Availability
Showing In Stock Items. Show All 1557 Items.
Dixxon Flannel Company "Never Slow, Always Low" flat bill foam trucker snapback hats feature 6-panel structured construction. They include mesh mid and rear panels. The front panels and visor are 65 percent polyester, 35 percent cotton. With screen-printed graphics on the center front, these surface washable ball caps will be a favorite lid on the road, at the track, or anywhere you want to flash some trucker attitude.
( 1 )
$26.99
Summit Bucks
The feed limit low valve in listed GM transmissions limits line pressure feed to the default disable solenoid and control valves. Feed limit low pressure is also connected to the boost ball system for "A" and "B" clutch control. This feed limit low valve is subject to significant side-load force, resulting in severe wear and pressure loss to the default disable solenoid and connected control valves. Such pressure loss can put the vehicle into default mode at high speeds, resulting in momentary wheel lockup, sudden downshift to 2nd gear, harsh shifts or a P0747 code. The feed limit low valve can wear out in as little as 30,000 miles, with many vehicles requiring service by 35,000 miles. A national recall from GM includes installing updated software that monitors valve performance and wear, then triggers a check engine light and reduced propulsion message 10,000 miles before failure. Vehicles are then limited to 5th gear, commonly referred to as limp mode, until the valve body is serviced to address the failed valve. Sonnax patented this drop-in feed limit low valve kit to overcome bore wear, restoring proper valve function immediately without the need or expense of replacing the entire valve body. The valve reroutes the balance circuit through an internal passage, significantly reducing the side-load force, while upgraded materials prevent future wear. * The kit overcomes drivability issues related to the GM 10-speed wheel lockup recall * Patented valve and sleeve combination overcomes bore wear and significantly reduces future side loading of the valve * Hardcoat anodized aluminum valve and wear-resistant sleeve combat premature wear * Drop-in Zip Valve parts install quickly and easily * Kit contents: -- Valve -- Sleeve -- Spring -- Retainer -- Drill -- Rivet (Note: The OE feed limit low valve is susceptible to premature wear and therefore a critical failure point. Replacing the valve is recommended even if the transmission isn't exhibiting problems and the valve passes a vacuum test.)
Not Yet Reviewed
$26.86
Astro Pneumatic Tools' 13-piece metric 1/4 in. low-profile Nano impact socket sets are designed for metric fasteners, offering a low-profile solution for restricted workspaces. Each metric socket measures less than 18.5mm, making them 20 percent shorter than standard shallow impact sockets. For additional versatility, the sockets boast an 11mm outside hex design, enabling wrench use for increased leverage. Sockets are made from forged CRO-MO steel for lasting durable performance. Product Overview: * Forged CRO-MO construction for long-lasting durability and performance * At less than 3/4 in. long (18.5mm), sockets are 20 percent shorter than shallow impact sockets * All sockets feature a 11mm outside hex for increased access when used with a wrench * 13-piece set includes metric sockets in sizes: 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm and 15mm * 1/4 in. drive for 1/4 in. ratchet or 1/4 in. impact use * Aluminum socket rail holder included to keep sockets organized * Astro Pneumatic Tool Company lifetime warranty
( 2 )
$34.99
Low Range Off-Road e-locker electrical switches make it easy for you. These simple back-lit locker-specific rocker switches efficiently operate e-locker motors, as LROF can attest to as they have used DPDT (Double Pole Double Throw) switches for years on these lockers and they work great. Plus, they make your dash look clean. Offered with front locker or rear locker marking, select the switch needed. Specifications: * DPDT ON/OFF/ON momentary switch * Single independently wired incandescent light * No rear barrier between terminals * Rated 20 amps at 12 V Please note: Switches are meant to be wired independently from the factory wiring. They are not meant for use with the factory e-locker controller.
Not Yet Reviewed
$31.87
Summit Racing Equipment® 2-stage system low 2.1 VOC clear coat is a high-solid urethane, rated at just 2.1 VOC. It provides the same excellent gloss, leveling, blending, and buffing characteristics as our standard 2-stage clear coats, so you can meet strict volatile organic compound standards without sacrificing quality. It's fast-drying, easy-to-apply, and requires mixing in a 4:1 ratio with Summit Racing™ 2.1 VOC clear coat hardener.
( 87 )
$42.99
—
$43.99
Low Range Off-Road leaf spring hangers are just like the very popular sloped-style hangers, but with an inside diameter of 3 in. and a 9/16 in. bolt hole. You can use these for mounting up the fixed end of the Chevy leaf spring on the popular Chevy spring swap with 5 in. overall length. The measurement from inside up to the center of the hole is 1 5/8 in. The hangers are made from 1/4 in. thick steel, with laser-cut slots in the top of the hanger for rosette welds if needed.
( 2 )
$34.91
SEM Products low VOC rubberized undercoating is 100 percent asphalt-free, fast-drying, and is even paintable. It's available in an easy-to-spray aerosol can to make application super-quick and easy. This unique product provides a protective barrier against rust and is also chip-resistant. It's great for rust-proofing wheelwells, fenders, and undercarriages on your vehicle and features sound-deadening properties. Make the right choice with SEM.
( 8 )
$25.99
Most Low Range Off-Road tie rod ends are made by 555, a brand known worldwide as the best in steering components. Original equipment for many Toyota applications, these factory-style tie rod ends are going to last much longer than off-brands … at a fraction of the cost that you would pay at the dealer or many auto parts stores. They are offered in inner and outer tie rod end styles for a variety of left or right side applications. Popular for years, Low Range Off Road heavy-duty FJ80 Land Cruiser tie rod ends are ideal for Toyota crossover steering applications. They offer more deflection than most other tie rod ends and are ideal for very flexible suspensions. LROR FJ80 tie rod ends also offer the advantages of an adjustable steering linkage, since they are available with both right hand and left hand threads. Plus, they include a castle nut, cotter pin, and jam nut. Note: LROR recommends replacing the jam nut as well (sold separately for some applications).
( 1 )
$45.53
If your door straps on your Suzuki Samurai have lost their fight with the Sun's UV rays and have become worn or have broken, replace them with these longer, 4-position adjustable door travel limiter straps from Low Range Off-Road! Use one of the four sewn loops in the strap to set the desired limit. Whether you want to make your doors open a little farther, or you need longer strap clearance for a roll cage, these Suzuki Samurai door limiting straps from Low-Range Off-Road are the perfect solution. Includes: * 4-Position adjustable nylon straps * Zinc-plated 3/16 in. thick ASTM A36 steel mounting brackets with fasteners * Handy Allen wrench hex key
Not Yet Reviewed
$45.54
Low Range Off-Road alternator conversion brackets allow you to upgrade to one of several common, larger alternators. They are laser-cut from plate steel and hand MIG-welded to perfection. Low Range Off-Road alternator conversion brackets are engineered for perfect alignment of the alternator belt, and include bracket mounting hardware. Looking to run bigger lights, a winch, or even just a better stereo system? Swap out your tiny stock alternator for more power, and mount it securely with LROR alternator brackets.
( 2 )
$37.87
Low Range Off-Road backing plate eliminators solve the problems caused by flimsy factory disc brake backing plates (also called dust shields). They often get bent from even the slightest touch. Small rocks can get trapped between the backing plate and the rotor causing noise and damage. LROR backing plate eliminator kits include two spacer rings that take the place of the OE backing plates. The rings are the same thickness as stock backing plates for proper component spacing. Low Range Off-Road dust shield eliminators are also available in an "Ultimate" version that not only eliminates the backing plate but also includes an integrated brake line holder. To prevent damage, they virtually eliminate all brake hard line movement. Additional features of Low Range Off-Road backing plate eliminators: * Easy installation, remove the OE backing plates and replace with LROR eliminators * Uses either OE or aftermarket spindle bolts/studs (sold separately) * Works with OE brake hard lines * Improved appearance * Increased rotor ventilation for better brake cooling
( 2 )
$45.46
Low Range Off-Road extended U-bolts are designed to fit a broad range of lifts. They are 2 in. longer than stock, but the threads begin in the same place as the OE ones. That means that Low Range Off-Road extended U-bolts work on stock applications while still fitting spring-over lifts, heavy-duty springs, and small lift blocks. LROR U-bolts are zinc-plated for corrosion resistance and come with matching nuts and washers.
Not Yet Reviewed
$43.46
On certain GM and Ford applications, a low oil warning sensor screws into a fitting in the OEM oil pan. If you have one of these models and choose not to use the sensor, Moroso offers these low oil pressure switch plugs. These plugs come with a copper washer .
( 3 )
$22.99
Low Range Off-Road front axle truss with gusset kits get your axles off-road ready. A weak point on some vehicles is the front axle, which can be susceptible to bending or warping causing misalignment, tire wear, and premature failure of front axle components. For any off-road usage, Low Range Off-Road recommends trussing your axle with their truss and gusset kits. They are a must for anyone planning to do a spring over axle swap or aftermarket suspension and tire upgrades. The truss is notched in the center of the gusset to accommodate the factory weld on the axle. Contents and additional features: * One upper truss * Two lower knuckle ball gussets * Easy stitch weld installation * Ships raw * Available with or without Low Range "LR" logo
Not Yet Reviewed
$42.50
Most modern transmission fluids have a few things in common: better heat and oxidation resistance, better shear stability so that the fluid doesn't lose viscosity over time, and a lower coefficient of friction needed for locking torque converters on modern cars. Lucas Multi-Vehicle ATF satisfies all these requirements; however, many cars and pickup trucks now use ATF that has a lower viscosity than traditional fluid, providing marginally better fuel economy. Lucas Oil Low Viscosity Synthetic Multi-Vehicle automatic transmission fluid is blended from premium API Group III synthetic base oils, combined with shear-stable viscosity modifiers and a high-quality additive package that includes anti-wear, anti-oxidants and corrosion inhibitors. * Primary Application: Recommended by Lucas Oil for any automatic transmission application where the vehicle owner's manual specifies a low viscosity fluid, either foreign or domestic, such as: Dexron VI, Mercon LV (& SP), Honda DW-1, Nissan Matic S (and W), Mitsubishi Dia Queen ATF J-3 and ATF-PA and many more.
( 5 )
$34.99
—
$47.59
Low Range Off-Road differential drop kits will keep your CV joint boots from tearing, while also preventing the premature CV joint wear normally caused by the increased angle. And the 12mm skid plate drop bolts ensure easy installation and removal in the future. Kits will include Grade 8 diff drop bolts for ultimate strength, serrated flange nuts for easy installation, precision CNC-machined skid plate drop spacers, and Class 10.9 12mm skid plate drop bolts. Some kits will also include Grade 8 hardened washers and precision CNC-machined differential drop spacers (in the correct length). Select the kit designed for your vehicle.
Not Yet Reviewed
$42.02
Enhance your front Jimny bumper with a Low Range Off-Road Jimny front bumper stinger. Made from .120 in. wall x 1.75 in. O.D. 1020 steel DOM tubing, they will help to protect your vehicle's headlights and grille. Stingers are available bare or with a durable black powdercoat finish. Increase your frontal protection with LROR's front bumper stingers.
Not Yet Reviewed
$46.00
Brembo Premium brake fluids have a higher boiling point that meet or exceeds the OE standard, offering superior resistance to the Vapor Lock and ensuring braking efficiency even at low temperatures. With high anti-corrosion properties that resist oxidation, Brembo brake fluid also allows for long-term unaltered chemical/physical characteristics of the fluid in the brake system—thereby preserving integrity of the system over time. Brembo DOT 4 low-viscosity brake fluid complies with DOT standards for Class 4, always guaranteeing safe braking. Select the size you need.
( 1 )
$20.63
Summit Racing™ offers low profile port plugs in a variety of AN sizes, ranging from -3 to -20 AN. Each plug is black anodized for protection and includes a rubber O-ring seal. The plugs are available individually or in a multi-piece kit with numerous sizes packaged in a handy storage case.
( 1 )
$21.99
Summit Bucks
Sonnax low sprag race and bearing kits are ideal replacements for lost or damaged components. They feature a thrust bearing, inner race, and 1.013 in. thickness. If you're looking for parts for your one-way clutch from an industry leader in cutting edge design, a Sonnax low sprag race and bearing kit fits the bill.
( 1 )
$29.76
DRP Performance ultra low drag hub seals are premium quality, full-PTFE lip seals. They offer less than 1 in.-lb. of resistance per seal. The lightweight aluminum house provides a true seal to prevent debris from getting to the hub bearings. Seals increase hub free spin and reduce drag and rotating weight. Reusable when removed properly. Order the size designed for your application.
Not Yet Reviewed
$23.85
—
$34.00
OER low-tension hood springs are designed for fiberglass hoods—and enable you to retain the original workings of your hood. These replacement springs will fit in the factory position and allow the hood to work like it was originally intended. Order the pair designed for your vehicle application.
( 3 )
$44.99
Summit Racing™ low-profile vehicle service ramps are portable heavy-duty plastic units that help to raise your vehicle, making it easier to get a hydraulic floor jack underneath, as well as easier and safer to load your low-profile car without touching the front bumper. Each ramp features a non-slip, mesh channel design to ensure a better experience on smooth surfaces, while making the ramp lightweight, more durable, and able to prevent oil, water, and debris from accumulating. Order a set for your garage. Key features: * 2.5 in. lift height * 8.6-degree loading angle * Anti-skid design with six anti-slip blocks on the bottom * PP (polypropylene) material makes ramps lightweight (3.5 lbs. each) and strong * 3-ton (6,600 lbs.) load capacity per pair * Ramp dimensions: 27.5 x 7.75 x 3 in. (905 x 330 x 215mm)
Not Yet Reviewed
$29.99
Allstar Performance low drag hub seals keep grease in the hub and on the wheel bearings where it belongs to reduce drag for improved performance. They are available for Howe, Allstar, Winters, SCP, and AFCO hubs, including 5 x 5 in. bolt circle and Wide 5 hubs (2.0 in. pin, 2.5 in. pin sizes, GN, and O-ring styles).
Not Yet Reviewed
$26.99
—
$27.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
