Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Special Offer
Nitrous Outlet Nitrous Oxide Plate Systems
Nitrous Outlet nitrous oxide plate systems come out of the box ready to deliver superior atomization. They spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max flow 400 hp * 400+ hp solenoids * Anodized black aluminum plate and bottle (if included) * Wide-open throttle activation switch * Hardware, electric, and jetting included * E85 compatible with different jetting * Jetting included for 50 to 200 hp
( 3 )
$2,037.99
—
$3,604.99
Nitrous Outlet 4150 GENIII Hornet Dual-Stage Nitrous Oxide Plate Systems
Nitrous Outlet 4150 GENIII Hornet dual-stage nitrous oxide plate systems are the big buzz in performance! The CNC-machined billet aluminum Hornet plates have the largest "stingers" with 16 discharge ports—8 for nitrous and 8 for fuel—that will extend deep inside your intake's throat, spraying a 360 degree pattern. This will completely saturate the air intake charge for precise atomization. GENIII dual-stage systems come with Y-fittings to connect both stages and jetting for horsepower settings from 100 to 700 hp, as well as two nitrous and two fuel solenoids capable of flowing up to 800+ hp. The systems also include anodized aluminum "Boomerang" brackets and pre-bent hard lines for a clean professional look that matches their performance. Inject your vehicle with a Nitrous Outlet 4150 GENIII Hornet dual-stage nitrous oxide plate system. Features include: * Revolutionary GENIII design * Dual-entry * Extended reach cone * Fits single-plane 4150 flange intake manifolds—carbureted or EFI * 360 degree discharge pattern * Unmatched atomization precision * Anodized billet aluminum plate * Hard lines, bracket, gasket, jetting, hardware, and electrical included * E85 compatible (with different jetting) * Jetting included for 100 to 700 hp Notes: * Gen III Hornet plates are a directional plate design and must be installed with the fuel solenoid towards the front and the nitrous solenoid to back of the vehicle. Failure to do so will result in poor nitrous/fuel distribution and could result in engine damage. * Check clearance for distributor and throttle cable linkage.
Not Yet Reviewed
$2,169.99
—
$3,319.99
Special Offer
Nitrous Outlet Holley Hi-Ram Nitrous Spacer Plate Systems
For higher horsepower levels, proper nitrous flow into the airstream is critical for even cylinder to cylinder distribution. Holley Hi-Ram nitrous spacer plate systems are equipped with nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. The spacer plates are available in single and dual stage kits, complete with everything you need to spray up to 300 hp. (With additional jetting, the single stage can spray up to 400 hp, and the dual stage can spray up to 800 hp.) They include all electrical, hardware, gasket, brackets, and jetting for 50-100-150-200-250-300 hp.
Not Yet Reviewed
$2,032.99
—
$3,762.99
Special Offer
Nitrous Outlet Hardline Nitrous Oxide Plate Systems
Nitrous Outlet nitrous oxide hardline plate systems arrive out of the box ready to deliver superior atomization. These systems come with a hardline from the solenoids. Like the softline systems, they spray up to 200 hp, but are capable of flowing up to 400 hp with additional jetting and a -6 AN main feed line upgrade. You'll get race-proven performance from the unique 6-port discharge design, guaranteeing the perfect mixture of fuel to nitrous. Overview: * Max-flow 400 hp billet aluminum plate * Wide-open throttle activation switch * Black powdercoated aluminum or steel bottle with bracket (included in some packages) * Hardware, hardlines, electric, and jetting included * E85-compatible with different jetting * Jetting included for 50-100-150-200 hp
Not Yet Reviewed
$2,474.99
—
$2,638.99
Nitrous Outlet Snake Style Intercooler Chiller Systems
Nitrous Outlet Snake-style intercooler chiller systems enable you to fine-tune the amount of nitrous/C02 discharge to the intercooler. Their aluminum snake-like design allows for the best discharge coverage—and increases power by decreasing intake air temperatures, allowing you to safely produce more boost. The intercooler systems include stainless steel quick-release bottle brackets, with or without your choice of bottles, with high-flow valves and dual accessory ports. They also include a nitrous solenoid rated to 500 hp, 20 ft. of -4 AN stainless steel braided main feed line, tuning jets, a relay and harness, electrical wires, and hardware.
Not Yet Reviewed
$2,137.99
Nitrous Outlet 4500 GENIII Dual-Stage Hornet Plate Systems
What's the buzz word in motorsports? It's nitrous! So, if you like to go fast—get on board with Nitrous Outlet 4500 GENIII Dual-Stage Hornet plate systems! The CNC-machined billet aluminum Hornet plates are equipped with a unique, large, cone shaped "stinger" that protrudes from the bottom portion of the plate into the center of the intake throat. Each stinger has 16 discharge ports, 8 for nitrous and 8 for fuel. The 16 atomized plumes of nitrous and fuel exit from the center of the stinger into the intake plenum in a 360 degree pattern, completely saturating the air intake charge as it enters the intake plenum for even distribution and precise atomization. GENIII dual-stage systems include Y-fittings to connect both stages and jetting for horsepower settings from 100 to up to 800 hp (depending on kit), as well as the nitrous and fuel solenoids capable of flowing up to 800+ hp. Nitrous Outlet offers these nitrous systems with or without nitrous bottles/brackets. Features include: * Revolutionary GENIII design * Dual-entry * Extended reach cone * Fits single-plane 4500 flange intake manifolds—carbureted or EFI * 360 degree discharge pattern * Unmatched atomization precision * Anodized billet aluminum plate * Hard lines, bracket, gasket, jetting, hardware, and electrical included * E85 compatible (with different jetting) * Nitrous bottle size options available Notes: * Gen III Hornet plates are a directional plate design and must be installed with the fuel solenoid towards the front and the nitrous solenoid to back of the vehicle. Failure to do so will result in poor nitrous/fuel distribution and could result in engine damage. * Check clearance for distributor and throttle cable linkage.
Not Yet Reviewed
$2,078.99
—
$3,308.99
Nitrous Outlet Single Nozzle Dry Nitrous Systems
Nitrous Outlet diesel nitrous single nozzle dry systems are available for both gasoline and diesel fuel setups. Most feature a boost activation switch that you can set between 1.5 and 20 lbs. This will allow you to control when the nitrous system is activated and spray up to 500 hp with additional jetting. These kits include everything you need to safely and easily install a dry nitrous system on your vehicle, such as hardware, electrical, jetting solenoid, lines, and more. They come with jetting for 35-50-75-100-150-200 hp.
Not Yet Reviewed
$2,134.99
—
$2,194.99
Nitrous Outlet Direct Port Nitrous Systems
Nitrous Outlet direct port nitrous systems are designed to be high-flowing for high-horsepower applications. These systems come with one nozzle per cylinder—capable of flowing 200 hp each—providing the most dependable way to ensure equal distribution of nitrous and fuel in each cylinder. The direct port systems are fully customizable, letting you personalize a nitrous setup based on your fuel type, fuel pressure, nozzle type, bottle size, and solenoids. If you need a high-horsepower nitrous application for your vehicle, you've come to the right place. Nitrous Outlet direct port nitrous systems will give you everything you can handle. Nitrous Outlet direct port nitrous systems are available with the following features: * Flow up to 800 hp * Work with 4, 6 and 8-cylinder motors * Available in wet or dry systems * Distribution blocks and injection rails * Dual and single stages * Jetting for 50, 100, 150, 200 and 250 HP * Include all hardware, fittings, and accessories
Not Yet Reviewed
$2,198.99
—
$3,341.99
