Free Shipping on Orders Over $109 at Summit Racing

Russell ProClassic II Hose

For the traditionalist, Russell offers their ProClassic II black hose. If your belief is that the hose you use to plumb your ride or racer should be black, then ProClassic II is for you. The all-black nylon fiber braid of the outer cover wraps around a CPE synthetic inner liner for abrasion resistance. Plus, the chlorinated polyethylene inner liner has a bonded, multi-braid stainless steel wire to improve the bend radius, with less possibility of collapsing when plumbing those tight areas. Safe for fuel, oil, antifreeze, and other fluids, Russell hose is easy to cut and easy to assemble. For classic looks and professional quality you can count on under the hood, choose Russell ProClassic II hose—available in a variety of lengths and AN sizes.

4.67 out of 5 stars ( 39 )

$2,699.95

Fragola Performance Systems D-100 Crimping Machines

Fragola Performance Systems D-100 crimping machines are designed to be the easiest to operate—whether you are a novice, or crimp hoses for a living. Aluminum flanges and tubular frame make this a truly portable unit. It can also be bench mounted with predrilled holes in the base. The precision micrometer allows quick settings and gives 100 percent repeatability, time after time. Removable pusher allows fast changes between straight and angled fittings. Inverted die allows the operator to accurately position the fitting prior to the final crimp. Hand pump allows the user to "go anywhere" to make professional-quality crimps. This is the machine with hand pump only. Die sets and optional pneumatic pump are available (sold separately).

Not Yet Reviewed

$4,300.99

Ford Performance Parts 2018-20 Gen 3 Coyote Control Packs

Ford Performance Parts 2018-20 Gen 3 Coyote control packs are designed to run 2018-20 5.0L Mustang GT Coyote (Gen 3) automatic transmission engines with 10R80 Mustang GT 10-speed transmissions. They include a unique control pack harness, which replaces the stock body harness. These Ford Performance control packs were designed for performance enthusiasts who want the Gen 3 Coyote package in their own custom build. Includes: * PCM with Ford Performance calibration (requires return-type fuel system; not compatible with return-less-type) * Electronic throttle control accelerator pedal, eliminating throttle cable routing problems * OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Power distribution module * Mustang GT air box * Mustang GT air inlet tube * MAF sensor * Upper and lower radiator hoses * HEGO sensors

Not Yet Reviewed

$2,201.99

Ford Performance Parts 2021-23 Coyote 5.0L Control Packs

Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system

5.0 out of 5 stars ( 1 )

$2,322.99

—

$2,462.99

Aeromotive Stealth Eliminator Street Fuel Systems

Aeromotive Stealth Eliminator Street Fuel systems are complete kits for EFI engines producing up to 1,400 flywheel hp forced induction or 1,900 flywheel hp naturally aspirated on gas. The systems provide fuel rails and Aeromotive's fuel pump speed controller for continuous duty street/strip applications. These serious Aeromotive kits also include all the necessary hard parts and feature their Stealth Eliminator fuel pump designed to fit inside the stock OEM tank and integrate with the stock fuel-level sending unit (and jet-siphon transfer pump). The systems are available for several different applications. Systems include: * Billet high-flow fuel rails * Billet EFI fuel pressure regulator * Stealth in-tank fuel pump assembly * Fuel pump speed controller—designed to keep fuel cool in cars that will see extended street driving but still need full pump performance for all out racing * Billet filter bracket * High-flow, 40-micron filter assembly * One-way check valve * High-flow ORB port fittings * One-piece CNC Y-block * Fuel-resistant nitrile O-rings

Not Yet Reviewed

$3,461.30

Nitrous Express Nitrous Plumbing Kits

Nitrous Express offers several nitrous plumbing kits highlighting their selection of precision nozzles. Available with Shark, Piranha, SSV, STD, or dry nozzles, these direct port NX kits contain all of the right components to get the performance flowing in your setup. The kits include stainless steel tubing, B-nuts, sleeves, distribution blocks or hex rails, fittings, lines, and jetting. They are available with or without solenoids. Plumb your setup with nitrous kits that offer more flow and more go from Nitrous Express.

5.0 out of 5 stars ( 1 )

$2,399.30

PSC Jeep JL/JT Cylinder Assist EHPS Steering Kits

PSC Jeep JL/JT Cylinder Assist EHPS (Electric-Hydraulic Power Steering) steering kits deliver improved handling characteristics without oversteer and a familiar level of road feel without increased driver effort for your Jeep Wrangler or Gladiator. Choose the preferred kit for your Jeep. Features: * Increased Torque Output * Relieves stress on steering gearbox and frame mounts * Steering Assist Cylinder acts as a dynamic steering stabilizer * Fully assembled hoses and fittings, ready to bolt-on for quicker, easier installation * All mounting brackets and hardware * EHPS boost kit for increased pump pressure * XDR steering gear featuring PSC's proprietary high-flow spool valve * High-capacity remote power steering fluid reservoir * Assist Cylinder kits--factory and aftermarket axles * Compatible with the factory pitman arm * Bolt-on heat sink fluid cooler kit * Tie rod clamp available in 1 1/4 in., 1 3/8 in., 1 1/2 in., 1 5/8 in., and 1 3/4 in. sizes

Not Yet Reviewed

$2,520.00

—

$3,848.00

ADS Race Short Smooth Body Shocks

ADS Racing short smooth body shocks were born from years of desert racing experience. Performance, reliability and longevity were the primary concerns when ADS set out to develop its smooth body dampers, and they have not strayed from that initial thought process. Years of racing will teach you that, if something can go wrong it will go wrong. With that mindset in place, eliminating the possibility of failure was the primary goal. Every single component on an ADS Racing shock has a purpose—from the screw-in end cap reservoirs, to enhanced flow in critical areas that reduces heat buildup and harshness, these reductions in restriction amplify traction potential and driver control. Large capacity reservoirs aid in cooling as well as reducing pressure gain in the system. Large diameter shafts increase strength for extreme applications and stand up to the abuse of racing time and time again. All these features together deliver a bulletproof shock that is guaranteed to perform on your race car or weekend warrior. The gas-charged shocks are available in a variety of extended/collapsed lengths. Sold in pairs. Various options include: * Shocks with a remote reservoir * Shocks with a remote reservoir with compression adjuster * Shock with a remote reservoir with a 90 degree hose * Shock with a remote reservoir with a 90 degree hose and a compression adjuster

Not Yet Reviewed

$2,049.95

PSC Jeep JK Big Bore XD Steering Cylinder Assist Kits

PSC has taken the Jeep JK steering system back to the drawing board and engineered their exclusive Jeep JK Big Bore XD steering cylinder assist kits. These kits resolve the original steering issues, and efficiently handle the increased torque loads on vehicles equipped with up to 44 in. tires, upgraded aftermarket axles, differential lockers, or any combination thereof. These are the ultimate steering upgrade packages, and PSC includes everything needed for a successful install.

Not Yet Reviewed

$3,400.00

—

$3,675.00

Wilwood TX6-DM BB Truck Front Brake Kits

Wilwood Tactical Extreme TX6-DM Big Brake kits are the ultimate in braking performance for truck, SUV, and armored vehicles. Pairing TX6-DM direct-mount 6-piston calipers and massive 15 in. GT slotted alloy rotors, these ready-to-bolt-on kits deliver consistent stopping power and extreme-duty durability under sustained high heat. The calipers are volume matched for compatibility with original equipment power brake system output, and include all the necessary hardware to complete the installation. Wilwood TX6-DM BB kits are engineered to fit many heavy duty trucks and most 20 in. and larger wheels. They are designed to be fully compatible with factory rear brakes, master cylinders, ABS, and computer systems. The TX6-DM kits provide more consistent braking and pedal feel with increased thermal capacity to inspire confidence in high-demand applications, including towing, hauling, and commercial use. Kits are available with black or red powdercoated calipers. Select the kit designed for your vehicle with the color caliper preferred. Features: * Directly mounts to factory spindles and hubs with no modifications or additional brackets * TX6-DM calipers: -- Stress-flow forged aluminum -- Engineered for direct mounting -- Six differential bore pistons for balanced engagement -- Reinforced end bridges to reduce deflection * GTB slotted rotors: -- Premium, iron alloy vented hat/rotor for heavy-duty use -- GTB slotted faces with 48 internal vanes for better thermal cooling -- Complete E-coating applied to resist corrosion inside and out * SmartPad BP-Q brake pads: -- Ceramic-based, dual sport pads -- Everyday street or performance driving * Stainless steel flex line kits (where applicable) and premium-grade hardware Please note: Braided stainless steel flex lines may need to be purchased for some applications.

Not Yet Reviewed

$2,727.95

Special Offer

Nitrous Outlet Holley Hi-Ram Nitrous Spacer Plate Systems

For higher horsepower levels, proper nitrous flow into the airstream is critical for even cylinder to cylinder distribution. Holley Hi-Ram nitrous spacer plate systems are equipped with nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. The spacer plates are available in single and dual stage kits, complete with everything you need to spray up to 300 hp. (With additional jetting, the single stage can spray up to 400 hp, and the dual stage can spray up to 800 hp.) They include all electrical, hardware, gasket, brackets, and jetting for 50-100-150-200-250-300 hp.

Not Yet Reviewed

$2,032.99

—

$2,781.99

PSC Hydraulic Assist Steering Systems

Oversize tires, lockers, and rocks will quickly have your stock steering system whining for help. Increase turning force by an average of 50 percent with PSC hydraulic assist steering systems. They feature a new hydraulic-assist steering cylinder with all required mounting brackets, hoses, and fittings. Their new steering gear boxes have been modified for cylinder assist. The valving remains stock to allow OEM handling, control, road feel, and no oversteer. PSC hydraulic assist steering systems turn taller tires like they're stock.

4.33 out of 5 stars ( 12 )

$2,565.00

—

$3,375.00

PSC Jeep JT Big Bore XD Steering Cylinder Assist Kits

PSC has taken the Jeep JT steering system back to the drawing board and engineered their exclusive Jeep JT Big Bore XD steering cylinder assist kits. These kits resolve the original steering issues, and efficiently handle the increased torque loads on vehicles equipped with 37 in. or larger tire sizes, upgraded aftermarket axles, differential lockers, or any combination thereof. Jeep JT Big Bore XD steering cylinder assist kits feature: * Increased torque output * Relieves stress on steering gearbox and frame mounts * Steering assist cylinder acts as a dynamic steering stabilizer

Not Yet Reviewed

$3,500.00

—

$3,933.00

Wagner Tuning Competition Intercoolers

Wagner Tuning competition intercoolers replace your OEM unit with performance gains and low intake temperatures. Optimized by CAD, most feature lightweight, low restriction tube and fin construction, with a competition high-speed core and cast aluminum end tanks to give these intercoolers excellent cooling properties with less pressure drop. The design was improved further with flow analyses and simulations. Wagner Tuning competition intercoolers deliver an easy fitment and maximized cooling. They are treated with a protective anti-corrosion coating with perfect thermal heat-dissipating characteristics. Order the model designed for your vehicle application.

5.0 out of 5 stars ( 1 )

$2,490.00

On Sale

Summit Bucks

Mishimoto Performance Radiator Essentials Bundles

Restore and enhance your cooling system with a Mishimoto Performance Radiator Essentials Bundle. The bundles include high-quality upgraded cooling components to replace items Mishimoto found to be the most failure-prone. Kits feature an aluminum radiator, silicone radiator hose kit, high- and low-temperature thermostats—plus other components (depending on the bundle you select). The Performance radiator features full aluminum construction with durable TIG-welded end tanks. In addition, it's designed with a massive two-row 2.2 in. thick core, which provides substantial improvements in cooling efficiency. The radiator hose kit is constructed from four layers of silicone with heat-resistant embedded fibers. This combination of materials provides substantially improved heat and pressure tolerance compared to the stock rubber hoses. In addition, the kit includes a CNC-machined aluminum quick-disconnect fitting, providing a considerable improvement in durability over the stock plastic unit. Rounding out the basic Essentials Bundle is a pair of thermostat sets; high-temperature thermostats hasten engine warmup, making it ideal for use in cold climates. The low-temperature thermostats have a lower activation temperature compared to the factory thermostat. Lower activation temperature allows coolant to flow through the engine earlier, reducing the risk of overheating in hot environments. Order the bundle with components preferred for your vehicle.

Not Yet Reviewed

$2,491.95

Trail-Gear Hydraulic Steering Kits

Building a fully hydraulic steering system can be quite a project. Thankfully, Trail-Gear has taken all of the guesswork out of the process with these complete, user-friendly hydraulic steering kits! Everything you will need is included, such as mounting brackets specifically designed for Toyota apps. The steering pump has an all-steel housing and emits 4.5 gpm of flow and 1,650 psi of pressure. Each high-pressure hose is steel-braided with crimped-on ends. These kits are available in 6, 8, and 10 in. ram sizes, and are ideal for use with links and most leaf spring applications. Kits include: * 6, 8, or 10 in. double-ended ram and clevis kit * Orbital (100 ml, 125 ml, or 160 ml) * Full hydraulic steering pump with pulley * Tie rod kit * Double-ended ram mounting kit * Steering column * Orbital mounting kit * Reservoir with filter * Cooler * Power steering belt * Complete hose kit * All necessary hardware

4.0 out of 5 stars ( 4 )

$2,499.99

PSC Jeep JL Big Bore XD Steering Cylinder Assist Kits

PSC has taken the Jeep JL steering system back to the drawing board and engineered their exclusive Jeep JL Big Bore XD steering cylinder assist kits. These kits are engineered to solve the original steering issues, and efficiently handle the increased torque loads on vehicles equipped with any combination of 37 in. or larger tire sizes, upgraded aftermarket axles, or differential lockers. Features and benefits of upgrade kit include: * Increased torque output * Relieves stress on steering gearbox and frame mounts * Steering assist cylinder acts as a dynamic steering stabilizer

Not Yet Reviewed

$3,590.00

—

$3,933.00

On Sale

NOS Cryogenic Refill Pump Stations

NOS cryogenic refill stations are designed for performance retailers in the business of refilling nitrous bottles, or racers who use a substantial amount of nitrous oxide. They're safe, easy, and quick. The stations come complete with the plumbing, hoses, gauges, valves, fittings, and bottle stand necessary to refill any nitrous bottle. These refill stations will require a compressed air supply (80-100 psi), a mother bottle (through a local gas supplier), a scale, and a water separator/filter (to help lengthen pump service life).

5.0 out of 5 stars ( 4 )

$2,920.95

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.63 out of 5 stars ( 8 )

$2,329.99

On Sale

Holley Sniper 2 EFI 650 HP Inline Pump Fuel Injection Systems with Power Distribution Module

Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected

4.33 out of 5 stars ( 21 )

$2,399.95

—

$2,609.95

$2,158.95

—

$2,347.95

On Sale

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.22 out of 5 stars ( 91 )

$2,559.95

$2,068.95

—

$3,399.95

QA1 1963-72 C10 Coilover Conversion Systems

Upgrade your classic truck to a modern driving feel and performance with QA1's 1963-1972 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while reducing weight 140 lbs. over stock. Order the QA1 1963-72 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Adjustable Shock Valving: Double-adjustable shocks offer independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 5 )

$4,450.95

—

$4,650.95

On Sale

Holley Ford Mid-Mount Accessory Drive Systems

Holley's mid-mount accessory drives are available for small-block Ford engines. These systems have all accessories pulled in tighter than other accessory drives. At their heart is a "bracket-less" mounting design—the accessories mount directly to a uniquely designed timing cover for a clean, integrated form. This product offers superb engine visibility to show off your engine, not unsightly accessory brackets. The premium alternator utilizes 6-phase technology as found on the C7 Corvette and only requires a one-wire hookup. The water pump cartridge also shares its design efficiencies with that of the C7 Corvette. A compact and reliable SD7 A/C compressor and Type II power steering pump with baffled reservoir are also integrated. This system design provides two heater hose return port locations (upper top and passenger-side low). The mid-mount system comes complete with everything you need: the water pump, A/C compressor, alternator, and power steering pump with reservoir. All pulleys and the belt are supplied, along with heater hose adapters, power steering to-6 AN hardline, and the alternator plug/harness. Color graphical instructions walk you through every step for an easy installation. Systems are available with a natural or black finish. Features and benefits: * Bracket-less accessory mounting integrated with supplied front timing cover assembly means this kit will work on all block deck heights * Water pump inlet pipe mounts for either driver or passenger side lower radiator hose routing; timing cover also has mounting for driver or passenger side ignition timing pointers to accommodate all needs * Two return heater hose ports (upper center and pass-side low) with hose adapter/port plug included for a complete solution * Crankshaft belt pulley configured for 3 or 4-bolt crank dampers; spacer P/Ns 97-446, 97-447, or 97-448 are available for purchase to adjust for different OE crank damper pulley flange depths * Power steering may be deleted with a drivebelt change; see installation instructions for the commonly available drive belt required * A mechanical fuel pump may be used with this kit. See installation instructions for required timing cover mod to be performed; and the power steering pump will need relocation (use kit 97-436); a remote mounted P/S reservoir is also required * C7 LT1 style premium alternator, 150 amp * C7 LT1 style water pump design * Compact SD7 A/C compressor * Type II power steering pump with baffled reservoir * P/S adapter hardline to-6 AN adapter included * OE pulley ratios for optimal accessory performance

Not Yet Reviewed

$2,510.95

—

$2,612.95

$2,258.95

—

$2,350.95

QA1 1973-87 C10 Coilover Conversion Systems

Upgrade your square body Chevy C10's driving feel and performance while getting the perfect stance with QA1's 1973-1987 C10 coilover conversion systems. The kits come with everything you need to convert your C10's front end to coilovers and a tubular crossmember with rack-and-pinion steering. These coilover conversion systems are a great way to overhaul your suspension in one go, giving you adjustable ride height to achieve the perfect stance with up to 8 in. of drop—all while dialing in the ideal ride quality and performance for your application while also reducing weight 140 lbs. over stock. Order the QA1 1973-87 C10 coilover conversion system recommended for your year/make and model vehicle. Product features and details: * Powered rack-and-pinion offers quicker steering and a tighter feel. Plus, increase steering angle when fitting larger wheels and tires, and improve geometry for enhanced drivability * Increased Ground Clearance: The crossmember and control arms make your undercab rails the truck's lowest point—new upper shock mounts increase travel for a great ride and performance, even at low ride heights * Single or double-adjustable shock valving offers independent rebound and compression tunability—great for trucks that will see track time or drivers who really want to dial in ride quality on the street * Easy, Bolt-In Installation: The crossmember comes powder coated and ready to install—no need to cut or weld your frame—it easily locates the steering rack, and you can choose mounts (sold separately) for common engines * Modular Engine Mounts: Choose from modular engine mounts (sold separately) that allow you to reuse your existing transmission mount and driveshaft (kits are available for small block Chevy, big block Chevy and LS applications—DIY mounts are also available if you want to customize the location of your engine * Front Sway Bar: The optional front sway bar (sold separately) adds even more cornering capabilities—it reduces body roll and keeps your tires planted to give you more grip in the turns Fitment Notes: * If you already have QA1's coil-over system, you can find retrofit kits to use your existing components * Total drop range depends on wheel/tire fitment * Will require you to trim inner fenders * Engine mounts are year-range specific to maintain OE bellhousing location * Optimized bump steer settings require at least 18 in. wheels -- 18 in. wheels can run up to 6 in. of backspacing -- 20 in. wheels can run up to 7 in. of backspacing * Requires use of 1973-1987 C10 spindles * May require different headers and oil pan (Stock SBC and BBC pans fit) * Steering shaft is not included * May require new power steering hoses depending on fittings, pump, and engine placement

5.0 out of 5 stars ( 1 )

$4,450.95

—

$4,650.95

141 Results Found For "hose"