Free Shipping on Orders Over $109 at Summit Racing

Chevrolet Performance Transmission Installation Clutch Kits

Chevrolet Performance has taken the hassle out of transmission installation. Clutch kits are available on their own, or with other key components you need to complete the job more easily. Choose the kit that's appropriate for your particular transmission—and experience a faster installation utilizing the quality Chevrolet Performance parts included.

5.0 out of 5 stars ( 2 )

$2,193.36

Silver Sport EasyFit Tremec TKX Transmission Kits

Silver Sport EasyFit transmission kits are designed to be the perfect start to your TREMEC TKX installation. The kits are tailored with a vehicle-specific shifter position and components to make your installation easy and less costly. Features and specs: * STX Shifter--short throw shifter (depending on kit) * Transmission mount, reverse light harness, pilot bushing, and required hardware * 5-speed pattern shifter ball or 5-speed shift pattern console plate (depending on kit) * EDP coated, steel crossmember (depending on kit) * Gear ratios--2.87, 1.89, 1.28, 1.00, 0.68, 2.56R * 600 lb.-ft. torque rating * 26-spline count input shaft * Quality-tested with a 12-month factory warranty

4.0 out of 5 stars ( 6 )

$4,095.00

—

$4,495.00

American Powertrain ProFit Tremec TKX Manual Transmission and Installation Kits

American Powertrain ProFit Tremec TKX manual transmissions and installation kits put the power to the pavement with unmatched durability and versatility. Tremec has normally sourced their aftermarket transmissions from the OE side, such as the Magnum T-56 and the T-5, but this new design is made from the ground up as a strictly aftermarket transmission. Designed to fit classic muscle cars and customs, the TKX has a tighter, more streamlined case, and features 600 lbs.-ft. of torque capacity and are capable of engines speeds of 8,000 rpm with shifts at 7,500 rpm. The compact design provides clearance in most transmission tunnels without floor modifications, while case strength has increased from previous models with the new 3-piece aluminum housing and gaskets at all flanges simplifies installation and eliminates fluid leaks. Additional features include: * Designed with your specific vehicle application in mind * Available with multiple gear ratio configurations for compatibility for multiple applications with three shifter locations * Multi-cone synchronizers and synchronizer rings are made of sintered bronze and carbon for superior shifts * All gears are supported by caged needle bearings to reduce end play * Gears and shafts are made from ASTM 4615 grade steel and provide increased torque carrying capacity * TKX manual transmissions have 31-spline output shafts for added strength, built-in reverse light switches, and cruise control safety switches * The TKX also has separate GM and Ford case patterns and input configurations—with integrated GM and Ford transmission mount patterns * Installation kits include a driveshaft slip yoke made from cryogenically hardened steel, a polyurethane transmission mount, a steel roller pilot bearing, and a reverse light wiring harness

5.0 out of 5 stars ( 1 )

$3,995.95

—

$4,559.95

Holley Complete T5 Transmission Installation Kits

Holley transmission installation kits come complete with everything you need to bolt a T5 transmission to a 28- or 50-ounce externally balanced small block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5-pound, 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included

Not Yet Reviewed

$2,202.95

ACT Mod-Twin 225 Heavy-Duty Twin-Disc Street Clutch Kits

ACT Mod-Twin 225 heavy-duty twin-disc street clutch kits are designed to tackle aggressive launches and rapid shifting of high powered AWD's—by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a more consistent light pedal feel. The puck-style friction plates, with high-quality organic materials, deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. Clutch kits are available in different styles and other options for fitment on countless vehicles from the early 2000s and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or unsprung mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.

Not Yet Reviewed

$2,010.00

—

$2,106.00

On Sale

Holley Complete TKX or TKO Transmission Installation Kits

Holley transmission installation kits come complete with everything you need to bolt a TKX or TKO transmission to a 28- or 50-ounce externally balanced small-block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include: a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5 lb., 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included

3.5 out of 5 stars ( 2 )

$2,202.95

ACT Mod-Twin 225 Extreme Twin-Disc Race Clutch Kits

ACT Mod-Twin 225 Extreme twin-disc race clutch kits will provide aggressive launches and rapid shifting of high powered AWD's--by combining twice the ceramic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a consistent light pedal feel. The puck-style friction plates with high-quality ceramic materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design of these clutch kits allows for quicker shifts and lasting trouble-free service. Different styles and other options are available for vehicle fitment from 2003 and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style ceramic friction plates * Available with sprung or rigid mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.

Not Yet Reviewed

$2,044.00

—

$2,103.00

ACT Mod-Twin 225 Extreme Twin-Disc Street Clutch Kits

ACT Mod-Twin 225 Extreme twin-disc street clutch kits will provide aggressive launches and rapid shifting of high powered AWD's--by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive 4-stage heat treating process to provide a consistent light pedal feel. The puck-style friction plates with high-quality organic materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub which is heat-treated for strength and durability, extending input shaft life with one continuous spline. The lightweight, rigid design of these clutch kits allows for quicker shifts and lasting trouble-free service. Different styles and other options are available for vehicle fitment from 2003 and up. Features and benefits: * Recommended for drag, road, or rally racing use * Predictable aggressive engagement, light pedal effort, smooth shifting, possible start-off judder with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, premium friction materials, and hardened wear points ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced and SFI certified Kit contents: * Forged aluminum pressure-plate cover * CNC-machined and dynamically balanced flywheel * Diaphragm spring and face * Puck-style organic friction plates * Available with sprung or rigid mono-drive hub assembly * Floater * Patented mono-Loc collar * Release bearing * Alignment tool and pilot bearing (if needed) Note: Mod-Twin clutches are fully rebuildable and most components can also be ordered separately, if you do not need to purchase complete kit.

Not Yet Reviewed

$2,006.00

ACT Mod-Twin 10.5 Extreme Race Clutch Kits

ACT Mod-Twin 10.5 Extreme Race clutch kits tackle aggressive launches and rapid shifting of high-powered machines by combining twice the ceramic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process to provide a consistent light pedal feel. Puck-style friction plates with high-quality ceramic friction materials deliver high friction coefficient, superior heat capacity, and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability extending input shaft life with one continuous spline. The lightweight, rigid design allows for quicker shifts and trouble-free service. These kits include a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, rigid mono-drive hub, floater, patented mono-loc collar, release bearing, alignment tool and pilot bearing (where applicable). ACT's Mod-Twin clutches are also fully rebuildable, and replacement discs may be ordered separately. Product features: * Recommended for Drag, Road or Rally Racing * Predictable, aggressive engagement, light pedal effort, quick shifting, possible start-off judder with mild to moderate transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, and premium friction materials ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified

Not Yet Reviewed

$2,056.00

—

$2,361.00

Centerforce TRIAD DS Clutch Kits

Centerforce TRIAD DS clutch kits have been developed for vehicles requiring a holding capacity of 500 to 1,100 lbs.-ft. of torque at the crank. These patented Drive System (DS) multi-disc clutches are smaller and lighter, offering many features and advantages for quick-revving vehicles, and include pressure plate, discs, floaters, flywheel, pilot bearing, bolts, and tool. The billet pressure plate features Centerforce's patented centrifugal weight system (where applicable) for superior clamp load over stock and their patented ball bearing actuated pressure plate (where applicable) provides light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar® full-facing friction material providing increased holding capacity. TRIAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker rpms. Centerforce TRIAD DS clutches are match balanced and ready for installation using the included ARP fasteners. Choose the kit designed for your vehicle.

Not Yet Reviewed

$2,288.95

American Powertrain Tremec T-56 Magnum Manual Transmissions and Installation Kits

American Powertrain Tremec T-56 Magnum manual transmissions and installation kits are designed to withstand up to 700 lbs.-ft. of torque. Their gears feature substantially increased face widths and 2-piece laser-beam welded construction, allowing for greater control of the tooth angles, pitch, and alignment. The transmissions also include a bolstered one-piece countershaft to resist distortion, and a stronger input shaft. Magnum's new synchronizers are built with fine-tooth angles, redesigned shift forks—and an extensively modified transmission case to prevent leaks under high-stress conditions and increase overall power-handling capabilities. Nearly two dozen models are available; choose the kit recommended for your vehicle application. Kits include: * Cryo-hardened steel driveshaft slip yoke with 1330 style U-joint * Mechanical speedometer conversion * VSS wiring harness for electronic speedometer of EFI ECU * Reverse light wiring, weather seal harness, non-polar * Reverse lockout wiring harness * ISO-X ballistic, low-profile transmission mount * Steel roller pilot bearing * White shift knob with black 6-speed shift pattern

Not Yet Reviewed

$4,750.95

—

$4,995.00

Impact Racing Nitro Vectran Chute Kits

Impact Racing Vectran drag chute kits feature an 8-line crossform design and were specifically developed for use on 200+ mph cars. The 12 ft. all-Vectran panel construction offers a 20-percent lighter product—and improved abrasion and fire resistance over a comparable nylon chute. They also include longer shroud lines for a low and straight deployment with a softer deceleration at launch. Includes: Outer black Nomex pack, lanyard, and Impact compression spring launch pilot parachute.

Not Yet Reviewed

$2,699.95

Mishimoto Air-to-Water Performance Intercooler Power Packs

Mishimoto air-to-water performance intercooler Power Packs include S55 Performance intercooler, heat exchanger, and charge pipe kit to strengthen weaknesses in the BMW's design. The Power Packs are offered in a choice of 12 BMW-specific color matching options or classic black, so your go-fast parts in the engine bay can now match the exterior beauty of your BMW. Mishimoto's charge pipes feature full-aluminum construction with a cast mid-section and matte black silicone couplers that can handle the boost pressure, unlike the factory plastic that can crack under pressure, or split at the seams, creating a less than ideal situation as you pilot your vehicle. Next, the non-descript box is replaced with a stylish, colorful air-to-water intercooler featuring a bar-and-plate core with increased core volume and a single-pass coolant flow layout for optimal heat transfer. Adding to both these improvements is Mishimoto's larger full-aluminum heat exchanger providing increased external fin surface area and core volume. Additional features and specs: * 12 degree F drop in intake air temperatures and 10 degree F reduction in global intercooler coolant temperatures * Dyno-proven average power gains of 11 WHP and 8 WTQ with peak gains of up to 31 WHP and 10 WTQ on Stage 1 tuned vehicle * Intercooler features unique bar-and-plate, single-pass coolant passage design, and cast aluminum end tanks for optimal flow and cooling capacity * Intercooler core volume increased by 29 percent with 16 percent improved flow * Heat Exchanger features all-aluminum construction with 180 percent increase in fin surface area and 60 percent increase in core volume * Heat exchanger includes optional stone guard for added protection against road debris * Heat exchanger utilizes variable fin pitch for improved flow to DCT cooler * Mishimoto lifetime warranty

Not Yet Reviewed

$2,521.95

Simpson Professional Series Parachutes

Simpson Professional Series parachutes, or drag chutes, have kept thousands of race cars out of the sand for decades. Some of the fastest and quickest cars on the planet depend on Simpson parachutes to bring them to a halt, safe and sound. Their handmade Professional Series chutes feature 14 ft. canopies in Kevlar® or nylon with Kevlar® shroud lines. The yellow, all-Kevlar® constructed chutes provide less weight, increased speed, and a safer racing environment with increased fire protection. They have a cross-form design for top performance at speeds of 300+ mph and include pack and pilot chute. The Professional nylon chutes include pack and are available in several chute colors. Going fast is great, stopping is even greater. Choose the Simpson parachute you desire for your racing needs.

Not Yet Reviewed

$2,254.95

ATS Diesel Performance Stage 6 Automatic Transmission Rebuild Kits

ATS Diesel Performance Stage 6 automatic transmission rebuild kits are designed to give that old worn-out transmission a face lift and put the power to the ground! ATS Diesel takes the potent Allison 1000 platform and bulletproofs it with the parts you need in these Stage 6 rebuild kits to give you the edge over the track, towing a trailer or the competition. Stage 6 kit features: * Includes Triplelok torque converter * Pump calibration kit * ATS C1-C5 clutches * Valve body calibration (A and B trim valves) * Handles street/strip, sled-pulling, up to 1000rwhp and can still be daily driven * Co-pilot should be added to this kit (not included) to increase hydraulic torque capacity ATS manufactured C1, C2, C3, C4 and C5 clutch packs include: * C1 includes: ATS exclusive 16 single-sided friction plates with HD pressure plate * C2 includes: Eight friction plates and eight laser-cut steel plates with step ground pressure plate * C3 includes: Five ATS exclusive full friction plates and laser-cut steel plates with micro ground pressure plate * C4 includes: Six frictions and five laser-cut steels * C5 includes: Six frictions and five laser-cut steels

Not Yet Reviewed

$3,564.99

ATS Diesel Performance Stage 7 Automatic Transmission Rebuild Kits

ATS Diesel Performance Stage 7 automatic transmission rebuild kits are designed to give that old worn-out transmission a face lift and put the power to the ground! ATS Diesel takes the potent Allison 1000 platform and bulletproofs it with the parts you need in these Stage 7 rebuild kits to give you the edge over the track, towing a trailer or the competition. Stage 7 kit features: * Includes Triplelok torque converter * ATS pump kit * ATS C1-C5 clutches * Valve body calibration (A and B trim valves) * ATS Co-pilot transmission controller * Increased towing capability, power holding to 1000+ hp * Best for mild street/strip and sled pulling use ATS manufactured C1, C2, C3, C4 and C5 clutch packs include: * C1 include: ATS exclusive 16 single-sided friction plates with HD pressure plate * C2 includes: Eight friction plates and eight laser-cut steel plates with step ground pressure plate * C3 includes: Five ATS exclusive full friction plates and laser-cut steel plates with micro ground pressure plate * C4 includes: Six frictions and five laser-cut steels * C5 includes: Six frictions and five laser-cut steels Note: Deep transmission pan required for Co-Pilot install.

Not Yet Reviewed

$4,654.99

ATS Diesel Performance Stage 2 Transmission Packages

ATS Diesel Performance Stage 2 transmission packages eliminate the factory weaknesses and design flaws. Your transmission is stout enough to handle stock power, but what happens when the power is modified and goes above and beyond? Stage 2 packages deliver not only the ATS Five Star billet torque converters with patented Vikus clutch drives and deep pans, but also their revolutionary Co-Pilot electronic transmission controller or billet input shaft (depending on your application). All high-stress areas of the case are reinforced, and the external surface is sealed. Racer, puller, or long-hauler, ATS Diesel Stage 2 transmission packages will give you the edge.

1.0 out of 5 stars ( 1 )

$4,364.99

TCI 4x Four-Speed GM Automatic Transmission Packages

TCI 4x Four-Speed GM automatic transmission packages for externally balanced small block Fords allow you to bolt up your Ford engine to TCI's 4x Four-Speed electronically controlled 4L80E-based transmission or their non-electronic 700R4-based transmission. Bolting right up to your engine like a stock transmission, they make it easy to adapt either of these proven transmissions to any compatible engine by including the exact bellhousing, a special adapter flexplate, pilot adapter, dipstick, and other accessories in a complete package. The 700R4-based transmission uses a Constant Pressure Valve Body to eliminate the need for careful TV cable tuning, the most common cause of 700R4 transmission failure. If you choose the 4L80E-based 4x transmission, these controls are handled electronically by your choice of the TCI EZ-TCU, TCU 2.0, or a factory GM transmission controller. All 4x Four-Speed transmissions are automatic overdrive 4-speeds with lock-up, so simply choose the one that fits your power level.

Not Yet Reviewed

$4,254.95

—

$4,392.95

Tremec TR-4050 Manual Transmissions

Tremec TR-4050 manual transmissions are similar to the NV4500, a direct replacement with 600 lbs.-ft. of torque capacity. The diecast aluminum alloy housing saves weight while offering considerable rigidity. These 5-speed with overdrive 4WD transmissions are fully synchronized for smooth shifting and reduced shift effort. Additional features and specs: * Aggressive 6.16 "Granny" Gear 1st gear but with economical .76 5th gear * High-contact, constant mesh, helical gears for maximum strength * Standard right-hand, 6-bolt PTO offers the ability to run hydraulic pumps * The multiple rail, internal shifter provides excellent shift feel and performance * Tapered bearing on input, main, and counter shafts provide excellent internal stability * Needle bearings under gears reduce friction and noise output * Advanced synchronizer technology promotes smoother shifting and reduced shift effort * 5th gear synchronizer mounted to the countershaft to improve NVH in overdrive * 3.67 qt oil capacity * Gear ratios: 6.16, 3.11, 1.71, 1, .76 od. rev 6.03 – 10 spline input shaft / Output 23-spline – Torque rating 600lb-ft – A 6-bolt PTO mount location 6-bolt circle output flange – NV4500 bolt pattern Specs: * Torque Capacity: 600 lbs.-ft. / 813 n/m * Oil Capacity: 3.7 qt. / 3.5 liter * Weighs 164 lbs. / 74kg * 19.5 in. overall length * .590 in. pilot diameter * 5.125 in. index retainer diameter * 1.125 in. input shaft diameter, 10-spline, 6.5 in. length

Not Yet Reviewed

$3,295.00

ACT Mod-Twin 10.5 Heavy-Duty Street Clutch Kits

ACT Mod-Twin 10.5 Heavy-Duty Street clutch kits blend easy pedal feel, smooth but positive engagement with quick shifting for high-powered street machines by combining twice the organic friction surfaces with a no-nonsense solid mono-drive hub in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process to provide a light and consistent pedal feel. Steel-backed friction plates with high-quality performance organic friction materials deliver stable friction coefficient, improved heat capacity and long clutch life. These friction plates uniformly transfer torque to a mono-drive chromoly hub, which is heat-treated for strength and durability, extending input shaft life with one continuous spline. Lightweight, rigid design allows for quicker shifts and trouble-free service. The kits include a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, rigid mono-drive hub, floater, alignment tool and pilot bearing (where applicable). Mod-Twin clutches are fully rebuildable, and replacement discs may be ordered separately. Product features: * Recommended for Street or Street/Strip * Soft, progressive engagement, lightest pedal effort, smooth shifting with mild to moderate transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, and premium friction materials ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified

Not Yet Reviewed

$2,005.00

—

$2,233.00

Valair Performance Competition Triple Disc Clutch Kits

Valair Performance Competition Triple Disc clutch kits are the perfect choice for your high-horsepower torque monsters. These kits feature premium materials, superior construction, and are designed for 950+ hp. The heavy-duty flywheel, floater plates, and pilot bearing are just a few of the included elements in each kit. Order the Valair Performance Competition Triple Disc clutch kit designed for your vehicle, engine, and transmission application.

Not Yet Reviewed

$2,777.78

—

$3,200.00

Milwaukee M18 FUEL Magnetic Drills

Milwaukee M18 FUEL magnetic drills drill faster than the number one corded competitor. The 1 1/2 in. tools deliver the strongest magnetic hold on 1/4 in. steel, providing a safer drilling environment in this material—and they drill over (40) 13/16 in. holes per charge. By utilizing permanent magnets, the magnetic base operates without electricity; this ensures that the magnet does not deactivate if the battery is drained. Equipped with auto-stop lift-off detection, power to the motor is automatically cut if excess rotational motion is detected while drilling. Powered by a Powerstate brushless motor, the drills are faster than their corded counterparts, and deliver the same 1 1/2 in. annular cutter capacity. REDLINK PLUS intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. Models are available with the tool only; or in kits that also include two M18 REDLITHIUM High-Output XC8.0 batteries, an M18 and M12 rapid charger, 3/4 in. Weldon to 1/2 in. chuck adapter, chuck key, magnetic lubrication tank, safety strap, 1 in. retractable pilot pin, and carrying case.

Not Yet Reviewed

$2,628.99

Valair Performance Competition Dual Disc Clutch Kits

Valair Performance Competition Dual Disc clutch kits are constructed with top-of-the-line materials and built-to-order, ensuring you get exactly what's needed for your application. These assemblies contain many parts, including a dual disc flywheel, release and heavy-duty pilot bearings, and ceramic clutch discs. They're able to handle up to 800 hp on your land-based beast and require the installation of a heavy-duty hydraulic kit. Get crisp shifts and high performance with a Valair Competition Dual Disc clutch kit, available in sizes and options to fit countless vehicles.

Not Yet Reviewed

$2,016.95

—

$2,087.72

ACT Mod-Twin 10.5 Extreme Street Clutch Kits

ACT Mod-Twin 10.5 Extreme Street clutch kits are designed for high-powered street machines. These clutch kits unite uncompromised pedal feel, durability, engagement quality with very high-torque capacity by combining twice the organic friction surfaces with an ultra-durable sprung mono-drive hub assembly in a completely modular design. Each diaphragm spring endures an exclusive four-stage heat treating process to provide a consistent light pedal feel. Steel-backed friction plates with high-quality organic friction materials deliver stable friction coefficient, good heat capacity and long clutch life. These friction plates uniformly transfer torque to the mono-drive sprung hub assembly, which extends input shaft life and reduces driveline shock from torsional vibration. The kits include a CNC-machined and dynamically balanced flywheel, pressure plate cover, diaphragm spring, face, puck-style ceramic friction plates, sprung mono-drive hub assembly, floater, alignment tool and pilot bearing (where applicable). In addition, Mod-Twin clutches by ACT are also fully rebuildable, and replacement discs may be ordered separately. Product features: * Recommended for Street or Street/Strip use * Soft, progressive engagement, light pedal effort, smooth shifting with OE to mild transmission gear noise * Forged aluminum cover, mono-drive hub, exclusive diaphragm, and premium friction materials ensure this long-life twin performs and survives under the most demanding conditions * Delivers maximum performance and high heat tolerance by combining robust design, strategic features, choice materials, and close tolerances * 100 percent clamp load tested, balanced, and SFI certified

Not Yet Reviewed

$2,003.00

—

$2,266.00

64 Results Found For "Pilot"