Availability
Dakota digital external GPS antennas are designed for use with the GPS speed sender. They plug directly into the optional port on the sender and—when combined with the sender—will send signals back to your VFD3 or VHX instrument system.
( 24 )
$28.50
Your vehicles computer is designed to track the speed based on your stock tire height. When upgrading to larger tires, there will be a discrepancy between your actual speed and the readout on your speedometer. Rough Country speedometer calibration devices are easy to use to help you quickly reprogram your vehicles speedometer to match the output of your larger tires. These plug-and-play devices connect directly to your vehicle's diagnostic link connector port and in just a few short minutes your speedometer reads true again. Plus, they not only change your in-dash readout, but they also update your vehicles ECM, ensuring accurate shift points and proper electronic stability control. Finally, you can get an affordable and accurate speedometer calibration with an easy and intuitive setup process, thanks to Rough Country. Choose the device designed for your vehicle.
Not Yet Reviewed
$39.95
On Sale
B&M speedometer port plugs are used to block the mechanical speedometer gear port when upgrading to an electronic speedometer and keep contaminants from getting in your transmission. They feature a black Mil-Spec anodized finish for long lasting good looks, even in harsh conditions. B&M speedometer port plugs come with installation instructions for an easy and quick installation.
( 28 )
$36.74
$32.03
—
$47.25
ICT Billet speedometer delete plugs are used to block the mechanical speedometer gear port when upgrading to an electronic speedometer and keep contaminants from getting in your transmission.
( 13 )
$22.99
—
$36.99
If you're using a mechanical speedometer cable, you'll need to cover the port with a plug. Bowler Performance transmission speedometer plugs will block off the mechanical speedometer port opening on Tremec TKX, TKO, 3550, Borg Warner T-45, Ford T-5, and the T-56 Magnum transmissions. If you're running an electronic speedometer, this is a must-have. These high-quality plugs are machined from billet aluminum. An O-ring is also included to prevent fluid leaks. (Does not include bolt.)
( 3 )
$41.99
The need for speed is often accompanied by a demand for accurate feedback. In fact, a speedometer at times becomes the most important gauge on the dash panel. If your system is malfunctioning or you prefer an upgrade in data precision, Dakota Digital electronic sending units deliver clean, sharp signals from your transmission to the speedometer. Some replacement kits process 8K pulses per mile, and others 16K, for instance--you choose the application and attachment style that's best for your particular vehicle.
( 67 )
$41.80
—
$47.50
On Sale
Intellitronix speedometer sending units provide high-accuracy readouts and are offered in different model types to fit your specific transmission sending unit connection. Select the speedometer sending unit to fit your application.
( 23 )
$57.82
$52.04
On Sale
Manufacturer Rebate
Get connected to your Spek-Pro gauges with AutoMeter speedometer/tachometer wiring harnesses. Most speedos and tachs include harnesses, but when you need new wiring, AutoMeter will get you hooked up with the right connections. Many are plug-and-play to make your installation easier and more reliable. Stay wired for performance and keep critical data flowing with AutoMeter Spek-Pro speedometer/tachometer wiring harnesses.
Not Yet Reviewed
$45.99
$41.39
These Dakota Digital speedometer sensor harnesses are designed for electronic digital speedometers. They were designed to fit all of the GM 700R4 transmissions. Dakota Digital has manufactured the highest quality instruments and specialty electronics for over 25 years. If you're looking for a digital speedometer sensor harness, Dakota Digital has what you need.
( 2 )
$38.00
On Sale
Use a New Vintage USA speedometer sender to convert your mechanical speedometer takeoff or your electronic sensor-style speedometer output to an electronic pulse output. These speedometer senders are designed for use with custom installations, early model transmission applications, and all Marshall electronic speedometers.
( 15 )
$39.95
$35.96
Caspers Electronics VSS splitters are harnesses that can be used when you need access to the VSS signal for more than one device. For example, if you have an external speedometer or trans controller and need to retain the VSS signal necessary for computer control. Casper VSS splitters are available in two models for older or typical GM vehicles, and both are completely sealed with simple plug-and-play operation. There is approximately 3 in. of wire between connectors. Select the one needed for your vehicle.
Not Yet Reviewed
$34.79
On Sale
FTI Performance Automatic Transmission reluctor rings simplify the installation of an electronic speedometer. Their installation provides you many more choices when selecting a speedometer for your street or race car.
Not Yet Reviewed
$39.99
$35.99
On Sale
Crown Automotive vehicle speed sensors are used by many electronic and transmission systems to ensure correct vehicle operation. The small units convey information to your on-board computer about how fast the engine is spinning at any particular moment—which could affect the performance of the transmission, speedometer, ABS, power steering, or cruise control. Like many engine components, speed sensors can eventually malfunction through years of use. If your car, truck, or van develops a faulty sensor, Crown stocks a variety of replacements for countless makes and models.
( 1 )
$24.99
—
$47.99
$22.49
—
$43.19
Lokar offers bell crank kits designed for use with their automatic transmission shifters when mounting the shifter all the way forward on the main plate. The kits are available for different transmission applications, and they come complete with necessary hardware for installation.
( 3 )
$36.95
FiTech Can-Bus breakout harnesses connect FiTech fuel injection systems or transmission controllers with AutoMeter ICAN gauges, tachometers and speedometers. Order the harness needed for your application.
Not Yet Reviewed
$27.00
Dorman has you covered on all of your vehicle speed sensor needs. The speedometer gauge on your dashboard is getting its data from somewhere--and these are the units. Dorman takes pride in having produced high-quality OE replacement parts with state-of-the-art equipment since 1918. Take advantage of having access to an industry-leading brand originally intended only for dealers. Dorman vehicle speed sensors are available for many makes and models of cars and trucks. Match your vehicle specs with the sensor that'll get you back up to speed!
( 7 )
$25.99
—
$27.99
On Sale
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$30.99
—
$40.99
$27.89
—
$36.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
