Availability
RideTech 1959-64 GM B-body coilover suspension systems are specifically designed for the Impala, Bel Air, Biscayne, Brookwood, El Camino, Kingswood, Nomad, and Parkwood. They include everything needed to provide a lowered stance with dramatically improved handling and ride quality. Get the benefit of a complete suspension system that takes all of the guesswork out of your upgrade with a RideTech 1959-64 GM B-body coilover suspension kit. Features, items, and specs: * Tubular upper StrongArms feature corrected ball joint angles and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * Upper ball joint moved back allowing for additional caster settings for improved speed stability and steering feel * Tubular lower StrongArms feature a double-sheer lower mount for increased strength, and are fully assembled with ball joints, injection-molded Delrin bushings and cross shafts; powdercoated satin black * HQ Series coilovers utilize impact-forged aluminum body and monotube design to deliver excellent ride quality and handling; standard 1,000,0001 mile warranty included * Rebound knob located at top of shock for under hood access; allows fine-tuning of ride quality and handling * Hyperco springs provide consistent spring rate that will last a lifetime * Rear StrongArms provide added strength; utilize R-joint technology to provide smooth operation and reduce roll bind * Lower arms feature a double-sheer mount for coilovers, locating them in place of the stock springs and keeping load where it belongs. * Adjustable panhard bar allows axle to be centered at new ride height * Front and rear MuscleBars replace tiny factory sway bars, where applicable; they feature significantly higher rates, performance end links, and Delrin-lined bushings
( 1 )
$5,145.00
RideTech 1978-88 GM G-body coilover suspension systems include everything needed to provide modern drivability for your classic muscle. The rear StrongArm R-joint rod ends combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing. RideTech 1978-88 GM G-body coilover suspension systems are as comfortable on the street as they are on the racetrack! Features, items, and specs: * Upper StrongArms feature tall ball joints for increased camber gain * Upper ball joints have been moved back to allow for additional caster setting (improves high speed stability and steering feel; offset slugs available for additional caster) * Injection-molded Delrin bushings with 13 percent PTFE used to reduce deflection and stiction * Lower StrongArms feature a double-sheer lower mount for increased strength * Dropped lower shock mount to increase suspension travel * Lower ball joint moved forward to increase caster settings, while keeping the wheel centered in the wheel opening * HQ Series coilovers allow fine-tuning and deliver excellent ride quality and handling with a 1,000,0001 mile warranty (rebound knob located on top of front coilovers for underhood access) * Brackets included with rear coilovers for easy attachment to the frame and the 10/12 bolt rear-end * Front MuscleBar helps reduce body roll and creates room for wider front tires (includes PosiLink end links that provide immediate engagement between chassis and control arms) * Rear MuscleBar * Rear StrongArms provide added strength to help get the power to the pavement
Not Yet Reviewed
$5,420.00
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These stock 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. Ridetech stock housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
Not Yet Reviewed
$2,175.00
If you have chosen a Ridetech 4-link system to improve the ride quality, handling, and braking of your classic muscle car, the next purchase should be a Ridetech Ford 9 in. housing and axle package with integrated 4-link and sway bar brackets. These narrowed 4-link axle assemblies allow for the easiest installation of your 4-link system. The 9 in. Ford housings are great foundations for putting torque to the pavement. They feature a webbed center section, internal gussets, thick wall tubes, and billet steel flanges (new-style Big Bearing/Torino). The pinion is offset 1/2 in. and the axle flange is offset 2 1/2 in. The narrowed axle widths satisfy mini-tub applications. Ridetech narrowed housing and axle packages are offered in two axle lengths and available raw or with a black powdercoat finish. Select the proper length and preferred finish for your project. Features and benefits: * Webbed center section with internal gusseting for added strength * 3 in. diameter, 1/4 in. thick wall tubes * 31-spline heat-treated 1541H custom alloy axles * High-quality Timken tapered bearings on axle as standard * Drain plug and jack pad * High-quality Grade 8 installation hardware--housing studs, T-bolts, nuts, and washers * 3rd member studs are pre-installed and ready to accept a third member
( 1 )
$2,175.00
Transform your Fox Body's handling with a RideTech 1979-93 Mustang Independent Rear Suspension System. It's no secret that independent rear suspensions (IRS) are superior in almost every way over a stick axle. The biggest concerns are cost and ease of installation. This independent rear suspension system replaces the stock live design with tubular upper and lower control arms utilizing custom-made spindles with S550 Mustang hubs. Camber, roll center, and toe angles were also optimized for greatly increased handling. The bolt-in design requires no welding for installation, as the IRS cradle is designed to mount to the rear frame rails and modified factory mounting points. If you want to optimize the rear suspension of your Fox Body Mustang, do it with this highly engineered IRS system so you can hit the track or street with confidence. Key features and benefits: * High-quality, no compromises manufacturing * Durable powdercoat finish for great looks and corrosion resistance * 100 percent bolt-in design requires minimal modifications * Lowers stance approximately 2 inches—reduces center of gravity without adversely affecting suspension geometry * Reduces upsprung weight creates premium ride quality * Low roll center (5 in.)—one degree of camber gain and zero bump steer inspires confident cornering for improved suspension geometry over OE suspension design and much more enjoyable to drive * 50 percent anti-squat provides excellent traction * Delrin control arm bushings eliminate deflection—no wheel hop, and no noise and no lubrication of bushings required * Retains factory track width * Compatible with mini-tubs (cradle attaches to the inside of the frame rails) * Modular design—works with Ridetech coil-overs or ShockWaves (sold separately), HQ and TQ (Triple Adjustable) versions are also available * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance Fitment Information: * Uses S550 (2015+) Mustang differential (not included)—new units can be purchased from Ford Performance, and Takeout units are also available * Uses shortened S550 (2015+) Mustang axles (not included)—standard strength are available from RideTech * Allows direct bolt-on of both stock SN95 Cobra (1999-2004) or S550 (2015+) rear OE or aftermarket brakes via Ridetech caliper brackets. * Works with 1999-2004 Cobra cat-back exhaust * Requires shortened drive shaft and pinion flange to U-joint adapter (use Sonnax part T35-ALFY-09 or T35-ALFY-10) * Works with Ridetech coilovers or Shockwaves, sold separately * Optional adjustable rate rear sway bar is available for additional fine-tuning
Not Yet Reviewed
$4,500.00
RideTech 1967-70 GM B-body coilover suspension systems include everything needed to provide a lowered stance with dramatically improved handling and ride quality. These complete kits contain StrongArms, MuscleBar sway bars, and HQ Series coilovers, removing the guesswork out of purchasing the right components that will deliver the best performance and ride quality. Features include: * Upper StrongArms--powdercoated black and fully assembled with ball joints, bushing, and cross shafts. They feature corrected ball joint angles and the upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. * Lower StrongArms--double sheer lower mount for increased strength. They are powdercoated black and fully assembled with ball joints, bushing, and cross shafts. * HQ Series coilovers--utilize an impact forged aluminum body and monotube design to deliver excellent ride quality and handling. They allow fine-tuning of the ride quality and handling via rebound knob located at the top of the shock for underhood access. * Hyperco springs are used to provide a consistent spring rate that will last a lifetime. * Front MuscleBar helps reduce body roll and includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. * Rear MuscleBar allows for fine tuning by sliding the arm on the bar to increase or decrease rate * Rear StrongArms provide added strength to get power to the pavement. R-Joint technology provides smooth operation and reduced roll bind. Lower is double sheer mount for coilovers, locating them in place of the stock springs. Upper arm and panhard bar are adjustable, allowing axle to be centered and pinion angle to be set.
Not Yet Reviewed
$5,330.00
RideTech TruTurn steering systems resolve poor suspension geometry, bad bump steer, and clearance issues on your early Camaro/Nova front-end. These packages include taller overall spindles to improve camber gain, steering arms designed to correct bump steer, and drag link brackets that bolt to your OEM drag link. They relocate your inner tie rod and minimize bump steer, and their tie rod assemblies are designed to integrate with your new steering arms and center link for a bolt-on system. RideTech also offers upgrade packages with the same components minus the spindles. Choose a "Tru" no-fab steering system for your muscle car. They're available for a variety of cars from the 1960s and '70s
( 6 )
$3,415.00
—
$3,565.00
RideTech 1979-93 Mustang bolt-in SLA (Short-Long-Arm) front suspension systems replace the stock McPherson strut design with a billet aluminum upper control arm, tubular lower arm and spindles with S550 Mustang hubs. The factory strut design offers very little camber gain and poor overall geometry. This design greatly improves negative camber gain, which positions the tire perpendicular to the pavement through the corners without the need for excessive static camber and overly stiff spring rates. Caster, roll center and Ackerman angles were also optimized. These suspension systems are compatible with either Ridetech coilovers or Shockwave air suspension (sold separately). SLA front suspension systems are available in two fitment styles: * To fit STOCK K-Members (except 84-86 SVO) * To fit many AFTERMARKET K-Members, including Maximum Motorsports, Team Z, AJE and UPR Additional product features: * Incorporates an upper control arm to induce much-needed negative camber gain * Caster, roll center, bump steer and Ackerman angles are optimized * Bolt-in frame surrounds create attachment points for the upper control arms and the shocks. This keeps the load on the frame rails for maximum strength and reduced NVH * Upper and lower arms feature Delrin© bushings infused with PTFE to minimize stiction and eliminate the need for lubrication * Spindles include Moog S550 Mustang rear hubs for maximum strength, consistent braking and reduced maintenance * Lower control arm design improves tire clearance and steering angle 30 degrees with up to a 275mm wide tire Fitment: * Uses S550 (15-23) or SN95 (94-04) Mustang brake systems (caliper brackets sold separately) * 17 in. minimum wheel diameter * Compatible with stock and most aftermarket sway bars Specifications: * Negative camber gain: 1.25 degrees/in. * Positive caster: 7-9 degrees * Bump steer: under .050 in. * Lowers ride height: 1-2 in. * 50 lbs. lighter than stock suspension * Stock track width
( 1 )
$3,300.00
—
$3,650.00
RideTech 1965-79 F-100/F-150 IFS suspension systems are bolt-in and super stout. Significantly more rigid and stronger than the original front suspension, kits are available with RideTech tall pin or hub spindles, and each kit is designed so you can install it yourself with hand tools and a little elbow grease. Features, notes, and specs: * Replaces bulky, heavy, poor handling twin I-beam suspension with a substantial H-style design * Bolt-in cradle is super strong and strengthens the front of the truck while providing structural mounts for front control arms * Superb suspension geometry * Control arms are assembled with ball joints and Delrin® bushings for smooth, squeak-free, long-lasting performance * Upper control arm cross shaft allows for easy alignment and use of caster slugs * Adjustable steering stop on lower control arm * Increased camber gain with tall spindle, 5 to 8 degrees of caster for improved high-speed stability * Motor mount "loops" connect cradle to frame rails to reinforce frame * Front sway bar measures 1.5 in. x .250 in. wall and provides confident cornering and smooth ride * Adjustable bump stops * Rack and pinion steering conversion with 15.5 in. center-to-center bushing mounts for 79 to 93 Mustang-style steering rack * Billet adjustable tie rods * Bump steer has been virtually eliminated * High-quality satin black powdercoat finish * Entire system saves approximately 130 lbs. from front of the truck
Not Yet Reviewed
$3,995.00
—
$4,315.00
What are some of the virtues of a quality RideTech StreetGrip suspension system? For starters, they're easy to install. The Delrin bushings eliminate deflection, and dual-rate springs allow the vehicle to transition small road irregularities via a compliant spring rate. Adjustable monotube shocks deliver premium ride quality and handling performance, while the tall upper ball joints reposition the control arms to correct camber for more stability. Sway bar end links are also included to minimize body roll through corners. Give your vehicle the components it needs to handle the road with a StreetGrip suspension system—RideTech's one-box solution for better ride and control. Order the model designed for fitment on your vehicle.
( 1 )
$2,990.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
