and just like traditional gauges install in almost anything. Holley's 6.86 in version actually measures 3.5 in. tall x 7.6 in. wide, is easily mounted in a console/dashboard, off a roll cage, or on a steering column, and includes a 10 LED shift light. The larger 12.3 in. version is for hard-core enthusiasts who want the ultimate display device, and measures 11.5 in. wide x 4.25 in. tall. Holley EFI Standalone Pro Dash units feature: * Standalone digital dashes--no ECU or fuel injection required * High resolution, state-of-the-art, multi-gauge touch screen display with fully configurable layouts: -- Full color, capacitive touch screen with auto dimming for crystal clear data--day or night -- Quickly swipe between multiple active screens (tune, warm-up, race, drive, etc.) -- Virtual switch panel eliminates the need for external toggle switches -- 16 default background skins pre-loaded with unlimited options for importing custom layouts -- Built-in GPS with speed, odometer and trip odometer function (external antenna included) -- Rendered analog (dials/needles) and digital gauge styles available -- Integrated datalogger -- Rugged, water-resistant case constructed of cast aluminum for long life and durability * Plug-and-play features are pre-configured in the harness and include dash layouts/screens for: -- Oil and fuel pressure, coolant and air temperature (utilizes plug-and-play Holley sensors, not included) -- Turn signals, high beam, fuel level, engine vacuum/boost * Additional input and output functionality: -- 13 multi-configurable inputs -- 4 ground switched outputs -- 4 speed channels (two dedicated) for rpm, driveshaft speed, or any other Hall effect speed input -- User definable channel alarms and warnings * Communications/harness: -- 4-pin wiring harness contains power, ground, and CANbus connections -- Holley EFI CANbus connection for expanded capability with Holley EFI systems -- Expandable storage via USB * Integrated datalogger: -- Internal log memory of 1GB (expandable up to 32GB with addition of micro-SD card) -- External logging to USB flash drive is also available for easy file management -- On-screen datalog playback allows you to review vital run information right on the dash -- Full analysis via laptop is available. Simply download the file to a USB drive and view with the free datalog viewer at Holley.com * Flexible mounting options: Surface or flush mounting—high-quality hardware included * Simple setup and programming: USB keyboard and mouse functionality * Fully upgradeable * Both dash versions include harness/cables, mounting hardware, USB memory stick, and CAN terminator * GPS antenna * Sensors not included

5.0 out of 5 stars ( 3 )

$2,299.95

$2,068.95

Summit Racing™ Pro LS 5.7L Rotating Assemblies

Summit Racing™ Pro LS 5.7L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

4.25 out of 5 stars ( 4 )

$2,610.87

—

$2,870.87

Borla ATAK Cat-Back Systems

Mount an offensive to regain optimum acoustics with Borla ATAK cat-back systems. Your modern muscle car will not only be performance-enhanced, but also acoustically tuned to a loud, aggressive exhaust note. ATAK (acoustically tuned applied kinetics) technology produces the highest dB levels, avoiding distortion to retain clarity. Tuned like a graphic equalizer, these cat-back systems are custom-tuned for your specific vehicle, delivering the most desirable sound to your ears. Plus, you retain all of the power-adding capabilities of Borla's multi-core design. The exhausts are handmade by master craftsmen from premium 300-Series austenitic stainless steel and ultra-smooth, mandrel-bent piping.

4.84 out of 5 stars ( 550 )

$2,014.99

—

$4,997.99

Summit Racing™ Pro LS 5.3L Rotating Assemblies

Summit Racing™ Pro LS 5.3L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

Not Yet Reviewed

$2,608.87

—

$2,868.87

Summit Racing™ Pro LS 6.2L Rotating Assemblies

Summit Racing™ Pro LS 6.2L forged rotating assemblies provide industry-leading fit, finish, and durability at an affordable price. These kits are tested to over 1,200 hp in turbo applications. They're available in a wide range of fitment and performance options. Standard features and specs may include: * 4340 forged steel crank * Core hardened to optimum strength, tempered, and nitride hardened * Lightening rod journals, gun-drilled mains, and profiled counterweights for better engine acceleration * Maximum journal tolerances of +/- .0001 to ensure consistent bearing clearance * Straight-shot oiling for maximum oil film strength at the maximum load angle * 4340 forged H-beam connecting rods * Designed for 5,000 ft./min. average piston speed in street and drag applications * 7/16 ARP 2000 rod bolts with 200,000 psi tensile strength; dual ribbed caps for maximum strength * Added stroker clearance and balanced to within +/- 1 gram per end * Full-floating and precision-honed in the USA to +/- .0001 in. * 2618 forged aluminum pistons * Ultra-modern 2618 alloy forgings for boost and nitrous with maximum ring land thickness * Pressure-fed pin oiling with durable chromium steel wrist pins * Specially profiled and coated piston skirts for stroker applications with tight piston-to-wall clearance * Generous valve reliefs for extra piston-to-valve clearance accommodate cathedral and rectangle heads * Premium steel piston rings * Steel top rings designed for maximum life with boost and nitrous * File-fit rings for maximum ring seal, reduced friction, and tensions optimized for wet sump engines * Martensitic ductile Napier-hook second rings for strength and maximum oil control * Premium main and rod bearings * Clevite H-bearings are designed for high-rpm operation in racing applications * Tri-metal bearings designed with high bearing crush for maximum retention * Medium eccentricity shells with precision wall tolerance of +/- .00015 in.

4.25 out of 5 stars ( 4 )

$2,589.87

—

$2,870.87

Cold Case Radiator Support Module Kits

Cold Case offers radiator support module kits for a variety of applications, including 1960s era Camaro LS engine swaps. Each module comes fully assembled and ready to bolt into your vehicle. They consist of an aluminum radiator support, big 1.25 in. tube dual-core crossflow radiator, two 3600 cfm fans/shroud combination, billet cap, and billet overflow tank. These units are very popular with high-tech, high horsepower builds in which maximum cooling is a must. Available in either standard Chevrolet outlet configurations or LS outlet configurations, they're 100 percent TIG-welded and ready to paint or polish. Radiator support module features: * Extra forward design will clear big block and LS front drives * Brushed aluminum finish * 2 row design with 1.25" tubes * Includes dual 14 in. 3600 cfm fans and shroud combination setup * Easy to install even in finished cars * Optional AC condenser and electronic fan controller upgrades available

2.2 out of 5 stars ( 5 )

$2,289.54

—

$2,671.54

Borla ATAK Axle-Back Exhaust Systems

Installed behind the rear axle, Borla ATAK axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (rear section) performance exhausts are less restrictive than factory exhaust systems. Welded tips are standard on most systems. ATAK (Acoustically Tuned Applied Kinetics) technology is designed for high-performance purists who prefer exhaust sound over their stereos. ATAK-equipped exhaust systems deliver the highest available dB (decibel) levels in the Borla street-legal lineup. Unlike inferior brands that lose significant sound quality at higher volumes, ATAK systems are tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. They are calibrated on a vehicle-by-vehicle basis and their specifically-tuned internal muffler cores deliver the most desirable sound. Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla ATAK axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation. Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla ATAK axle-back exhaust systems with the power of race-winning Borla Multicore technology.

4.61 out of 5 stars ( 157 )

$2,079.99

—

$3,199.99

Hooker Blackheart Exhaust Systems

At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only

4.44 out of 5 stars ( 48 )

$2,151.95

—

$2,213.95

EMAX Industrial Plus Silent Air Piston Compressors

EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings

4.75 out of 5 stars ( 16 )

$3,933.70

—

$4,980.00

Callies Mopar Engine Blocks

Callies Mopar engine blocks are Officially Licensed Mopar products. Together with Energy, Callies will manufactured and distribute cast iron engine blocks and components. All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data. The Mopar blocks are being offered in different bore sizes in finished and RoughBore (RB) versions.

Not Yet Reviewed

$3,170.66

—

$3,186.85

Be Cool Extreme Modules

Be Cool Extreme modules offer show-stopping looks and performance for your resto classic! If you want more bling than Be Cool Show & Go modules, their Extreme radiators provide the ultimate in American-made brilliance. They're available in a natural aluminum finish, or in show-polished assemblies with every component chromed or polished—to deliver extreme looks to your special ride. And their performance is, of course, super-cool! Be Cool Extreme module features: * Performance-grade dual 1 in. core polished radiator * Chrome plated high-torque fans with billet Extreme logo motor covers * Stainless steel electric and/or aluminum fan mounting brackets * Diamond-cut aluminum vented coolant recovery tank with Extreme logo * Machined aluminum Sure-Grip radiator cap with embossed emblem * Wiring harness with temperature control sending unit and 40 amp relays * Various radiator style options, including crossflow and downflow

4.0 out of 5 stars ( 7 )

$2,399.99

—

$4,999.99

On Sale

Holley Sniper 2 EFI 650 HP Returnless Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.0 out of 5 stars ( 2 )

$2,249.95

$2,023.95

Sonnax Smart-Tech Drum Modules

Sonnax Smart-Tech drum modules for racing GM TH400 transmissions improve on-track performance and consistency, leading to quicker ETs, more wins, and greater reliability. The TH400 is preferred for its overall durability and multitude of available ratios, but is known to be heavier and less efficient than the popular two-speed Powerglide. Part of the TH400 inefficiency results from the fact that the direct drum counter-rotates, spinning backwards in 1st gear, brakes to a complete stop on the 1-2 shift, then goes from 0 RPM to input RPM on the 2-3 shift. Significant energy is wasted through this cycle that robs power, upsets traction on the shifts, and contributes to broken internal parts. Compared to aluminum direct drums, the Smart-Tech drum module reduces the weight of the counter-rotating components by over 3.3 lbs.! And more significantly, because the weight of the Sonnax counter-rotating parts is closer to the centerline, there's a 68 percent reduction in energy required to stop and restart during the 1-2 and 2-3 shifts. The benefits are increased wheel horsepower, better acceleration, less shock on the shifts, and improved durability. * Complete kit (34555-01K) replaces both forward and direct drums and includes everything from intermediate sprag to the pump; a selection of Sonnax input shafts is available separately. * 100 percent new content, no used core pieces * Includes larger-diameter, 36-element sprag and sprag race that works with OE intermediate clutches * Includes six-friction forward clutch pack and seven-friction direct clutch pack Contents: * Forward Piston Housing * Forward Piston * Forward Piston Return Springs (16) * Forward Spring Retainer * Forward Snap Ring * O-Ring 1.674 in. * Lip Seals (2) * Direct Housing Assembly * Direct Piston * Direct Piston Return Springs (26) * Direct Spring Retainer * Direct Snap Ring * O-Ring 2.737 in. * Sprag Shaft * Front Sprag Retainer Plate * Heavy-Duty Sprag 36 Element * Outer Sprag Race * Rear Sprag Retainer Plate * Sprag Retainer Screws (4) 6-32 x 5/16 in. * Quad Ring Seals (2) * Anti-rotation Seal Rings (2) * Drum * Pressure Plate * Outer Snap Rings (4) * Bearing Small * Forward Clutch Hub * Bearing Large * Direct Clutch Hub * Steel Clutch Plates (4) .060 in. * Steel Clutch Plates (11) .077 in. * Friction Clutch Plates (13) .080 in. * Clutch Separators (60) .103 in.

Not Yet Reviewed

$3,052.40

CSF Intercoolers

CSF intercoolers are a complete, full line of intercoolers--with coverage ranging from Audi to Volvo. Several different styles are available, including plastic-aluminum and all-aluminum, with standard tube and fin cores as well as heavy-duty bar and plate cores. CSF OE-replacement intercoolers provide a drop-in fit requiring no modifications. All CSF intercoolers are built to OE specifications, and incorporate the same high-quality and value that CSF has been known for and has represented in the industry for decades.

4.22 out of 5 stars ( 18 )

$2,799.00

—

$4,799.00

PWR North America OE Fit Radiator Modules

PWR North America OE fit radiator modules offer you the latest in aluminum core designs for optimum cooling performance. With features like Spal fans, fluid coolers, unique fan mounting, and an exclusive upper soft mounting system, the PWR North America OE fit radiator modules can't be beat for performance and simplicity. These PWR radiator modules will lower oil temperatures better than any air to oil cooler! PWR's OE fit radiator modules are available in a range of applications to meet your specific cooling needs.

Not Yet Reviewed

$2,035.00

—

$2,289.00

KC HiLiTES Gravity Titan LED Light Bars

KC HiLiTES Gravity Titan LED light bars elevate the beloved Pro6 lights, increasing brightness, expanding coverage, and integrating an amber dust light for the ultimate, no-compromise lighting solution. Titan light bars revolutionize off-road lighting, merging KC's pioneering linkable and curve-able design of the Pro6, while amping up the performance. At their heart lies the innovative Titan core, driving three LEDs per optics, delivering a 1.3 times larger illumination zone, 1.7 times brighter output, and 1.3 times more beam distance than the Gravity Pro6. At the flip of the switch, alter between high-power mode for intense output and an integrated amber dust light for others to easily see you in dusty conditions. Featuring a patented pass-through front cooling system, the Titan ensures peak performance and durability, even in high-heat, high-demand situations. KC HiLiTES Gravity Titan LED light bars are available in several lengths and each one will include light covers and a complete wiring kit with 3-position switch to get up and running quickly. Choose the length you want. Features: * Dual power modes: -- Amber LED dust light: Acts as a marker light to be seen with in low-visibility conditions -- High-power mode: Offers intense lighting for nighttime trail use * Titan core: -- Patented pass-through front cooling: Provides superior thermal management. -- 3-source LED optics: Delivers comprehensive lighting coverage--short, mid, and long-range * Linkable and curve-able: Patented Infinity Ring system offers expandable widths and the option to curve or straighten your setup * Gravity reflective diode technology: Ensures unmatched beam precision and efficiency, providing brighter and more focused light * MoistureBlock Technology: An integrated plug built directly into the housing to keep water out, while maintaining a secure connection.

Not Yet Reviewed

$2,199.99

—

$2,999.99

59 Results Found For "core"