Free Shipping on Orders Over $109 at Summit Racing

Derale PWM Electric Fan Powerpacks

Get complete control of your engine temperature! Derale PWM electric fan Powerpacks have integrated their high-performing PWM fan controllers into the fan units. The PWM fan controller features built-in soft start technology and utilizes pulse width modulation to constantly adjust electric fan speeds from 0-100%. This maintains the optimal engine operating temperature while allowing the fans to operate at the percentage needed, instead of 100% all the time. By using the fans at the percentage needed component life is increased and amperage spikes are eliminated. The Powerpacks use high output electric fans incorporated into precision engineered shrouds. The Derale Performance Powerpacks are available with single or dual fans and can conquer the most difficult cooling conditions.

4.12 out of 5 stars ( 33 )

$2,027.99

Flaming River Microsteer Electric Power Assisted Steering Kits

Flaming River Microsteer electric power assisted steering kits can easily be fitted to virtually any vehicle where manual steering currently exists. There's no need to change your steering rack or fit a hydraulic system. These kits allow you to adjust the amount of assistance by using a rotary potentiometer—or you can make the system speed sensitive by connecting a wheel speed signal to the tuning box. A mode selection switch on the box allows you to choose your preferred method—manual or wheel speed. Flip the switch and make your vehicle easier to steer or boost the horsepower a bit with a Flaming River Microsteer electric power assisted steering kit. Items and notes: * Motor/gearbox unit (MGU) * Electronic control unit (ECU) * Tuning box * Wiring harness * 11/16 in.-36 input and output shafts

3.67 out of 5 stars ( 3 )

$2,189.99

—

$2,589.99

Derale Electric Fan Brushless Powerpacks

Get complete control of your engine temperature! Derale has combined their high-performing shrouded brushless Powerpacks with the ultimate fan controller. Using a brushless electric fan incorporated into an engineered shroud, this Powerpack can conquer even the most difficult cooling conditions. The PWM fan controller comes with built-in soft start technology. The controller utilizes Pulse Width Modulation to constantly adjust electric fan speeds from 0-100%, to maintain 185°F temperature. No more reacting to the engine temps, you can control it! This allows the 17" brushless electric fan to operate at the percentage needed, instead of 100% all the time, therefore increasing component life and eliminating amperage spikes.

Not Yet Reviewed

$2,027.99

EPAS Performance Electric Power Steering Kits

EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns

3.83 out of 5 stars ( 23 )

$2,126.99

—

$2,702.99

On Sale

AEM Electronics EV Combined Charging Units

AEM Electronics EV combined charging units (CCU) simplify the electric vehicle (EV) drive system. The units merge an on-board charger (OBC) and a DC-DC converter (DCDC). The OBC charges the HV battery pack by taking 120 V or 240 V AC energy from the grid, converting it to high-voltage DC and charging the high-voltage battery in the vehicle. The DC-DC converter takes the high-voltage from the battery pack and converts it to low-voltage to maintain the charge in the vehicle's 12 V battery, and performs the duties that the alternator does in an internal combustion engine (ICE) vehicle. The combined charging units are fully controlled by the VCU via the CANbus and the OBC and DC-DC report voltage, current, and status information back to the VCU. The AEM EV CCUs are very compact and lightweight, while offering high efficiency, stable charging, long life, a high-protection level, and high reliability. They are 100 percent driven via CAN by the VCU in conjunction with the BMS-18, and is not directly controlled by the charge plug connector or the off vehicle EVSE (Electrical Vehicle Service Equipment). Features: * 6.6kw (32 amps) on-board charger + 2.5kw DC-DC converter * 350 Vdc nominal output and up to 450 Vdc maximum * Plug-and-play with AEM's EV controls * Liquid cooled and temperature controlled for efficient thermal management * Lightweight (5.5kg, 12 lbs.) compared to typical units at 18 to 24 lbs. * Compact design--2.5 to 3x smaller than comparable units * The HV battery charger is rated at 93.5 percent efficiency at full load * The DC-DC LV output is rated at 91.5 percent efficiency at full load with a maximum continuous DC-DC output of 178 amps at 14 V * The CCU has the following protection functions: -- Input over and under voltage protection -- High-voltage output over and under voltage protection -- High- and low-voltage output short circuit protection -- Over temperature protection

Not Yet Reviewed

$2,817.95

$2,535.95

Scott Drake 1964-73 Mustang Electric High Pressure Brake Master Cylinders

Scott Drake 1964-73 Mustang electric high-pressure brake master cylinders are for muscle car owners with special brake needs. Lack of space because of a big motor, lack of vacuum caused by big cams, blown or supercharged engines, or are you just looking for a superior looking unit that does not hang out so far from the firewall? These polished aluminum master cylinders are unique self-contained boosters not dependent on engine vacuum or a booster steering pump, yet capable of generating up to 2,500 lbs. of line pressure. They feature a larger bore than most cylinders, so they can handle single or multi-piston calipers, but still give you a solid pedal.

1.0 out of 5 stars ( 1 )

$2,202.95

JET Trademaster 1/2 Ton Electric Hoists

JET Trademaster Series 1/2-Ton electric hoists combine safety, portability, and durability to operate in all your industrial, construction, and transportation applications, making one-person jobs possible by offering precise, variable-speed control via a wireless remote, reducing strain, and enabling work in tight spaces. Key features like the brushless motor, overload protection, and a compact design enhance durability and operator safety, minimizing manual effort and helping prevent accidents. Product features: * Comes standard with Wireless Controller that can infinitely adjust speed from creep to 4 ft./min. with speed dial and max of 41 ft./min. in high-speed * TAA Approved * Single-phase 120 V plug enables use in all areas, and the Permanent Magnet Brushless Motor has the lowest required starting current available at just 10 amp * Overload protection using slip clutch system to protect hoist from loads overrated capacities * DC Brushless motor designed for a longer lifespan than normal Electric Hoist motors reducing maintenance costs * 30 / 7.5 Time ratings * Electronic controls have protections on them with ten failure codes that are shown on wireless pendant for troubleshooting * Low noise at less than 75 dBA * 1/8-to-1/2-Ton models come in plastic carry case for ease of transport from job-to-job

Not Yet Reviewed

$4,707.99

Pace Edwards BedLocker Electric Retractable Tonneau Covers

Pace Edwards BedLocker electric retractable tonneau covers feature a flush-mounted design and a textured black finish for tremendous strength, security, durability, and style. Operated via remote control, they open and close at the touch of a button in less than 30 seconds, and can be stopped at any point. With their drop-in, clamp-in design, these systems require no drilling on most applications, and install in less than one hour. Packed with value-added features, the BedLocker's patented silicone rubber hinge seal will not allow water to penetrate the retractable blanket. The covers are equipped with a motor drive for ultimate performance and reliability. Other features: * Hard tonneau cover retracts into canister at the front of the truck bed * Electromagnetic brake locks the cover in any position * Low-profile, aerodynamic design increases fuel economy by up to 11 percent * Fits over fifth-wheel trailer hitches * Tonneau comes with WeatherGate tailgate seal

4.8 out of 5 stars ( 5 )

$2,776.00

—

$3,033.00

iDEAL Equipment Electric/Hydraulic UTV Lift Benches

Designed to fit the largest UTVs, iDEAL Equipment electric/hydraulic UTV lift benches feature a 2,200 lbs. capacity, along with a 65 in. x 88.6 in. platform. Featuring newly designed drive on pivot ramps that fold down and out of the way to become wheel stops. While an innovative retractable center ramp slides out of the way making for a safe, unobstructed workspace. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV lift benches UTV side extensions incorporate innovative center drop panels providing unmatched service access, including motorcycle service, without removing the extensions. A single point hand-held pendant controls raising or lowering the bench, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 65 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,920.00

iDEAL Equipment Electric/Hydraulic Motorcycle Lift Benches

iDEAL Equipment electric/hydraulic motorcycle lift benches feature a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises. Keeping the safety of the technician in mind, a spring-loaded drop-down panel in the table provides easier access to the rear wheel for service, while a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. L x 31.5 in. W * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$3,770.00

OTC Vanguard 2-Stage Electric Pumps

The OTC Vanguard 2-stage electric pumps are ideal for a wide range of applications including clamping, bending, straightening, pressing, forming, testing, pushing, and pulling. They provide fast ram approach and return with a low-pressure, high-volume stage, and then automatically switch to a high-pressure, low-volume stage for high force requirements. This design allows for efficient performance in various hydraulic applications. These pumps are designed to be compact and easy to handle, making them convenient for various work environments. Product features: * Built with robust materials for long-lasting performance in demanding conditions * Fast-acting precision-built two-stage pumping unit consisting of a gear pump for the low-pressure stage and an axial-piston pump for the high-pressure stage * Delivers low volume at high-pressure yet provides high-volume at low-pressure for fast cylinder piston approach and return * Suitable for operation up to 10,000 psi * 2-stage hydraulic pump with 2-position/3-way valve * 6 ft. remote motor control

Not Yet Reviewed

$4,708.99

iDEAL Equipment Electric/Hydraulic UTV Frame Lift Benches

Premium products at an affordable price. iDEAL Equipment electric/hydraulic UTV frame lift benches are frame engaging utility and all-terrain vehicle lifts allowing for easy wheel and suspension service. Featuring a 2,500 lbs. lift capacity, along with a 24 in. wide x 88.9 in. long platform, with flip-up extension platforms, and a small lift footprint providing a safe, unobstructed work area. Keeping the safety of the technician in mind, iDEAL Equipment electric/hydraulic UTV frame lift benches come with a portable or fixed pedestal control stand and fully operational control panel, with electro-magnetic lock release, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,500 lbs. * Three locking positions * Platform is 88.9 in. Long x 24 in. wide * 4.75 in. minimum height * 43 in. maximum lift height * Load bearing hinged platform extensions * Four 4.75 in. x 6.5 in. rubber contact lift pads included * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,070.00

EGR RollTrac Electric Tonneau Covers

Get ready for the tonneau cover which has it all. Engineered to rigorous global standards and awarded ten international patents, the EGR RollTrac Electric features best-in-class security and smart technology. The all-aluminum construction provides a hardcore, tough, and stylish solution to your storage requirements. The fully electric EGR RollTrac tonneau covers integrate with your vehicle's remote central locking, features on-board controls, a smart ECU, and a multi-speed gearbox. Built with your lifestyle in mind and tough enough to handle any terrain, these are the ultimate covers you have been looking for. Leave nothing behind. Keep your storage area safe and secure under an EGR RollTrac Electric. Choose the model designed for your truck. Features and benefits: * Combines practicality with style * Advanced water management system keeps truck bed dry * Onboard ECU--equipped with intelligent programming to offer smooth, safe, and variable-speed operation * Integrated buttons on both sides * Remote locking is standard * Anti-pinch to protect cargo and your fingers * Universal T-channel compatible with major rack brands

Not Yet Reviewed

$3,285.00

iDEAL Equipment Electric/Hydraulic ATV Lift Benches

iDEAL Equipment electric/hydraulic ATV lift benches are up to the challenge of lifting all ATVs on the market today. Featuring a new and innovative retractable ramp system, with a pivot approach ramps that fold out of the way as the lift raises and become wheels stops. Keeping the safety of the technician in mind, a single point hand-held pendant controls lift bench functions for raising or lowering the platform, eliminating the need to use hands or feet to disengage manual safety latches. These features limit injury, while saving time and space, making your shop area more productive. Features and benefits: * Available in blue or black powdercoat finish * Lifting capacity 2,200 lbs. * Six locking positions * Extended length of 27.5 in. with full width approach ramp * Wheel stop * Overall length is 116.5 in. long, fully lowered * Platform is 88.6 in. Long x 50 in. wide * Maximum lift height 47.2 in. * 110 V integrated electric/hydraulic power unit

Not Yet Reviewed

$4,410.00

AutoMeter Heavy-Duty Automated Electrical System Analyzers

AutoMeter heavy-duty automated electrical system analyzers work on most 6 V and 12 V batteries, including AGM, battery banks (up to 4 batteries), and 24 V systems. Due to their 400 amp true load system, they can apply a load through the tester for quick readings on the alternator, battery, starter, connections, and wiring. The testers feature Digital Pulse Load technology, allowing operators to quickly evaluate cranking power—as well as V-drop technology, which measures voltage drop associated with starter engagement. This product also connects to AutoMeter's truck/trailer adapters (available separately) to quickly assess all electrical issues. They run on their own 6 V SLA battery which recharges internally whenever the cables are hooked to a battery.

Not Yet Reviewed

$3,662.99

On Sale

Holley Dominator EFI Vehicle Management Systems

Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential

4.17 out of 5 stars ( 6 )

$2,399.95

—

$3,499.95

$2,158.95

—

$3,148.95

On Sale

Holley Terminator X MAX Engine Management Systems

Holley Terminator X MAX engine management systems let you take control of your domestic V8 engine. They give you complete charge of your engine and self-learning fuel strategies, along with the proven, race-winning technology of Holley EFI—all at a budget-friendly price! Every MPFI Terminator X MAX features real-time fuel learn, high-impedance injector drivers, an integrated one-bar MAP sensor—and four programmable inputs and outputs, ideal for electric fans, boost control solenoids, progressive nitrous control, and much more. Also, Holley offers the X MAX systems with either or both drive-by-wire (DBW) throttle body control or transmission control. All kits come fully loaded with base maps for common domestic V8 engine combinations to get you out of the garage and onto the road or track fast. Order the model recommended for your vehicle application. Features include: * Holley EFI industry-leading, easy-to-use software suite allows full laptop access for advanced users * Real-time fuel map learn—takes the guesswork out of tuning your base fuel table * High-impedance injector drivers will safely power most standard injectors and Holley EFI injectors (will not control low-impedance injectors) * Bosch LSU 4.9 wideband relays AFR information to the ECU for accurate reading and precise tuning control * On-board one-bar MAP sensor is perfect for N/A or nitrous engine combos * MAP sensor vacuum hose adapters * 4 inputs: 12 V, ground, 5 V, and frequency * 4 outputs: Ground, PWM, and for accessories * Boost control: boost vs. time, boost vs. gear, boost vs. rpm, boost vs. speed, and boost safeties * Nitrous control: single channel of wet or dry, progressive or non-progressive, rich/lean safeties, and target closed loop AFR; adjustable through touch screen * Advanced tables can be used for any custom tables * On-board diagnostic LEDs allow you to identify any critical engine issues at a glance * The compact ECU size allows you to mount it virtually anywhere. Remember, diagnostic LEDs must face up! * Plug-and-play compatible with more Holley EFI accessories * Available with or without a 3.5 in. touch screen LCD hand-held with easy-to-use calibration wizard; allows you to quickly build a base tune for most V8 engines, as well as tuning and gauge display functions

4.22 out of 5 stars ( 91 )

$2,559.95

$2,068.95

—

$3,399.95

Chevrolet Performance 480 HP LS3 Engine Controller Kits

Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.

5.0 out of 5 stars ( 1 )

$2,202.68

Ford Performance Parts 2021-23 Coyote 5.0L Control Packs

Take the complexity out of wiring your Gen 4X 5.0L Coyote crate engine with a Ford Performance Parts control pack. Ford Performance Parts 2021-23 Coyote 5.0L control packs are available to run the crate engine with a Mustang 10R80 automatic transmission or a manual transmission. Choose the control pack needed for your build. Control packs feature: * PCM with unique Ford Performance calibration * Electronic throttle pedal eliminating cable routing issues * Unique harness replaces the stock body harness and is designed for custom vehicle installation * OBD-II port for trouble-shooting/code reading * Power distribution module, air box, air inlet tube, upper and lower radiator hoses, and HEGO sensors are included * Requires return-type fuel system

5.0 out of 5 stars ( 1 )

$2,462.99

On Sale

MSD Pro 600 CDI Ignition and High-Output Coil Kits

When you're making extreme cylinder pressure with boost or nitrous on an inductive coil-per-plug ignition, lack of spark energy means you're leaving horsepower on the table. MSD Pro 600 CDI ignition kits with high-output coils answer this need. The Pro 600 CDI ignitions provide unrivaled spark energy and dependability. They have built-in protection for accidental reverse battery connection, over temperature protection, and LED diagnostics that can identify an issue with individual coils should a problem arise. They also feature a programmable power setting to allow racers to switch between 250 to 400 millijoule outputs, or the industry-leading output of 680 millijoules via an activation wire or software, meaning that you can turn it down for the long haul and then set it to kill mode at the strip, making the Pro 600 ideal for a Drag Week-style car and really any no-compromise vehicle. Perfectly complementing the Pro 600 ignition box in these MSD kits are high-output 8280 ignition coils, replacing the extremely capable 8232 coils used in the 8-channel capacitive discharge ignition kits. Available in red or black, the 8280 coils have the goods to back up their aesthetics with increased peak spark current, overall spark energy, and greater thermal efficiency. Designed for coil-near-plug engine management systems, the PRO 600 is also capable of easily converting any distributor-type ignition into a coil-near-plug system. Additional features and specifications: * Eight outputs of up to 680 millijoules of energy * All necessary wiring harnesses included * Continuous 600 millijoules operation without risk of failure from overheating * High-efficiency Alternating Current (AC) power delivery means less voltage draw from your battery or charging system * Over 50 kV output voltage when used with MSD suggested coils * Spark duration of greater than 300 microseconds * 6 V minimum required for starting and running * 12 V minimum required for 600 millijoules operation * Maximum operating voltage of 22 V * Direct plug-in to Holley EFI systems * Compatible with most EFI systems, including 5 V or 12 V drivers * Plug-in interface with MSD Power-Grid, Davis Profiler, and OEM LS-style coil harness * Diagnostic LEDs help troubleshoot issues should they arise * On-the-fly power output selection wire, selectable between low power and high power * Fits most coil-per-plug engines up to eight cylinders (including four and six cylinders) * Approved for NHRA Pro Mod Class

Not Yet Reviewed

$2,561.95

$2,304.95

Ford Performance Parts 2018-20 Gen 3 Coyote Control Packs

Ford Performance Parts 2018-20 Gen 3 Coyote control packs are designed to run 2018-20 5.0L Mustang GT Coyote (Gen 3) automatic transmission engines with 10R80 Mustang GT 10-speed transmissions. They include a unique control pack harness, which replaces the stock body harness. These Ford Performance control packs were designed for performance enthusiasts who want the Gen 3 Coyote package in their own custom build. Includes: * PCM with Ford Performance calibration (requires return-type fuel system; not compatible with return-less-type) * Electronic throttle control accelerator pedal, eliminating throttle cable routing problems * OBD-II diagnostic port to assist in vehicle calibration upload and problem diagnosis * Power distribution module * Mustang GT air box * Mustang GT air inlet tube * MAF sensor * Upper and lower radiator hoses * HEGO sensors

Not Yet Reviewed

$2,201.99

On Sale

Racepak IQ3D Drag Dash Bracket Bundles

Looking for a complete monitoring package? Racepak IQ3D Drag Dash bracket bundles combine their popular IQ3 Drag logger dash with the most common V-Net sensors and V-Net extension cable to meet the needs of today's bracket racers. They are compatible with a long list of ECU systems. Racepak bracket bundles include: * IQ3D Drag Dash * Wiring harness (includes 2 programming buttons) * Driveshaft sensor (Note: driveshaft collar sold separately) * Oil pressure sensor * Water temperature sensor * Carburetor fuel pressure sensor and V-Net module * Transmission temperature sensor and V-Net module * 6 ft. V-Net cable * USB programming cable * Racepak Datalink II software * MicroSD card and reader

5.0 out of 5 stars ( 2 )

$2,407.95

$2,166.95

Ford Performance Parts WARN Super-Duty Winch Kits

The Ford Performance by WARN Super-Duty winch kit was co-developed by Ford and WARN engineers to create a winch solution for the 2020-22 Super Duty that offers an OEM level of fit, finish, durability, and vehicle integration. These kits include: * Unique WARN 12,000 lb. winch * 70 ft. synthetic winch line * 12,000 lb. Epic winch hook * Ford Performance-branded blue hook strap * Wireless and wired remote controls * Required bracketry and hardware

5.0 out of 5 stars ( 2 )

$2,926.99

Holley Terminator X Max GM Gen V LT Direct Injection Kits

Ready for standalone engine management at a budget price? Take control of your GM Gen V LT1, L83, or L86 engine with a Holley Terminator X Max GM Gen V LT direct injection kit! They're available to fit early non-WT drive-by-wire engines, as well as late WT drive-by-wire engines. Terminator X and X Max features and benefits: * Plug-and-play GM Gen V LT engine control, including GDI and VVT support * Ideal for swapping late model GM Gen V LT engines into vintage vehicles * 3.5 in. hand-held gets your engine running in no time with a step-by-step calibration wizard * GM LS and LT drive-by wire throttle body control (Terminator X Max only) * GM 4L60 and 4L80 transmission control (Terminator X Max only) * Included engine harness plugs directly into the factory LT DI injector sub harness * OEM Injectors supported, with part numbers provided in the handheld wizard or software * Genuine Bosch LSU 4.9 wideband control (will not work with LSU 4.2 oxygen sensors) * On-Board Diagnostic LEDS for: ECU Power – Engine Run – Wideband Status – TPS Calibration – Crank Signal – Cam Signal – VVT Status – Pump Control – and DI Injectors. This allows you to identify any critical engine issues at a glance * Built-in 1 bar MAP sensor, vacuum hose adapters included (1/8th, 1/4 and 3/16ths); or for Boosted applications, you can disable the internal MAP sensor, and utilize an external LT MAP sensor. The harness comes with the connector terminated, making the installation a snap * 4 inputs: 12 V, Ground, 5 V, and Frequency—for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure inputs are pre-terminated) * 4 Outputs: -- Ground -- PWM – for accessories such as fans, boost control, nitrous control, IAC kit, and more -- Boost Control – Boost vs Time, Boost vs Gear, Boost vs RPM, Boost vs Speed, Boost Safeties -- Nitrous Control – Single Channel of Wet or Dry, Progressive or Non-Progressive, Rich/Lean Safeties, and target Closed Loop AFR * Integrated data logging to the 3.5 in. hand-held SD card * Free EFI tuning software for complete control of your Terminator X powerplant Terminator X Max ECU Connections: * J1A - Main Harness Connector: This connector is primarily an "Input" connector. It contains all the sensor inputs and wide band oxygen sensor control. * J1B - Main Harness Connector: The second connector is the "J1B" connector (26 pin). This connector is the "output" connector. It has eight injector outputs and outputs for other devices. * MAP Sensor: Used on N/A applications, connect directly to full manifold vacuum port on the intake manifold. * Main Power: Connects to the Main Power Harness; these two wires MUST be wired directly to the battery terminals. * J3: Connection point for the drive-by-wire harness. * J4: Connection point for the transmission harness.

Not Yet Reviewed

$3,149.95

—

$3,649.95

201 Results Found For "electrical"