Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
133 Results Found For "chip"
Painless Performance VATS Computer Chips
Painless VATS computer chips allow you to bypass the factory programming, making the wiring in your engine swap a snap. Since 1989, most GM fuel injection systems have incorporated a Vehicle Anti-Theft System (VATS) programmed into the stock EPROM or PCM. This means the engine will not run if it is transplanted into a vehicle without the original vehicle steering column and decoder module. If you have one of these engines and your computer has the factory programming, you need Painless VATS computer chips to make your job trouble-free.
( 11 )
$49.99
SCT Eliminator Switch Chips
SCT single program and 5-program, 4-bank custom eliminator switch chips are tuned for specific car and truck applications. Order the module recommended for your vehicle. Features include: * Can be custom tuned by one of SCT's Custom Tuning dealers worldwide * Installation only takes 10-15 minutes with standard hand tools * Perfect for nitrous or towing applications. Switch tunes on the fly or at the track * Mountable switch panel for easy access to switching tune files * Built-in anti-theft selection that disables PCM and prevents the vehicle from starting NOTE: This product does not support any changes to your vehicle's emission system.
( 2 )
$31.99
JMS Chip MAF Harnesses
Need to extend or adapt your MAF wire harness in your vehicle? Simply use JMS Chip MAF harnesses! They're a great plug-and-play option, so MAF relocation anywhere is not a problem. These harnesses use OE-quality plugs and are direct plug-and-play extension harnesses designed to provide a quick and clean installation--no cutting or splicing wires is required.
( 2 )
$49.75
JMS Chip Wiring Pigtails
JMS Chip offers electrical wiring pigtails for a variety of applications. These can be used to replace a worn or modified MAF connector, convert your vehicle from one sensor to another, or facilitate a custom build. Whether it's tracking mass airflow or streaming engine data to your onboard computer, JMS Chip supplies the equipment and accessories you need for top performance.
( 2 )
$30.75
JMS Chip PedalMAX Remote Throttle Knobs
A bit touchy? JMS Chip PedalMAX remote throttle knobs override the settings of your JMS unit. Simply plug them in and adjust the sensitivity of your throttle. The kits include a remote voltage knob and wire.
( 4 )
$49.75
Evolution Magnetic Metal Chip Collectors
Fabricating in steel can be a messy business. Evolution magnetic metal chip collectors are the perfect tool to quickly clean up your metal shavings and scrap pieces. These magnetic metal chip collectors are like "magic wands"—simply wave over metal shavings to pick them up, carry them over to your scrap barrel, pull the plunger, and the shavings are neatly disposed of. The magnet is strong enough to quickly clean up your biggest mess of metal shavings. The Evolution magnetic metal chip collectors can also be used to pick up small parts such as nuts and bolts or parts from your CNC plasma table. They're so handy that you'll want one by all of your machines!
Not Yet Reviewed
$32.99
Clearance
SEM Products Chip Guard
Lower panel protection is just a spray away with SEM Products Chip Guard coatings. Your vehicle's lower panels can take a beating. So, when you refinish your ride, why not guard against chipping and corrosion with easy-to-use aerosol Chip Guard coatings? SEM has been delivering quality refinishing products for over half a century and their aerosols offer the same quality. Formulated to duplicate a variety of OEM textures, these spray coatings save you time and are paintable. Protect your project from the unforgiving road with SEM Products Chip Guard coatings.
( 17 )
$59.99
$33.99
—
$35.99
On Sale
Oracle LED Replacement Bulbs
Oracle LEDs are a great way to add street-legal awesomeness to your ride! Oracle offers many wallet-friendly replacements that will update the style and lighting performance of your vehicle. Their extensive selection includes exterior LED bulbs for headlights, fog lights, daytime runners, and turn signals—plus interior lights to illuminate your vehicle's look, inside and out. And, of course, LEDs are not only brilliant, but also emit very little heat and consume little power, so the awe-inspiring brightness will last longer without yellowing, hazing, or micro-cracking. The look is expensive and high-tech, but the price is affordable; let Oracle Lighting LED replacement bulbs brighten your world!
( 32 )
$21.50
Steel-It Polyurethane Topcoats
STEEL-IT Polyurethane paint topcoats feature custom-engineered, 316L stainless steel flake and provide superior protection against corrosion, abrasion, salt, alkalis and other chemicals. These aerosol coatings provide the added benefit of being weldable, UV-resistant, and USDA compliant for incidental food contact. STEEL-IT Polyurethane withstands high-pressure washdowns and detergents without chipping or flaking, a critical feature in so many applications across industries. Available in a half-dozen color options, individually or in a set of 12. Additional details: * Superior anti-corrosion coating * Single component coating that air dries * Handy aerosol for easy-to-apply original jobs and touch-up work * Weldable! No need to grind off the coating when repairs or add-ons are required * Temperature rating: 200 degrees F * The identical, high-quality coating as the Polyurethane Topcoat options are available in quarts and gallons
Not Yet Reviewed
$29.99
POR-15 Top Coat Paint
You're restoring frames, chassis components, and underhood parts. Do you need help? Call on the rust-busters at POR-15. Their engineers have rust on the run with their tested and proven technology. POR-15 Top Coat paint is one of several specialized topcoats that you can use over POR-15 rust preventive paint for the toughest, most permanent defense against rust and corrosion. These topcoats are highly flexible, extremely scratch and chip-resistant, and non-porous to seal out moisture. No moisture means no rust. Restoration takes a lot of time and money. Why let your dream ride become a pile of rust? POR-15 Top Coat paint is armor for your restoration project. Choose the gloss or semi-gloss needed in a pint, quart, gallon, or 14 oz. spray can.
( 90 )
$29.45
—
$33.92
BDS Suspension NX2 Steering Stabilizers
BDS Suspension offers steering stabilizer kits with NX2 shocks for a variety of applications, including many Chevy, GMC, Dodge, Jeep, Ram, and Ford vehicles from 1973 and up. The stabilizers are available in single (for stock/lifted) or dual inline (for lifted) designs. These components will enhance the handling of your truck or SUV. Installing larger tires can exert additional force on your suspension, but steering stabilizer shocks can effectively reduce bump steer and steering wheel feedback. BDS mounting brackets are constructed of high-strength steel and can be easily bolted on. The BDS NX2 stabilizer uses a pressurized nitrogen-charged twin-tube design with 10-stage velocity-sensitive valving for lightning-fast dampening adaptive to whatever terrain you traverse, on- or off-road. The 2-inch bodied shocks use a large 1 3/8 in. fluon-banded piston, self-lubricating seals and a 14mm hardened chrome shaft to help resist rock chips and corrosion.
( 8 )
$49.95
Summit Racing™ Single Stage Paints
Summit Racing™ single stage paints are top-of-the-line automotive and fleet color systems. These single-stage urethane topcoats are available in a variety of color packages. Urethane paints are catalyzed systems, offering a premium finish with exceptional durability that far surpasses enamel-based systems. Manufactured with top-quality raw materials and advanced technology, these paints will never yellow with age. They are designed to be used in a single-stage application or in combination with a urethane clearcoat (except hot rod black) for additional durability and gloss. Summit Racing™ single stage paints are also highly resistant to harmful UV exposure, dangerous chemicals, everyday weathering, and aggravating stone chips. They mix at a 4:1 ratio, so when a gallon of paint is mixed with our activator (sold separately), you get a full 5 qts. of usable paint. All of our Summit Racing™ urethane paint colors are unique. They are not designed or intended to match a factory color or a color of another paint brand, even if the color name is the same or similar. Requires the use of activator for proper finishing. Color may vary depending upon your monitor settings. Please see suggested parts tab for chip chart for colors.
( 584 )
$34.99
—
$49.99
FLUID FILM Lubricant and Corrosion Protector
When the U.S. Navy needed to conquer rust and corrosion in the ballast tanks of its vessels in World War II, FLUID FILM was the weapon they chose. The film penetrated corrosion and rust quickly. Application was simple. Protective action was long-lasting and economical. The destructive force of corrosion is often the single greatest threat to your vehicle. Consistent exposure to rain, wind, and snow can lead to rapid deterioration, not only resulting in poor appearance and loss of value, but safety issues as well. Road salt, brine, and debris cling to vehicle under-bodies, eating away at metal and electrical connections. FLUID FILM Aerosol (AS) and Non-Aerosol (NAS) is manufactured using an intricate heating and blending process that combines specially processed wool-wax, highly refined petroleum oils, and corrosion inhibitors; creating a unique, lanolin-based formulation that stops existing rust on contact. Penetrating immediately, it creates a fluid, self-healing barrier that is always active and will not chip or crack. Features and benefits of FLUID FILM AS and NAS corrosion protector: * Exceptional lubricating properties; penetrates to stop squeaks and provide lasting lubricity for all moving parts * Provides metal wetting and water displacement * Salvages heavily corroded or frozen parts * No solvents; non-toxic * Electrically non-conductive with a high flash point and a thin, flexible composition * Perfect protectant for battery terminals and electrical connections * Safe for use on all metals * Stops chrome and aluminum pitting * Will not harm most paints or plastic Notes: * May cause swelling of non-oil-resistant rubber goods. * May soften some vehicle undercoatings and undercoating-type paints; check with dealer/manufacturer for compatibility. * FLUID FILM AS is extremely flammable until applied. * FLUID FILM NAS is non-flammable.
( 62 )
$36.99
—
$49.99
Summit Racing™ Hot Rod Flat Paints
If you like that "hot rod flat" finish that's all the rage with the rodders and custom car builders, Summit Racing™ hot rod flat paints are available in your choice of colors! These single-stage paints are top-of-the-line for your project. Designed for the DIY painter, Summit Racing™ hot rod flat paint is easy to apply; the flash time between coats is just minutes, and it dries in less than an hour. By eliminating many of the complicated application steps, you are able to reduce the overall cost of your refinishing project! Summit Racing™ hot rod flat paint is designed for use with our complementary line of primers, sealers, reducers, hardeners, cleaners, and specialty additives, and is formulated to provide professional-grade results at home. Summit Racing™ single stage urethane paint is also highly resistant to harmful UV exposure, dangerous chemicals, everyday weathering, and aggravating stone chips. It mixes at a 4:1 ratio, so when a gallon of paint is mixed with our activator (sold separately), you get a full 5 quarts of usable paint. All of our Summit Racing™ Urethane paint colors are unique. They are not designed or intended to match a factory color or a color of another paint brand, even if the color name is the same or similar. Requires the use of activator for proper finishing. Color may vary depending upon your monitor settings. Please see suggested parts tab for chip chart for colors.
( 135 )
$34.99
—
$48.99
Deltran Battery Waterproof 800 Charging Systems
These Deltran Battery Waterproof 800 charging systems incorporate surface-mounted circuit board componentry along with total epoxy encapsulation. They pack 800 milliamps of pure current charging power. Coupled with a brain (IC chip), the chargers will constantly monitor, charge, and then maintain your battery. Additional benefits include: * Super-smart technology * Short circuit protection * Reverse polarity protection * Waterproof * Weigh only 1 lb. * 3-year warranty
( 34 )
$49.95
Moroso Oil System Filter Fittings
Moroso oil system filter fittings are designed to stop metal chips and debris from reaching external or dry sump oil systems or rear-end lube pumps. These filter fittings have a stainless steel screen and use a .015 in. diameter, 16-mesh wire.
( 1 )
$41.99
POR-15 Rubberized Undercoating
POR-15 rubberized undercoating is a flexible, paintable black coating. It is the only undercoating with POR-15 technology and will protect against moisture, dust, heat, and cold. It's an excellent moisture barrier for application over auto body repairs and creates an effective sound barrier that reduces vibration and deadens sound in wheelwells, quarter panels, fenders, and undercarriages. It provides superior adhesion to both painted and unpainted surfaces. POR-15 rubberized undercoating has superior resistance to road salt and will resist chipping and abrasions. It may be used to insulate against engine and muffler noise, dust penetration, and exhaust fumes.
( 17 )
$29.44
Body Parts Bumper Deflectors
Body Parts bumper deflectors deliver the same OE-quality for less. Designed from quality materials, they offer the fit and function to restore or repair your ride. These replacement deflectors not only add a finished look to your bumper, they also help protect your vehicle against rock chips, road debris, and more. Order the model designed to fit your application.
( 11 )
$20.99
—
$41.99
McGard Drag Racing Lug Nuts
These McGard drag racing lug nuts are designed to be lightweight and strong and are proof-load tested to 160,000 psi. They are machined from special high-quality steel and then hardened and tempered for strength and durability. Their triple-nickel chrome plating is guaranteed for life not to chip, peel, or rust. For street use, the black nylon Allen plug can be left in place. For the strip or Pro Street cars, unscrew the plug to allow for the use of extra-long NHRA-approved studs.
( 84 )
$24.99
—
$36.99
POR-15 Rust Preventative Paints
Call on POR-15 to restore your car with a rock-hard, non-porous finish that won't chip, crack, or peel. This paint also prevents recurring rust by sealing your metal against exposure to moisture. The high-tech, high performance, rust-preventive coating is designed for direct application on rusted metal surfaces—and it not only covers the existing rust, it also prevents the reoccurrence of rust. Available in clear, black, silver, and gray, POR-15 is ideal for a quick improvement. Choose gloss or semi-gloss, in sizes ranging from a pint to a gallon. POR-15 is sensitive to ultraviolet light and should have a topcoat applied to prevent UV damage, especially in areas that will be exposed to the sun for extended amounts of time.
( 315 )
$36.09
—
$43.45
Standard Motor QWIK-Sensor TPMS Sensors
Complementing Standard Motor OE-Match TPMS sensors, the QWIK-Sensor TPMS sensors offer technicians the ease of programming, along with advanced technology—and 94 percent coverage for domestic and import vehicles. Standard Motor's QWIK-Sensor multi-coverage programmable TPMS sensors come fully-assembled from the factory, so they're ready to be programmed, OE-relearned, or ID-cloned to your vehicle using any major TPMS tool. When it comes to tire pressure monitoring, Standard Motor QWIK-Sensors TPMS sensors make it quick! Sensors are available in different frequencies and inflation valve options. Additional features and benefits: * QWIK-Sensors feature nickel-plated valve cores and aircraft-grade 6061 aluminum clamp-in valve stems to prevent premature breaking and resist galvanic corrosion * QWIK-Sensors must be programmed before installation on vehicle * Designed and manufactured to meet or exceed OE performance in compliance with all SAE2657 specifications * Unique ID-cloning functionality allows you to clone/copy unique ID from one sensor to another * External-crystal oscillator provides frequency stability for more reliable communications between sensors and vehicle receivers * Z-axis or dual XY-axis accelerometers on IC chip ensure more precise readings on tire positions and rotational direction * Validated at independent lab during 168-hour on-vehicle live test * Military-grade lithium battery ensures maximum battery life and sensor performance * Low-power wakeup timer and periodic reset driven by Low-Frequency Output (LFO) maximizes shelf life, extends battery life, and maintains optimum performance levels *QWIK-Sensor TPMS sensors have undergone extensive testing—including operational temperature, thermal shock, extreme temperature, humidity, frost, proof pressure, rapid deflation, contamination, salt fog, drop, centrifugal force vehicle speed, mechanical vibration tests—to ensure durability
( 6 )
$30.99
—
$40.99
US Chemical PRO-GLAZE Glazing Putty
US Chemical PRO-GLAZE glazing putty is one of the most advanced polyester finishing/blending putties available. The high-tech resins deliver maximum adhesion, excellent workability, plus unbeatable sanding for minor bodywork and surface imperfections. Sand, scrapes, chips, pinholes, and scratches don't stand a chance! Expect a pinhole-free, smooth surface that is stain and tack-free with US Chemical PRO-GLAZE glazing putty. Features and specs: * Can be used on steel, aluminum, fiberglass, body filler, wood, 2K primer, OEM top coats, galvanized and zinc-coated steel, and sheet molding compound (SMC) * Can be top coated with polyester, 2K urethane, or 1K primer * Ideal for use over body filler * Mix ratio: 2 percent by weight (50:1 ratio) with supplied cream hardener
( 8 )
$43.99
Summit Racing™ Candy Paints
Summit Racing™ Candy paints are top-of-the-line custom automotive refinish color systems. These single-stage urethane topcoats are available in a variety of bold, bright colors. They can be used in their original pure tones or blended to create entirely new shades. Apply over different ground coats for unlimited customizability. Urethane Candy paints are catalyzed systems, offering a premium finish with exceptional durability that far surpasses enamel-based systems. Because they are made from unique OE-grade transparent pigments, they are far more lightfast than dye-based candy colors. Summit Racing™ urethane candy paints are also highly resistant to harmful UV exposure, dangerous chemicals, everyday weathering, and aggravating stone chips. These Candy paints mix 4:1 with Summit Racing™ universal urethane activator (sold separately). All of our Summit Racing urethane paint colors are unique. They are not designed or intended to match a factory color or a color of another paint brand, even if the color name is the same or similar. Requires the use of activator for proper finishing. Color may vary depending upon your monitor settings. Please see suggested parts tab for chip chart for colors.
( 15 )
$37.99
—
$46.99
POR-15 High Temperature Paint
POR-15 high temperature paint is guaranteed to maintain rich, brilliant colors without burning off or discoloring. It can withstand extreme temperatures up to 1,200 degrees F and will resist cracking, chipping, and peeling. This paint is also extremely resistant to weather, salt, and moisture. The manufacturer guarantees it to be the most uniform heat-resistant coating available anywhere. Sandblasting is the optimum surface preparation. POR-15 high temperature paint can be used on all cars, domestic or foreign, and meets or exceeds properties and requirements of MIL-C-13370. It's available in multiple color and application options.
( 40 )
$27.78
—
$32.51
